Windows Wont Boot Up - Blank Screen With Cursor

Apr 25, 2012

I thought I would start to describe this issue by telling you what I screwed up on and how I made it happen: I accidentally set my backup drive as my primary (set the partition as active in CMD, it has no installation on it). Then when I went to boot my device, it would tell me that Windows was not installed. I put my C: (main, primary) partition as my default again (with CMD on installation disk) and I was able to get Windows to boot. Then I messed with the MBR to try to fix it and now this happens:

Current problem: When I boot Windows, it give me the old Vista-looking boot scroller (Not "starting windows" with the traditional animation). This animation only lasts for about 3 seconds, then it goes to a black screen with the cursor. That is all. Nothing loads, yet no error message. I tried using a few bootrec commands to fix it using the installation CD's CMD but no luck.

View 8 Replies


ADVERTISEMENT

5min Delay On Welcome Screen, Then Blank Screen With Cursor (windows 7)

Jul 6, 2012

After leaving my comp on overnight i wake up to non-responding programs, i shut down manually and then as i restart this happens. 5minute lag on welcome screen and then it turns blue with a moveable cursor. i have used system restore and created a new user but neither works. i can run perfectly on safe mode.

View 6 Replies View Related

Windows 7 Blank Screen With Cursor?

Sep 4, 2011

When computer starts is says windows is starting and then just get blank screen with cursor.

View 1 Replies View Related

Blank Screen With Cursor On Windows 7?

Sep 30, 2012

After I turn on my laptop Dell starts and it says her resuming windows and then goes to a blank screen with my cursor. I removed the battery and held the power button but don't know what else to do. I don't have a restore disk. I'm running windows 7.

View 6 Replies View Related

Blank Screen With Blinking Cursor Windows 7

Dec 8, 2012

two day ago i turned on my pc as usual. But it did not boot, instead i got a black screen with blinking cursor, so is there any way to make my pc recover from this issue.

I've tried the f8 , it has No effect I even re installed the os but it does not work.. It does all installation work asks for my name and pc name . Then it does the video and perfomance testing . Then it restarts and i again get the blank screen with blinking cursor.

View 2 Replies View Related

Windows (7 Ultimate X64) Boots Into A Blank Screen With A Cursor

Feb 11, 2012

I was all good working on my computer when I decided to restart my computer because "rocketdock" (a dock program) didn't open a folder and gave me the "open with" dialog instead.

Background:- I've installed a lot of updates recently, including SP1. The windows is customized i.e. some files are edited. I used tune up registry cleaner, which caused a problem in Chrome, so I used a command found on the Internet, it made tons of errors (which was mentioned by the one who suggested the command) and the computer CPU was fully loaded, the command was replacing files, or something like that. When I remember the command I'll post.

PS: "Ctrl+Alt+Delete", "Ctrl+Shift+Esc", and "Ctrl+L" don't do anything. PS2: Safe Mode loads into the same screen.

View 3 Replies View Related

Windows 7 Not Booting - Blank Screen With A Cursor At The Top Left Corner?

Mar 19, 2012

have Windows 7 Home edition on a HP dv4 series laptop. Couple of days back I was browsing through a website suddenly the the windows was shutdown. I assumed it was some virus workWhen I try to restart windows it is taking me upto the HP boot options then I get a blank screen with a cursor at the top left corner.The following did not work,1) Booting via the recovery disk2) Booting via recovery hard disk3) I created a USB boot with Ubuntu and even the USB is not getting detected

View 1 Replies View Related

Startup Delay After Login Screen - Blank Screen With Cursor?

Dec 31, 2010

Everything shows up fine until the welcome screen after that it normally used to fade to the desktop but now it goes blank. The screen in Black with only the mouse pointer. Its not hung, i can move the mouse pointer. Then after a minute or so it advances to the desktop. Everything on the desktop loads up in less than 5s. The PC runs fine, it is really fast as there are only a few programs, but only boots slow. My total boot time is about 3-5 min. I think it should be like in a minute or so.I have not tweaked much with the system but have installed a few programs like MS office, Nero, Acrobat and Photoshop. These are the only heavy programs in the PC right now. The only games on the PC are AC1 and AC2. I have uninstalled my graphic driver and reinstalled. I already minimized the programs in the msconfig>startup to the minimum. I have run ccleaner, spybot s&d, Antimalware and i also have a trial copy of Kaspersky AV (upgrading later to 1-year license). there are no peripherals attached during boot except the USB keyboard and mouse. A printer is attached too but is most of the time turned off.

