i just bought a new video card (EVGA GTX260) yesterday and installed it and played with it with no problem....(one day later)......until now so basically here what happens now. when i boot up it goes through the "starting up" phase and when the window 7 says "Welcome" after that i just get a blue screen, no word no picture just blue!
So i press the reset button and i am only able to go to my desktop menu by safe mode! and if i try to go through "start up computer regular" it would just lead me to the blue plane screen....
The reason why i think it is the driver is because in safe mode i am able to uninstall my nvidia driver. Restart and WOW i am back to my "REGULAR" desktop menu but with no driver. SO as soon as i am on my screen Window 7 wants install the newly detected video card's drivers for me and i do. when i restart BAM! back to the blue screen..
i have a digital monitor that i am now using with my EVGA 260 video card, i have an old analog flat screen monitor that i would like to use, they are not the same size, digital is 19 analog is 17, if i connect my anolog screen to my motherboard on board vga connector, how would i go about setting it up my system to use both monitors,
I purchased diablo 3 for my husband & my video card is not supported so he's unable to play, my computer is a HP P624 f-b desktop with a Intel GMA intregrated graphics, I am aware I need to up my power supply also, I have no idea what video card can be used to upgrade so the game is playable, not looking to spend a fortune?
about a year ago I had a problem with my pc where I would get the error message "display driver has stopped responding and has successfully recovered" and the occasional BSOD. I solved this problem by simply flashing my bios. However a similar problem has now arrived ( note I have not changed any hardware since the last error) where:
- There is a constant buzzing from my monitor ( NOT a problem with the monitor as it works fine in safe mode with no buzzing, which is why I suspect a gpu problem)
- I get random "display driver has stopped responding and has successfully recovered" messages, but no BSODs. OR the display just goes black and I have to hard reset my pc.
i've come across Age of Empires 2 and AoC expansion and want to play them, however get a graphics system error."Could not initialize graphics system. Make sure that your video card and driver are compatible with DirectDraw"
My specs are:
Dell Inspiron 545 Operating System: Windows 7 Home Premium 64bit, Processor: Intel(R) Core(TM)2 Quad CPU Q8300 @2.50GHz Memory: 6.00GB Graphics Card: ATI Radeon HD 4350
- I've tried to right click the shortcut and change the compatability to XP server pack 2, run as administrator, updated my graphics card drivers and downloaded the latest directX 11 from the Microsoft Website.
Just upgraded from Vista Business 32bit to Win 7 Pro 32 bit AOE working fine before upgrade but now error shown as:"Could not initialize graphics system. Make sure that your video card and driver are compatible with DirectDraw"I've checked the drivers are the latest. Directx is ver 11. DirectDraw enabled. Video card is ATI Radeon HD 3650 with latest driver.Tried compatibility modes, disabling Aero, re-install AOE, XP virtual mode. Nothing works.
My ATI HD3870 video card wont work...Upon downloading the windows 7 ATI CCC it informs me that there has been an error installing the driver...only for it to actually show up in the device manager as working, but then when I try to restart to set my MOBO to use it, I get a BSOD from atikmdag.sys
error code 0x00000116
my Realtek AC'97 on-board audio card was working until reboot just like in another thread on this forum. At this point, however, isn't even showing up on the unknown devices list, nor ANYWHERE else on the Device Manager...
Also there's an unrecognized and unsupported piece of hardware on my mobo (ACPIAWY0001.....WTF is this thing!?) I cant even begin to find drivers that might go to it for Win7x64
can anyone offer fixes for these problems? or should I just go back to vistax32? at least everything worked on there...
I am getting a playbackmessage on my HTPC in WMC saying:
"Video playback is not currently allowed. This is often due to incorrect drivers for your graphics card, because the card has less than 64MB of memory or because the card id not DirectX 9 compatible."
I am using a Saphire Radeon HG6750. Which should be more than fine. And the onboard card on my Motherboard should also be fine.
Everything was working fine. I have been fiddling with my display options as I have my HTPC feeding three 1080p TVs via a Gefen HDMI switch. Finally got it so that all three TVs are displaying at 1080p and then my playback errors start.
