Whenever I'm checking for any updates (vaio care or ATI) a pop up window appears "Internet explorer has stopped working". And error reporting fails. The process linked with it is werFault.exe. I don't know what to do.
View 1 RepliesI just got a used laptop, popped in a new hard drive, and installed a legit version of Windows 7 Ultimate from scratch. Everything went smoothly, it picked up on all my devices & installed drivers correctly. The only problem is - I can't update Windows. When I go to start--> all programs--> windows update, it goes to "checking for updates" and does that - forever and ever - even if I leave it go overnight.
View 1 Replies View RelatedI have installed a legit Windows 7 OS on my laptop. Its not an upgrade, it was a blank hard drive. WIndows 7 installed flawlessly, picked up all my drivers. The only problem is I am having problems with Windows 7 updates. When I choose Windows 7 update, it says "Checking for updates" and stays like that - forever. Even the next day. I did heavy heavy research, found out others are having the same problem. I tried all the fixes I could find, which are listed below:
1. No Anti-virus programs installed yet - brand new Windows 7 ultimate installation
2. There is no spyware - its a brand new clean install
3. Firewall shut off
4. Temp files, cookies, history cleared
5. background intelligent transfer service set to automatic in services.msc
6. software distribution folder renamed
7. tried shutting off automatic updates and doing it manually
8. Added windowsupdate to trust zone
9. ran MicrosoftFixit50202 in normal and advanced mode
Even with my internet SHUT OFF (turned off modem) it still checks for updates and doesn't fail with "No internet connection available".
I have windows 7 64 bit sp1, and when i check for updates it checks for updates with no results. I have let it run overnight and still nothing. It says checking for updates with the green line going back and forth, but never gets any results. Can someone help me with this it is very frustrating.
View 9 Replies View Relatedmy laptop is just at a black screen after the dell screen.
I clicked the error checking for the "C Drive" and "At Startup" and when i restarted it just went to a black screen after the dell screen.
I have restarted several times trying to get Windows 7 to startup with no avail. What should i do?
Its a dell latitude laptop with like 2gb of ram intel core 2 duo proc (not sure on speed)
I changed my os to win 7 64 bit, I'm trying to install Microsoft 2010 office 64bit from an online link. it downloaded and goes to unpack when I get an error while it's checking crc. It stops and the error says insufficient disk space or errors on disk. I have 80gb free on my drive. and I cleaned the disk from previous installs.
View 2 Replies View RelatedFor the past day windows wants to install the same 4 updates over and over, I have windows update set to download and let me choose when to install.
I can't understand why I even need them, as I uninstalled net framework. Notice how the update at 8:17 AM., KB2656368, is the same as one of the 4 updates installed at 7:47 PM. Windows wants to install the same four kb files again.How do I stop this?
Security Update for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008, Server 2008 R2 for x64 (KB2656368)
Installation date: 6/15/2012 7:47 PM
Installation status: Successful
[Code].....
I just installed windows 7.I downloaded the latest intel driver for my lan on my computer so I can access the internet. I am able to go go google but can not connect to any microsoft sites. I am getting the error 80072ee2 whenever I try to run windows update.
View 9 Replies View RelatedUpdate readiness tool - finds missing files. ================================= Checking System Update Readiness. Binary V - Pastebin.coThis pastebin was after I was able to find most of the files, except for the few listed as missing now. ================================= Checking System Update Readiness. Binary V
View 2 Replies View RelatedI work on a place that repairs computers, I have one pc laptop dell, which I made the dell recovery, immediately after that, I try to do the updates and said to reboot as the service was disabled but it isn't. I try to do by our hard disks we run a program that have all updates for 7, it starts installing sp1 and says catastrophic error. The defender is down. I read something about windows defender.
View 1 Replies View RelatedAfter downloading the update I got this message when it started to install: [code] The Extended attributes are inconsistant.Am I going to have to reformat my hard drive?!
View 5 Replies View Relatedafter successfully installing windows 7 (my first windows install since XP, after which I moved to Ubuntu) and doing the initial set-up etc., installing my own anti virus software and MS Office etc, I thought it was time to let it update itself.
however, every time I tell it to update then shut down it fails. I tried to troubleshoot it using the MS help box which was very little actual help, and then tried to initiate the update manually, however, when it comes to installing some windows 7 security and system updates and some IE updates, installation fails, resulting in error code 800736B3, whatever that means. The updates it fails on are:
security update for INternet explorer 8 for windows 7 (KB974455)
security update for windows 7 (KB974571)
security update for windows 7 (KB975467)
update for internet explorer 8 compatability view list for windows 7 (KB975364)
update for internet explorer 8 for windows 7 (KB976749)
update for windows 7 (KB974431) I'm currently running avast! (v4.8 home edition) following Windows 7 informing me that it would not allow AVG to run (it was from an 'untrusted source' apparently, despite having been working a few days previously), but thats another problem entirely
Any help than can be offered will be much obliged! All I've been able to turn up from googling is a command that un-registers windows, which then for some reason allows the updates to occur, following which I can use my original activation code (given to me by digital river with the student upgrade deal) to re-activate windows, although I am reluctant to try this!
My Windows Updates fails Error Code :WindowsUpdate_80070652
Definition Update for Windows Defender - KB915597 (Definition 1.71.471.0)
Any thoughts ??
I installed windows 7 ultimate 64 bits, I do all updates including sp1, and it appears one last update that is IE 9 but on optional. It seems that it install, when I restart pc windows is installing ok, but when it restarts it started installing and reverting changes with error. I already downloded the file and its is the same. I do reset updates and is the same.
View 4 Replies View RelatedWhen I try to check for updates I get an error code saying that I need to install new windows update software but after trying to install it I get an error windows could not check for updates and get an error with the title as an error(error 800703F1).
(might be related) Some days ago windows tried to install some updates but failed several times. Every time I restarted the PC it said the updates failed to install and then I had to re-download them.
So I can't use windows update to search for new updates at the moment.
I have windows 7 pro with SP1.I'm having a problem with three updates.
KB2633171
KB2676562
KB2679255
I have installed them numerous times.I check the update history and it says they were successful. (If that's the case why are you wanting to install again? ) Now when I try to "check for updates" I get the error 80073712.I have tried Microsoft fixit numerous times. I have tried the hotfix KB947821(also numerous times) to no avail.
As I open windows update, and check for updates, after a while it gives me an error:
"Windows could not search for new updates. An error occured while checking for updates for your computer. Error(s) found: Code 80073712."
I have also tried Windows Readiness Tool, it doesn't fix my computer, I still can't check for updates successfully.
System Info Utility version 1.0.0.2
OS Version:
Processor:
Processor Count:
RAM:
Graphics Card:
Hard Drives:
Motherboard:
Antivirus: None
I cannot install important updates not sure about much about my laptop apart from its a toshiba satellite pro on windows 7 an when i tryed to install them this code came up code: 80240016.
The Window Updates fail with error 80070308.
System:
Win7 x64 + SP1
Updates that failed:
KB2570791
KB2536276-v2
KB2539635
KB2572077
KB2518869
KB2586448
KB2556532
KB2560656
KB2552343
Things that I've tried but failed: (also good for others to try these first)
1) Reset and re-register Windows update (link)
2) Clean boot
3) Download and manually install the updates one at a time (Fail with no error code)
4) System Update Readiness tool
5) Use .NET setup verification tool (.NET ok) (link)
6) Elevated cmd -> sfc /scan now (verfication ok)
I just installed some of the latest Windows updates for my Windows 7 SP1. However, the following balloon notification pops up in the tray upon reboot.
View 4 Replies View RelatedI've had windows 7 for some time now & Windows Automatic Updates have always worked fine. Now I'm receiving a message "Automatic Windows Update failed: Socket 10053 Software caused Connection Abort" from my online-armor firewall. I've not installed any new software recently, nor have I any email or internet connection problems. Also, performing windows updates manually works ok.
View 2 Replies View RelatedI'm unable to do any windows updates due to error code 800B0100. I think a recent virus I had may have tampered with update files. I tried running the System Update Readiness Tool as suggested in Help and Support however the update installation on that failed too. Due to other problems I've been having recently I'm considering re-installing my OS at this point.
View 1 Replies View RelatedI am getting BSOD everytime I boot up the computer. It will say configuring windows then crash to BSOD and say dumping physical memory. Code error is 0x000000d1. It says that Ndis.sys is involved. Top of the BSOD it says Driver_IRQL_NOT_LESS_OR_EQUAL or something. it just continues this cycle of trying to boot up followed by crashing.
I can boot up in safe mode, but not safe mode with networking. So I'm not sure how to download the latest drivers without an internet connection.
I am running Windows 7 service pack 1 on a Dell inspiron 546. I have tried booting in safe mode and running msconfig to only boot up microsoft programs, and i've disabled Mcafee security and firewall.
For the past 2-3 months I've been receiving the same error in Windows Update every time I try and update: Error 80246008. I've tried the Microsoft Fix It application and the same problem occurs. I took a look into the services and when I try to start one service required by Windows Update it always fails because its core services are not launched, so I tried to launch those and those won't even launch.
[URL]
I just installed some of the latest Windows updates for my Windows 7 SP1. However, the following balloon notification pops up in the tray upon reboot:
View 4 Replies View Relatededit (Ian): This thread has been split from an audio drivers topic, as it may be of use to others having C004F012 errors.
When I went to install the x64 drivers, I got a message saying that my Operating System was not compatible, but then it asked me if I wanted to run it under the correct settings, which I did and then it installed. As for the Windows Updates, I tryed to run them and I get "Windows could not search for new updates" and error code C004F012.
I have had problems with failed Windows Updates for the past 3 months or so. I tried the windows update troubleshooter and it did not work. I tried to perform a clean boot and install the updates, it also did not work. I was able to successfully install a few updates to the .NET Framework by completely uninstalling it and then re-installing it (and double checking that it installed properly). At the moment I have 17 updates that fail to install and they pretty much all deal with microsoft office 2010. The only two not related to microsoft office are:
Update for Windows 7 (KB2545698)
Update for Windows 7 (KB2547666)
I don't know what else to do. I currently have Windows 7 Professional x64. I bought the computer in March of this year and have not made any major changes. The only updates I have are from Windows Updates and the last time they successfully installed (besides the .NET Framework I just fixed) was 21/10/11 and it was a hotfix for windows (KB2482122) problems really started around 19/07/2011 (more than a few updates failed).
I keep getting this error, and following Error message when you try to install a Windows update, a hotfix, or a service pack after you perform System Restore in Windows Vista: "0x80071A91" and removing files manually did not resolve the problem[CODE]
View 5 Replies View RelatedI was trying to install the automatic win7 updates and in the 'important' update was ie9. I clicked on 'install updates' and windows started installing ie9. After a couple of seconds I got this window saying:: "Some files that need to be updated are currently being used by these programs. Please save your work, close the programs and then continue. If you can't close, setup can do it for you."
HP advisor
HpqToaster Module
Java UpdateScheduler
Microsoft Security Client User Interface
nokia launch application
quick launch buttons
windows desktop gadgets
windows explorer"
That's the list of programs that need to be closed. Obvious, I cancelled. Why do I need to close almost everything for installing a browser?
(1) I installed a new 1TB Seagate Baraccuda 7200.12 Installation seems fine.SeaTools (ver 1.2.0.2 and ver 1.2.04) won't detect the internal drive but detects external usb drives ok.
(2) My two Seagate 500GB, 1TB externals record disk temps over 45�C & climbing after a couple of hours running idle with an ambient temp of 22�C. This seems way too high - what do you think? I have a couple of days left to return the 1TB.
Every time I start my computer I get this message;Checking file system on C: The type of the file system is NTFS. One of your disk needs to be checked for consistency. You can cancel the disk check, but it is strongly recommended that you continue. To skip disk checking, press any key within(10)seconds.I have allowed it to continue numerous times, but it makes no difference, this same error comes up every time I start my computer, now I just press a key within 10 seconds and that gets rid of it.
View 10 Replies View Related