View 11 Replies View Related

Goes To Blank Screen With Cursor After Log-in

Dec 22, 2009

Just today I upgraded from Vista to Windows 7. This was a problem I had a few months ago with Vista on this same laptop, and I was hoping it would be fixed with Windows 7, but apparently it hasn't.

I just finished the installation and final reboot and everything, and I logged in, only to have the Welcome spinning circle on the screen for about 30-45 seconds, and then a blank screen with a moving cursor, but nothing else. After using Ctrl-Alt-Del to log out, I logged back in, and this time after 25-30 seconds of the Welcome spinning circle it logged me in.

Like I said, this was an occasional problem I had with Vista as well, but if possible, now that I'm using Windows 7 I'd like for it to not be a problem at all.

I'm running a 5 month old HP G60 laptop. During the upgrade process today I had to update my BIOS and everything else, so I think those should be fine. I just thought this would be the best place to ask if others have had the same problems and if so, what they did to fix it.

View 1 Replies View Related

Blank Screen And Flashing Cursor?

Aug 11, 2011

my son has a toashiba satellite pro L450D-12x it goes past set up screen then to a blank screen (in black ) with a flashing line in the left corner how can i get it to load properley? before it did this it said media cable fail or something like that and i restored bios back to restore settings and it was also turning itsself off now and again.

View 12 Replies View Related

Blank Screen With Blinking Cursor?

Jul 5, 2010

I recently dualbooted Linux Mint and Windows 7 on my laptop. Yesterday I removed the Linux partition without thinking, and forgetting about the GRUB bootloader. I'm at a stump now. When I try and turn on my computer, the Toshiba logo appears, then the screen goes blank with a blinking cursor. I searched the internet all of today and most of yesterday, all that did was tell me to do the bootsect /nt670 /fixmbr and all it's variations[CODE]

View 2 Replies View Related

Starting Up To Blank Screen With White Cursor?

May 8, 2011

I have a HP netbook running Windows 7 Starter edition that I only had for about 2 months anyways this morning I started it up and got the HP logo screen briefly and then a black screen with a white cursor in the top left hand corner. I can get to the BIOS menu and I have tried restoring to default but that didn't do anything. I then unplugged ac adapter and battery and help power button down for a min. and then put battery and ac adapter back in and started it.

View 1 Replies View Related

Formatted Windows 7 Loads Shows Windows 7 Logo And Screen Blank With Cursor

Oct 28, 2011

Formatted Windows 7 loads shows Win 7 Logo and Screen blank with cursor

I have an Acer laptop 4551, got hit by nasty viruses and on top no restore intact.
I formatted the hard drive which gave me an error 83% and stopped. Today I turned on laptop to install fresh genuine Windows 7, I popped in the DVD and done everything in BIOS selected Boot from CD. Everything was Ok I hit enter to Continue then comes the Windows 7 logo and after that a blank black screen with Cursor, that's it! I done that some 5/6 times but no luck.

View 1 Replies View Related

Clean Install Of Windows 7: Blank Screen With Cursor After Starting Windows 7?

Oct 1, 2012

My old HDD was fried so I decided to use my External HDD to boot off. Afterreformatting the drive I have installed it into my laptop and have attempted to install Windows 7 64bit and its all going great until after the starting windows screen and then it just turns black with the cursor. What I have tried so far....- I have reset the BIOS to defalt-Cleared the CMOS- Checked the RAM (even left 1 2gig stick in and tried that?)

View 1 Replies View Related

Blank Screen With Cursor But No Log On Screen

Oct 3, 2009

I've been using my laptop for a while now and had a friend install Windows 7 onto it (because i'm quite rubbish with this sort of thing) and everything has been going great until a few weeks ago.

