Windows 7 Clean Install: Freezes On "Starting Windows" Screen
Sep 29, 2010
It all started when I decided to upgrade to Windows 7 x64 from my Vista x64. I had nothing of importance on the computer, so why not do a clean install and start fresh? It installed fine and rebooted several times until the computer had the Setup Is Checking Video Performance, it froze on that screen. I had to reboot it and now here is my current issue.....
Installation is going fine, goes to Completing Installation and then reboots..Then shows a black screen with blinking cursor for 5 minutes. Then restarts itself and has Windows Recovery Error. I chose Start Windows Normally and it goes to Starting Windows screen with the logo. I've tried letting it sit there for 30 minutes until it restarts itself and states..Windows failed to start. A recent software or hardware change may be the cause..etc etc..
So basically it's just a constant cycle of Starting Windows screen and Windows Recovery Error screen Unless I press f10 to go into the Boot Options.
Gateway FX4710
Intel Core 2 Quad Q9300 / 2.5 GHz
6GB Ram / 667.0 MHz
NVIDIA GeForce 9800 GT / 512.0 MB
View 9 Replies
ADVERTISEMENT
Nov 30, 2009
I am trying to do a clean install of Windows 7 64 bit. It hangs at the starting windows screen and does nothing more. No HDD activity or anything. Let it sit all night like that to see if it would go any further, but it didn't. Anyone else have this experience, and if so, what did you do to make it work?
View 6 Replies
View Related
Jan 6, 2010
After recently building a custom PC, I am doing a clean install of Windows 7 (64 bit) and all goes well through the installation process (loading, expanding files, etc) except when after the 2nd restart when it starts up for the first time. It freezes or hangs on the black “starting windows” screen (the one with the new colored windows logo).
I have tried installation a number of times, including with a bare bones configuration (2 Gb RAM, 1 HDD, 1 DVD Drive, GPU, and all other peripherals disconnected) and still the same thing happens. I have also tried the process using the VGA cable instead of the DVI.
I was able to successfully install XP after failing to install Win7, so I don't think my HDD is bad. I am also using a PS/2 Keyboard
System:
CPU: Intel Core 2 Quad (Q9650) 3Ghz/1333Mhz/12MB
MBoard: Asus P5K-E
GPU: Sapphire HD 2600XT
HDD: 2 x WD 640 Gb 7200/32MB/SATA 3.0Gb/s (Caviar Black WD6401AALS)
RAM: Mushkin 4Gb DDR2 SDRAM (2 x 2Gb)
PSU: Antec NeoPower HE550w (ATX 12v)
OS: Windows 7 Ultimate (64 bit) OEM system builder pack
All components were purchased new from Newegg. I also have some peripherals: 2 DVD drives, Multi card reader, extra USB, firewire ports, wireless LAN card (although I disconnected those for the initial install attempt).
Any help or advice would be greatly appreciated. I am really at a loss to figure this one out. Could it be something to do with my video card driver? (Do I need to install that in the BIOS?)--I can see everything fine on my monitor though.
View 3 Replies
View Related
Oct 1, 2012
My old HDD was fried so I decided to use my External HDD to boot off. Afterreformatting the drive I have installed it into my laptop and have attempted to install Windows 7 64bit and its all going great until after the starting windows screen and then it just turns black with the cursor. What I have tried so far....- I have reset the BIOS to defalt-Cleared the CMOS- Checked the RAM (even left 1 2gig stick in and tried that?)
View 1 Replies
View Related
Sep 19, 2012
Windows 7 clean install hangs at starting windows screen
View 4 Replies
View Related
Dec 28, 2012
I recently got a new asus laptop and some of my programs aren't compatible with windows 8. So i'm trying to downgrade to windows 7 because i never liked w8 in the first place. So when i boot from CD (64-bit windows 7 ultimate) it will install without any problems, but when it gets to the 'starting windows' screen the animation freezes and it just stays there.
View 49 Replies
View Related
Sep 26, 2012
Windows 7 hangs up on start up and after about 10 minutes goes to password. Once the password has been entered it goes to Welcome. the Green circle to the left of the W rotates and then stops.
View 1 Replies
View Related
Jun 12, 2009
A while ago i dual booted windows 7 onto my vista running laptop and it works perfectly. It is a huge improvement on vista, it is faster, better designed and its new features are very useful. Because of this success I know am trying to dual boot it onto my xp running desktop. Unfortunately it doesn't seem to like it.