[As a side note, I have been noticing that when I remote in via a laptop that I get AMD error messages. I think this is regarding my onboard card. When you remote in, the HG6750 does not show up in the Tray. It defaults to the onboard card]
I present a dilemma and acquire some assistance with anyone who is tech savvy in computers. Before I describe my problem, I just want to let you know that I have searched for this error and received no solution. But, I believe I have narrowed down what the problem is and I have a strong feeling it has something to do with or revolving around my graphics card(?). I have a report that I saved in my notepad here after the BSOD and it states that it will help describe my problem but I cannot locate it within my computer files(?) (Doesn't show up.)Any game I try to run will crash randomly, even with the settings on low, so I figured it's graphics related(?) I hope anyone can decipher this, it's very confusing and certainly frustrating. I have tried anti-virus scans, registry cleaners, even cleaning out my computer, everything seems to be in place and running fine, the whole nine yards. [code]
I installed a new graphics card (MSI N670 PE 2GD5/OC) and since then my computer has been very unstable and is crashing a lot. The card is factory overclocked and I think it is faulty. Do you know of a way to underclock the card, so I can test if it is the overclock?
PSU: Enermax EMG700AWT
*edit*So I used Afterburner to set my core clock to -104 and my power limit to 72% and this causes my card to boost to about 980MHz. With these settings the crashing has stopped. So the card cannot be used with the factory OC settings. So should I RMA?
I've completed a new custom build, but have had problems with BSOD from the beginning with any installation of Intel Graphics drivers or the installation of any graphics card.
When I first completed the build, the XFX-7950 Black was installed. I booted to BIOS without issue, but when I inserted the Windows 7 (64 bit) it would boot through the windows logo screen but immediately BSOD right after going to the first install screen.
I removed the graphics card, and was able to complete the full Windows install without issue. I updated Windows and the drivers on the system but as soon as I installed the Intel 3000 Graphics driver, it would BSOD on every restart. I recovered back prior to the Graphics driver install and installed all other drivers. I updated the BIOS to the latest version.
I have reattempted the XFX 7950 multiple times in different slots, but with the same results. I also attempted my Radeon HD 4550 from my old computer but it gave the same results. It always boots through the Windows logo screen, but BSOD within a few seconds of reaching the password screen.
I broke down and installed Driver Whiz, which did detect multiple outdated drivers that I had not caught, but none of these fix the issues.
I've attached the requested zip. I don't think all BSOD's are showing up, as I've had to use recovery points after installed drivers didn't work. The last .dmp on 19 JUL was a Intel Graphics driver install attempt that I pulled off in safe mode before recovering back to the pre-driver point.
System: ASUS P8Z68-V Pro/GEN 3 Intel 2600K XFX R7950 Black Edition OCZ 850W Crucial 128 GB SSD Seagate Barracuda 1 TB HD Corsair H100 Windows 7 64 bit (full)
I just installed my ATI Radeon X1950 XT sapphire graphics card to my computer. I inserted it into the slot and plugged it in. Now when I turn on my computer the monitor keeps getting the Check Signal Cable error. I have it plugged in properly and everything not sure what is going on.
I'm having problems with my the graphics card on my laptop. It's an APU and I have picture and videos problems. Whenever I watch movies or look at pictures I see most things fuzzy, (if that makes any sense). I tried to watch a DVD and the video quality was unbearable. The most unbelievable thing is it affects picture quality. I can't do anything without poor quality pictures or videos. I have tried installing new drivers and all sorts of things. Is it me or is it my laptop?
My Laptop Specs:
AMD A6 Quad Core APU 1.5Ghz AMD Radeon HD 6520G 6GB DDR3 Memory 1066Mhz Windows 7 Home Premium 64bit
I have a dell inspiron 6000 and I got mobile intel 915GM/GMS,910GML express chipset family for my graphics card driver. I want to play the Dimension U game, so I have to update my graphics card driver. But I can't
have been having a problem since the time i switched over to win 7 64 bit from XP 32 bit..Got the win 7 7264 (64 bit) setup on my comp. tried installing the latest driver downloaded from Nvidia , 190.38 for my GTX 260 (Palit), but for some reason the installation doesnt proceed. have been facing the same problem with Vista and XP (both 64 bit) now..
the installation progress bar reaches around 30% and d monitor restarts and then the bar is still at d same position it earlier was and doesn move. have tried a few other drivers like 182.50 but for some reason none of these drivers gets installed..
the only breakthrough i had was when i installed it in win XP 64 bit when it started popping up the driver signature error..i believe the same issue is happening in Win 7 and Vista too but not sure.
Out of those 3 cards I only use the GTX260 and the 9400GT. I had to 'retire' the Fx5500 because the latest WHQL (certified) drivers only provide support as far down as the "6 series" Nvidia cards. Unfortunately the Fx5500 is a "5 series" and falls below that line. I have already tried to use the GTX260 and Fx5500 in previous versions of Windows (XP and Vista), but there is no way to download and install two separate drivers for two of the same make of video card - you'll get nothing but errors.
There is the option of going to a place like guru3d.com and downloading a custom supported driver that covers both the GTX260 and Fx5500, but the drivers are not certified and lack support. Therefore, I purchased and now use the 9400GT which is covered under the drivers for the GTX260 and eliminates the need for messing around with custom drivers. Also, the 9400GT has a better graphics processor and more memory than the Fx5500, so it was time to upgrade anyway.
I recently upgraded my video card from a 4890 to a 6970. I loaded all the drivers and stuff. Now Aero is off and won't turn back on. When I run the Aero troubleshooter, it results in a "A problem is preventing the troubleshooter from starting" message. The Windows Experience Index is also not working. When I try to run or refresh it, I get a message "Could not measure video playback performance". I tried searching the web, but had no luck.
For over a month now I have been trying to get the mass storage driver to work in Windows 7 x64 OS system. I have upgraded the drivers from the website and that didn’t work. Then I posted the question on your forum and someone had sent me to another driver that still didn’t work.
In Windows 7 x64 it will not install and recognize any driver for the mass storage driver even after installing the driver package that I downloaded from the site. Also, it seems without the mass storage driver working Windows 7 x64 will not recognize my other drives that attached to a PCI IDE card that Windows 7 does recognize and functioning properly.
So I've been trying to install a new graphics card update called "Nvidia update components 1.8.15" which I'm not sure if i really need it but I've been having a lot of problems with games like Call Of Duty: Black Ops lagging and I'm thinking I need this update but when I go to update my card it says it Failed here's a picture and my specs...
Operating system is windows 7 (64-bit) Graphics Card is GEFORCE GT 540M Processor Intel i7 2.00 (turbo boost up to 2.9 quad core) Ram 8 GB
I have a graphics card usr5699b that was working for a short time on win 7 but after 2 days it caused my video cards to mess up possible driver issue or irq conflict. Is there anyway to make the drivers compatible with win 7?
I am running XP and intend to go to Windows 7 shortly. I want to cover all of my bases and get my updated graphic driver before the switch. I went to the manufactuer site and they did not have Windows 7 drivers listed yet. I have seen other posts on here about updating Mirage 3 drivers and was wondering where they got them.
I am looking for working drivers for "All-In-Wonder® 9600 256MB Graphics Card" This is also known as a," All-In-Wonder® 2006 Edition"
It is the AGP type of card.
I am running Windows Ultimate 7 64bit.
I googled it but there seems to be nothing out there that will work 100% for a 64bit version of Windows 7.
I really just want the graphics portion of it to function fully. The tuner would be a bonus. I just emailed Ati/AMD and they responded with this email:
The All in Wonder 2006 is a legacy chipset. There are currently no announced plans for drivers for any of the legacy products to be developed in any operating system including Windows 7.
The legacy All in Wonder cards are supported up to XP SP2. They have no support in any operating system higher than this from AMD Customer Care. In Vista drivers where released for the card and input features. This is not the case for Windows 7, there will be no drivers for the video card or input features of the card in Windows 7.
Currently the Theatre 750 TV tuners are the only tuners with drivers from AMD for Windows 7, Theatre 650/600 tuners should have drivers released in the first quarter of 2010.
PCI Express based Radeon HD2400 series and higher Radeon based cards have drivers and support in Windows 7 from AMD.
In order to update this service request, please respond, leaving the service request reference intact.
I have Sony Laptop VGN-AR 870 Windows 7 x64. Using NVIDIA GeForce 8600M GT. I want to update to the newest version available for my graphics card, which is Version 280.26 but when I go through the setup it says "This graphics dirver could not find compatible graphics hardware". Well what the hell does that mean? I went to NVIDIA's website and downloaded this driver specifically for my 8600M gt card.
