I keep getting this error, and following Error message when you try to install a Windows update, a hotfix, or a service pack after you perform System Restore in Windows Vista: "0x80071A91" and removing files manually did not resolve the problem[CODE]
View 5 RepliesSystem Info Utility version 1.0.0.2
OS Version:
Processor:
Processor Count:
RAM:
Graphics Card:
Hard Drives:
Motherboard:
Antivirus: None
I cannot install important updates not sure about much about my laptop apart from its a toshiba satellite pro on windows 7 an when i tryed to install them this code came up code: 80240016.
The Window Updates fail with error 80070308.
System:
Win7 x64 + SP1
Updates that failed:
KB2570791
KB2536276-v2
KB2539635
KB2572077
KB2518869
KB2586448
KB2556532
KB2560656
KB2552343
Things that I've tried but failed: (also good for others to try these first)
1) Reset and re-register Windows update (link)
2) Clean boot
3) Download and manually install the updates one at a time (Fail with no error code)
4) System Update Readiness tool
5) Use .NET setup verification tool (.NET ok) (link)
6) Elevated cmd -> sfc /scan now (verfication ok)
For the past 2-3 months I've been receiving the same error in Windows Update every time I try and update: Error 80246008. I've tried the Microsoft Fix It application and the same problem occurs. I took a look into the services and when I try to start one service required by Windows Update it always fails because its core services are not launched, so I tried to launch those and those won't even launch.
[URL]
I'm unable to do any windows updates due to error code 800B0100. I think a recent virus I had may have tampered with update files. I tried running the System Update Readiness Tool as suggested in Help and Support however the update installation on that failed too. Due to other problems I've been having recently I'm considering re-installing my OS at this point.
View 1 Replies View Relatedafter successfully installing windows 7 (my first windows install since XP, after which I moved to Ubuntu) and doing the initial set-up etc., installing my own anti virus software and MS Office etc, I thought it was time to let it update itself.
however, every time I tell it to update then shut down it fails. I tried to troubleshoot it using the MS help box which was very little actual help, and then tried to initiate the update manually, however, when it comes to installing some windows 7 security and system updates and some IE updates, installation fails, resulting in error code 800736B3, whatever that means. The updates it fails on are:
security update for INternet explorer 8 for windows 7 (KB974455)
security update for windows 7 (KB974571)
security update for windows 7 (KB975467)
update for internet explorer 8 compatability view list for windows 7 (KB975364)
update for internet explorer 8 for windows 7 (KB976749)
update for windows 7 (KB974431) I'm currently running avast! (v4.8 home edition) following Windows 7 informing me that it would not allow AVG to run (it was from an 'untrusted source' apparently, despite having been working a few days previously), but thats another problem entirely
Any help than can be offered will be much obliged! All I've been able to turn up from googling is a command that un-registers windows, which then for some reason allows the updates to occur, following which I can use my original activation code (given to me by digital river with the student upgrade deal) to re-activate windows, although I am reluctant to try this!
My Windows Updates fails Error Code :WindowsUpdate_80070652
Definition Update for Windows Defender - KB915597 (Definition 1.71.471.0)
Any thoughts ??
For several months I have had problems each day when asked to install "Windows Updates", some days I get 4 or 5 updates or more, for a long time it installed all except one. This has now expanded so I have three updates that will not install for some reason. It creates a restore point then tries and fails each time. I am using Norton Antivirus and have even disabled that, but I still can get the updates to install. I have never had this problem before. I also have a laptop and another PC computer that has done these updates, so why problems with this one? It's driving me crazy.I am enclosing a copy of the error message I get together with the list of failed attempts (only recent ones).
[code]...
I have been trying for the last week to install Windows Updates KB976932 and KB2653956. I have received error codes 80246007 and 800B0100. For error code 800B0100 it was recommended that I install the system update readiness tool. I tried to install but I was unable to. For error code 80246007 it was recommended that I change or restart the Background Intelligent Transfer Service (BITS). I am still unable to to install these two updates.
