Blank Screen With Blinking Cursor?
Jul 5, 2010
I recently dualbooted Linux Mint and Windows 7 on my laptop. Yesterday I removed the Linux partition without thinking, and forgetting about the GRUB bootloader. I'm at a stump now. When I try and turn on my computer, the Toshiba logo appears, then the screen goes blank with a blinking cursor. I searched the internet all of today and most of yesterday, all that did was tell me to do the bootsect /nt670 /fixmbr and all it's variations[CODE]
View 2 Replies
ADVERTISEMENT
Dec 8, 2012
two day ago i turned on my pc as usual. But it did not boot, instead i got a black screen with blinking cursor, so is there any way to make my pc recover from this issue.
I've tried the f8 , it has No effect I even re installed the os but it does not work.. It does all installation work asks for my name and pc name . Then it does the video and perfomance testing . Then it restarts and i again get the blank screen with blinking cursor.
View 2 Replies
View Related
May 14, 2012
I have a sony vaio vpceb11fm laptop. the moment i turn it on i get the vaio sign and then a black screen with a flashing cursor on the top left hand corner i tried f10 to recover the system but come across the same problem.
View 2 Replies
View Related
Nov 4, 2011
i have a lenovo thinkpad edge 14" running 64-bit windows 7 home premium. the laptop didn't come with any CD's, everything was pre-loaded on. all i get when i boot it is a black screen with a blinking cursor , when it boots all it shows is the thinkpad splash screen then straight to the blinking cursor. i have access to a lenovo x220 running the same (i.e. 64-bit Windows 7 home premium) however no CD drive, the edge 14" does have a cd drive. looked at multiple articles on seven forums but none of them help because i dont have a cd burner
View 6 Replies
View Related
Feb 12, 2013
I just made my first PC and after entering UEFI and choosing the CD drive as the boot disk I am led to a black screen with a blinking icon. Now I tried to boot from a USB, but this also led me to the black screen.
Specs:
Intel i5 3570k
ASUS P8Z77-V
WD 500GB
OCZ Vertex 3 120GB
EVGA GTX 670 FTW Edition
Rosewell 750w Bronze Certified
Lite-on CD drive
Zalman 2 Ball CPU Cooler
View 7 Replies
View Related
Jul 2, 2011
My computer would not get past the start up screen � it just froze at the Windows 7 logo. Prior to this, I had absolutely no problems. I shut it down one night and came to start it the next morning and it wouldn't load. I format the drive and tried to reinstall Windows 7. It seemed to load everything fine and got to the "Completing Install" part, then just flicked to a completely black screen with a blinking line in the top left-hand corner.I did read on one forum that perhaps it was a RAM issue, so I removed one stick and the process actually completed! I thought I had nailed it. After setting my computer back up and with everything working just fine, I put the RAM back in. On restart, it locked at the logo again, so I figured it was definitely bad RAM, HOWEVER!! Even with the RAM now removed, I cannot get Windows 7 to reinstall. I am still getting this awful black screen with a blinking cursor.
View 1 Replies
View Related
Dec 1, 2011
I'm trying to boot up this HP laptop that shows a black screen with a blinking cursor after the HP logo. I've tried using a windows 7 recovery disc to repair start up.I've restored the computer to an earlier date that it was working correctly. I've ran every test in the computer's built in diagnostics, and every single one has passed, and no errors in any part of the system were reported. Also, the computer will not start up in safe mode or anything like that.
View 8 Replies
View Related
Jun 26, 2011
for some reason I can't even get into windows 7, after I get pass the screen that says "asus" , my laptop brand, It goes into a black screen with a blinking cursor in the left hand corner like this:
I'm unable to do anything at that point, it just blinks. I can't even boot into safe mode now, the only think I'm able to get into is the Bios Setup Utility menus and Asus' express gate, which is just a media/internet/gaming/skype thing that doesn't allow .exe files to run...
This came factory installed so I don't have a windows 7 disc to help run fixes or anything.
