Graphics Card Error - Monitor Buzzing And Display Driver Failure
Oct 19, 2011
about a year ago I had a problem with my pc where I would get the error message "display driver has stopped responding and has successfully recovered" and the occasional BSOD. I solved this problem by simply flashing my bios. However a similar problem has now arrived ( note I have not changed any hardware since the last error) where:
- There is a constant buzzing from my monitor ( NOT a problem with the monitor as it works fine in safe mode with no buzzing, which is why I suspect a gpu problem)
- I get random "display driver has stopped responding and has successfully recovered" messages, but no BSODs. OR the display just goes black and I have to hard reset my pc.
I just installed my ATI Radeon X1950 XT sapphire graphics card to my computer. I inserted it into the slot and plugged it in. Now when I turn on my computer the monitor keeps getting the Check Signal Cable error. I have it plugged in properly and everything not sure what is going on.
i just bought a new video card (EVGA GTX260) yesterday and installed it and played with it with no problem....(one day later)......until now so basically here what happens now. when i boot up it goes through the "starting up" phase and when the window 7 says "Welcome" after that i just get a blue screen, no word no picture just blue!
So i press the reset button and i am only able to go to my desktop menu by safe mode! and if i try to go through "start up computer regular" it would just lead me to the blue plane screen....
The reason why i think it is the driver is because in safe mode i am able to uninstall my nvidia driver. Restart and WOW i am back to my "REGULAR" desktop menu but with no driver. SO as soon as i am on my screen Window 7 wants install the newly detected video card's drivers for me and i do. when i restart BAM! back to the blue screen..
After I reformatted windows 7 I notice that it looked funny and that my graphics card was set to standard and my monitor was set to generic pnp monitor. Ive downloaded the graphic card drivers from amd but they still dont show up.
Windows 7 Home Premium (x64) Service Pack 1 (build 7601) Dell Inc. Studio XPS 1645 A13 System Service Tag: 2T6BCN1 (support for this PC) Chassis Serial Number: 2T6BCN1 Enclosure Type: Portable
To wits end I am stumped after installing a new SSD HD today and clean install of Windows 7 Home Premium 32 bit OS.The problem I am having is that in device manager under Display Adapters it list Standard VGA Graphics Adapter. Also for Monitors it Lists Generic PnP Monitor.I have downloaded and updated the latest drivers for each hardware and a I am still getting the same result.This is frustrating since I could not image my old version of Windows 7 from a larger,slower HD to the new/faster SSD HD. Windows 7 imaging suggests that the new HD must be larger than the old HD in order to do an image restore.I have read this is not the case however found that in no way have I been able to successfully image restore my old OS from the larger HD to the new smaller SSD HD.
ok I have no idea on this one and the good news is i can't fix it LOL.
i have an hp m9340f purchased a couple new nvidea graphics cards when I started getting the noisy fan issue .
Installed windows 7 everything worked great but was having problems with windows media center after I went to a 56k connection so i decided to format start over,
Everytime it installs the drivers for my nvidea graphics card my monitor goes black and has no signal. i tried both dif cards. same problem. I am guessing it is the recommended settings but since I only have one monitor I can't change the settings cause.. can't see to do it, and I have no other monitor to hook to to try.
I can start up in safe mode so any idea's how to fix this issue or change it all to 800 x 600 so i can see when it starts up with new drivers .....
i have a compaq persario sr1630nx i just remove the graphics card i had on it do to a malfunction. and i plugged in my monitor to the original input and it looks all blurry?
I don't know what it is but Windows 7 doesn't recognize my graphics card for some reason....... I have scanned several times for driver updates, still nothing seems to fix my problem.I don't know what causes this, dxdiag displays everything else properly as far as I know. [code]
i have this big problem is that my graphics card as a problem that in almost 2 years it never did thisi never had problems with this computerbut what happend is that i use a LCD screen the resolution is use is 1768x992 and i use a Nvidia GeForce 9800 GT graphics card what happends is that when i turn the computer on i see the screen with ALOT of lines with weird colors and i thought this was a drivers problem so i installed the graphics card drive and clean the PC up for the 2nd time nothing worked so i tried formating it but i doubt it that would work because those lines where there so yeai did manage on getting a screen cap from the windows and it looks like thishe weird part is that the lines and stuff that appear on the screen as well dont show up on the picture so i tried using another monitor and it had the same resultim using Windows Ultimate 32 bit i have my graphics card connected to my TV(LCD) with a HDMI cable i thought it could be that so i tried another cable it didnt work so at this point i ran out of ideas
I got a new video card at work to install and nothing will show up when I plug it in. I can go through the computers VGA and it works fine, but when I go to the video card only a black screen. Any help? Can't download drivers either, only black screen upon boot.
I just accidentally changed my settings on my grapics card so that I can no longer see my desktop on the monitor connected to my HTPC. My HTPC has a monitor attached to it and it also has an HDMI out from the graphics card going to an LED TV in another room. I accidentally switched it so that the desktop can only be seen on the other TV in the other room.
All I can see on the monitor is the blank Windows 7 logo (no desktop icons) and I cannot navigate back to my AMD control page to undo this. I tried rebooting but this does not work. This is an issue as I don't have a bluetooth keyboard/mouse that I can use in the other room to control the desktop. How do I reset this? I am using a AMD HD 6750 graphics card.
Graphics card(SAPPHIRE 7950 3GB with Boost) does not indicate any error, it never gets above 50C, there are no artifacts, and it runs smooth as butter when it works(Hitman Absolution and Shogun total war 2).CPU doesn't overheat either, my NH-D14 keeps it(3930k) cool at below 50C at all times.
Fixes already tried:
Changing SATA cable on SSD Reseating GPU/Power connections reinstalling drivers/installing new drivers updating BIOS underclocking GPU.
There are no bluescreens, error codes, or anything of that sort, it freezes the frame and a loud buzzing comes from the monitor.Games are all installed on the SSD(Intel 520 Cherryville 180GB)Games ran through Steam new build, used less than 5 hours, max.After turning off the computer for a period of time, it'll let me play for 20-ish minutes, but then trying to reboot and play again results in near instant crash(2-5 minutes of play).
I have an Acer Aspire 7741z-4433 with an Intel(R) Pentium(R) p6200 (2.13 GHz, 3MB 1.3 cache). This only happens to me while I am playing The Sims 3. I have the game set on the lowest quality settings, even though my laptop "claims" to be HD LED, etc. This issue still happens. As you may know I cannot replace the graphics card as it is apart of the motherboard, and to buy a new motherboard with a better graphics card would cost more than a new computer. I have been the my manufacture's website and tried installing an update of the graphics card, and that didn't do the trick either. I am at my wits end, and I just want to play the game without it shutting down and freezing my computer. The reason I know the error is because I do Alt + Tab to get back to the desktop. The way it acts up while I am in game is the screen blacks out but I can still see the software's mouse, and then it blinks a couple times and then freezes completely?
I am getting a playbackmessage on my HTPC in WMC saying:
"Video playback is not currently allowed. This is often due to incorrect drivers for your graphics card, because the card has less than 64MB of memory or because the card id not DirectX 9 compatible."
I am using a Saphire Radeon HG6750. Which should be more than fine. And the onboard card on my Motherboard should also be fine.
Everything was working fine. I have been fiddling with my display options as I have my HTPC feeding three 1080p TVs via a Gefen HDMI switch. Finally got it so that all three TVs are displaying at 1080p and then my playback errors start.
[As a side note, I have been noticing that when I remote in via a laptop that I get AMD error messages. I think this is regarding my onboard card. When you remote in, the HG6750 does not show up in the Tray. It defaults to the onboard card]
I present a dilemma and acquire some assistance with anyone who is tech savvy in computers. Before I describe my problem, I just want to let you know that I have searched for this error and received no solution. But, I believe I have narrowed down what the problem is and I have a strong feeling it has something to do with or revolving around my graphics card(?). I have a report that I saved in my notepad here after the BSOD and it states that it will help describe my problem but I cannot locate it within my computer files(?) (Doesn't show up.)Any game I try to run will crash randomly, even with the settings on low, so I figured it's graphics related(?) I hope anyone can decipher this, it's very confusing and certainly frustrating. I have tried anti-virus scans, registry cleaners, even cleaning out my computer, everything seems to be in place and running fine, the whole nine yards. [code]
I installed a new graphics card (MSI N670 PE 2GD5/OC) and since then my computer has been very unstable and is crashing a lot. The card is factory overclocked and I think it is faulty. Do you know of a way to underclock the card, so I can test if it is the overclock?