I have used the same technique that i did on my laptop to install it. I have burnt the iso file onto a disk and run that disk while the computer is running. Checked for online updates and done a clean install. The installation works fine and quite quickly until it comes to the first restart. It restarts and I select "windows setup" on the bios screen as apposed to "an earlier version of windows" which is my xp partition.
It then changes to the starting windows screen that happens just like on my laptop, except the windows logo never materializes and it stays as a black screen with the words "starting windows" on it. i have left the computer on overnight and no change. I have tried reinstalling several times with no luck, both using the same method as before and booting from the disk at startup. Although when I boot from the disk it just skips straight to the same frozen windows startup screen.
I have downloaded the windows 7 adviser software but the program cant seem to make its mind up. Sometimes it announces that my graphics card cant run windows 7 aero and sometimes its fine. I have checked the windows 7 specs and my graphics card appears to meet all the requirements, both dedicated memory and direct x 9 support.
Here are my pc specs:
Dell dimension 5150
XP professional sp3
3ghz intel pentium 4
5 gb RAM
Radeon x300 SE 128mb hypermemory
direct x 9.0
creative SB live! 24-bit
160gb maxator SATA HDD
View 3 Replies
View Related
Feb 7, 2012
Windows 7 freezes as dots begin to come together, 2 tiny dots (red & yellow), then goes to black screen. Startup repair boots to light Microsoft logo. Won't boot from 3 recovery dvds, or reinstall, goes to same screen. Gateway DX4320, AMD Phenom II, Stock hardware
View 1 Replies
View Related
Aug 12, 2012
So I just did a new custom built comp and got Windows 7 Professional for it. I burnt it to a DVD from the ISO I got from the Microsoft Store. It would freeze at the Starting Windows screen just after the 4 dots converged into the logo.
Things I've tried:
-One stick of RAM
-Installed on same HDD on another computer rig (Booted fine until I brought it back to my new rig. Then it wouldn't boot on neither)
-Memtest
-USB Boot installer
I also have all the unneeded peripherals out.
Rig:
Z68XP-UD3 (Using onboard VGA until 7 is working then its a Asus GTX 560 Ti)
1 4 GB Corsair Vengence 1600 MHZ. (Took the second out)
I5 2500K 3.3 GHz(Stock)
600W OCZ MODX Stream Pro
1 TB Western Digital Black HDD
View 1 Replies
View Related
Aug 12, 2011
Last night, my laptop randomly shut itself off. When I tried to restart it, I get to the Windows Loading screen and a line of color moves across the top of the screen and freezes in the top right. I tried pulling the battery and starting up, starting up on just battery power, re-seating the hard drive, re-seating the RAM, pulling one DIMM and then the other and starting up that way. All of them have the same result. I ran everything in the automatic startup repair, still have the problem. Trying to run chkdsk and sfc from startup repair said I was pending a reboot for something and it couldn't run. Tried to go into safe mode with networking and it hangs after reporting halmacpi (I think).
I pulled the hard drive and connected it to my desktop, I could see everything and am currently backing up 100GB of data, so it doesn't appear to be a problem with the hard drive. My next thought was to go into the repair console and see what I can do, but it's a Dell that came with Vista and a free download of 7 so I don't have any media unless I borrow a disk from work.System is a Dell E5500, Core 2 Duo P8600 with 3GB RAM.I did go through some old posts about similar sounding problems, but since they all appeared to relate to desktops, I wanted to post fresh.
View 1 Replies
View Related
Sep 9, 2011
running Windows 7 Ultimate, all updates installed, and Windows freezes at the Starting Windows screen quite often. The solution is to restart the computer, and it will always boot up successfully the 2nd timed say this happens for at least a third of startups, if not half. I have tried anything to fix it, but sitting at work with a minute to spare, and thought d ask if this was a common issue with an easy solution. If not, is there some log file I can check to see what going on?
