Error Recovery Screen Appears During Windows 7 Clean Install To SSD

Apr 29, 2012

I'm weeks of spasmodic attempts into replacing my old C-drive with a new SSD and a clean install of Windows 7, 32 bit. Here's the current loop: Following Sandisk's instructions on formatting SSD for use as OS with Win 7:

1) I verify BIOS - SATA is (as before) set to ACHI
2) I place Windows 7 upgrade disc in drive, hoping to use "Option 1 - normal clean install" (from Clean Install with a Upgrade Windows 7 Version )
3) I get "Windows Error Recovery" screen, stating "windows did not shut down normally" (white text on black screen), with two options - start normally, or startup repair.

- if I select "start normally," it merely returns (after a minute or two) to the same Error Recovery screen after some POSTs (nothing other than single-beep) - no request for my input, no "press any key," etc.
- if I select default ("startup repair") option load: "Windows cannot repair this computer automatically" ultimately results after a lot of attempting to repair, etc.

PC will still run Ok from old HD when connected, and shows the SSD in Disk Management with a "System Reserved" 100 MB (F) partition along with a 112GB (E) partition. I keep thinking I need to wipe those and try again, but not sure how or if that's even worth trying. I did have the same SSD up and running Win 7 for a brief time - didn't start at some point afterwards...

View 9 Replies


ADVERTISEMENT

Windows 7 OEM Install - Stuck At Starting Screen When Logo Appears

Mar 6, 2011

I recently built a computer, and tried to install Windows 7 OEM on it, but it gets stuck at the screen where it says starting windows and the logo appears. The logo gets smaller and larger. I've been told it might be something with the RAM, but tested it out and that's not the problem.

View 2 Replies View Related

Windows 7 Clean Install On Sony Vaio Laptop W/o Recovery Discs

Nov 3, 2012

So I made a mistake while taking on a friend's problematic sony vaio laptop. They were wanting to install a newly purchased Kaspersky av, but after uninstalling the old version of Kaspersky there was a problem with an unresponsive usb mouse & mouse pad. I wasn't able to resolve the issue through various repair programs and manually reinstalling the driver, which was giving off the error code of not being properly installed or functioning. With owners consent, I decided to let Vaio Care to bring the computer back to factory condition. (I wish the owner had the owners manual to this thing.)I made sure to backup all of the files that the owner needed saved, but failed to make any sort of backup recovery disk for the computer. Not sure if it's too late to do so, but the computer will not boot to windows any longer. I get a white blinking cursor on a black background immediately after Vaio disappears from the screen upon bootup, but cannot do anything with it. I made a windows 7 home premium iso dvd, and when booting from it I reinstalled windows onto one of the 3 partitions on the hd (the largest of the 3 which was labeled "Primary" type). Of the other two partitions, one was labeled "Primary" and was named "System Reserved" but only 101MB, and the other was labeled "System" and was named "Recovery" and is 7.7GB. When installing, the computer does a restart but then boots up from the disk again starting the entire process over again. So I changed it to boot from the HDD, but still get the same problem of a blank cursor and windows not booting up.When attempting the System Recovery Options on the Windows 7 dvd I'm given 3 different partitions (2 of which are 400+GB, labled windows 7 operating system, and located on (D: ) Local Disk). I'm guessing this might stand for the old windows 7 from the factory, and the one I installed. The other partition is 7.7GB and labeled Start VAIO Recovery Center located on (Unknown) Recovery.System Restore, System Image Recovery, and windows Memory Diagnostic aren't doing any good. Startup Repair only gives me an issue for one of the 3 Partitions, the (Recovery Partition), and states that Startup Repair cannot repair this computer automatically, saying that the "Problem Event Name: StartupRepairOffline".