PSU: Enermax EMG700AWT
*edit*So I used Afterburner to set my core clock to -104 and my power limit to 72% and this causes my card to boost to about 980MHz. With these settings the crashing has stopped. So the card cannot be used with the factory OC settings. So should I RMA?
I've completed a new custom build, but have had problems with BSOD from the beginning with any installation of Intel Graphics drivers or the installation of any graphics card.
When I first completed the build, the XFX-7950 Black was installed. I booted to BIOS without issue, but when I inserted the Windows 7 (64 bit) it would boot through the windows logo screen but immediately BSOD right after going to the first install screen.
I removed the graphics card, and was able to complete the full Windows install without issue. I updated Windows and the drivers on the system but as soon as I installed the Intel 3000 Graphics driver, it would BSOD on every restart. I recovered back prior to the Graphics driver install and installed all other drivers. I updated the BIOS to the latest version.
I have reattempted the XFX 7950 multiple times in different slots, but with the same results. I also attempted my Radeon HD 4550 from my old computer but it gave the same results. It always boots through the Windows logo screen, but BSOD within a few seconds of reaching the password screen.
I broke down and installed Driver Whiz, which did detect multiple outdated drivers that I had not caught, but none of these fix the issues.
I've attached the requested zip. I don't think all BSOD's are showing up, as I've had to use recovery points after installed drivers didn't work. The last .dmp on 19 JUL was a Intel Graphics driver install attempt that I pulled off in safe mode before recovering back to the pre-driver point.
System: ASUS P8Z68-V Pro/GEN 3 Intel 2600K XFX R7950 Black Edition OCZ 850W Crucial 128 GB SSD Seagate Barracuda 1 TB HD Corsair H100 Windows 7 64 bit (full)
Everytime I use explorer on my Toshiba Satellite laptop, my screen turns black and then displays the the intel graphics accelerator drivers has stopped responding and has recovered. Im very frustrated with this as to it is really causing my pc to not work properly. Any input would be very helpful.
my system shows repeated blue-screens, restarting as many times,whenever you-tube gets opened systems gets stopped,ten often shows display drivers stopped responding and recovered successfully after a blink.
I get an error message saying "Display driver Intel Graphics Accelerator Drivers for Windows XP(R) stopped responding and has successfully recovered." I do, however, have Windows 7 Professional 32-bit. The screen turns black and then flashes white. I can only resume use of my computer if I close out all my chrome tabs multiple times and reopen them.
I have a dell inspiron 6000 and I got mobile intel 915GM/GMS,910GML express chipset family for my graphics card driver. I want to play the Dimension U game, so I have to update my graphics card driver. But I can't
have been having a problem since the time i switched over to win 7 64 bit from XP 32 bit..Got the win 7 7264 (64 bit) setup on my comp. tried installing the latest driver downloaded from Nvidia , 190.38 for my GTX 260 (Palit), but for some reason the installation doesnt proceed. have been facing the same problem with Vista and XP (both 64 bit) now..
the installation progress bar reaches around 30% and d monitor restarts and then the bar is still at d same position it earlier was and doesn move. have tried a few other drivers like 182.50 but for some reason none of these drivers gets installed..
the only breakthrough i had was when i installed it in win XP 64 bit when it started popping up the driver signature error..i believe the same issue is happening in Win 7 and Vista too but not sure.
So I've been trying to install a new graphics card update called "Nvidia update components 1.8.15" which I'm not sure if i really need it but I've been having a lot of problems with games like Call Of Duty: Black Ops lagging and I'm thinking I need this update but when I go to update my card it says it Failed here's a picture and my specs...
Operating system is windows 7 (64-bit) Graphics Card is GEFORCE GT 540M Processor Intel i7 2.00 (turbo boost up to 2.9 quad core) Ram 8 GB
I have a graphics card usr5699b that was working for a short time on win 7 but after 2 days it caused my video cards to mess up possible driver issue or irq conflict. Is there anyway to make the drivers compatible with win 7?
I am running XP and intend to go to Windows 7 shortly. I want to cover all of my bases and get my updated graphic driver before the switch. I went to the manufactuer site and they did not have Windows 7 drivers listed yet. I have seen other posts on here about updating Mirage 3 drivers and was wondering where they got them.