View 5 Replies
View Related
Dec 26, 2012
I recently purchased a Dell XPS 15 (l521x) that came with Windows 8. The system boots from the hard drive through UEFI by default, so I think the hard drive is already GPT. I am attempting to install Windows 7 from a UEFI bootable USB. The system goes through the 'copying files' phase and then goes to the Starting Windows screen. As the colored dots of the Windows logo are circling, the system freezes. Can someone help me fix this problem? The following are the steps I took in order to install Windows 7:
- Formatted a brand new 4GB USB drive to FAT32
- Downloaded Windows 7 ISO (I have a key)
- Extracted ISO files to USB
- Made adjustments so that USB is UEFI bootable (efi/boot/bootx64.efi)
- In BIOS, set SATA Operation to AHCI and disabled Secure Boot
- Select USB drive from UEFI boot menu
View 9 Replies
View Related
Nov 17, 2009
When I run the Windows 7 Home Premium OEM disc I get past "loading files" and then freeze on "starting windows". I see 4 little colored balls in the center of the screen (guessing the start of the MSFT logo) and then everything freezes.
Here's what I've got:
Monitor: Samsung T260HD 25.5in Rose/Black LCD w/ATSC
HDD: 2 x Seagate 1.5TB Serial ATA HD 7200/32MB/SATA-3G
Memory: Corsair Dominator 6144MB PC12800 DDR3 1600MHz (3x2)
DVD: LG 22X DVDRW SATA
Motherboard: ASUS P6TD Deluxe Intel X58 Socket LGA1366 MB
Power Supply: Corsair 950w 80 Plus Power Supply
GPU: 5850 is backordered, so am using an old Nvidia 6600 GT to attempt to install Windows - connected to monitor with DVI cable
OS: Windows 7 Home Premium OEM
I've done lots of research and tried:
1. Using a PS2 keyboard/mouse
2. Disabling USB in bios
3. Disabling just about everything else in bios
4. Tried w/ 2MB, 4MB and 6MB ram
Any help or suggestions would be greatly appreciated.
View 33 Replies
View Related
Feb 10, 2012
OK, trying to put windows 7 on a motion m1300 tablet. 1gig ram 1ghz cpu and 60gb hard drive. due to the bios being limiting install from xp desktop is impossible, so using an external disk drive i am trying to do a clean install, but it just stops at setup is starting, i know that seven will run on these, seen it with my own eyes, but i cannot get setup past this part.i have a feeling its the graphics driver, but getting into device manager from the language screen/ click here to install screen hasnt worked. its not in the system32 folder and so i dont know where to lookedit: before its asked, yes the disk is good, and i cant use a usb because the bios wont alow it. also the bios are up to date
View 8 Replies
View Related
Mar 6, 2011
I recently built a computer, and tried to install Windows 7 OEM on it, but it gets stuck at the screen where it says starting windows and the logo appears. The logo gets smaller and larger. I've been told it might be something with the RAM, but tested it out and that's not the problem.
View 2 Replies
View Related
Mar 28, 2011
I'm trying to install Windows 7 on my PC again, and came to a blank screen after the reboot. I have the PC hooked up to a TV using the S-Video output on my graphics card, and suspect that win 7 is using the DVI port instead. There is no way at the moment that I can use the DVI port because I don't have a monitor that supports it.
is there a way around this so I can use the S-video output for the rest of the installation?
View 3 Replies
View Related
Feb 23, 2012
I'm trying to install Windows 7 on a new SSD, my old hard drive crashed. My video card is an onboard ATI Radeon HD 4250. Initial setup works fine, but when the computer reboots it comes back up blank. I'm already running two monitors, one VGA and one DVI, and safe mode doesn't work either, I've tried booting from a flash drive and a dvd with exactly the same results.
View 9 Replies
View Related
Feb 2, 2012
I just did my first build and I am having a big problem with installing windows 7 on it. When I boot it's starts loading and then I get a black screen. I didn't get any options before or any command.
[code]...
View 3 Replies
View Related
Dec 4, 2012
So I had finally got my first build ever running a few hours ago. Was so excited. I used the program wintoflash to copy my windows installation cd to my flash drive. Popped the flash drive in my new rig and booted it up. It went to installation and took a bit of time to completely install. As it restarted after install the windows startup came up and was continuously going for quite some time and never stopped. So where I am at is that I cant get past the start up screen.
I have tried so much. I pulled out the second stick of ram, the gpu.. ran memory check with no errors, tried re installing windows in many ways (different partitions).I tried running in safe mode but it just gets stuck at disk. The only thing I knoticed is that windows 7 installs faster the second time around, even after deleting all the memory on the hard drive (advanced option during install). I have browsed the web and nothing has helped. Just got a new mobo after replacing the last defected one today, so that cannot be the problem. Completely and utterly frustrated to be presented with another speedbump after all this hard work to get it running.
My rig:
Intel i-5 3rd gen.
Kingston hyperx 2x8gb
AsRock b75m-dgs motherboard.
nvidia gt 440
Western Digital Caviar 250gb 7200.
View 5 Replies
View Related
Dec 27, 2012
Ive been running Win 7 Ultimate 64 for over a year with no problems. For Christmas I got a new HD because my old ones were full. I copied my files from my two old hard drives to the new one and then tried to do a clean install. After the installation when windows boots for the first time it works, but the picture has about two inches of black space all around and the resolution is at like 800x600. Im pretty sure the only thing i need to do to fix that is install and update my graphics drivers. The problem is after I start installing updates I have to restart windows. When it boots up for the second time all the black space is gone and the picture looks right but it always stops right after the black windows loading screen on the default background with no icons, only my curser. Ive tried to install windows again but the same thing happens. Ive tried safe mode and last known good config. Startup repair finds no problems at all. And when i restore with a system image the problem comes back as soon as I update something then restart.
View 4 Replies
View Related
Apr 29, 2012
I'm weeks of spasmodic attempts into replacing my old C-drive with a new SSD and a clean install of Windows 7, 32 bit. Here's the current loop: Following Sandisk's instructions on formatting SSD for use as OS with Win 7:
1) I verify BIOS - SATA is (as before) set to ACHI
2) I place Windows 7 upgrade disc in drive, hoping to use "Option 1 - normal clean install" (from Clean Install with a Upgrade Windows 7 Version )
3) I get "Windows Error Recovery" screen, stating "windows did not shut down normally" (white text on black screen), with two options - start normally, or startup repair.
- if I select "start normally," it merely returns (after a minute or two) to the same Error Recovery screen after some POSTs (nothing other than single-beep) - no request for my input, no "press any key," etc.
- if I select default ("startup repair") option load: "Windows cannot repair this computer automatically" ultimately results after a lot of attempting to repair, etc.
PC will still run Ok from old HD when connected, and shows the SSD in Disk Management with a "System Reserved" 100 MB (F) partition along with a 112GB (E) partition. I keep thinking I need to wipe those and try again, but not sure how or if that's even worth trying. I did have the same SSD up and running Win 7 for a brief time - didn't start at some point afterwards...
View 9 Replies
View Related
Jul 18, 2012
I am building a computer for my parents and, after reaching the "starting windows" screen and the logo popping up, it hangs. Before this happened I was able to reach the configuration screen after that, but the hard-drive was connected incorrectly. After I connected it right, it started freezing. Here are my specs:
Intel Pentium G850 2.9GHz Dual Core processor Radeon HD 6670 BIOSTAR H61MLB LGA 1155 Micro ATX motherboard 8gb G.SKILL 1333 MHz RAM Western Digital Caviar Blue 500gb 7200 RPM hard drive RAIDMAX 450W power supply LITE-ON blu-ray combo disc drive Creative Sound Blaster audio card Windows 7 Home Premium
View 2 Replies
View Related
Sep 6, 2011
I was trying to install windows 7 on another volume in my windows xp machine. I don't know if I was supposed to change in BIOS to the new volume or not, but I didn't. During the installation process when windows 7 rebooted the first time, it hangs at the mainboard splash screen. I'm on another machine right now, so I borrowed this data from a recent post:
System Info Utility version 1.0.0.1
OS Version: Microsoft Windows XP Professional, Service Pack 3, 32 bit
Processor: Intel(R) Core(TM)2 Duo CPU E4600 @ 2.40GHz, x86 Family 6 Model 15 Stepping 13
Processor Count: 2
RAM: 2046 Mb
Graphics Card: NVIDIA GeForce 8800 GT, 512 Mb
Hard Drives: C: Total - 28003 MB, Free - 11849 MB; D: Total - 29996 MB, Free - 8332 MB; E: Total - 180464 MB, Free - 84723 MB; F: Total - 38154 MB, Free - 15970 MB;
Motherboard: Foxconn, 45CMX/45GMX/45CMX-K, , UYRL81513187
Antivirus: AVG Anti-Virus Free Edition 2011
The computer now also has two new Hard Drives:
I: Total - 200000 MB, Free, (appx) 190000 MB
J: Total - 800000 MB; Free - 800000 MB
It's on HDD "I" that I was installing windows 7.
View 1 Replies
View Related
Aug 16, 2011
I've recently built my first gaming PC and am having trouble installing windows 7 ultimate. Whenever I try to boot from the cd, it loads the Windows 7 files, then freezes on the first screen of the install wizard Unlike this image however, I have no cursor and there seems to be no response to keyboard input. This is in contrast to when I open the BIOS menu and both mouse and keyboard work[CODE]
View 8 Replies
View Related
Dec 13, 2009
If the computer has been on for an hour or so windows freezes 9 of 10 times when starting a new application. No matter which app it is, it can be Maya, 3ds Max, Photoshop, After Effects, Spotify or even a simple jpg/targa picture in any program. But just after rebooting everything works fine for about an hour or two, it's then the problem starts. And it doesn't freeze always, sometimes the computer can be on for a couple of days without rebooting and I start any application normally, but that happen like 1 of 10 times. I'm running the latest drivers for the graphics card, mobo, mouse/keyboard and I've even tried with older drivers for the components but the problem still remains.
View 9 Replies
View Related
Sep 27, 2012
I upgraded my Intel Rapid Storage software, reset the computer and now it won't get passed the windows starting screen. The windows logo comes up then it freezes, I have tried leaving it for over an hour to see if it sorted itself out, and powered it off completely. Numerous re-boot attempts all the same result.If I choose to boot windows with last known working configuration it will start up, and in the bottom right corner give me the error that Intel Rapid Storage is not running. If I then go into control panel and uninstall it the computer will boot just fine. At first I thought it maybe was a bad install of the software, but any re-install of the software does the same.trange since until I went to install the new version it worked perfectly fine, it has even saved me some data notifying me of S.M.A.R.T. failures in time for me to copy the data off the drive. I am running flexraid in snapshot mode and have it update nightly just in case, but I wouldn't mind getting the new version of the software to work unless the experts here think it is not necessary.
View 6 Replies
View Related
Oct 6, 2012
I have a new computer build and when I load win 7 pro out of the box it freezes on install at the install screen/language to install etc. I have tried everything that I know of specs on computer asus p9x79 pro, 32gb gskill z series ram 1600mhz, cxrucial 512 ssd, intel 3930k cpu. I have tried 1 stick of ram also tried bios in default state with all auto settings, I have another copy of os that i tried it does same thing
View 3 Replies
View Related
Dec 22, 2012
I recently tried to build a computer and failed epically. So I put my hardrive back in my old PC. Upon booting the PC it runs fine until it reaches :starting windows".
Where it freezes, and then restarts.
View 5 Replies
View Related
Nov 21, 2009
After few seconds start screen disappears and is repalced by a Black/Blank screen with only mouse pointer. Mouser is working but there is nothing on screen to click on. Keyboard is working fine too. (checked with NumLock and Caps Lock keys)
Nothing happends beyond this point even after rebooting and repeating above process.
Searched internet for above problem symptoms. Looks like Windows 7 decides default monitor on its own. There is no way to decide it yourself duing installation.
My motherboard has two ports. 1 DVI and 1 analog. I have only 1 Analog monitor and do not plan on buying/having another monitor.
DVI to analog convertor is not available in market to test display from DVI port.
Could somebody please help?
View 8 Replies
View Related
Sep 27, 2012
Ill try to make this short and simple, i had same pc for around 3 years now, finally managed to ruin my first win 7 instalation by being lazy, that resulting in long needed reinstall, no problem there,But after everything was done, my pc started randomly freezing for around 1-5 mins ( depends, usually around 3 mins ) then it just comes back alive like nothing happened, sometimes video driver crashes My first thought was that my hdd finally dying on me, but after numerous test found nothing wrong on any of them and freezes doesnt always occur on hdd usage i ruled that out, some googling blamed it on new video drivers, got other ones, same, still freezing, reseted my bios to default, still same, sometimes i can turn on a game and play 2 hours straight and nothing will happen, next time i can startup movie and it will freeze 2 times in 5 mins, already reinstalled coddecs and video players i am just running out of ideas here, never had this issue before, using same windows 7, same install, same pc and all of my drivers/programs are same ones i used
View 11 Replies
View Related