When going through command prompt I see that old data & drivers are still on the disc, but was wondering if it was too late to make some sort of a recovery disc for it? My concerns are that when I do a wipe of the drive and a clean install of Windows 7, I'm going to have many issues without having sony's factoryware installed. Am I able to make my own disk to reinstall Sony's factoryware? What's the best way of getting this computer back to fully functioning?I have access to the drivers on Sony's support site: Sony eSupport - VGN-FW510F - Support

View 6 Replies View Related

How To Run F9 Recovery After Clean Install

Nov 5, 2011

I have Asus EeePC 1215B. Today I was installed Windows 7 from usb flash. I mean clean install. But now I cant run F9 recovery. When I am pressing F9 during boot it show Windows boot manager but system recovery from Asus not work .
I dont delete hidden recovery partrition from HDD. Is here possible way, to run Asus recovery?

View 9 Replies View Related

Blue Screens Appears , If I Install Graphic Driver To My Led Screen?

Nov 14, 2012

if i install graphic driver my led screen will get cracked and blue screens appears

View 3 Replies View Related

Getting Windows Clean Install Error

Aug 12, 2012

Everytime I go do a fresh install of windows it gives me this error 0x80070241 and says some of the files may be corrupt.

View 1 Replies View Related

Blank Screen After Clean Install Of Windows 7?

Mar 28, 2011

I'm trying to install Windows 7 on my PC again, and came to a blank screen after the reboot. I have the PC hooked up to a TV using the S-Video output on my graphics card, and suspect that win 7 is using the DVI port instead. There is no way at the moment that I can use the DVI port because I don't have a monitor that supports it.

is there a way around this so I can use the S-video output for the rest of the installation?

View 3 Replies View Related

Windows 7 Clean Install Blank Screen?

Feb 23, 2012

I'm trying to install Windows 7 on a new SSD, my old hard drive crashed. My video card is an onboard ATI Radeon HD 4250. Initial setup works fine, but when the computer reboots it comes back up blank. I'm already running two monitors, one VGA and one DVI, and safe mode doesn't work either, I've tried booting from a flash drive and a dvd with exactly the same results.

View 9 Replies View Related

Clean Install Of Windows 7 Getting A Black Screen

Feb 2, 2012

I just did my first build and I am having a big problem with installing windows 7 on it. When I boot it's starts loading and then I get a black screen. I didn't get any options before or any command.

[code]...

View 3 Replies View Related

Windows 7 Error Recovery Screen?

Sep 17, 2012

I have been experiencing a problem that has occurred out of nowhere on my HP TouchSmart Tx2-1377nr laptop. I'll go step by step on what happens when I turn it on:1.Standard Boot Screen occurs.2."Windows Error Recovery" Screen. On this screen I have two options, launch startup repair or start windows normally.2a. If I start the startup repair it shows a loading files screen then I am met with the backround of my login screen. No user accounts are shown and all I can control from this screen is my cursor. After a couple seconds, a command prompt window flashes and disappears and from there on I'm stuck on this screen till I unplug the battery or emergency shut off.2b. If I start windows normally the 4 color loading animation starts. Then the computer just bluescreens, and restarts and I'm sent back to step 1.I've tried a lot of things. I've started it in safe mode, done every option off F8, done a lot with my BIOS, and tried reinstalling windows off the windows installation disk. When I try to install windows off the disk, it holds me on the setting up installation screen with the same backround as step 2a.

View 1 Replies View Related

Clean Install Windows 7 - Getting Error 0x80300024?

Aug 20, 2010

I am having some troubles trying to install win 7 home premium. I just finished building this computer with a brand new western digital hard drive 2TB (SATA).Everything on this machine is brand new. When I get to the point to where it asks me "where do you want to install windows?" screen I get this error 0x80300024 or it will just sit there and the little loading icon just hangs there. What is e problem.

View 4 Replies View Related

Windows 7 Clean Install Error 0x80070057

Aug 7, 2012

i tried to do a clean install acording to your suggestion , but this error kept coming up windows error 0x80070057... I'm using asus P6T mobo (no on board gfx option) nvidia gtx285 gfx, 2mb ram, and that's all... The hdd is newly formated..

View 7 Replies View Related

Clean Windows 7 Install On New SSD Installation Error?

Aug 3, 2012

I have a Samsung series 9 (NP9004XC) and I am upgrading the 128gb SSD that came with the computer to a Crucial M4 256GB mSATA. I am doing a clean install from a bootable USB that I created from the recovery disc that was included with the computer.I can load up setup but once I get to the part where I choose what disk I want to install it to I get an error. There is only one disk listed (Disk 0, Partition 1) and when I try to select that disk to install Windows to I get the error:"Windows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the computer's BIOS menu."

View 7 Replies View Related

Clean Install Hangs At Starting Windows Screen

Nov 30, 2009

I am trying to do a clean install of Windows 7 64 bit. It hangs at the starting windows screen and does nothing more. No HDD activity or anything. Let it sit all night like that to see if it would go any further, but it didn't. Anyone else have this experience, and if so, what did you do to make it work?

View 6 Replies View Related

Windows 7 Clean Install Stuck On Start-up Screen?

Dec 4, 2012

So I had finally got my first build ever running a few hours ago. Was so excited. I used the program wintoflash to copy my windows installation cd to my flash drive. Popped the flash drive in my new rig and booted it up. It went to installation and took a bit of time to completely install. As it restarted after install the windows startup came up and was continuously going for quite some time and never stopped. So where I am at is that I cant get past the start up screen.

I have tried so much. I pulled out the second stick of ram, the gpu.. ran memory check with no errors, tried re installing windows in many ways (different partitions).I tried running in safe mode but it just gets stuck at disk. The only thing I knoticed is that windows 7 installs faster the second time around, even after deleting all the memory on the hard drive (advanced option during install). I have browsed the web and nothing has helped. Just got a new mobo after replacing the last defected one today, so that cannot be the problem. Completely and utterly frustrated to be presented with another speedbump after all this hard work to get it running.

My rig:
Intel i-5 3rd gen.
Kingston hyperx 2x8gb
AsRock b75m-dgs motherboard.
nvidia gt 440
Western Digital Caviar 250gb 7200.

View 5 Replies View Related

Windows 7 Clean Install Blue Screen No Icons

Dec 27, 2012

Ive been running Win 7 Ultimate 64 for over a year with no problems. For Christmas I got a new HD because my old ones were full. I copied my files from my two old hard drives to the new one and then tried to do a clean install. After the installation when windows boots for the first time it works, but the picture has about two inches of black space all around and the resolution is at like 800x600. Im pretty sure the only thing i need to do to fix that is install and update my graphics drivers. The problem is after I start installing updates I have to restart windows. When it boots up for the second time all the black space is gone and the picture looks right but it always stops right after the black windows loading screen on the default background with no icons, only my curser. Ive tried to install windows again but the same thing happens. Ive tried safe mode and last known good config. Startup repair finds no problems at all. And when i restore with a system image the problem comes back as soon as I update something then restart.

View 4 Replies View Related

Windows 7 Error Code 0x8007045d During Clean Install

May 7, 2012

emachines em350 netbook with windows 7 installed. For some reason it got messesd up and he tried to do a system restore. Since then when you try to boot up its saying input a password to unlock the harddrive which we dont know. After you input wrong code 3 times you get option to continue which takes you to black screen saying no bootable device detected press any key to continue. Next i tried to do clean install with windows 7 from a usb this goes fine untill it asks for missing cd/dvd driver i have found away round this which is to select cancel then when back on install now screen swap the usb to another port and continue. This works so i select terms and so on then get to part where it asks where to install windows now i have formated and made a active partition on the hard drive but when i try to click next i get error code 0x8007045d this is where im stuck.

View 9 Replies View Related

Error 0x80070002 While Making A Clean Install Of Windows 7 X64?

Jun 1, 2011

After saving money for quite while, i was able to finally buy a new pc, i had assembled other pc`s for my friends and never had any trouble installing windows on their systems, but now, every time i try to install windows 7 x64, the computer hangs while extracting windows files, then, after some time it prompts me with the error 0x80070002, saying that it didn`t find the required files, so i tried with many suggestions:- Updated to the latest BIOS.- Switched the RAM modules from A2 and B2 to A1 and B1 (my cpu fan was in the way so i had to buy another, and yup, i`m living on cup noodles).

- Ran memtest x86+ for 8 hours (no errors)- Ran sea tools but it didnīt detect any drives (still donīt know why, and the windows 7 installer detects the hdd just fine, also tried it on another computer and works fine)- Switched sata cables, switched sata connectors.- Switched from ahci to ide on the Bios, but it didnīt detect any drives after that, so i returned to ahci.- Disassembled all the pc and re-assembled it, re-checked every connection with every install guide 3 times- Tryied to install again, several times, with the same problem, never getting beyond the 48% extraction, mostly 12%, 9% and so on.And right now, iīm poor, un-able to work, and dangerously nearing towards un-employement (sold my previous computer to buy this one, my savings are gone, and canīt afford to get sick, a little problem called "living in Mexico"

View 16 Replies View Related

Error 0x80070002 While Making A Clean Install Of Windows 7 X64

Oct 3, 2012

i just upgrade my windows 7 ultimate to windows 8 9200 then i guess i delete some files and now im having problem with this 0x80070002 error.

View 1 Replies View Related

Windows Error Recovery Screen Keeps Coming Back

Dec 23, 2011

My mothers Dell running Windows 7 has a problem where, soon after powerup, the screen goes to a Windows Error Recovery screen featuring two options, either A) Launch Startup Repair, or B) Start Windows Normally. If A is chosen, then it goes to a screen which says, Loading files at the bottom with a loading bar, then when the bar is full, the screen returns right back to the Windows Error Recovery screen. The same with starting normally.

View 1 Replies View Related

Clean Install Windows 7 From Vista...error Code 0x80070241?

Sep 9, 2010

savvy, and am having troubles installing Windows 7 on my laptop. I purchased the software, downloaded the .iso file from Microsoft's site, then burned the .iso file to a disc. Once on the disc it showed a few different folders and a setup option. I launched the setup option, which brought up the install window for windows 7. I chose clean install because upgrade is not an option for the current version of vista that I have, and while it is copying the files, after about 3% it gives me the error code 0x80070241 and says something about not being able to copy all of the needed files and that some of them may be corrupted. I don't know if this is a problem with my computer or with the disc that I've burned.

View 2 Replies View Related

Error 0x80070057 During Clean Install Of Windows 7 On New Hard Drive?

Dec 17, 2011

What do I do now? I decided to replace my existing hard drive as I thought it was damaged due to viruses. I installed a new hard and then used my Windows 7 Ultimate DVD to install. I got as far as the above. If this question has been answered somewhere else on this site

View 3 Replies View Related

Windows 7 Won't Start, Always Ends Up At Window Recovery Error Screen

Oct 27, 2012

I have a dell desktop computer with windows 7. As soon as you turn it on it goes straight to the "windows error recovery" screen where it has the option to either start system recovery or start windows normally. If I choose system recovery, it just gets stuck on a screen that looks similar to the backround of the loggin screen, but it's just the backround and my mouse. It will stay on this screen for hours until I turn it off. If I start windows normally, it will have the regular "starting windows" screen then it will flash back to the "windows error recovery" screen. If I try booting into safe mode, or loading the last good configuration, it will always bring me back to "windows error recovery". I have the 2 recovery disks I made when the computer was first bought, but when those are inserted, nothing happens and I'm not sure how to open them, it just always ends up at the "windows error recovery" screen. This computer is only about a year old and I have no idea what to do. I just need it to start up again.

View 1 Replies View Related

Troubles Installing Windows (clean Install) - Error Code 0x80070017

Apr 15, 2012

Just inherited a pc, and bought a brand new 1tb hdd yesterday to install windows on. I was foolish at first by not changing any of the bios settings (was a long time since I have done an install) and just left it as it was. I got through to installing windows and it stopped at expanding files with the above error code, which I have heard is really commonWindows cannot install required files. The file may be corrupt or missing. Make sure all files required or installation are available, and restart the installation.Now I am certain there is nothing wrong with the DVD, as it is the same one that has been used on two other PC's. I tried turning it off and restarting, that was when I got another error load up - Bootmgr is missing!After this I restarted it and changed the bios settings to boot from the DVD drive. I tried doing a repair on this through the disc.

Went through all the settings and typed Bootrec.exe/REBUILDBCD in command prompt but that came back fine. I tried clicking startup repair after this but it did not restart, so I just went through the motions and restarted it manually as by this point I was getting frustrated. Upon restart I went through and booted from the DVD, and it went straight through. This time I tried re-installing but deleted all the partitions on the drive which had appeared since trying to install. However the same error message has come up again

View 1 Replies View Related

Error During Clean Install

Jun 26, 2009

I have an old Dell XPS Gen2 desktop that is running WinXP. I wipped my Raid0 hard drives to perform the install of Windows7. After helping the setup see my raided hard drives, I started the install.

After the second step in the installation process I keep getting an error message that says something like: "Windows could not configure your computer's boot sequence. The installation could not continue"

Does anyone know what I'm missing? Could my bios be too out of date for this setup? or is it something else?

View 6 Replies View Related

Windows 7 64bit Clean Install Error, Unable To Create System Partition

Sep 19, 2012

I had 32 bit Windows 7 home premium provided by OEM. Recently I purchased Windows 7 professional 64 bit in order to increase my memory.(My system is 64 bit capable) I followed [1]. I am using USB for installation. I booted the system with USB. Then at disk manager I deleted all the partitions(including recovery ) Then I refreshed and click next and I got an error saying setup unable to create system partition.

View 9 Replies View Related

Clean Install Error 0x80070057

Dec 20, 2009

I'm trying to install Windows 7 and keep getting the error message "0x80070057, Windows Setup could not configure boot manager." I'm using an OEM disk. Can anyone point me in the right direction?

View 5 Replies View Related

Blank/Black Screen Problem During Clean Install

Nov 21, 2009

After few seconds start screen disappears and is repalced by a Black/Blank screen with only mouse pointer. Mouser is working but there is nothing on screen to click on. Keyboard is working fine too. (checked with NumLock and Caps Lock keys)

Nothing happends beyond this point even after rebooting and repeating above process.

Searched internet for above problem symptoms. Looks like Windows 7 decides default monitor on its own. There is no way to decide it yourself duing installation.

My motherboard has two ports. 1 DVI and 1 analog. I have only 1 Analog monitor and do not plan on buying/having another monitor.

DVI to analog convertor is not available in market to test display from DVI port.

Could somebody please help?

View 8 Replies View Related

Clean Install Of Windows 7: Blank Screen With Cursor After Starting Windows 7?

Oct 1, 2012

My old HDD was fried so I decided to use my External HDD to boot off. Afterreformatting the drive I have installed it into my laptop and have attempted to install Windows 7 64bit and its all going great until after the starting windows screen and then it just turns black with the cursor. What I have tried so far....- I have reset the BIOS to defalt-Cleared the CMOS- Checked the RAM (even left 1 2gig stick in and tried that?)

View 1 Replies View Related

Windows 7 Clean Install Hangs At Starting Windows Screen?

Sep 19, 2012

Windows 7 clean install hangs at starting windows screen

View 4 Replies View Related

Windows 7 Clean Install Hangs At Starting Windows Screen

Dec 28, 2012

I recently got a new asus laptop and some of my programs aren't compatible with windows 8. So i'm trying to downgrade to windows 7 because i never liked w8 in the first place. So when i boot from CD (64-bit windows 7 ultimate) it will install without any problems, but when it gets to the 'starting windows' screen the animation freezes and it just stays there.

View 49 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved