I'm trying to install Windows 7 on my PC again, and came to a blank screen after the reboot. I have the PC hooked up to a TV using the S-Video output on my graphics card, and suspect that win 7 is using the DVI port instead. There is no way at the moment that I can use the DVI port because I don't have a monitor that supports it.
is there a way around this so I can use the S-video output for the rest of the installation?
I'm trying to install Windows 7 on a new SSD, my old hard drive crashed. My video card is an onboard ATI Radeon HD 4250. Initial setup works fine, but when the computer reboots it comes back up blank. I'm already running two monitors, one VGA and one DVI, and safe mode doesn't work either, I've tried booting from a flash drive and a dvd with exactly the same results.
View 9 Replies View RelatedAfter few seconds start screen disappears and is repalced by a Black/Blank screen with only mouse pointer. Mouser is working but there is nothing on screen to click on. Keyboard is working fine too. (checked with NumLock and Caps Lock keys)
Nothing happends beyond this point even after rebooting and repeating above process.
Searched internet for above problem symptoms. Looks like Windows 7 decides default monitor on its own. There is no way to decide it yourself duing installation.
My motherboard has two ports. 1 DVI and 1 analog. I have only 1 Analog monitor and do not plan on buying/having another monitor.
DVI to analog convertor is not available in market to test display from DVI port.
Could somebody please help?
My old HDD was fried so I decided to use my External HDD to boot off. Afterreformatting the drive I have installed it into my laptop and have attempted to install Windows 7 64bit and its all going great until after the starting windows screen and then it just turns black with the cursor. What I have tried so far....- I have reset the BIOS to defalt-Cleared the CMOS- Checked the RAM (even left 1 2gig stick in and tried that?)
View 1 Replies View Relatedmy laptop got totally affected by different malwares,trojans..etc. So i used avira to scan my system and removed all the viruses it showed...but after rebooting a black desktop appeared with only cursor present and no icons n no wallpapers....cursor only moves no right-click..i did some searching on how to get my desktop screen back...n i tried Ctrl-Alt-Del..then new task n typing explorer.exe....an error mssg shows up saying u dont have permission..
View 2 Replies View RelatedWhen I try to do a clean install of Windows 7 I get the loading files white progress bar you normally get during an installation, it then goes directly to the scrolling progress bar that would normally appear before a Windows startup, and then goes to a blank Windows 7 desktop with only a cursor (that I can move).I have a computer with the following specs:[CODE]I have tried to install with every version I can get my hands on, both 32 and 64 bit. None of them are upgrade versions. I've tried installing on a fresh WD Raptor and an Intel G25 SSD. All other drives have been disconnected. I've moved my memory around and tried with one stick. My mainboard has the latest official BIOS, although there is a new beta.
I ran the Windows 7 compatibility test and didn't see anything that would cause this problem.I have searched the internet and have not been able to find a solution sonstalling Windows XP has never been a problem, just Windows 7, always with the same problem.This is one of the few times when I have not been able to look around a find an existing answer to a problem and I am stumped.
I just installed a fresh copy of windows 7, the setup process even took me far enough to create the account, time, homegroup settings ect. It seemed successful. Then it restarts one final time and results in a blank screen after the bios screen flashes. I've tried every setting in the BIOS with no avail. Pressing CTRL ALT DEL at the blank screen just restarts the computer, flashes the bios as usual, and then when you should see the windows loading sign it loads a blank screen with no mouse cursor at all.
I've already tried formatting twice and it results in the same exact issue. The computer was working fine before hand, didn't add any hardware or anything.
I'm having problem when i make install windows 7.when the setup is over and the pc restart for the first time windows7, then my screen turn to black and only the logo is appearing down in the corner of the screen..and i was thinking , maybe it want a lot of time to start so i let it for many many hours but it continues to look like that with the black screen and the logo..
So i try to install in another pc and everything gone just perfect!!
WHAT IS THE PROBLEM FOR MY PC? WHAT CA I DO? don't know:
I tried a lot of times to install it, for almost a month every day! what is wrong with my pc? is it real? only mine?
I just did my first build and I am having a big problem with installing windows 7 on it. When I boot it's starts loading and then I get a black screen. I didn't get any options before or any command.
[code]...
I am trying to do a clean install of Windows 7 64 bit. It hangs at the starting windows screen and does nothing more. No HDD activity or anything. Let it sit all night like that to see if it would go any further, but it didn't. Anyone else have this experience, and if so, what did you do to make it work?
View 6 Replies View RelatedSo I had finally got my first build ever running a few hours ago. Was so excited. I used the program wintoflash to copy my windows installation cd to my flash drive. Popped the flash drive in my new rig and booted it up. It went to installation and took a bit of time to completely install. As it restarted after install the windows startup came up and was continuously going for quite some time and never stopped. So where I am at is that I cant get past the start up screen.
I have tried so much. I pulled out the second stick of ram, the gpu.. ran memory check with no errors, tried re installing windows in many ways (different partitions).I tried running in safe mode but it just gets stuck at disk. The only thing I knoticed is that windows 7 installs faster the second time around, even after deleting all the memory on the hard drive (advanced option during install). I have browsed the web and nothing has helped. Just got a new mobo after replacing the last defected one today, so that cannot be the problem. Completely and utterly frustrated to be presented with another speedbump after all this hard work to get it running.
My rig:
Intel i-5 3rd gen.
Kingston hyperx 2x8gb
AsRock b75m-dgs motherboard.
nvidia gt 440
Western Digital Caviar 250gb 7200.
Ive been running Win 7 Ultimate 64 for over a year with no problems. For Christmas I got a new HD because my old ones were full. I copied my files from my two old hard drives to the new one and then tried to do a clean install. After the installation when windows boots for the first time it works, but the picture has about two inches of black space all around and the resolution is at like 800x600. Im pretty sure the only thing i need to do to fix that is install and update my graphics drivers. The problem is after I start installing updates I have to restart windows. When it boots up for the second time all the black space is gone and the picture looks right but it always stops right after the black windows loading screen on the default background with no icons, only my curser. Ive tried to install windows again but the same thing happens. Ive tried safe mode and last known good config. Startup repair finds no problems at all. And when i restore with a system image the problem comes back as soon as I update something then restart.
View 4 Replies View Relatedafter searching on microsoft's website, google and finally Tomshardware... I couldnt find anything close to what im experiencing.My computer was working fine, no issues or problems. I decided to do a fresh install because it had been about 1.5 years. Thats where all the trouble started....I have a legal Copy of windows and a Legal CD I bought from a store so piracy isnt an issue.1) I tried to install windows 7 home prem 64 bit and i kept getting a Missing Boot Mgr message. I figured out that when windows was installing it wasnt creating the 100mb partition for system files and what not.2) After fix that, my computer would not boot to desktop unless i had the Windows 7 CD in... I unplugged all other HDD's (2 Storage), Reformated and it worked.
3) Now once windows finished installing, I opened a few basic programs without installing any drivers or updates. Everything worked, left it up and idled for an hour no problems, ran tests on Mem and HDD no problems either. 4) I did my windows updates and it installed after which it prompted me to restart... I did and thats when the problem happens. I takes a very long time to boot into my desktop and once there, I have a 1920x1080 resolution (from 800x600) and i have no Icons, taskbar or anything but my wallpaper... if i press Alt + Ctrl + Del i get a black screen and if i press ESC i get my wallpaper background back...5) I deleted the partition & reformated, and same issue after updates. The comptuer works perfectly fine in safemode and boots to my desktop... It is very weird. I ran Windows repair and I even open CMD Prompt and typed in the commands to fix the boot, fix the MBR and scan the OS, Everything was fix or operational.
I'm weeks of spasmodic attempts into replacing my old C-drive with a new SSD and a clean install of Windows 7, 32 bit. Here's the current loop: Following Sandisk's instructions on formatting SSD for use as OS with Win 7:
1) I verify BIOS - SATA is (as before) set to ACHI
2) I place Windows 7 upgrade disc in drive, hoping to use "Option 1 - normal clean install" (from Clean Install with a Upgrade Windows 7 Version )
3) I get "Windows Error Recovery" screen, stating "windows did not shut down normally" (white text on black screen), with two options - start normally, or startup repair.
- if I select "start normally," it merely returns (after a minute or two) to the same Error Recovery screen after some POSTs (nothing other than single-beep) - no request for my input, no "press any key," etc.
- if I select default ("startup repair") option load: "Windows cannot repair this computer automatically" ultimately results after a lot of attempting to repair, etc.
PC will still run Ok from old HD when connected, and shows the SSD in Disk Management with a "System Reserved" 100 MB (F) partition along with a 112GB (E) partition. I keep thinking I need to wipe those and try again, but not sure how or if that's even worth trying. I did have the same SSD up and running Win 7 for a brief time - didn't start at some point afterwards...
Windows 7 clean install hangs at starting windows screen
View 4 Replies View RelatedI recently got a new asus laptop and some of my programs aren't compatible with windows 8. So i'm trying to downgrade to windows 7 because i never liked w8 in the first place. So when i boot from CD (64-bit windows 7 ultimate) it will install without any problems, but when it gets to the 'starting windows' screen the animation freezes and it just stays there.
View 49 Replies View RelatedSo, Im doing a clean windows 7 install. Here are the facts: [code] After the final stage of the setup where you enter PC name, set the password, enter time settings etc, the setup restarts the computer for the 'final' time, final indeed.What happens is that after the Bios / device scan, Windows won't boot and it won't continue past the black screen with the white blinking _ showing in the top left.Could this be because C: has been 'occupied' (or set as master partition) by the 1480GB partition and won't boot from the 105GB partition where Windows was installed?It's so weird because the first two reboots go without problem, no need to F8 and manually select the disk rather than the USB pen or anything.. But on the final reboot, nothing.
View 8 Replies View RelatedAfter leaving my comp on overnight i wake up to non-responding programs, i shut down manually and then as i restart this happens. 5minute lag on welcome screen and then it turns blue with a moveable cursor. i have used system restore and created a new user but neither works. i can run perfectly on safe mode.
View 6 Replies View RelatedIt all started when I decided to upgrade to Windows 7 x64 from my Vista x64. I had nothing of importance on the computer, so why not do a clean install and start fresh? It installed fine and rebooted several times until the computer had the Setup Is Checking Video Performance, it froze on that screen. I had to reboot it and now here is my current issue.....
Installation is going fine, goes to Completing Installation and then reboots..Then shows a black screen with blinking cursor for 5 minutes. Then restarts itself and has Windows Recovery Error. I chose Start Windows Normally and it goes to Starting Windows screen with the logo. I've tried letting it sit there for 30 minutes until it restarts itself and states..Windows failed to start. A recent software or hardware change may be the cause..etc etc..
So basically it's just a constant cycle of Starting Windows screen and Windows Recovery Error screen Unless I press f10 to go into the Boot Options.
Gateway FX4710
Intel Core 2 Quad Q9300 / 2.5 GHz
6GB Ram / 667.0 MHz
NVIDIA GeForce 9800 GT / 512.0 MB
Everything shows up fine until the welcome screen after that it normally used to fade to the desktop but now it goes blank. The screen in Black with only the mouse pointer. Its not hung, i can move the mouse pointer. Then after a minute or so it advances to the desktop. Everything on the desktop loads up in less than 5s. The PC runs fine, it is really fast as there are only a few programs, but only boots slow. My total boot time is about 3-5 min. I think it should be like in a minute or so.I have not tweaked much with the system but have installed a few programs like MS office, Nero, Acrobat and Photoshop. These are the only heavy programs in the PC right now. The only games on the PC are AC1 and AC2. I have uninstalled my graphic driver and reinstalled. I already minimized the programs in the msconfig>startup to the minimum. I have run ccleaner, spybot s&d, Antimalware and i also have a trial copy of Kaspersky AV (upgrading later to 1-year license). there are no peripherals attached during boot except the USB keyboard and mouse. A printer is attached too but is most of the time turned off.
View 11 Replies View RelatedI have Dell studio series 1558,I have two issues: After Powering on the laptop and inputting the password for login to Windows 7, I get a black screen with the Mouse cursor active. In the background the login seems to have happened but I don't get to see the Desktop. When i open any program or web page, e.g. yahoo messenger, the messenger/webpage display is very small, i had to manually enlarge it to view properly, i tried changing my screen resolution, but didnt work.
View 12 Replies View RelatedWhen computer starts is says windows is starting and then just get blank screen with cursor.
View 1 Replies View RelatedAfter I turn on my laptop Dell starts and it says her resuming windows and then goes to a blank screen with my cursor. I removed the battery and held the power button but don't know what else to do. I don't have a restore disk. I'm running windows 7.
View 6 Replies View RelatedI seem to have a odd issue with my laptop. Sometimes when i boot into windows there would be a blank screen with a mouse cursor after the starting windows screen. I would have to wait for approximately 5 minutes for it to show up my logon screen. I've been having this issue since the start of the year and have attempted to solve it but they have been unsuccessful. Things i've tried:Reformat Windows (Did it 4 times)Purchasing a SSDReduced the start-up items(barely any)?
View 14 Replies View RelatedI started the machine today and after the welcome screen the screen becomes blank and i get a black screen for about 30 seconds.then i get the task bar and after about 10 seconds i get the desktop.
View 4 Replies View Related1> After Powering on the laptop and inputting the password for login to Windows 7, I get a black screen with the Mouse cursor active. In the background the login seems to have happened but I don't get to see the Desktop.
2> When i open any program or web page, e.g. yahoo messenger, the messenger/webpage display is very small, i had to manually enlarge it to view properly, i tried changing my screen resolution, but didnt work. My screen resolutions are:
Display: 1.Mobile PC Display
Resolution: 1920*1080 (recommended)
Orientation: Landscape.
I opened up my PC to move the front audio cable so that it wasn't sitting on the graphics card (was causing EM interference).When I tried to reboot, my computer now gets to the windows loading screen, then stops outputting video - so the monitor goes blank and eventually turns off. Windows continues to load in the background as I can hear the startup sound play.
Computer Setup:
Gigabyte GA-EX38-DS4 Motherboard
Intel Core 2 Duo E8400 CPU
Gigabyte 670 GTX Factory OC GFX Card
4GB RAM (I think XMS2)
500GB Samsung Spinpoint F3 7200rpm HDD
Corsair 650W modular PSU
Linksys PCIE wireless card (can't remember model)
Things I have tried:
1) Booting into safe mode (works fine, can view the desktop etc.)
2) Booting into low resolution mode (doesn't work, same issue)
3) Booting into safe mode, un-installing the graphics card, booting into normal mode and reinstalling drivers for graphics card (doesn't work, same issue)
4) Trying a different PCI-E slot (doesn't work, same issue)
5) Trying a different output on the graphics card (doesn't work, same issue)
6) Hard CMOS reset (doesn't work, same issue)
7) Trying a different graphics card (even worse, didn't get any video out even at BIOS screen - can't guarantee card is working as I don't have a second machine to test with but it was working the last time I used it a couple of months ago. Second card was ATI rather than Nvidia so shouldn't be using same drivers).
Things I intend to try but haven't had time:
1) Plugging into a different monitor (heard some people mentioning it may be to do with the monitor drivers not reporting max screen settings properly, I could find any windows 7 x64 drivers for my monitor as its so old but I do have a TV I can test with)
I let computer downlod updates for windows 7 and then when I hit restart like it said I had to for updates to be complete the screen went blank and the computer justs sits with a black screen. Because it is a laptop I can't power it off and when I try to hit the power button nothing happens. How do I get the computer to start again?
View 2 Replies View RelatedI recently used one key recovery for my lenovo laptop, after restoring, the windows logo is shown but after that my system goes into blank screen mode although the audio can be heard. But when i try with safe mode then i am able to see the screen, what can be the issue??
View 2 Replies View RelatedI am getting an error "cannot install" 0x80070714 when I try to install windows 7 into a clean disk and the installation just stops..
View 3 Replies View RelatedI'm working on a re-install of all components following a complete corruption of the boot sector on my drive which could not be fixed with repairs. The last time I installed everything fresh, I had no issues. Between then and now, there have been no hardware changes on my system, but now I am having issues installing the IDT Codecs. I keep getting an error along the following lines: Quote: ExitError: Error=Device Object not present, restart the system and run setup again. Running under compatibility mode, and running drivers from both the motherboard CD and the manufacturer website both have the same effect. The CD, when booted, says "This OS not support!" and only contains 32-bit vista codecs. ECS' website download indicates the IDT drivers as being compatible with Windows 7. Both do not work. It is almost as if the hardware "disappeared," despite the fact that I was using the drivers quite successfully till just 2 days ago, when the boot sector went kaput.
Windows has installed its own default set, which do nothing to power the 8mm jacks which I use with my speakers, but instead put sound through the HDMI, which is useless because I use a dedicated graphics card. I have tried uninstalling this codec and re-installing IDT, to no effect. Windows replaces with its own default codec.I have referenced this thread here, but offered solutions do not seem to work for me: Intel IDT Audio Driver will not install