Clean Install Of Windows 7: Blank Screen With Cursor After Starting Windows 7?

Oct 1, 2012

My old HDD was fried so I decided to use my External HDD to boot off. Afterreformatting the drive I have installed it into my laptop and have attempted to install Windows 7 64bit and its all going great until after the starting windows screen and then it just turns black with the cursor. What I have tried so far....- I have reset the BIOS to defalt-Cleared the CMOS- Checked the RAM (even left 1 2gig stick in and tried that?)

View 1 Replies


ADVERTISEMENT

Starting Up To Blank Screen With White Cursor?

May 8, 2011

I have a HP netbook running Windows 7 Starter edition that I only had for about 2 months anyways this morning I started it up and got the HP logo screen briefly and then a black screen with a white cursor in the top left hand corner. I can get to the BIOS menu and I have tried restoring to default but that didn't do anything. I then unplugged ac adapter and battery and help power button down for a min. and then put battery and ac adapter back in and started it.

View 1 Replies View Related

Clean Windows 7 Install-loading Files To Scrolling Progress Bar To Blank Desktop W/cursor?

May 5, 2010

When I try to do a clean install of Windows 7 I get the loading files white progress bar you normally get during an installation, it then goes directly to the scrolling progress bar that would normally appear before a Windows startup, and then goes to a blank Windows 7 desktop with only a cursor (that I can move).I have a computer with the following specs:[CODE]I have tried to install with every version I can get my hands on, both 32 and 64 bit. None of them are upgrade versions. I've tried installing on a fresh WD Raptor and an Intel G25 SSD. All other drives have been disconnected. I've moved my memory around and tried with one stick. My mainboard has the latest official BIOS, although there is a new beta.

I ran the Windows 7 compatibility test and didn't see anything that would cause this problem.I have searched the internet and have not been able to find a solution sonstalling Windows XP has never been a problem, just Windows 7, always with the same problem.This is one of the few times when I have not been able to look around a find an existing answer to a problem and I am stumped.

View 2 Replies View Related

Blank Screen After Clean Install Of Windows 7?

Mar 28, 2011

I'm trying to install Windows 7 on my PC again, and came to a blank screen after the reboot. I have the PC hooked up to a TV using the S-Video output on my graphics card, and suspect that win 7 is using the DVI port instead. There is no way at the moment that I can use the DVI port because I don't have a monitor that supports it.

is there a way around this so I can use the S-video output for the rest of the installation?

View 3 Replies View Related

Windows 7 Clean Install Blank Screen?

Feb 23, 2012

I'm trying to install Windows 7 on a new SSD, my old hard drive crashed. My video card is an onboard ATI Radeon HD 4250. Initial setup works fine, but when the computer reboots it comes back up blank. I'm already running two monitors, one VGA and one DVI, and safe mode doesn't work either, I've tried booting from a flash drive and a dvd with exactly the same results.

View 9 Replies View Related

Clean Install Hangs At Starting Windows Screen

Nov 30, 2009

I am trying to do a clean install of Windows 7 64 bit. It hangs at the starting windows screen and does nothing more. No HDD activity or anything. Let it sit all night like that to see if it would go any further, but it didn't. Anyone else have this experience, and if so, what did you do to make it work?

View 6 Replies View Related

Windows 7 Clean Install Hangs At Starting Windows Screen?

Sep 19, 2012

Windows 7 clean install hangs at starting windows screen

View 4 Replies View Related

Windows 7 Clean Install Hangs At Starting Windows Screen

Dec 28, 2012

I recently got a new asus laptop and some of my programs aren't compatible with windows 8. So i'm trying to downgrade to windows 7 because i never liked w8 in the first place. So when i boot from CD (64-bit windows 7 ultimate) it will install without any problems, but when it gets to the 'starting windows' screen the animation freezes and it just stays there.

View 49 Replies View Related

Blank/Black Screen Problem During Clean Install

Nov 21, 2009

After few seconds start screen disappears and is repalced by a Black/Blank screen with only mouse pointer. Mouser is working but there is nothing on screen to click on. Keyboard is working fine too. (checked with NumLock and Caps Lock keys)

Nothing happends beyond this point even after rebooting and repeating above process.

Searched internet for above problem symptoms. Looks like Windows 7 decides default monitor on its own. There is no way to decide it yourself duing installation.

My motherboard has two ports. 1 DVI and 1 analog. I have only 1 Analog monitor and do not plan on buying/having another monitor.

DVI to analog convertor is not available in market to test display from DVI port.

Could somebody please help?