View 1 Replies View RelatedAfter battling massive BSOD all day yesterday, I did a complete factory reset, and many other things which have stopped the BSOD. Unfortunately my CPU is still completely freezing up at random times.
I figured updating all the windows updates, but i'm unable to. I keep getting error code 800B0100 when I try to DL them. I get the x64 Windows Readiness Tool download. I downloaded that and even that has failed to install. I'm not sure what the issue is.
Running windows 7 Home Premium x64 based PC.
Windows Update reports that Administrator Permissions are needed, However I AM the Administrator and AM logged in as the Administrator.
View 2 Replies View RelatedFor the past 18+ days I've been unable to download and install updates on Windows7 x64. I've tried all the trouble shooters and the update readiness tool, I've sought and received advice from windows answers to no avail, 14 days ago it did allow some updates but now its insists that IE9 on IE is not downloaded when I can see it is and all the time I keep getting Error Codes 80073712 and 9C48 , I've attempted and failed on at least 21 times now and every time it looks like it may make it but then it fails.
View 9 Replies View RelatedI boot up windows 7 one day and my disk drives virtual and physical are missing. I try to use windows update to fix it and it manages to find the driver update and start installing it but it fails to actually install it leaving me with what is shown in the image. Why won't windows finish installing the drivers?
View 8 Replies View RelatedJust finished installing Win 7 64 bit on my Dell Inspiron 1545. It appeared the update was going along smoothly until it came time to reboot. After rebooting, the laptop showed that it was configuring Windows. Once the configuration was completed the system went into Startup Repair. Once completed and checking the Repair Details it shows a message indicating that ci.dll is corrupt. I was able to restore the computer to original state, but once I downloaded the 80 or so win 7 updates, I get the same problem.
View 2 Replies View RelatedI have attempted to update windows 7 with the :Security update for windows 7 for X64 systems (KB2619339) with only failed results.the error code is : 8007065E I have CBS logs WINDOWS resource protection found corrupt files but was unable to fix some of them.
View 2 Replies View RelatedWindows keeps alerting me it was unable to install the updates after I have downloaded them and was told to restart the computer.
View 4 Replies View Related-System -Provider[ Name] Microsoft-Windows-Kernel-Power[ Guid] {331C3B3A-2005-44C2-AC5E-77220C37D6B4} EventID41Version2Level1Task63Opcode0Keywords0x8000000000000002-TimeCreated[ SystemTime] 2013-01-20T05:40:27.336841800Z EventRecordID241661Correlation-Execution[ ProcessID] 4[ ThreadID] 8 ChannelSystemComputerShelby-HP-Security[ UserID] S-1-5-18
-EventDataBugcheckCode278BugcheckParameter10xfffffa8009b434e0BugcheckParameter20xfffff88000e5340cBugcheckParameter30x0BugcheckParameter40x2SleepInProgressfalsePowerButtonTimestamp0
[code]....
and this is the code from the blue screen itself stop 0x00000116 (0xFFFFFA8009B434EO, 0x000000000000000?, 0x0000000000000002) i took a picture of it with my camera but missed that last digit thus the ? below that on the screen was this
atikmpag.sys - address FFFFF88000E5340C base at FFFFF88000E4C000. DateSt?? 4da507aa
im lost i tried searching these codes and some came up with random stuff (some of it worried me like the remote access stuff) and others dont seem to exist at least in a googleable database?
i recently installed windows 7.. when i installed VIA drivers for graphics it didn't get installed properly... i had the message "setup was unable to complete the installation (error code-6) ".. so i was asked to upgrade my BIOS... i downloaded it and installed it... when i ran the update, the system just hanged up and nothing happened for hours,..
so i had to restart the system and went to BIOS settings and clicked load optimized settings,,,.. from then onwards my OS is booting until the windows startup screen appears and just hangs..it's not booting to the users login... but it logs in at times... i dont have any restore points too..what to do?
i have some problem can't install driver usb data link cable laptop toshiba stateleite L745 windows 7 text box : show error code 28 can not install driver .but this cable can in stall in win xp other laptop
View 1 Replies View RelatedI am trying to rectify the error with windows update. Everytime I try to update it tells me it is checking for updates...Then "To check for updates, you must first install an update for Windows Update. Your automatic Updating settings will not change." I click Install now and get "Window could not search for new updates"An error occured while checking for new updates for your computer. Error(s) Found Code 80070643 Windows Update encountered an unknown error.
This problem first came to light a year ago when I downloaded a windows update that was corrupt.It forced the computer to loop the autocheck upon boot and could only be started in safe mode or by canelling the check.After looking through the forums I found an interim fix which disabled the autocheck and since have always recieved the message upon restarting "Autocheck program not found".I naturally thought this issue would be resovled in the next update and or a future fix.I had to go away for work at the start of this year and when I got back and windows updated it still had the autocheck message.Recently I have been unable to update at all due to the aforementioned error. The simplest soultion it would seem would be to do a system restore, this I have tried however every possible point seems to have a corrupt file on it.I ran a scan using Malwarebytes and found nothing.I don't want to format as the programs came pre installed and that would mean taking to back to the shop.
My wifes computer has been acting up for about a week now. IE 8 is not loading properly and is crashing. I am unable to connect to MSE to get updates or to Windows to get updates. I have run Malwarebytes and Emsisoft and neither one can find a bug. Chrome works for a while and the she gets the AW SNAP message.
View 26 Replies View Relatedi had to reinstall my windows 7 64x dell inspiron 1750 laptop using my windws 7 home premium disc that came with my laptop when i bought it because it was in a constant starup repair loop. the disc worked find until i got to the part where it said "expanding windows files." it was stuck at 0% after a whilr and then a message popped up that said error code:0x8007045D. during the time when it was expanding windows files i could hear my disc running, but after a while it stops.when i tried running the disc again, the error code message didn't pop up, but the expanding windows files was stuck at 0% forever. when i tried turning on my computer without using the disc, it goes directly from the "finding window files" screen to startup repair. it tells me that it can't fix the problem and i click on a link that tells me that the problem is that my boot configuration is corrupt. i have also ried cleaning my disc and it doesn't look like there's any stratches on it.
View 8 Replies View Relatedemachines em350 netbook with windows 7 installed. For some reason it got messesd up and he tried to do a system restore. Since then when you try to boot up its saying input a password to unlock the harddrive which we dont know. After you input wrong code 3 times you get option to continue which takes you to black screen saying no bootable device detected press any key to continue. Next i tried to do clean install with windows 7 from a usb this goes fine untill it asks for missing cd/dvd driver i have found away round this which is to select cancel then when back on install now screen swap the usb to another port and continue. This works so i select terms and so on then get to part where it asks where to install windows now i have formated and made a active partition on the hard drive but when i try to click next i get error code 0x8007045d this is where im stuck.
View 9 Replies View Relatedsavvy, and am having troubles installing Windows 7 on my laptop. I purchased the software, downloaded the .iso file from Microsoft's site, then burned the .iso file to a disc. Once on the disc it showed a few different folders and a setup option. I launched the setup option, which brought up the install window for windows 7. I chose clean install because upgrade is not an option for the current version of vista that I have, and while it is copying the files, after about 3% it gives me the error code 0x80070241 and says something about not being able to copy all of the needed files and that some of them may be corrupted. I don't know if this is a problem with my computer or with the disc that I've burned.
View 2 Replies View RelatedWhen I try to install W7SP1, I get an error message after it tries to install after restarting after having downloaded it in Windows Update. It's error code 0x800f0826. IT used to be 0x80071a9, but I fixed that I think.
Note: My laptop does not have a built in disc reader, because of its design, nor did it come with any W7 CD's.