I loaded it up one day and everything is going fine until it reaches the part where it's supposed to load the log on screen. Instead of a log on screen all i am getting is a black screen with the cursor. Now i can't give you specs to my computer or anything of the like because i simply don't have access to it but i can give as much aid as possible to help find the problem.

One of the things that happens is that when the black screen & cursor appears if i move the mouse or push any buttons the screen goes VERY dim as if i've put it into a lower power mode or i've taken out the power cable. If i push the power button to turn it off even if it's just a tap on the button the screen will go off immediatly even if the laptop is still running.


One of the green lights that i believe is showing if the hard drive is busy or not flashes during the process but after a minute or so of the black screen it'll stop flashing altogether.

I've tried all three safe modes with all the same results, F8 to system repair has given me no love with startup repair finding NOTHING wrong, memory check running through the process only for the same thing to happen and system restore has no restore points to go to.

I've looked for answers in several places and some say i have to use sticky keys to get the screen to come on but the problem is that as of last nights use i turned sticky keys off for a few minutes so i could play a game and forgot to turn them back on afterwards. I've taken a look around the net and can't find a fix to my problem. Reinstall simply is not an option under my current circumstances so i really need a favourable reply.

View 7 Replies View Related

Windows 7 Won't Boot - Black Screen With Moveable Cursor

Mar 5, 2011

Alright, so my Acer laptop has been working fine with no problems at all since i bought it about 2 years ago. This was until yesterday where i turned it on, just to see no login screen, only a black screen with a moveable cursor

I tried ctrl+alt+delete didn't work

I tried to repair windows with the repair disc through a USB, didnt work. It said that windows couldn't automaticly fix the issue, in the log it said:

Problem Signature:
Problem Event Name: StartupRepairOffline
Proglem Signature 01: 6.1.76900.16385
Proglem Signature 02: 6.1.76900.16385
Proglem Signature 03: Unknown
Proglem Signature 04: 0
Proglem Signature 05: Autofailover
Proglem Signature 06: 8
Proglem Signature 07: BadDriver

I tried to restore to previous system points, but didn't have any for some reason

When i boot from the repair disc, i'm able to get into the menu where i chose OS, and found out that when i press Load Drivers, i'm able to access my HDD, where everything seems to be intact, already copied some important work stuff to a seperate HDD if *** won't get working

View 9 Replies View Related

When Boot Up Windows 7 / Only Get A Black Screen With White Cursor

Jan 28, 2013

I turn on my computer to eventually get a black screen with white cursor that will move around. The Toshiba insignia comes up beforehand as well as the windows four square icon then it is to this black screen and white cursor. I cant seem to get the computer to boot up from Windows 7 installation disc. Sometimes I also get a BOOTMGR image is corrupt. The system cannot boot. message as well. I imagine there is a solution of sorts as it seems many people have had a similar problem. I have a freind who maybe able to fix it seeing he is a computer programmer but that is not until the end of the week.

View 1 Replies View Related

Black Screen With Blinking Cursor On Restart - Windows 7 Does Not Boot

Nov 28, 2011

I have purchased an OEM pc yesterday and I installed windows 7 x64 on it. Everything went great with installation. No errors or anything. But when I restarted my computer, after the motherboard splash screen a black screen with a blinking cursor top left appears and windows doesn't boot. But sometimes, especially when I wait a few minutes to turn it on it boots normally till I shut it down. It is so random.

My specs are:
Motherboard: gigabyte 970a d-3
Memory: CORSAIR 4GB VENGEANCE DDR3 1600MHZ CL9(*2)
CPU: AMD phenom ii x6 1100t black edition 3 .3ghz
GPU: Sapphire hd 6870 1GHZ
PSU:700watt
OS: Windows 7 Ultimate x64

View 18 Replies View Related

Windows 7 On Laptop Will Not Boot It Goes To The Toshiba Screen Then Black With Cursor In Top Left

Nov 2, 2012

windows 7 on my laptop will not boot it goes to the toshiba screen then black with cursor in top left. i cannot go to safe mode or startup repair because when you hold F8 or any other key it just beeps. im trying to keep from trying the factory reset.

View 1 Replies View Related

Windows 7 On Laptop Will Not Boot It Goes To The Toshiba Screen Then Black With Cursor In Top Left

Nov 2, 2012

windows 7 on my laptop will not boot it goes to the Toshiba screen then black with cursor in top left. i cannot go to safe mode or startup repair because when you hold F8 or any other key it just beeps. im trying to keep from trying the factory reset.

View 1 Replies View Related

Boot To Blank Screen

May 9, 2009

I'm having a strange issue with RC1 x32 on my Dell XPS M1330. Everything was working fine a few days ago. It's a relatively fresh install (all I have is avast, itunes, firefox). Now when I boot all I get is a blank screen with a mouse in the center. There's hard drive activity, and I can move the mouse, but I can't login. I've tried typing my password and hitting enter to no avail. Also tried sleep cycling it, no luck.

I think it might be related to a driver called zFlashpoint that I just installed for my SSD. It's been rumored to corrupt parts of the registry. Does anyone have an idea how I can fix this if it's the case? I have a desktop which I can put the SSD in to perform repairs.

View 5 Replies View Related

Blank Screen At Boot Up?

Sep 6, 2011

Yesterday I recognized, that my screen was blank at start up.I rebooted in safemode, and then the screen was ok.There I restored the computer to an earlier state, and it ran ok afterThe same ocured this morning, and now I don't have the opportunity torestore as there is no restore point.What I did when the computer ran ok was that I started up NFS.

View 1 Replies View Related

Blank PC Screen On Boot Up?

Dec 4, 2012

I'm hoping there' an easy solution that I may not have located yet. A few days ago I sat down at Windows 7 PC and foud the scree wouldn't wke up from sleep mode. Had to force a PC restart and still tyhe same problem I could hear Windows booting and Icold ellwhe I needed to enter my password, could hear Skype etc starting in the background but absolutely nothing from the monitor. So I started in Safe Mode and that worked fine (ie monitor worked fine). So I'm hoping this means there's nothing nasty happened to the memory or anyhing like that. Tried a system restore and still no joy.

View 2 Replies View Related

HP Pavilion DV6 - Blank Screen, No Boot, LED's On?

Feb 16, 2011

I installed some drivers for my iphone, install with no props, when asked to restart, I do.(This have nothing to do with the iPhone)When computer automatic power on, no screen is shown, no boot, and all LED's is on.1st try:I let i stay that way for 20 mins, when i look to it, the fan is running like hell, and ite hot! - FAILEDnd:I let it cool off, and try to power it on with alt key pressed - FAILED3rd:I take out AC, then battery and hold down power button for one minute, plug in AC and try again - FAILED4th:I take out HD, RAM, RTC battery, let it stand empty for and hour, put it all back - FAILED5th:I try to take out only RAM's and plugged them back in every diffrent way i could - FAILED6th and last:Plugged out HD, turned on the computer, and it acted like it never had been removed

View 2 Replies View Related

2 Minute Blank Screen Before Boot Up

Mar 4, 2009

I recently have noticed longer boot times with my computer. This happens with Vista or 7 both 64 bit.

After I am at the OS select screen, ill see the little Windows load screen w/ the small bar. After that I get a blank screen that lasts as long as 2 minutes before Im taken to the log-in/welcome.

There is no cursor, just a blank screen. I noticed this when for Vista 64, but did not see it when I had 7022 on the Win 7 side. But now see it as well for Build 7048.

View 9 Replies View Related

Black Screen With Cursor After Boot?

Jul 29, 2011

I have been getting an alert that I have updates to windows 7, but they never seem to actually install. Tonight it didn't seem like my audio drivers were working anymore.On my other computer I realized that Custopack tools, which is a theme customization program that alters uxtheme.dll, wasn't working with the new service pack. So with this laptop I restored the default windows theme and rebooted, and got my audio back. However, I went to shut down, which would also install the update, and when I booted back up, Windows won't even start.I get past the bios, and then there's just a blinking cursor. The door on the CD-ROM works but the caps lock and num lock do not.

View 2 Replies View Related

Samsung Laptop Boot Up But Screen Is Blank

Oct 29, 2012

It worked ok up to now apart from many times when I clicked the back button it would not bring the privious page instead, it would bring blank page and then i had to close and start from beginning. today it worked ok until an hour ago, when the screen suddenly turned blank. i tried to shut down from the on/off button but the screen still blank and no button would have any effect on the screen.

View 2 Replies View Related

Black Screen With Flashing Cursor On Boot Up?

Oct 5, 2011

First off I have a Dell Inspiron n7010 system running Windows 7 Home 64bit

OK the other night I shut down my system and all seemed fine until next day. I went to reboot and got the normal Dell splash screen with both the Set Up (F2) and Boot (F12) options. After the Dell screen finished it then went to load Windows, but instead I got a Black Screen with Flashing Cursor. Can't move cursor at all.

On the Dell screen I can access the Set Up (F2) bios pages. I can also access the Boot Options (F12) Page. What I can not gain access to is the Restore (F8) menus.

I did not know to make any sort of boot disk or boot repair disk so I do not have either of these and I do not know of anyone who is using windos 7 that could make me one to use. Also Dell puts the rstore on the hard drive so onlyhave a MS Works CD and a Drivers & Utilities CD l ran the diagnostics utility but forgot to plug in my computer so when it was almost done the battery must have died so will redo the test later as tired tonight as been up half the night with this issue. But for memory the first 6 of the 8 memories areas it was scanning tested fine. Will post an update later today when Iget chance to run the whole thing again!!

I know others have had this screen. Is there a solution as have spent the last day or so googling it and seems very mixed results depending on the user and their own case with this black screen w/cursor.Some have said bad hard drive (I HOPE NOT THE CASE FOR ME AT LEAST!!!) Some have said bad mother board. Some have said virus or malware Some have referenced a software update both Microsofts and also specific computer companies. So what can I do to get to my files at least to back them up that is providing the drive is OK! I do know from the boot menu my hard drive is showing in the boot menus. Does this mean that the drives OK but maybe a corrupted boot area or something?

View 9 Replies View Related

Black Screen At Boot With My Mouse Cursor

Oct 20, 2009

I have a problem when booting up Windows 7.

When I boot, I see the 4 particles, but after that, i get a black screen with my mouse cursor, but that's all.

If i wait for about 7 minutes, i get the login screen and everything works fine.

I haven't installed anything or done anything that could cause this.

Is this normal? I hope not because i hate waiting :P

I have read some other topics that seemed to be almost the same problem as mine. Some say you have to get a new videodriver. have done that, didn't

work. Restoring to a restore point didn't work either.

Any suggestions?

EDIT: Forgot to say, it is a dual boot (win xp/win 7) (maybe usefull information)

View 9 Replies View Related

Can't Boot - Black Screen And Blinking Cursor

Mar 20, 2012

I'm having regarding my Dell with Windows 7 x64. Initially I got the message "Loading PBR for descriptor 2... Done". That's all it said, and did not continue to boot. I researched the error message and found many users with similar problems that solved it by booting the Windows 7 dvd and running bootrec.exe from the command prompt, so I attempted this. I tried bootrec with the /fixmbr, /fixboot, and /rebuildbcd options. After trying to fix my problem with bootrec, the "loading pbr" message no longer appears, all I get is a blank screen with a blinking cursor after the BIOS. I'm not sure what the problem or solution is at this point. I'm not sure if I've made things better or worse. I tried running chkdsk /r but it won't run, complaining that the disk is write protected.   Edit: I just realized that System Recovery Options is showing "Operating system: Unknown on (Unknown) Local Disk"

View 3 Replies View Related

My Laptop Doesn't Boot - The Log In Screen Appears To Be Blank?

Dec 16, 2011

I just installed NFS the Run and Battlefield 3 on my windows 7 Dell XPS, the game showed me an error and asked me to download driver version 259.38 from the nvidia website, I did so and the game started working, but not properly. Anyway, so I restarted my laptop and after the 'starting windows' screen, it went blank, the blue log in screen never came (i could hear the tune though).Then i restored my system to a previous date (thereby uninstalling the new driver) and now the system is working but the game is showing the same error again

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved