Clean Install Windows 7 From Vista...error Code 0x80070241?
Sep 9, 2010
savvy, and am having troubles installing Windows 7 on my laptop. I purchased the software, downloaded the .iso file from Microsoft's site, then burned the .iso file to a disc. Once on the disc it showed a few different folders and a setup option. I launched the setup option, which brought up the install window for windows 7. I chose clean install because upgrade is not an option for the current version of vista that I have, and while it is copying the files, after about 3% it gives me the error code 0x80070241 and says something about not being able to copy all of the needed files and that some of them may be corrupted. I don't know if this is a problem with my computer or with the disc that I've burned.
View 2 Replies
ADVERTISEMENT
Jun 26, 2011
I have an error code 0x80070241 while trying to upgrade from xp pro to windows 7?
View 2 Replies
View Related
May 7, 2012
emachines em350 netbook with windows 7 installed. For some reason it got messesd up and he tried to do a system restore. Since then when you try to boot up its saying input a password to unlock the harddrive which we dont know. After you input wrong code 3 times you get option to continue which takes you to black screen saying no bootable device detected press any key to continue. Next i tried to do clean install with windows 7 from a usb this goes fine untill it asks for missing cd/dvd driver i have found away round this which is to select cancel then when back on install now screen swap the usb to another port and continue. This works so i select terms and so on then get to part where it asks where to install windows now i have formated and made a active partition on the hard drive but when i try to click next i get error code 0x8007045d this is where im stuck.
View 9 Replies
View Related
Apr 15, 2012
Just inherited a pc, and bought a brand new 1tb hdd yesterday to install windows on. I was foolish at first by not changing any of the bios settings (was a long time since I have done an install) and just left it as it was. I got through to installing windows and it stopped at expanding files with the above error code, which I have heard is really commonWindows cannot install required files. The file may be corrupt or missing. Make sure all files required or installation are available, and restart the installation.Now I am certain there is nothing wrong with the DVD, as it is the same one that has been used on two other PC's. I tried turning it off and restarting, that was when I got another error load up - Bootmgr is missing!After this I restarted it and changed the bios settings to boot from the DVD drive. I tried doing a repair on this through the disc.
Went through all the settings and typed Bootrec.exe/REBUILDBCD in command prompt but that came back fine. I tried clicking startup repair after this but it did not restart, so I just went through the motions and restarted it manually as by this point I was getting frustrated. Upon restart I went through and booted from the DVD, and it went straight through. This time I tried re-installing but deleted all the partitions on the drive which had appeared since trying to install. However the same error message has come up again
View 1 Replies
View Related
May 11, 2009
I've installed Windows 7 32-Bit RC1 on my desktop without issues using Daemon tools and mounting the ISO and installing to a separate partition, that's all very peachy. The original OS was Vista HP 32-bit.
Can't say the same for my laptop running Vista HP 64-Bit. Using the same method, the installer gets to about 12% and then comes with this error.
Windows cannot copy files required for installation. The files may be corrupt or missing. Make sure all files required for installation are available, and restart the installation. Error code: 0x80070241
I've downloaded more then 10 GB in the past 3 days re-downloading .ISO from both the Microsoft site and Bittorrent sites and seeing if they're corrupted. They're not. I get the same error every single time. Something else is the problem.
I tried installing BOTH the 32-bit and 64-bit inside my Laptop Vista 64 bit OS and I get the same error.
I've also unzipped the .ISO to my drive and tried installing that way. Same deal. Why did my Desktop go so smooth but my laptop is a living hell?
View 5 Replies
View Related
Jun 18, 2012
i have built my computer with new parts and the installation stalls returning the errror code: 0x80070570
View 1 Replies
View Related
Dec 4, 2011
I am currently running an OEM version of windows vista ultimate 32 bit. I just bought an OEM version of windows 7 professional 64 bit. Will I be able to clean install and activate my new w7 even though I already have OEM vista installed on my motherboard?
In short, Can I install OEM over OEM?