View 8 Replies
View Related
Oct 24, 2012
Ok so recently I got a black screen with a blinking cursor on the top left. The computer starts up normally with the toshiba logo but then it goes to this black screen with a blinking cursor. I tried almost everything. I tried doing system startup repair, /fixboot /fixmbr, The "0" key, F8 doesnt work and so forth.I cant even reinstall windows 7 onto the computer because after it restarts to finish the installation it just goes back to the black screen with the blinking cursor on the top left. The computer is a Toshiba Satellite A205 - S5825 windows 7 32 bit.
View 3 Replies
View Related
Jan 22, 2012
Tech-savvy superior beings, I humbly come before you because my rig is having a fit. Whenever I start her up, I get as far as the splashscreen that reminds me which mobo I have, followed by a cursor blinking on a black field for eternity.
[code]...
Lovingly jumbled together based on my perusal of this very site. It has brought me much happiness until now. A thousand pardons if this problem has been resolved in another thread. I have been forced to look for solutions on a smart phone, which is trying my patience
View 6 Replies
View Related
Mar 20, 2012
I'm having regarding my Dell with Windows 7 x64. Initially I got the message "Loading PBR for descriptor 2... Done". That's all it said, and did not continue to boot. I researched the error message and found many users with similar problems that solved it by booting the Windows 7 dvd and running bootrec.exe from the command prompt, so I attempted this. I tried bootrec with the /fixmbr, /fixboot, and /rebuildbcd options. After trying to fix my problem with bootrec, the "loading pbr" message no longer appears, all I get is a blank screen with a blinking cursor after the BIOS. I'm not sure what the problem or solution is at this point. I'm not sure if I've made things better or worse. I tried running chkdsk /r but it won't run, complaining that the disk is write protected. Edit: I just realized that System Recovery Options is showing "Operating system: Unknown on (Unknown) Local Disk"
View 3 Replies
View Related
Mar 29, 2012
I have a gateway computer that is infected with a virus. I was able to load the computer in safe mode a couple of times before it no longer loaded login screen for my computer. Now when I cut the computer on there is only a black screen with a white blinking cursor. I have the avira rescue cd and have changed the seetings to boot straight from the cd rom but even after running the rescue disc the computer will not allow me to use the (f) function keys. When I press down on any of the (f) function keys there is a beeping sound but no action. I tried to use a windows reboot cd made from another computer but it does not load on the start up like the avira resue disk does.
View 1 Replies
View Related
Sep 6, 2011
Sometimes when I turn on my computer, the screen will turn on as usual, and there is like a cursor that blinks in the top left corner of the screen, again, as usual. However, it will sometimes stop, and stay on this screen for upwards of a minute or more. The laptop sounds like it's still working, as the fan is going pretty fast and everything sounds like it's spinning, however it doesn't show anything on the screen. After around the minute duration, the screen will go black and the normal boot up process is proceeded with. From what I've read of other people, they can't even get past this screen, which is why I think my problem is slightly different, or the same, just not as severe. Does my problem also sound like it's the MBR, as indicated by other people's questions on the Internet?
If so, is there any easy way to repair it without having to use a windows 7 disc, as I have a laptop and didn't get a disc with it...
View 3 Replies
View Related
Jan 15, 2013
Today I tried to boot up my laptop but I am stuck at a blinking cursor on a black screen. To make matters work my keyboard doesn't work either so I can't use F2 or F12 before it boots to the black screen.
View 9 Replies
View Related
Nov 28, 2011
I have purchased an OEM pc yesterday and I installed windows 7 x64 on it. Everything went great with installation. No errors or anything. But when I restarted my computer, after the motherboard splash screen a black screen with a blinking cursor top left appears and windows doesn't boot. But sometimes, especially when I wait a few minutes to turn it on it boots normally till I shut it down. It is so random.
My specs are:
Motherboard: gigabyte 970a d-3
Memory: CORSAIR 4GB VENGEANCE DDR3 1600MHZ CL9(*2)
CPU: AMD phenom ii x6 1100t black edition 3 .3ghz
GPU: Sapphire hd 6870 1GHZ
PSU:700watt
OS: Windows 7 Ultimate x64
View 18 Replies
View Related
Jun 21, 2012
I have a Dell Inspiron, not always but sometimes on start up it restarts to a black screen with a white cursor. Safe mode does work.I don't know why it sometimes does this or what makes it stop. I have tried just letting it try to load up for as long as an hour with no change, sometimes restarting has fixed it but sometimes (like now, it has done nothing no matter how many times I've tried).
View 5 Replies
View Related
Dec 31, 2010
Everything shows up fine until the welcome screen after that it normally used to fade to the desktop but now it goes blank. The screen in Black with only the mouse pointer. Its not hung, i can move the mouse pointer. Then after a minute or so it advances to the desktop. Everything on the desktop loads up in less than 5s. The PC runs fine, it is really fast as there are only a few programs, but only boots slow. My total boot time is about 3-5 min. I think it should be like in a minute or so.I have not tweaked much with the system but have installed a few programs like MS office, Nero, Acrobat and Photoshop. These are the only heavy programs in the PC right now. The only games on the PC are AC1 and AC2. I have uninstalled my graphic driver and reinstalled. I already minimized the programs in the msconfig>startup to the minimum. I have run ccleaner, spybot s&d, Antimalware and i also have a trial copy of Kaspersky AV (upgrading later to 1-year license). there are no peripherals attached during boot except the USB keyboard and mouse. A printer is attached too but is most of the time turned off.
View 11 Replies
View Related
Jul 6, 2012
After leaving my comp on overnight i wake up to non-responding programs, i shut down manually and then as i restart this happens. 5minute lag on welcome screen and then it turns blue with a moveable cursor. i have used system restore and created a new user but neither works. i can run perfectly on safe mode.
View 6 Replies
View Related
Dec 22, 2009
Just today I upgraded from Vista to Windows 7. This was a problem I had a few months ago with Vista on this same laptop, and I was hoping it would be fixed with Windows 7, but apparently it hasn't.
I just finished the installation and final reboot and everything, and I logged in, only to have the Welcome spinning circle on the screen for about 30-45 seconds, and then a blank screen with a moving cursor, but nothing else. After using Ctrl-Alt-Del to log out, I logged back in, and this time after 25-30 seconds of the Welcome spinning circle it logged me in.
Like I said, this was an occasional problem I had with Vista as well, but if possible, now that I'm using Windows 7 I'd like for it to not be a problem at all.
I'm running a 5 month old HP G60 laptop. During the upgrade process today I had to update my BIOS and everything else, so I think those should be fine. I just thought this would be the best place to ask if others have had the same problems and if so, what they did to fix it.
View 1 Replies
View Related
Aug 11, 2011
my son has a toashiba satellite pro L450D-12x it goes past set up screen then to a blank screen (in black ) with a flashing line in the left corner how can i get it to load properley? before it did this it said media cable fail or something like that and i restored bios back to restore settings and it was also turning itsself off now and again.
View 12 Replies
View Related
Sep 4, 2011
When computer starts is says windows is starting and then just get blank screen with cursor.
View 1 Replies
View Related
Sep 30, 2012
After I turn on my laptop Dell starts and it says her resuming windows and then goes to a blank screen with my cursor. I removed the battery and held the power button but don't know what else to do. I don't have a restore disk. I'm running windows 7.
View 6 Replies
View Related
May 8, 2011
I have a HP netbook running Windows 7 Starter edition that I only had for about 2 months anyways this morning I started it up and got the HP logo screen briefly and then a black screen with a white cursor in the top left hand corner. I can get to the BIOS menu and I have tried restoring to default but that didn't do anything. I then unplugged ac adapter and battery and help power button down for a min. and then put battery and ac adapter back in and started it.
View 1 Replies
View Related
Feb 11, 2012
I was all good working on my computer when I decided to restart my computer because "rocketdock" (a dock program) didn't open a folder and gave me the "open with" dialog instead.
Background:- I've installed a lot of updates recently, including SP1. The windows is customized i.e. some files are edited. I used tune up registry cleaner, which caused a problem in Chrome, so I used a command found on the Internet, it made tons of errors (which was mentioned by the one who suggested the command) and the computer CPU was fully loaded, the command was replacing files, or something like that. When I remember the command I'll post.
PS: "Ctrl+Alt+Delete", "Ctrl+Shift+Esc", and "Ctrl+L" don't do anything. PS2: Safe Mode loads into the same screen.
View 3 Replies
View Related
Apr 25, 2012
I thought I would start to describe this issue by telling you what I screwed up on and how I made it happen: I accidentally set my backup drive as my primary (set the partition as active in CMD, it has no installation on it). Then when I went to boot my device, it would tell me that Windows was not installed. I put my C: (main, primary) partition as my default again (with CMD on installation disk) and I was able to get Windows to boot. Then I messed with the MBR to try to fix it and now this happens:
Current problem: When I boot Windows, it give me the old Vista-looking boot scroller (Not "starting windows" with the traditional animation). This animation only lasts for about 3 seconds, then it goes to a black screen with the cursor. That is all. Nothing loads, yet no error message. I tried using a few bootrec commands to fix it using the installation CD's CMD but no luck.
View 8 Replies
View Related
Mar 19, 2012
have Windows 7 Home edition on a HP dv4 series laptop. Couple of days back I was browsing through a website suddenly the the windows was shutdown. I assumed it was some virus workWhen I try to restart windows it is taking me upto the HP boot options then I get a blank screen with a cursor at the top left corner.The following did not work,1) Booting via the recovery disk2) Booting via recovery hard disk3) I created a USB boot with Ubuntu and even the USB is not getting detected
View 1 Replies
View Related
Oct 3, 2009
I've been using my laptop for a while now and had a friend install Windows 7 onto it (because i'm quite rubbish with this sort of thing) and everything has been going great until a few weeks ago.
I loaded it up one day and everything is going fine until it reaches the part where it's supposed to load the log on screen. Instead of a log on screen all i am getting is a black screen with the cursor. Now i can't give you specs to my computer or anything of the like because i simply don't have access to it but i can give as much aid as possible to help find the problem.
One of the things that happens is that when the black screen & cursor appears if i move the mouse or push any buttons the screen goes VERY dim as if i've put it into a lower power mode or i've taken out the power cable. If i push the power button to turn it off even if it's just a tap on the button the screen will go off immediatly even if the laptop is still running.
One of the green lights that i believe is showing if the hard drive is busy or not flashes during the process but after a minute or so of the black screen it'll stop flashing altogether.
I've tried all three safe modes with all the same results, F8 to system repair has given me no love with startup repair finding NOTHING wrong, memory check running through the process only for the same thing to happen and system restore has no restore points to go to.
I've looked for answers in several places and some say i have to use sticky keys to get the screen to come on but the problem is that as of last nights use i turned sticky keys off for a few minutes so i could play a game and forgot to turn them back on afterwards. I've taken a look around the net and can't find a fix to my problem. Reinstall simply is not an option under my current circumstances so i really need a favourable reply.
View 7 Replies
View Related
Oct 28, 2011
Formatted Windows 7 loads shows Win 7 Logo and Screen blank with cursor
I have an Acer laptop 4551, got hit by nasty viruses and on top no restore intact.
I formatted the hard drive which gave me an error 83% and stopped. Today I turned on laptop to install fresh genuine Windows 7, I popped in the DVD and done everything in BIOS selected Boot from CD. Everything was Ok I hit enter to Continue then comes the Windows 7 logo and after that a blank black screen with Cursor, that's it! I done that some 5/6 times but no luck.
View 1 Replies
View Related
Oct 1, 2012
My old HDD was fried so I decided to use my External HDD to boot off. Afterreformatting the drive I have installed it into my laptop and have attempted to install Windows 7 64bit and its all going great until after the starting windows screen and then it just turns black with the cursor. What I have tried so far....- I have reset the BIOS to defalt-Cleared the CMOS- Checked the RAM (even left 1 2gig stick in and tried that?)
View 1 Replies
View Related
Mar 4, 2011
About a month and a half a go my laptop was infected with 2 trojan viruses and ever since I haven't been able to start it up as it stays on a black screen with a blinking cursor after the toshiba splash screen. I am able to use my computer by booting with Hiren's boot cd and have since cleaned up my computer and gotten rid of any viruses..but have to continue booting via disc and it is getting sickening to do so.
View 3 Replies
View Related
Nov 3, 2011
I built my own computer last year. The computer boots up just fine but before it bios screen comes up there is a blinking cursor that runs for almost 20 seconds and then bios kicks in and everything goes on normally form there.
View 3 Replies
View Related
