i have a digital monitor that i am now using with my EVGA 260 video card, i have an old analog flat screen monitor that i would like to use, they are not the same size, digital is 19 analog is 17, if i connect my anolog screen to my motherboard on board vga connector, how would i go about setting it up my system to use both monitors,
View 5 RepliesI plan on running multiple monitors with one being a touchscreen.
First off, is this even possible? The thought crossed my mind that if there was a visible cursor, the touchscreen might not "grab" it properly. I need to be able to use the touchscreen as a lauch pad of sorts, with my most common files shorcuts on it, touch, open, back to the old school monitor.
Or does having a touchscreen require ALL monitors to be touchscreen (it might delete the visible cursor.)
Second, can I still use my touchscreen monitor with the cursor (as if it was just a standard monitor?)
Lastly, can I run a touchscreen on an old (4-8mb) video card? I can't imagine needing more than 800x600 16 bit. This will be a smaller monitor and really just used for a launch pad.
Anyway, thanks for the (future) help and I look forward to stopping by (once ASUS decides its time to mail the box!)
i just bought a new video card (EVGA GTX260) yesterday and installed it and played with it with no problem....(one day later)......until now so basically here what happens now. when i boot up it goes through the "starting up" phase and when the window 7 says "Welcome" after that i just get a blue screen, no word no picture just blue!
So i press the reset button and i am only able to go to my desktop menu by safe mode! and if i try to go through "start up computer regular" it would just lead me to the blue plane screen....
The reason why i think it is the driver is because in safe mode i am able to uninstall my nvidia driver. Restart and WOW i am back to my "REGULAR" desktop menu but with no driver. SO as soon as i am on my screen Window 7 wants install the newly detected video card's drivers for me and i do. when i restart BAM! back to the blue screen..
I am running Windows 7 Ultimate Edition on my desktop PC. I installed a fairly old graphics card (dont need anything fancy for software programming). It is a Jaton 117PCI with 32MB memory. Also I have a ATI Radeon HD Pro 2600 Installed. I cahnged my BIOS to boot PCI first instead of PCIe.
Windows will boot up but no display on the ATI Card. I go to device manger and it shows both cards, with no conflicts and working properly.
When i access the displays menu in Windows 7 it will only show my montior on the Jaton card and will not show my ATI card as being active.
Is there anything i can do to get these two cards to work together? (I thought i was really good at computers, but now haha this has thrown me for a loop)
I found this post:
Triple Screen troubles
it was identical to my problem except my setup was different, his method of fixing his problem i dont think is going to work for me.
Also, the ATI card has two DVI ports and a S-Video, i just dont have another monitor with DVI. When i use a DVI to VGA converter the monitor wont come on it will stay in power save mode. I know the ports on the card are working because I can remove the converter and plug it up to my other monitor that has DVI on it and it will power up.
So any help to solve either one of these problems will be greatly appreciated. If there is anymore information you may need please let me know!
i've never tried to hook up dual monitors before so its probably something simple. i installed a new graphics card a while back and haven't used the original for months, and now that im trying to hook up dual monitors it wont even recognize the original in the device manager, or that i have a monitor plugged into it. both monitors work perfectly fine in the newer card slot.
View 4 Replies View RelatedI am trying to setup dual monitors will the graphics card support that function:
Intel(R) G33/G31 Express Chipset Family
I'm running it on my HP Pavilion g6, which has a Intel Core i3 processor@2.3 ghz, 4 gb RAM and both an ATI Radeon HD7670 and an Intel HD 3000 series video card.So the problem is that the aero effects are kinda laggy, for example when using the windows key+tab or when shuffling around the elements in the start menu. I know there is an option to select which video card runs a certain application( Configure switchable graphics), but how can i canfigure it so the windows uses the faster ATI card, rather than the Intel one?
EDIT: I also forgot to add that all the drivers are the newest versions.
what inexpensive video card for dual display?
View 9 Replies View RelatedI just purchased a new video card for my old Acer M3100 that I dual boot the original Vista and Windows 7 on. I bought a new Asus Nvidia GeForce GT 610 video card to play Skyrim. Windows 7 will install the drivers with absolutely no error messages but upon rebooting they won't load and I'm stuck with basic VGA. I booted out and back to Vista and loaded them and they installed fine as well and upon rebooting into Vista they actually load! My Windows 7 install is a recent clean install because I tried upgrading to Windows 8 and didn't do a clean install and it borked itself on all my legacy hardware. Does anyone know why a clean install won't load new video card drivers but my old Vista install loads them fine? (Yet another reason not to abandon the Vista Beast, Vista is the last OS that recognizes my (2) Rio Karma MP3 Players.)I downloaded the latest drivers for Windows 7 Pro 64Bit directly from Nvidias website and installed them and still get a "No GPU detected" message when trying to run the NVidia software that comes with the drivers.
NVidia Driver Version: 306.97
I have dual monitors, one on my laptop and another bigger monitor for when I am docked and at the office.
Under XP I had it set so that when I closed the lid on my laptop, the lapto screen was shut off and all files that were subsequently opend were opened to the main big screen.
It appears now that when I close the lid the screen stays on and if there was a window showing on the laptop when the lid is closed it does not automatically switch to the big monitor. It used to under XP. Is there a way to duplicate this behavior in Windows 7?
There are times when I want to use just one monitor and shut the monitor built-in to the lap top - off. Is there an easy way to do so?
i am trying to run dual monitors on windows 7, i have only got pci slots on my asus mother board?
View 10 Replies View RelatedI just installed a 2nd video card. It's running perfectly fine, except now on my dual monitor setup, there is a virtual space between my monitors. (This space shows on the Windows "screen resolution" tab. Practically, it means that I have to move my mouse a lot more to get it onto the 2nd screen, rather than it just being right there. I can move the screen (on the screen resoltion tab) to be right next to the other screen. I'll press save/apply and then it just pops back to the same place it was with the gap still there. I've tried doing it in the nVidia control panel as well, with the same problem (pops back). By the way, even though I installed the 2nd card, both monitors are plugged into the SAME, OLD (previously working) video card.
View 10 Replies View RelatedI am having a issue setting up 2 monitors. I think maybe I cant run one through my graphic card and my VGA port on my motherboard at the same time.... Right now I am running my monitor through a nvidia 8400 gs but I thought I could run another on my VGA port on the motherboard also.
View 9 Replies View Relatedi recently got a second 20" monitor. (both are samsung, 2 ms. very similar in specs).
and i noticed i can not use both of them in games. IE, the resolution in game wont go past 1680x 1050, which, by my understanding, is how u get it to span onto the second monitor. Any ideas? iv got an nVidia GTX260 running latest drivers. core i7 oced to 3.6.
im trying to set up dual monitors. Right now i have my main monitor as my LCD tv, and i have a vga splitter from my only vga port sending out two vga cables, one to my tv and the other to the monitor my computer came with. im trying to use the monitor it came with as my second monitor where i can do things on both, but its only cloned from my main one. when i go into control panel> appearance and personalization> display > display settings > detect , it will not find my second monitor. So do u need 2 vga ports for this to work? or is there anything i can download that would allow me to use the second monitor as its own and not a clone? this probably sounds really confusing so if i have to reword it i will, just trying to find out if im wasting my time by trying to do this
View 4 Replies View RelatedI have dual monitors that work perfectly at windows startup.After leaving the computer alone for sometime (after powersave has occured on the monitors), I arrive back to the pc to find only one monitor returns from powersave (the same monitor everytime) Rebooting the system corrects the problem; or entering the device manager and selecting "scan for hardware changes" will also correct the problem.I've updated the video card to the most current drivers possible and do not know where to go after that. It's very annoying and have the exact same thing happening with a PC at work with completely different hardware.
View 1 Replies View RelatedI am trying to buy a laptop and it has a amd a6-3400m processor, Those processors are suppose to be able to handle video. my question is does the built in gpu support 2 monitors were you can move a program back and forth between the two monitors or is it mirrored.
View 2 Replies View RelatedWell when i use both monitors it gets all blurry. But when i use one monitor it doesn't. why is this?
View 9 Replies View RelatedI have two graphic cards and Win 7 will only let one work at a time. I have updated the drivers both to windows 7.
View 8 Replies View RelatedI came home from work today and both my monitors were completely black even though computer was up and running. Browsing through my iphone I noticed that dual monitors were a possibility. So I unplugged one and restarted with success.
I then proceeded to update my video drivers (I have a nvidia 6800) but the problem persists.
Any ideas??
i am trying to use two monitors using the hdmi to my tv what i want to do is play a video streem in full screen mode on my tv and surf the web on my laptop screen i can get this to work but the full screen mode on my tv reverts back to a small window if i click the mouse on my laptop screen.
View 6 Replies View RelatedI have dual monitors with DVI and VGA.I have Realtek High Definition Audio and want to set up audio throught both. When the second monitors is connected through the rear black port the speakers of the second monitor when tested through setting but do not work when playing audio through a media player.
View 1 Replies View RelatedI am trying to use my laptop with a tv as a second monitor I want to stream a live video from the internet on my extended monitor via my hdmi cable while I keep working on my laptop the problem I have is that every time I use the mouse on the laptop screen the extended screen (via the hdmi) reverts back to a small screen from full screen. How can I keep the second monitor in full screen mode while work on my laptop
View 5 Replies View RelatedI've recently switched from Windows Vista to Windows 7 x64. I use the word switched instead of upgraded because I formatted my old drive instead of installing over Vista.I have been using two screens for forever now, both LG Flatron L1750HQ, both are digital and have served me well. My graphics card is an NVIDIA GeForce 8800 GTS, which has two digital outputs. I have the latest NVIDIA drivers, and I have the drivers for my screens (though they are old, June 2007, and I can't find any newer ones... which might imply an EDID problem? Dunno). I have also run every Windows 7 update known to man.To describe the problem: only one of them ever works at a time (which implies the screens themselves are okay), and both outputs work as well. To top that, Win 7 does recognize I have a dual display, but one is always in digital power-saving mode (no signal, I guess).When my computer boots up, the left screen shows the boot process, while the right one has no signal. When Win 7 boots, its the other way around.
In the NVIDIA -and- the Win 7 control panels both screens are visible, shown side by side, and set up properly with and without the screens' driver, but that does nothing to solve the problem.I've also examined my BIOS, but I doubt its anything to do with that since I haven't touched my BIOS in ages and it worked just fine on Vista. I'd wager that if I go ahead and install Kubuntu on this machine, I'll get my dual screens back, but I don't want Kubuntu.
I have two 4:3 monitors side by side. Both of them are set to 1280x1024. My desktop is extended across both.I downloaded a 2560x1024 image and set it as my background. Iwent into personalization/etc. and set it to 'Tile' as Google results repeatedly said I should.No matter what I do, tiling just makes four images appear, two on each screen.
View 2 Replies View RelatedRecently I've been having issues with my laptop and dual monitors. I have been plugging my laptop into the DVI port of external monitors. After a few days, my external monitor would lose signal if I selected to show the desktop only on monitor 2, but now, whenever I plug in my second monitor, both my laptop monitor and the external monitor go black. I've had this happen with two monitors now, and I can't think of what could cause this. Can repeatedly plugging in a monitor break it?
View 1 Replies View RelatedI have a dual monitor setup. In XP the photo screensaver would display pictures on both monitors, alternating between them.
On Windows 7, most of the image is on my left monitor (which is my secondary, extended display). Some of the image shows on the main (larger) monitor.
I would like the images to show on the big main monitor.
Anybody have any ideas?
I have 2 Samsung SyncMaster 2243 monitors running off of a ATI Radeon 4670 graphics card.
I have downloaded some wallpapers that are wide enough to cover both monitors (large panoramas atc). But it just displays whatever will fit on my main monitor and duplicates it on the secondary monitor (This is only the case with my wallpapers, not the rest of the desktop: shortcuts, start menu etc.). I'm sure this is just a user error on my part.
edit: If I choose the "tile" option. It will ALMOST do what I want. The picture will extend across both monitors, but if it is not quite long enough/tall enough it will start the tiling.
I have to have dual monitors and 7 works great with them. One of the cool featurs of 7 is to be able to put up two reading panes side by side. If you have not seen this it is done by opeing say 2 Word docs. Pull one left and one to the right. They will each fill 1/2 the screen side by side. When I do it with dual monitors - let's just say it does not give the expected results.
View 3 Replies View RelatedOk, so I just added Windows 7 to my lineup. After an epic battle with permission problems between XP and 7, I finally managed to fix it and have moved on to a slightly more odd yet annoying problem- my dual monitors.
The way I used to have my monitors set up was my monitor on the right had my task bar and icons... but the monitor on my left was the main monitor. That way when a program opened it would open on my left monitor (which is right in front of me) while still allowing me complete access to everything under my taskbar and all my icons to my right.
Is there any way to do that in Windows 7? When I select "Make this my main display" it moves the task bar over to that monitor, which is annoying. Any suggestions?
Note: for those of you curious on how to do this in XP or Vista- pick the monitor you want to be your main monitor (the one programs open on) and pick the one you want to have your taskbar. Let's use my setup- main monitor on the left/Task bar and stuffs on the right).
- Go to display, right click on the right monitor and uncheck "attached". This will turn it off. Now all you have is the left monitor with taskbar and stuff all over it.
- Right click the right monitor again. Check "attached" AND "Primary". Click apply. Right monitor turns back on. Everything refreshes and task bar is on the right monitor.
- Right click left monitor and click "Primary". Task bar + icons are still on the right monitor, but now all programs open on the left one.
Just wondering if anyone knows if 7 will support dual clone monitors with different resolutions. This would make me happy.
View 3 Replies View Related