Update readiness tool - finds missing files. ================================= Checking System Update Readiness. Binary V - Pastebin.coThis pastebin was after I was able to find most of the files, except for the few listed as missing now. ================================= Checking System Update Readiness. Binary V
View 2 Replies View RelatedJust inherited a pc, and bought a brand new 1tb hdd yesterday to install windows on. I was foolish at first by not changing any of the bios settings (was a long time since I have done an install) and just left it as it was. I got through to installing windows and it stopped at expanding files with the above error code, which I have heard is really commonWindows cannot install required files. The file may be corrupt or missing. Make sure all files required or installation are available, and restart the installation.Now I am certain there is nothing wrong with the DVD, as it is the same one that has been used on two other PC's. I tried turning it off and restarting, that was when I got another error load up - Bootmgr is missing!After this I restarted it and changed the bios settings to boot from the DVD drive. I tried doing a repair on this through the disc.
Went through all the settings and typed Bootrec.exe/REBUILDBCD in command prompt but that came back fine. I tried clicking startup repair after this but it did not restart, so I just went through the motions and restarted it manually as by this point I was getting frustrated. Upon restart I went through and booted from the DVD, and it went straight through. This time I tried re-installing but deleted all the partitions on the drive which had appeared since trying to install. However the same error message has come up again
I have tried to install this update six times today (07/05/12) after it was flagged as an important update this morning. Looking at my update history it also failed to instal on the 18th October last year but it has not bothered me since and i have not noticed it until now. Of the seven attempts I had the following error codes from earliest to latest : 800B0100, 80246007, 80010108, 8024200D, 8024200D, 8024200D, 8024200D. I have followed advice from MS running KB947821 and FIX IT also disabled my Norton 360 firewalls and auto protect but to no avail. Also I do not have a DVD with Windows 7 as it was not supplied with my PC and I don't want to restore my computer and lose all my installed software.
View 3 Replies View RelatedA while back, after successfully downloading and installing some updates in the Windows Update, it prompted me to restart the computer to finish the update installation process. However, I continued to use the computer for quite some time before restarting it, and then when it tried to configure the updates on the start-up screen, it showed that it was not successful in doing so. In the past, I noticed that this would typically happen when I did not restart the computer immediately (or within a short time) after the updates finished and I got the prompt to restart. I would have to go to Windows Update and do it over again, and then upon immediate restart, it would always work properly. But this time, it did not, and I keep getting the 8000FFFF error message instead.
Also, now, every time I start the computer, it shows that it's "Preparing to configure Windows... Do not shut off computer" (presumably the updates that never got completely and correctly configured) in the start-up screen... gets to 35%..fails... shuts down (screen goes black)... restarts again... tries to configure again, fails again, shuts down and restarts again... tries to configure again, fails again, and finally it apparently gives up and says "reverting changes" and finally goes to the desktop.I've looked at the answers in several threads at the answers.microsoft.com forum that were started by people with similar problems, and also tried several of the Microsoft "FixIt" files on the Microsoft site, but none of them worked. I'm using Windows 7 Home Premium.
I installed windows 7 ultimate 64 bits, I do all updates including sp1, and it appears one last update that is IE 9 but on optional. It seems that it install, when I restart pc windows is installing ok, but when it restarts it started installing and reverting changes with error. I already downloded the file and its is the same. I do reset updates and is the same.
View 4 Replies View RelatedI have Dell Inspiron N5010. I was using windows 7 home basic 32 bit os. I wanted to change it to windows 7 ultimate. So I have inserted windows 7 Installation disk into CD drive. Then I went to through the installation and I chose the Custom as the installation type.When the partition page appeared, I have formatted all the disks including C which contains windows files. Then I got 298 GB unallocated space. Then I split them in to 4 partitions. Then I have selected one partition to install the windows. Then installation started .
Copying windows files succeeded. Expanding Windows files(0%) is still be like that for 20 minutes. Then I got the error message like: "Windows cannot install required files. Error code 0x80070017". And I thought it would be the installation disk problem. But it works fine in other systems. I tried several disks. No use. Also I got another problem. When system boots I tried to enter into BIOS using F2 and F12 which was mentioned in screen. But it did not enter into the BIOS, Instead it goes to the installation.