View 9 Replies
View Related
Dec 13, 2012
Want to upgrade Vista Home to Windows 7 Premium. The workstation definitely has the horse power for Windows 7.But visiting computer shops, the upgrade options are cleared out or not available and they suggest a new install of Windows 7 Professional, they also say its cheaper than an upgrade $140 vs $250. Windows 8 is not an option at this time.I have very little data or software on the current machine with Vista,but do have Outlook 2010.Will a new install of Windows 7 clean out the hard drive and I'll need to re-install Outlook?
View 9 Replies
View Related
Sep 26, 2010
So I decided to upgrade my desktop and have completely replaced all of the hardware, however that's irrelevant. I currently have Windows Vista Home Basic on the system but was offered a copy of Windows 7 Professional for $30 from my university and wanted to know if I could install a clean copy of Windows 7 Pro on a system that has Windows Vista Home Basic since I know I cannot upgrade.
View 7 Replies
View Related
Jan 11, 2013
I currently have vista 32 and ordered a full version of windows 7 professional sp1 64-bit. The disk that came in the mail says "Reinstallation dvd windows 7 professional sp1 64 bit". Will this Reinstallation DVD allow me to do a clean install of windows 7 64-bit on my computer?
View 1 Replies
View Related
Sep 25, 2012
Compaq Presario SR5010NX
Celeron D processor 360
Vista Home Basic
512 MB RAM
120 GB HDD
Intel graphics media accelerator
DVD/CD w/Lightscribe
This system is so sluggish it either has multiple infections or is just overloaded given its puny 512 MB of RAM, so I can't really use the system specs utility at the moment.Since I'm working on a similar clean install for an ACER notebook which is Win7HP 32-bit, what are the chances that the .iso file I'm burning to DVD can also be used for this much older technology. I have no problem upgrading the RAM to its max, unless it's already at its max?
View 9 Replies
View Related
Jul 26, 2012
After my computer got a virus, I decided to perform a clean install. In the middle of installing, it says, "The file does not exist. Makes sure all files required for
installation are available , and restart Error code:0x80070002".
View 9 Replies
View Related
Feb 23, 2009
This appears to be a somewhat common install error and it happened to me.
Searched and discovered multiple _possible_ hardware and software causes and multiple _possible_ resolution schemes.
The only consistent solution regardless of all other factors was a boot from the Windows 7 install media; DVD, USB, etc....
Necessitates a temporary BIOS change to make the Windows 7 media the 1st boot media.
Me: Dell Optiplex/P4 3Ghz/2GBmem, XP Pro sp3, Windows 7 to be installed on a clean fresh dedicated 75GB drive.
Failure History: multiple downloads, multiple DVD burns at various speeds on multiple drives and multiple media mfrs, copied to new drive, ISO busted to new drive - Install always started in Windows environment and always failed with Error 0x80070241.
Success: Reset BIOS to boot from DVD, seamless install from DVD, 1st time.
Observation: On some hardware/software configs, in some obscure corner of Windows there sometimes exists a process/dll/driver/etc.... that creates a conflict with the Windows 7 installer; run the installer in a 'non-windows' boot and no conflict.
View 2 Replies
View Related
Dec 5, 2009
i recently bought acer 7736g with windows 7 in it
as the laptops were installed up and until recently with vista, i want to know if my machine was first installed with vista and upgraded to 7 or had a clean install.
any thoughts ?
View 4 Replies
View Related
Oct 2, 2011
what I have: Vista 32 bit system - 2 hard drives
what I want: Win 7 64 bit system - 2 hard drives
what I want to do: a clean install of Win 7 64 bit on the primary hard drive
the second hard drive is free to be used as a backup location during the clean install process
question: how do I backup all critical data to the secondary hard drive before doing a clean install on the primary drive? and then how do I reinstall the data from the secondary drive back to the primary hard drive with the new Win 7 64 bit system on it?
View 1 Replies
View Related
Nov 6, 2009
I have windows Vista business with SP1 installed on a Dell Latitude laptop D830. I have run Windows upgrade advisor , it is giving me clear signal to upgrade to windows 7 professional or ultimate. Now with so much news about upgrade problems occurring. Should I upgrade or do clean install? Also I want to know , if there is a difference between windows 7 upgrade and windows 7 full version? With windows 7 full version, Can I get the upgrade option also?
View 4 Replies
View Related
Jan 14, 2009
I have tried installing Windows 7 in Virtual PC and on my HP 2133 netbook. Both halt when in the copy file stage with this error message:
Windows cannot copy files required for installation. The files may be corrupt or missing. Make sure all files required for installation are available, and restart the installation. Error code: 0x80070241 I have downloaded the iso's again (from the Microsoft partner site) in case there was a corrupt download, but I get the same error.
The VPC image was using the ISO directly, and I copied the files from the iso to a usb drive for the netbook install. Anyone else see this?
View 9 Replies
View Related
Sep 21, 2009
I did a clean install of Windows 7 Ultimate onto my Vista Ultimate Boot Camp Partition (on my MacBook Pro), rather than an upgrade install.
Windows 7 told me that it would move Vista to a folder called Windows.old or something like that.
Fine. After everything was installed, I used Disk Cleanup to delete that folder, and the space was recovered on my partition
But when booting into Windows 7, I get a boot menu that seems to indicate Vista is still there.
So my question is, can I simply delete Entry 2? Or is there other remaining stuff from Vista still on my drive somewhere that I should also delete? What is the drive "Active Boot Partition"?
I wish Windows 7 gave an option to do a clean install WITHOUT keeping the old system around...The whole point of doing the clean install was to get rid of all the accumulated junk and start fresh.
View 2 Replies
View Related
Oct 22, 2009
I have Vista Home Premium 64 bit and I'm trying to upgrade to 7. I bought the college copy so I only have the download, no DVD.
When I get to like 10% of installation I get error 0x80070241, and it says that a file is corrupted or missing and installation cannot continue.
I know everyone hates n00bs who ask questions that have already been answered, and I did google this first (and call Microsoft), but the results I found on google went right over my head and Microsoft was not helpful at all (I shot them off an e-mail thinking I might get better service that way, but they haven't responded yet.)
Anyway, what can I do? I really really want Vista off my computer but it like refuses to die lol.
View 7 Replies
View Related
Aug 12, 2012
Everytime I go do a fresh install of windows it gives me this error 0x80070241 and says some of the files may be corrupt.
View 1 Replies
View Related
Aug 20, 2010
I am having some troubles trying to install win 7 home premium. I just finished building this computer with a brand new western digital hard drive 2TB (SATA).Everything on this machine is brand new. When I get to the point to where it asks me "where do you want to install windows?" screen I get this error 0x80300024 or it will just sit there and the little loading icon just hangs there. What is e problem.
View 4 Replies
View Related
Aug 7, 2012
i tried to do a clean install acording to your suggestion , but this error kept coming up windows error 0x80070057... I'm using asus P6T mobo (no on board gfx option) nvidia gtx285 gfx, 2mb ram, and that's all... The hdd is newly formated..
View 7 Replies
View Related
Aug 3, 2012
I have a Samsung series 9 (NP9004XC) and I am upgrading the 128gb SSD that came with the computer to a Crucial M4 256GB mSATA. I am doing a clean install from a bootable USB that I created from the recovery disc that was included with the computer.I can load up setup but once I get to the part where I choose what disk I want to install it to I get an error. There is only one disk listed (Disk 0, Partition 1) and when I try to select that disk to install Windows to I get the error:"Windows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the computer's BIOS menu."
View 7 Replies
View Related
Jun 1, 2011
After saving money for quite while, i was able to finally buy a new pc, i had assembled other pc`s for my friends and never had any trouble installing windows on their systems, but now, every time i try to install windows 7 x64, the computer hangs while extracting windows files, then, after some time it prompts me with the error 0x80070002, saying that it didn`t find the required files, so i tried with many suggestions:- Updated to the latest BIOS.- Switched the RAM modules from A2 and B2 to A1 and B1 (my cpu fan was in the way so i had to buy another, and yup, i`m living on cup noodles).
- Ran memtest x86+ for 8 hours (no errors)- Ran sea tools but it didnīt detect any drives (still donīt know why, and the windows 7 installer detects the hdd just fine, also tried it on another computer and works fine)- Switched sata cables, switched sata connectors.- Switched from ahci to ide on the Bios, but it didnīt detect any drives after that, so i returned to ahci.- Disassembled all the pc and re-assembled it, re-checked every connection with every install guide 3 times- Tryied to install again, several times, with the same problem, never getting beyond the 48% extraction, mostly 12%, 9% and so on.And right now, iīm poor, un-able to work, and dangerously nearing towards un-employement (sold my previous computer to buy this one, my savings are gone, and canīt afford to get sick, a little problem called "living in Mexico"
View 16 Replies
View Related
Oct 3, 2012
i just upgrade my windows 7 ultimate to windows 8 9200 then i guess i delete some files and now im having problem with this 0x80070002 error.
View 1 Replies
View Related
Jun 16, 2012
i have some problem can't install driver usb data link cable laptop toshiba stateleite L745 windows 7 text box : show error code 28 can not install driver .but this cable can in stall in win xp other laptop
View 1 Replies
View Related
Apr 29, 2012
I'm weeks of spasmodic attempts into replacing my old C-drive with a new SSD and a clean install of Windows 7, 32 bit. Here's the current loop: Following Sandisk's instructions on formatting SSD for use as OS with Win 7:
1) I verify BIOS - SATA is (as before) set to ACHI
2) I place Windows 7 upgrade disc in drive, hoping to use "Option 1 - normal clean install" (from Clean Install with a Upgrade Windows 7 Version )
3) I get "Windows Error Recovery" screen, stating "windows did not shut down normally" (white text on black screen), with two options - start normally, or startup repair.
- if I select "start normally," it merely returns (after a minute or two) to the same Error Recovery screen after some POSTs (nothing other than single-beep) - no request for my input, no "press any key," etc.
- if I select default ("startup repair") option load: "Windows cannot repair this computer automatically" ultimately results after a lot of attempting to repair, etc.
PC will still run Ok from old HD when connected, and shows the SSD in Disk Management with a "System Reserved" 100 MB (F) partition along with a 112GB (E) partition. I keep thinking I need to wipe those and try again, but not sure how or if that's even worth trying. I did have the same SSD up and running Win 7 for a brief time - didn't start at some point afterwards...
View 9 Replies
View Related
Dec 17, 2011
What do I do now? I decided to replace my existing hard drive as I thought it was damaged due to viruses. I installed a new hard and then used my Windows 7 Ultimate DVD to install. I got as far as the above. If this question has been answered somewhere else on this site
View 3 Replies
View Related
Jan 24, 2012
i had to reinstall my windows 7 64x dell inspiron 1750 laptop using my windws 7 home premium disc that came with my laptop when i bought it because it was in a constant starup repair loop. the disc worked find until i got to the part where it said "expanding windows files." it was stuck at 0% after a whilr and then a message popped up that said error code:0x8007045D. during the time when it was expanding windows files i could hear my disc running, but after a while it stops.when i tried running the disc again, the error code message didn't pop up, but the expanding windows files was stuck at 0% forever. when i tried turning on my computer without using the disc, it goes directly from the "finding window files" screen to startup repair. it tells me that it can't fix the problem and i click on a link that tells me that the problem is that my boot configuration is corrupt. i have also ried cleaning my disc and it doesn't look like there's any stratches on it.
View 8 Replies
View Related
May 17, 2011
When I try to install W7SP1, I get an error message after it tries to install after restarting after having downloaded it in Windows Update. It's error code 0x800f0826. IT used to be 0x80071a9, but I fixed that I think.
Note: My laptop does not have a built in disc reader, because of its design, nor did it come with any W7 CD's.
View 5 Replies
View Related
Jan 12, 2013
I keep getting this error, and following Error message when you try to install a Windows update, a hotfix, or a service pack after you perform System Restore in Windows Vista: "0x80071A91" and removing files manually did not resolve the problem[CODE]
View 5 Replies
View Related