View 8 Replies View Related

5min Delay On Welcome Screen, Then Blank Screen With Cursor (windows 7)

Jul 6, 2012

After leaving my comp on overnight i wake up to non-responding programs, i shut down manually and then as i restart this happens. 5minute lag on welcome screen and then it turns blue with a moveable cursor. i have used system restore and created a new user but neither works. i can run perfectly on safe mode.

View 6 Replies View Related

Windows 7 Blank Screen With Cursor?

Sep 4, 2011

When computer starts is says windows is starting and then just get blank screen with cursor.

View 1 Replies View Related

Blank Screen With Cursor On Windows 7?

Sep 30, 2012

After I turn on my laptop Dell starts and it says her resuming windows and then goes to a blank screen with my cursor. I removed the battery and held the power button but don't know what else to do. I don't have a restore disk. I'm running windows 7.

View 6 Replies View Related

Blank Screen With Blinking Cursor Windows 7

Dec 8, 2012

two day ago i turned on my pc as usual. But it did not boot, instead i got a black screen with blinking cursor, so is there any way to make my pc recover from this issue.

I've tried the f8 , it has No effect I even re installed the os but it does not work.. It does all installation work asks for my name and pc name . Then it does the video and perfomance testing . Then it restarts and i again get the blank screen with blinking cursor.

View 2 Replies View Related

Blank Screen After Starting Windows 7?

Aug 13, 2012

I seem to have a odd issue with my laptop. Sometimes when i boot into windows there would be a blank screen with a mouse cursor after the starting windows screen. I would have to wait for approximately 5 minutes for it to show up my logon screen. I've been having this issue since the start of the year and have attempted to solve it but they have been unsuccessful. Things i've tried:Reformat Windows (Did it 4 times)Purchasing a SSDReduced the start-up items(barely any)?

View 14 Replies View Related

Windows (7 Ultimate X64) Boots Into A Blank Screen With A Cursor

Feb 11, 2012

I was all good working on my computer when I decided to restart my computer because "rocketdock" (a dock program) didn't open a folder and gave me the "open with" dialog instead.

Background:- I've installed a lot of updates recently, including SP1. The windows is customized i.e. some files are edited. I used tune up registry cleaner, which caused a problem in Chrome, so I used a command found on the Internet, it made tons of errors (which was mentioned by the one who suggested the command) and the computer CPU was fully loaded, the command was replacing files, or something like that. When I remember the command I'll post.

PS: "Ctrl+Alt+Delete", "Ctrl+Shift+Esc", and "Ctrl+L" don't do anything. PS2: Safe Mode loads into the same screen.

View 3 Replies View Related

Windows Wont Boot Up - Blank Screen With Cursor

Apr 25, 2012

I thought I would start to describe this issue by telling you what I screwed up on and how I made it happen: I accidentally set my backup drive as my primary (set the partition as active in CMD, it has no installation on it). Then when I went to boot my device, it would tell me that Windows was not installed. I put my C: (main, primary) partition as my default again (with CMD on installation disk) and I was able to get Windows to boot. Then I messed with the MBR to try to fix it and now this happens:

Current problem: When I boot Windows, it give me the old Vista-looking boot scroller (Not "starting windows" with the traditional animation). This animation only lasts for about 3 seconds, then it goes to a black screen with the cursor. That is all. Nothing loads, yet no error message. I tried using a few bootrec commands to fix it using the installation CD's CMD but no luck.

View 8 Replies View Related

Windows 7 Clean Install: Freezes On "Starting Windows" Screen

Sep 29, 2010

It all started when I decided to upgrade to Windows 7 x64 from my Vista x64. I had nothing of importance on the computer, so why not do a clean install and start fresh? It installed fine and rebooted several times until the computer had the Setup Is Checking Video Performance, it froze on that screen. I had to reboot it and now here is my current issue.....

Installation is going fine, goes to Completing Installation and then reboots..Then shows a black screen with blinking cursor for 5 minutes. Then restarts itself and has Windows Recovery Error. I chose Start Windows Normally and it goes to Starting Windows screen with the logo. I've tried letting it sit there for 30 minutes until it restarts itself and states..Windows failed to start. A recent software or hardware change may be the cause..etc etc..

So basically it's just a constant cycle of Starting Windows screen and Windows Recovery Error screen Unless I press f10 to go into the Boot Options.

Gateway FX4710
Intel Core 2 Quad Q9300 / 2.5 GHz
6GB Ram / 667.0 MHz
NVIDIA GeForce 9800 GT / 512.0 MB

View 9 Replies View Related

Windows 7 Not Booting - Blank Screen With A Cursor At The Top Left Corner?

