After I turn on my laptop Dell starts and it says her resuming windows and then goes to a blank screen with my cursor. I removed the battery and held the power button but don't know what else to do. I don't have a restore disk. I'm running windows 7.
View 6 Replies
After leaving my comp on overnight i wake up to non-responding programs, i shut down manually and then as i restart this happens. 5minute lag on welcome screen and then it turns blue with a moveable cursor. i have used system restore and created a new user but neither works. i can run perfectly on safe mode.
View 6 Replies View RelatedWhen computer starts is says windows is starting and then just get blank screen with cursor.
View 1 Replies View Relatedtwo day ago i turned on my pc as usual. But it did not boot, instead i got a black screen with blinking cursor, so is there any way to make my pc recover from this issue.
I've tried the f8 , it has No effect I even re installed the os but it does not work.. It does all installation work asks for my name and pc name . Then it does the video and perfomance testing . Then it restarts and i again get the blank screen with blinking cursor.
I was all good working on my computer when I decided to restart my computer because "rocketdock" (a dock program) didn't open a folder and gave me the "open with" dialog instead.
Background:- I've installed a lot of updates recently, including SP1. The windows is customized i.e. some files are edited. I used tune up registry cleaner, which caused a problem in Chrome, so I used a command found on the Internet, it made tons of errors (which was mentioned by the one who suggested the command) and the computer CPU was fully loaded, the command was replacing files, or something like that. When I remember the command I'll post.
PS: "Ctrl+Alt+Delete", "Ctrl+Shift+Esc", and "Ctrl+L" don't do anything. PS2: Safe Mode loads into the same screen.
I thought I would start to describe this issue by telling you what I screwed up on and how I made it happen: I accidentally set my backup drive as my primary (set the partition as active in CMD, it has no installation on it). Then when I went to boot my device, it would tell me that Windows was not installed. I put my C: (main, primary) partition as my default again (with CMD on installation disk) and I was able to get Windows to boot. Then I messed with the MBR to try to fix it and now this happens:
Current problem: When I boot Windows, it give me the old Vista-looking boot scroller (Not "starting windows" with the traditional animation). This animation only lasts for about 3 seconds, then it goes to a black screen with the cursor. That is all. Nothing loads, yet no error message. I tried using a few bootrec commands to fix it using the installation CD's CMD but no luck.
have Windows 7 Home edition on a HP dv4 series laptop. Couple of days back I was browsing through a website suddenly the the windows was shutdown. I assumed it was some virus workWhen I try to restart windows it is taking me upto the HP boot options then I get a blank screen with a cursor at the top left corner.The following did not work,1) Booting via the recovery disk2) Booting via recovery hard disk3) I created a USB boot with Ubuntu and even the USB is not getting detected
View 1 Replies View RelatedEverything shows up fine until the welcome screen after that it normally used to fade to the desktop but now it goes blank. The screen in Black with only the mouse pointer. Its not hung, i can move the mouse pointer. Then after a minute or so it advances to the desktop. Everything on the desktop loads up in less than 5s. The PC runs fine, it is really fast as there are only a few programs, but only boots slow. My total boot time is about 3-5 min. I think it should be like in a minute or so.I have not tweaked much with the system but have installed a few programs like MS office, Nero, Acrobat and Photoshop. These are the only heavy programs in the PC right now. The only games on the PC are AC1 and AC2. I have uninstalled my graphic driver and reinstalled. I already minimized the programs in the msconfig>startup to the minimum. I have run ccleaner, spybot s&d, Antimalware and i also have a trial copy of Kaspersky AV (upgrading later to 1-year license). there are no peripherals attached during boot except the USB keyboard and mouse. A printer is attached too but is most of the time turned off.
View 11 Replies View RelatedJust today I upgraded from Vista to Windows 7. This was a problem I had a few months ago with Vista on this same laptop, and I was hoping it would be fixed with Windows 7, but apparently it hasn't.
I just finished the installation and final reboot and everything, and I logged in, only to have the Welcome spinning circle on the screen for about 30-45 seconds, and then a blank screen with a moving cursor, but nothing else. After using Ctrl-Alt-Del to log out, I logged back in, and this time after 25-30 seconds of the Welcome spinning circle it logged me in.
Like I said, this was an occasional problem I had with Vista as well, but if possible, now that I'm using Windows 7 I'd like for it to not be a problem at all.
I'm running a 5 month old HP G60 laptop. During the upgrade process today I had to update my BIOS and everything else, so I think those should be fine. I just thought this would be the best place to ask if others have had the same problems and if so, what they did to fix it.
my son has a toashiba satellite pro L450D-12x it goes past set up screen then to a blank screen (in black ) with a flashing line in the left corner how can i get it to load properley? before it did this it said media cable fail or something like that and i restored bios back to restore settings and it was also turning itsself off now and again.
View 12 Replies View RelatedI recently dualbooted Linux Mint and Windows 7 on my laptop. Yesterday I removed the Linux partition without thinking, and forgetting about the GRUB bootloader. I'm at a stump now. When I try and turn on my computer, the Toshiba logo appears, then the screen goes blank with a blinking cursor. I searched the internet all of today and most of yesterday, all that did was tell me to do the bootsect /nt670 /fixmbr and all it's variations[CODE]
View 2 Replies View RelatedI have a HP netbook running Windows 7 Starter edition that I only had for about 2 months anyways this morning I started it up and got the HP logo screen briefly and then a black screen with a white cursor in the top left hand corner. I can get to the BIOS menu and I have tried restoring to default but that didn't do anything. I then unplugged ac adapter and battery and help power button down for a min. and then put battery and ac adapter back in and started it.
View 1 Replies View RelatedFormatted Windows 7 loads shows Win 7 Logo and Screen blank with cursor
I have an Acer laptop 4551, got hit by nasty viruses and on top no restore intact.
I formatted the hard drive which gave me an error 83% and stopped. Today I turned on laptop to install fresh genuine Windows 7, I popped in the DVD and done everything in BIOS selected Boot from CD. Everything was Ok I hit enter to Continue then comes the Windows 7 logo and after that a blank black screen with Cursor, that's it! I done that some 5/6 times but no luck.
My old HDD was fried so I decided to use my External HDD to boot off. Afterreformatting the drive I have installed it into my laptop and have attempted to install Windows 7 64bit and its all going great until after the starting windows screen and then it just turns black with the cursor. What I have tried so far....- I have reset the BIOS to defalt-Cleared the CMOS- Checked the RAM (even left 1 2gig stick in and tried that?)
View 1 Replies View RelatedI've been using my laptop for a while now and had a friend install Windows 7 onto it (because i'm quite rubbish with this sort of thing) and everything has been going great until a few weeks ago.
I loaded it up one day and everything is going fine until it reaches the part where it's supposed to load the log on screen. Instead of a log on screen all i am getting is a black screen with the cursor. Now i can't give you specs to my computer or anything of the like because i simply don't have access to it but i can give as much aid as possible to help find the problem.
One of the things that happens is that when the black screen & cursor appears if i move the mouse or push any buttons the screen goes VERY dim as if i've put it into a lower power mode or i've taken out the power cable. If i push the power button to turn it off even if it's just a tap on the button the screen will go off immediatly even if the laptop is still running.
One of the green lights that i believe is showing if the hard drive is busy or not flashes during the process but after a minute or so of the black screen it'll stop flashing altogether.
I've tried all three safe modes with all the same results, F8 to system repair has given me no love with startup repair finding NOTHING wrong, memory check running through the process only for the same thing to happen and system restore has no restore points to go to.
I've looked for answers in several places and some say i have to use sticky keys to get the screen to come on but the problem is that as of last nights use i turned sticky keys off for a few minutes so i could play a game and forgot to turn them back on afterwards. I've taken a look around the net and can't find a fix to my problem. Reinstall simply is not an option under my current circumstances so i really need a favourable reply.
does anyone know what I can do about this problem?
View 1 Replies View RelatedWhen I try to do a clean install of Windows 7 I get the loading files white progress bar you normally get during an installation, it then goes directly to the scrolling progress bar that would normally appear before a Windows startup, and then goes to a blank Windows 7 desktop with only a cursor (that I can move).I have a computer with the following specs:[CODE]I have tried to install with every version I can get my hands on, both 32 and 64 bit. None of them are upgrade versions. I've tried installing on a fresh WD Raptor and an Intel G25 SSD. All other drives have been disconnected. I've moved my memory around and tried with one stick. My mainboard has the latest official BIOS, although there is a new beta.
I ran the Windows 7 compatibility test and didn't see anything that would cause this problem.I have searched the internet and have not been able to find a solution sonstalling Windows XP has never been a problem, just Windows 7, always with the same problem.This is one of the few times when I have not been able to look around a find an existing answer to a problem and I am stumped.
Recently, my computer starts up windows and after the loading screen it just sits at a black screen forever with a cursor and it doesn't even make it to the log in screen. I have tried safe mode with the same results. What I've Done So FarTried to Repair Startup with Windows DVD Tried to use sfc /scannow at boot (Says pending changes and needs to restart) Tried logging into my Ubuntu partition and virus scanning (None found) Tried copying Reg Files from Regback into config while I was in Linux Tried to Repair Install (But I can't log into Windows ) Tried to bootrec /fixmbr /fixbot /RebuildBcd (Which destroyed my dual boot linux grub, but I was desperate. And still nothing) Interestingly though, after I do /RebuildBcd command it says something like "Found Windows Installations: 0" Tried to System Restore (Gave me an Error, wouldn't you know) At this point I'm not to confident that this can be fixed. If anyone has any ideas I'm willing to try. Or if you have any snazzy suggestions on how I could fix it using another computer, I have a different Windows Pro x64 computer that I can put the HD in if there's someway I can save my data/fix it/repair install from there. I just don't know how.
Edit: I finished the chkdsk and there were no bad sectors, though it did give me a message "Failed to transfer logged messages to the event log with status 50."I did a Windows Defender Offline scan with no viruses and I'm currently scanning with Kaspersky Rescue disk. I don't believe it is a virus, I think it's a corruptregistry at this point. I had just cleaned my registry with CCleaner before the shutdown that led to this >.<
I'm using I have a DELL4500S desktop, on startup it will not go to the login screen, the screen is just black with the cursor showing. I've tried restarting the computer, unplugging everything and restarting it. Nothing is working. When it first starts a pop up shows and says "This Application has failed to start because SAMLIB.dll was not found. Re-installing the application may fix the problem."I'm not sure what it's talking about and what to re install and I can't reinstall whatever it is because I can't get to the start menu.
View 3 Replies View RelatedI have Dell studio series 1558,I have two issues: After Powering on the laptop and inputting the password for login to Windows 7, I get a black screen with the Mouse cursor active. In the background the login seems to have happened but I don't get to see the Desktop. When i open any program or web page, e.g. yahoo messenger, the messenger/webpage display is very small, i had to manually enlarge it to view properly, i tried changing my screen resolution, but didnt work.
View 12 Replies View RelatedI seem to have a odd issue with my laptop. Sometimes when i boot into windows there would be a blank screen with a mouse cursor after the starting windows screen. I would have to wait for approximately 5 minutes for it to show up my logon screen. I've been having this issue since the start of the year and have attempted to solve it but they have been unsuccessful. Things i've tried:Reformat Windows (Did it 4 times)Purchasing a SSDReduced the start-up items(barely any)?
View 14 Replies View RelatedI started the machine today and after the welcome screen the screen becomes blank and i get a black screen for about 30 seconds.then i get the task bar and after about 10 seconds i get the desktop.
View 4 Replies View Related1> After Powering on the laptop and inputting the password for login to Windows 7, I get a black screen with the Mouse cursor active. In the background the login seems to have happened but I don't get to see the Desktop.
2> When i open any program or web page, e.g. yahoo messenger, the messenger/webpage display is very small, i had to manually enlarge it to view properly, i tried changing my screen resolution, but didnt work. My screen resolutions are:
Display: 1.Mobile PC Display
Resolution: 1920*1080 (recommended)
Orientation: Landscape.
I opened up my PC to move the front audio cable so that it wasn't sitting on the graphics card (was causing EM interference).When I tried to reboot, my computer now gets to the windows loading screen, then stops outputting video - so the monitor goes blank and eventually turns off. Windows continues to load in the background as I can hear the startup sound play.
Computer Setup:
Gigabyte GA-EX38-DS4 Motherboard
Intel Core 2 Duo E8400 CPU
Gigabyte 670 GTX Factory OC GFX Card
4GB RAM (I think XMS2)
500GB Samsung Spinpoint F3 7200rpm HDD
Corsair 650W modular PSU
Linksys PCIE wireless card (can't remember model)
Things I have tried:
1) Booting into safe mode (works fine, can view the desktop etc.)
2) Booting into low resolution mode (doesn't work, same issue)
3) Booting into safe mode, un-installing the graphics card, booting into normal mode and reinstalling drivers for graphics card (doesn't work, same issue)
4) Trying a different PCI-E slot (doesn't work, same issue)
5) Trying a different output on the graphics card (doesn't work, same issue)
6) Hard CMOS reset (doesn't work, same issue)
7) Trying a different graphics card (even worse, didn't get any video out even at BIOS screen - can't guarantee card is working as I don't have a second machine to test with but it was working the last time I used it a couple of months ago. Second card was ATI rather than Nvidia so shouldn't be using same drivers).
Things I intend to try but haven't had time:
1) Plugging into a different monitor (heard some people mentioning it may be to do with the monitor drivers not reporting max screen settings properly, I could find any windows 7 x64 drivers for my monitor as its so old but I do have a TV I can test with)
I let computer downlod updates for windows 7 and then when I hit restart like it said I had to for updates to be complete the screen went blank and the computer justs sits with a black screen. Because it is a laptop I can't power it off and when I try to hit the power button nothing happens. How do I get the computer to start again?
View 2 Replies View RelatedI recently used one key recovery for my lenovo laptop, after restoring, the windows logo is shown but after that my system goes into blank screen mode although the audio can be heard. But when i try with safe mode then i am able to see the screen, what can be the issue??
View 2 Replies View RelatedWin7 (64 bit) will not boot into regular or safe mode, after log in I get a black screen w / cursor, and that is it. I believe the registry is corrupted. I attempted a repair with the win7 disk, that did not help.
View 4 Replies View RelatedI get only black screen with mouse cursor. As mentioned in some blog I went the registry through ctrl+alt+Del key. went to winlogin and had not found on other key on shell excepting explorer.exe. Hence did not delete any keys.
View 1 Replies View RelatedI have a laptop that came into my shop last week, an HP G62 with Windows 7 Home Premium 64-bit. The user needed immediate file recovery which was done without a problem, and then I went to town on fixing the issue.The customer reported a "memory error" popping up before they shut the computer down. Upon restart, Windows would only load to a black screen with the mouse cursor. I've encountered this in the past and through various methods, such as CTRL+ALT+DEL or Startup Repair, but this one has eluded me for some time.No matter what I do, I can not get anything to launch on this computer. Windows from the hard drive, Windows from the install CD, built in Startup Repair, and Windows in every single startup mode all returns a black screen with the cursor. No shortcut keys seem to do anything.
I have also connected it to an external monitor to see if that was an issue, and it wasn't. I have tried UBCD to no avail, it just doesn't start. I have tried BartPE with a Window XP Pro install and received a blue screen.I have connected the hard drive as an external and run virus and malware scans with no issues found. I have tried to run CHKDSK, but the drive hangs about halfway through. The files, however, are all accessible and able to be moved/removed, but it does not allow me to change permissions. I have heard about this being a permission error, but I have had no luck in that department.The cd-rom drive works as I have just tried Paragon Partition Manager to use the boot corrector, however, it seems to be to no avail either.MemTest turned up no errors. Just to be sure I ran it with each memory stick going solo, same results.
i have a lenovo thinkpad edge 14" running 64-bit windows 7 home premium. the laptop didn't come with any CD's, everything was pre-loaded on. all i get when i boot it is a black screen with a blinking cursor , when it boots all it shows is the thinkpad splash screen then straight to the blinking cursor. i have access to a lenovo x220 running the same (i.e. 64-bit Windows 7 home premium) however no CD drive, the edge 14" does have a cd drive. looked at multiple articles on seven forums but none of them help because i dont have a cd burner
View 6 Replies View RelatedI woke up this morning and restarted my computer. When it restarted all I got was a black screen with a cursor. I've tried safe mode, and normal mode. I've tried startup repair which goes to a "windows file are loading" screen then once its fully loaded goes back to a black screen with a cursor. I've put in the install disk, and boot from it. It does the exact same thing as the repair start up. Which eventually just leads me back to a black screen with a cursor! What can I do? Nothing is working!!
View 5 Replies View Related