Mar 19, 2012

have Windows 7 Home edition on a HP dv4 series laptop. Couple of days back I was browsing through a website suddenly the the windows was shutdown. I assumed it was some virus workWhen I try to restart windows it is taking me upto the HP boot options then I get a blank screen with a cursor at the top left corner.The following did not work,1) Booting via the recovery disk2) Booting via recovery hard disk3) I created a USB boot with Ubuntu and even the USB is not getting detected

View 1 Replies View Related

Computer Goes To A Black Screen With A Cursor After It Says Windows Is Starting?

Dec 8, 2012

what could be wrong with my computer i hit the power button and it start and it says start windows normally but when i click on it after is says windows is starting it goes to a black screen with the cursor i can move the cursor but nothing else. it goes to the black screen before it will let me even log on to my computer

View 1 Replies View Related

Formatted Windows 7 Loads Shows Windows 7 Logo And Screen Blank With Cursor

Oct 28, 2011

Formatted Windows 7 loads shows Win 7 Logo and Screen blank with cursor

I have an Acer laptop 4551, got hit by nasty viruses and on top no restore intact.
I formatted the hard drive which gave me an error 83% and stopped. Today I turned on laptop to install fresh genuine Windows 7, I popped in the DVD and done everything in BIOS selected Boot from CD. Everything was Ok I hit enter to Continue then comes the Windows 7 logo and after that a blank black screen with Cursor, that's it! I done that some 5/6 times but no luck.

View 1 Replies View Related

Startup Delay After Login Screen - Blank Screen With Cursor?

Dec 31, 2010

Everything shows up fine until the welcome screen after that it normally used to fade to the desktop but now it goes blank. The screen in Black with only the mouse pointer. Its not hung, i can move the mouse pointer. Then after a minute or so it advances to the desktop. Everything on the desktop loads up in less than 5s. The PC runs fine, it is really fast as there are only a few programs, but only boots slow. My total boot time is about 3-5 min. I think it should be like in a minute or so.I have not tweaked much with the system but have installed a few programs like MS office, Nero, Acrobat and Photoshop. These are the only heavy programs in the PC right now. The only games on the PC are AC1 and AC2. I have uninstalled my graphic driver and reinstalled. I already minimized the programs in the msconfig>startup to the minimum. I have run ccleaner, spybot s&d, Antimalware and i also have a trial copy of Kaspersky AV (upgrading later to 1-year license). there are no peripherals attached during boot except the USB keyboard and mouse. A printer is attached too but is most of the time turned off.

View 11 Replies View Related

Goes To Blank Screen With Cursor After Log-in

Dec 22, 2009

Just today I upgraded from Vista to Windows 7. This was a problem I had a few months ago with Vista on this same laptop, and I was hoping it would be fixed with Windows 7, but apparently it hasn't.

I just finished the installation and final reboot and everything, and I logged in, only to have the Welcome spinning circle on the screen for about 30-45 seconds, and then a blank screen with a moving cursor, but nothing else. After using Ctrl-Alt-Del to log out, I logged back in, and this time after 25-30 seconds of the Welcome spinning circle it logged me in.

Like I said, this was an occasional problem I had with Vista as well, but if possible, now that I'm using Windows 7 I'd like for it to not be a problem at all.

I'm running a 5 month old HP G60 laptop. During the upgrade process today I had to update my BIOS and everything else, so I think those should be fine. I just thought this would be the best place to ask if others have had the same problems and if so, what they did to fix it.

View 1 Replies View Related

Blank Screen And Flashing Cursor?

Aug 11, 2011

my son has a toashiba satellite pro L450D-12x it goes past set up screen then to a blank screen (in black ) with a flashing line in the left corner how can i get it to load properley? before it did this it said media cable fail or something like that and i restored bios back to restore settings and it was also turning itsself off now and again.

View 12 Replies View Related

Blank Screen With Blinking Cursor?

Jul 5, 2010

I recently dualbooted Linux Mint and Windows 7 on my laptop. Yesterday I removed the Linux partition without thinking, and forgetting about the GRUB bootloader. I'm at a stump now. When I try and turn on my computer, the Toshiba logo appears, then the screen goes blank with a blinking cursor. I searched the internet all of today and most of yesterday, all that did was tell me to do the bootsect /nt670 /fixmbr and all it's variations[CODE]

View 2 Replies View Related

Windows 7 Hangs At Starting Windows (After Clean Install)

Aug 12, 2012

So I just did a new custom built comp and got Windows 7 Professional for it. I burnt it to a DVD from the ISO I got from the Microsoft Store. It would freeze at the Starting Windows screen just after the 4 dots converged into the logo.

Things I've tried:

-One stick of RAM
-Installed on same HDD on another computer rig (Booted fine until I brought it back to my new rig. Then it wouldn't boot on neither)
-Memtest
-USB Boot installer

I also have all the unneeded peripherals out.

Rig:
Z68XP-UD3 (Using onboard VGA until 7 is working then its a Asus GTX 560 Ti)
1 4 GB Corsair Vengence 1600 MHZ. (Took the second out)
I5 2500K 3.3 GHz(Stock)
600W OCZ MODX Stream Pro
1 TB Western Digital Black HDD

View 1 Replies View Related

Blank Desktop Screen After Clean Up Virus?

Aug 25, 2012

my laptop got totally affected by different malwares,trojans..etc. So i used avira to scan my system and removed all the viruses it showed...but after rebooting a black desktop appeared with only cursor present and no icons n no wallpapers....cursor only moves no right-click..i did some searching on how to get my desktop screen back...n i tried Ctrl-Alt-Del..then new task n typing explorer.exe....an error mssg shows up saying u dont have permission..

View 2 Replies View Related

Blank Screen With Cursor But No Log On Screen

Oct 3, 2009

I've been using my laptop for a while now and had a friend install Windows 7 onto it (because i'm quite rubbish with this sort of thing) and everything has been going great until a few weeks ago.

I loaded it up one day and everything is going fine until it reaches the part where it's supposed to load the log on screen. Instead of a log on screen all i am getting is a black screen with the cursor. Now i can't give you specs to my computer or anything of the like because i simply don't have access to it but i can give as much aid as possible to help find the problem.

One of the things that happens is that when the black screen & cursor appears if i move the mouse or push any buttons the screen goes VERY dim as if i've put it into a lower power mode or i've taken out the power cable. If i push the power button to turn it off even if it's just a tap on the button the screen will go off immediatly even if the laptop is still running.


One of the green lights that i believe is showing if the hard drive is busy or not flashes during the process but after a minute or so of the black screen it'll stop flashing altogether.

I've tried all three safe modes with all the same results, F8 to system repair has given me no love with startup repair finding NOTHING wrong, memory check running through the process only for the same thing to happen and system restore has no restore points to go to.

I've looked for answers in several places and some say i have to use sticky keys to get the screen to come on but the problem is that as of last nights use i turned sticky keys off for a few minutes so i could play a game and forgot to turn them back on afterwards. I've taken a look around the net and can't find a fix to my problem. Reinstall simply is not an option under my current circumstances so i really need a favourable reply.

View 7 Replies View Related

Can't Install Windows 7 Getting Black Screen With Cursor

Jul 26, 2010

I'm having some problems with my PC, and suspect it MAY be related to Windows 7. Yesterday I was using my PC and it started crashing. It would either freeze, show me a blue screen error and reboot, or just flat out reboot. I believe the problem is one of three possible things: Windows 7 problems, bad motherboard, bad CPU. I've been using this PC in this configuration with no changes since November, 2009 when I upgraded my PC, and haven't had any problems with it until recently. I have an upgrade disc, and I always do the Clean Install option. I tested it with different video card & sound card configurations, and with a single memory stick in different ports, etc. I've also downloaded and ran Seagate's SeaTools program to do a hard drive check and it came out clean. No matter what hardware configuration I tried, it still crashed. It would work for about 5 minutes, then crash. Strange thing is, it would not crash if it were in safe mode, which led me to believe it was a problem with Windows or possibly some drivers.I tried to do a system restore and, as usual, it didn't help at all. I finally decided to just try and wipe the hard drive and do a clean install. Every time I try to install Windows 7, it goes through the install process until it gets to the last step, reboots, then when the progress bar is about 3/4 of the way through, I just get a black screen with my mouse cursor. I can move the cursor, but can't do anything else. Hitting CTRL+ALT+DEL does nothing. i've tried installing it at least 4 times and always get the same result. I also tried installing the 32-bit version of Windows 7, same thing. When I install an older copy of Windows XP Pro that I have, it will install but that's about it. It won't let me install my video drivers or do much else with it.

This setup has been working without issue since November, 2009. I've not even opened the case in at least 6 months, and don�t install a ton of new programs. Haven't installed anything in the last 2 weeks. The main reason that I suspect a possible problem with the motherboard is that I have had a problem where, when booting up the PC, I get a very quiet tone during the POST test, then I get the usual *beep* and it boots up. There was a problem for a while where it wouldn't boot up, and I would just shut it down & restart it and it worked fine. More often than not, it would boot and work with no problem, so I didn't bother doing a warranty return on it. I've been looking through the forums here and I've tried recovering the boot record as outlined here: MBR - Restore Windows 7 Master Boot Record - Windows 7 Forums

View 3 Replies View Related

Can't Install Windows 7, Getting Black Screen With Cursor

Jul 26, 2010

suspect it MAY be related to Windows 7. Yesterday I was using my PC and it started crashing. It would either freeze, show me a blue screen error and reboot, or just flat out reboot. I believe the problem is one of three possible things: Windows 7 problems, bad motherboard, bad CPU.

I�ve been using this PC in this configuration with no changes since November, 2009 when I upgraded my PC, and haven�t had any problems with it until recently. I have an upgrade disc, and I always do the �Clean Install� option. I tested it with different video card & sound card configurations, and with a single memory stick in different ports, etc. I�ve also downloaded and ran Seagate�s SeaTools program to do a hard drive check and it came out clean. No matter what hardware configuration I tried, it still crashed. It would work for about 5 minutes, then crash. Strange thing is, it would not crash if it were in safe mode, which led me to believe it was a problem with Windows or possibly some drivers.

I tried to do a system restore and, as usual, it didn�t help at all. I finally decided to just try and wipe the hard drive and do a clean install. Every time I try to install Windows 7, it goes through the install process until it gets to the last step, reboots, then when the progress bar is about 3/4 of the way through, I just get a black screen with my mouse cursor. I can move the cursor, but can�t do anything else. Hitting CTRL+ALT+DEL does nothing. I�ve tried installing it at least 4 times and always get the same result. I also tried installing the 32-bit version of Windows 7, same thing.When I install an older copy of Windows XP Pro that I have, it will install but thats about it. It wont let me install my video drivers or do much else with it.

Heres my PC info:
Motherboard: MSI NF750-G55
CPU: AMD Phenom II X2 550 Black Edition
Memory: 4GB (2 x 2GB) G. Skill DDR3 1600 SDRAM
Hard Drives: 1 TB Seagate & 350GB Western Digital
Power Supply: Cooler Master 500W

This setup has been working without issue since November, 2009. I�ve not even opened the case in at least 6 months, and dont install a ton of new programs. Havent installed anything in the last 2 weeks. The main reason that I suspect a possible problem with the motherboard is that I have had a problem where, when booting up the PC, I get a very quiet tone during the POST test, then I get the usual *beep* and it boots up. There was a problem for a while where it wouldn�t boot up, and I would just shut it down & restart it and it worked fine. More often than not, it would boot and work with no problem, so I didn�t bother doing a warranty return on it.

View 9 Replies View Related

Stuck On 'Starting Windows' Screen During Install

Dec 26, 2012

I recently purchased a Dell XPS 15 (l521x) that came with Windows 8. The system boots from the hard drive through UEFI by default, so I think the hard drive is already GPT. I am attempting to install Windows 7 from a UEFI bootable USB. The system goes through the 'copying files' phase and then goes to the Starting Windows screen. As the colored dots of the Windows logo are circling, the system freezes. Can someone help me fix this problem? The following are the steps I took in order to install Windows 7:

- Formatted a brand new 4GB USB drive to FAT32
- Downloaded Windows 7 ISO (I have a key)
- Extracted ISO files to USB
- Made adjustments so that USB is UEFI bootable (efi/boot/bootx64.efi)
- In BIOS, set SATA Operation to AHCI and disabled Secure Boot
- Select USB drive from UEFI boot menu

View 9 Replies View Related

Install Hangs On Starting Windows Screen

Nov 17, 2009

When I run the Windows 7 Home Premium OEM disc I get past "loading files" and then freeze on "starting windows". I see 4 little colored balls in the center of the screen (guessing the start of the MSFT logo) and then everything freezes.

Here's what I've got:

Monitor: Samsung T260HD 25.5in Rose/Black LCD w/ATSC

HDD: 2 x Seagate 1.5TB Serial ATA HD 7200/32MB/SATA-3G

Memory: Corsair Dominator 6144MB PC12800 DDR3 1600MHz (3x2)

DVD: LG 22X DVDRW SATA

Motherboard: ASUS P6TD Deluxe Intel X58 Socket LGA1366 MB

Power Supply: Corsair 950w 80 Plus Power Supply

GPU: 5850 is backordered, so am using an old Nvidia 6600 GT to attempt to install Windows - connected to monitor with DVI cable

OS: Windows 7 Home Premium OEM

I've done lots of research and tried:

1. Using a PS2 keyboard/mouse
2. Disabling USB in bios
3. Disabling just about everything else in bios
4. Tried w/ 2MB, 4MB and 6MB ram

Any help or suggestions would be greatly appreciated.

View 33 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved