Windows 7 freezes as dots begin to come together, 2 tiny dots (red & yellow), then goes to black screen. Startup repair boots to light Microsoft logo. Won't boot from 3 recovery dvds, or reinstall, goes to same screen. Gateway DX4320, AMD Phenom II, Stock hardware
View 1 RepliesMy Gateway runs great until a restart is requested by me or a program. A few days ago, it would restart just fine. When I select Restart, the computer appears to shut down fine, it beeps to restart, the Windows 7 screen begins to open but it freezes with three colored dots on the screen. It always stops in exactly the same place.
If I kill power, then boot again I get an offer for Windows to repair itself. If I let it, it cannot repair. If I select Boot Windows Normally, all is well. Except for this one problem, things are really running well. Odd. I've run Chkdsk, SFC/ SCANNOW, and PC Pitstop Optimize3. Nothing finds a problem or fixes anything.
System Info Utility version 1.0.0.1
OS Version: Microsoft Windows 7 Home Premium , Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i7 CPU 965 @ 3.20GHz, Intel64 Family 6 Model 26 Stepping 4
Processor Count: 8
RAM: 12279 Mb
Graphics Card: ATI Radeon HD 4870 X2 , 1024 Mb
Hard Drives: C: Total - 953766 MB, Free - 875155 MB; D: Total - 953866 MB, Free - 824991 MB;
Motherboard: Gateway, TBGM01, , U00B092001094
Antivirus: Lavasoft Ad-Watch Live! Anti-Virus, Disabled
Avast/Comodo
When my computer finishes starting up, it ends with what looks like blobs of colored pixels in a line at the top of my screen. This happened for the first time tonight and I have no clue what happened. I took out my video card and plugged my monitor into the mother boards vga slot. Same result. Then i used a HDMI cable from my monitor to my motherboards HDMI slot. Still, with the same result. I plugged my Xbox 360 up to monitor with the HDMI cable and it looks fine so it's not on the monitor's end.
When the computer is loading, the screen stays black. Then when my desktop would normally show is when the pixels show up and the rest of the screen is black.
I have a Canon printer which prints coloured dots in grayscale mode. I selected all the options which are related to this problem and nothing solved the problem....I found out that if i check the duplex option this problem occurs and if i don't select this option the coloured dots don't appear in grayscale mode. Can this problem came from the Windows driver or Windows print wizard...? I have the Canon driver installed and i have Windows 7
View 9 Replies View RelatedI have a Acer Aspire 5542-1462 laptop, windows 7. One out of every 3 boot-ups the comp. freezes at the desktop with the screen shaking with long colored lines or short lines in a small area of the screen.
View 3 Replies View RelatedA while ago i dual booted windows 7 onto my vista running laptop and it works perfectly. It is a huge improvement on vista, it is faster, better designed and its new features are very useful. Because of this success I know am trying to dual boot it onto my xp running desktop. Unfortunately it doesn't seem to like it.
I have used the same technique that i did on my laptop to install it. I have burnt the iso file onto a disk and run that disk while the computer is running. Checked for online updates and done a clean install. The installation works fine and quite quickly until it comes to the first restart. It restarts and I select "windows setup" on the bios screen as apposed to "an earlier version of windows" which is my xp partition.
It then changes to the starting windows screen that happens just like on my laptop, except the windows logo never materializes and it stays as a black screen with the words "starting windows" on it. i have left the computer on overnight and no change. I have tried reinstalling several times with no luck, both using the same method as before and booting from the disk at startup. Although when I boot from the disk it just skips straight to the same frozen windows startup screen.
I have downloaded the windows 7 adviser software but the program cant seem to make its mind up. Sometimes it announces that my graphics card cant run windows 7 aero and sometimes its fine. I have checked the windows 7 specs and my graphics card appears to meet all the requirements, both dedicated memory and direct x 9 support.
Here are my pc specs:
Dell dimension 5150
XP professional sp3
3ghz intel pentium 4
5 gb RAM
Radeon x300 SE 128mb hypermemory
direct x 9.0
creative SB live! 24-bit
160gb maxator SATA HDD
After recently building a custom PC, I am doing a clean install of Windows 7 (64 bit) and all goes well through the installation process (loading, expanding files, etc) except when after the 2nd restart when it starts up for the first time. It freezes or hangs on the black “starting windows” screen (the one with the new colored windows logo).
I have tried installation a number of times, including with a bare bones configuration (2 Gb RAM, 1 HDD, 1 DVD Drive, GPU, and all other peripherals disconnected) and still the same thing happens. I have also tried the process using the VGA cable instead of the DVI.
I was able to successfully install XP after failing to install Win7, so I don't think my HDD is bad. I am also using a PS/2 Keyboard
System:
CPU: Intel Core 2 Quad (Q9650) 3Ghz/1333Mhz/12MB
MBoard: Asus P5K-E
GPU: Sapphire HD 2600XT
HDD: 2 x WD 640 Gb 7200/32MB/SATA 3.0Gb/s (Caviar Black WD6401AALS)
RAM: Mushkin 4Gb DDR2 SDRAM (2 x 2Gb)
PSU: Antec NeoPower HE550w (ATX 12v)
OS: Windows 7 Ultimate (64 bit) OEM system builder pack
All components were purchased new from Newegg. I also have some peripherals: 2 DVD drives, Multi card reader, extra USB, firewire ports, wireless LAN card (although I disconnected those for the initial install attempt).
Any help or advice would be greatly appreciated. I am really at a loss to figure this one out. Could it be something to do with my video card driver? (Do I need to install that in the BIOS?)--I can see everything fine on my monitor though.
I've been using my PC fine for the last 3 years. A month or so ago I updated to Windows 7 Ultimate x64. That too has been running fine, then today, after about 3-4 hours of use, in the middle of a game, my PC screen suddenly got weird wavy lines and colours all over it and crashed. Long story short this has now happened about 10 times. Interestingly, I thought it was a graphics card problem, so I tried it on my HD TV (both TV and monitor connected via HDMI) and it did it on the TV too. I then uninstalled the nvidia (8800gt) drivers and restarted my PC. It works fine in safe mode, and in normal mode, but I can't change my resolution to 1680x1050, (it's native resolution) without installing the nvidia drivers.
I don't know if the problem is the drivers, (but never had an issue before?) or with resolution, (monitor problem?) Every time I do install the nvidia drivers the PC restarts normally, screen looks fine, and the PC seems to run, until I click on anything with the mouse and then the wavy lines and weird colours appear again and I can't CTL-ALT-DEL, I have to hard reset it every time. Once I left it for 5 mins. and moved the mouse a little every min. or so and that was OK, but as soon as I click on anything, it freezes and artifacts again. Also, my antivirus flashed red a few times and so did the windows clock in the bottom right corner of the screen, (very odd!) when the PC first starts windows.
That made me think it could be a virus, (even though I'm very careful about what I DL), but I had Avast run through a deep clean check and it found nothing. I also tried to get Win 7 to repair itself, which did nothing either! I've tried reinstalling the drivers, using newer and older nvidia drivers and I've tried to install my HG216 monitor driver, but since it's a few years old there is no official Win 7 support and all I have is an inf. file I can't install on Win 7. I haven't included a dump file, I know a fair amount about computers but I haven't worked out how to do that yet. Also, since I have to hard reboot everytime, in my event view the only errors listed seem to be about 'power failure', so I don't know if the bug or whatever would show up in the dump file?
My new laptop windows 7 has distored colors on my screen when i turn it on, whereby i cannot see my desktop or sometimes its blury.
View 2 Replies View RelatedLast night, my laptop randomly shut itself off. When I tried to restart it, I get to the Windows Loading screen and a line of color moves across the top of the screen and freezes in the top right. I tried pulling the battery and starting up, starting up on just battery power, re-seating the hard drive, re-seating the RAM, pulling one DIMM and then the other and starting up that way. All of them have the same result. I ran everything in the automatic startup repair, still have the problem. Trying to run chkdsk and sfc from startup repair said I was pending a reboot for something and it couldn't run. Tried to go into safe mode with networking and it hangs after reporting halmacpi (I think).
I pulled the hard drive and connected it to my desktop, I could see everything and am currently backing up 100GB of data, so it doesn't appear to be a problem with the hard drive. My next thought was to go into the repair console and see what I can do, but it's a Dell that came with Vista and a free download of 7 so I don't have any media unless I borrow a disk from work.System is a Dell E5500, Core 2 Duo P8600 with 3GB RAM.I did go through some old posts about similar sounding problems, but since they all appeared to relate to desktops, I wanted to post fresh.
running Windows 7 Ultimate, all updates installed, and Windows freezes at the Starting Windows screen quite often. The solution is to restart the computer, and it will always boot up successfully the 2nd timed say this happens for at least a third of startups, if not half. I have tried anything to fix it, but sitting at work with a minute to spare, and thought d ask if this was a common issue with an easy solution. If not, is there some log file I can check to see what going on?
View 5 Replies View RelatedMy Laptop loads fine when started but as soon as I get the windows 4 Dots turning it is a Blank Screen.
View 1 Replies View RelatedI just installed my windows 7 ultimate edition and noticed that something was going wrong. Look at the picture below. Look at the color lines.
View 4 Replies View Relatedam running Windows 7 Home Premium. Aspire, Intel i5-2430M 2.4 GHZ, 64 bit Operating System. We only bought this at the end of December, 2011! When I am on Blogger, I haven't noticed it otherwise, when I move my mouse, sometimes the whole screen goes patchwork. There are squares of yellow, green and orange covering the screen, except for the address bar. (I attached a picture) I can navigate to a new address and it goes away. I am just a bit concerned there is a virus. I have run a full scan with Super Anti Spyware and I quite regularly use Crap Cleaner.
View 9 Replies View RelatedIt all started when I decided to upgrade to Windows 7 x64 from my Vista x64. I had nothing of importance on the computer, so why not do a clean install and start fresh? It installed fine and rebooted several times until the computer had the Setup Is Checking Video Performance, it froze on that screen. I had to reboot it and now here is my current issue.....
Installation is going fine, goes to Completing Installation and then reboots..Then shows a black screen with blinking cursor for 5 minutes. Then restarts itself and has Windows Recovery Error. I chose Start Windows Normally and it goes to Starting Windows screen with the logo. I've tried letting it sit there for 30 minutes until it restarts itself and states..Windows failed to start. A recent software or hardware change may be the cause..etc etc..
So basically it's just a constant cycle of Starting Windows screen and Windows Recovery Error screen Unless I press f10 to go into the Boot Options.
Gateway FX4710
Intel Core 2 Quad Q9300 / 2.5 GHz
6GB Ram / 667.0 MHz
NVIDIA GeForce 9800 GT / 512.0 MB
Windows 7 hangs up on start up and after about 10 minutes goes to password. Once the password has been entered it goes to Welcome. the Green circle to the left of the W rotates and then stops.
View 1 Replies View Relatedthe screen going on the fritz only when playing a video. i have not tried playing a video on vlc or wmp to test this but it seems almost every time a video pops up on a website, or if i go to Internet, my screen goes crazy.per the other thread, i swept my old drivers and re-installed the newest (which was 12.9 beta) and everything is ok, cept these videos. to fix it, i have once or twice gotten lucky and been able to hit escape and it goes back to normal. otherwise, i have to hit the power button and make it go into sleep/lock mode. i have a second monitor hooked up and it doesn't do what monitor one does, which is very odd.card is xfx radeon r7770 ultra overclocked black edition (factory overclocked)p.s. tried to use the uploader for pic and it wasn't working for me at all. tried to use imgur also, said it was down for maint.
View 3 Replies View RelatedMy mom has a Compaq laptop. It has Windows 7. Yesterday, the screen randomly turned a blue-ish green color. The Google Chrome new tab page is where she first noticed. It's pretty much wherever there should be white, there's that funny color. When I restart it, the white Compaq "Q" logo is green instead of white. The "Starting Windows" text is green and the light inside of the Windows logo is green also.
View 1 Replies View RelatedI tried to do a routine (once a year) chkdsk via the command prompt Code: > chkdsk /r
> shutdown /r /f /t 1 . And upon the reboot, all I get is a black screen, no cursor, with ~4 rows of rainbow, garbled pixels at the very top of the monitor (certain pixels occasionally change colours). This occurs before the windows splash screen. I have left the computer as is, hoping it will eventually boot on its own with no luck. This was just a routine check. Some more information, I dual-boot with Ubuntu. I can mount and access the windows partition from Ubuntu, and I even ran ntfsfix in Ubuntu (which has some analogous functionality to chkdsk), but it didn't notice any problems.
If the computer has been on for an hour or so windows freezes 9 of 10 times when starting a new application. No matter which app it is, it can be Maya, 3ds Max, Photoshop, After Effects, Spotify or even a simple jpg/targa picture in any program. But just after rebooting everything works fine for about an hour or two, it's then the problem starts. And it doesn't freeze always, sometimes the computer can be on for a couple of days without rebooting and I start any application normally, but that happen like 1 of 10 times. I'm running the latest drivers for the graphics card, mobo, mouse/keyboard and I've even tried with older drivers for the components but the problem still remains.
View 9 Replies View RelatedI recently tried to build a computer and failed epically. So I put my hardrive back in my old PC. Upon booting the PC it runs fine until it reaches :starting windows".
Where it freezes, and then restarts.
I have compaq presario sr1630nx and I have an issue that started after I opened the case and used my compressor to blow the dust out of it its not the first time ive done this like 4 times to be exact. My machines issue starts when I turn it on the fans go on but the cpu fan runs the loudest and it displays nothing other attempts it turns on normal but still nothing on the display. After idk the twentieth attempt of turning on and off it finally boots up normally, but I cant do nothing major like go on the web to long because it freezes right away. i could listen to music but it will eventually freeze after fifteen minutes or the display will turn to an orange or blue screen. The pc does have some upgrades like a graphics card for two dvi inputs and power supply which were done about a year ago.
View 1 Replies View RelatedWell, as the title suggests - I have an AGP HD2600, and whenever I install the ATI Display Driver (any version, from 7.10 right through to the Windows 7 Preview Drivers).
The install process itself proceeds fine without any issues (although Device Manager never recognizes my card - always calls it a VGA Adapter) but whenever I reboot after installing said drivers, it freezes at the Starting Windows section - right at the part where the desktop should load up.
I've tried compatibility mode, I've tried disabling enforced driver signatures, but the only thing that lets me boot after installing the ATI Drivers is to system restore back to the crappy VGA Adapter generic driver.
OK, trying to put windows 7 on a motion m1300 tablet. 1gig ram 1ghz cpu and 60gb hard drive. due to the bios being limiting install from xp desktop is impossible, so using an external disk drive i am trying to do a clean install, but it just stops at setup is starting, i know that seven will run on these, seen it with my own eyes, but i cannot get setup past this part.i have a feeling its the graphics driver, but getting into device manager from the language screen/ click here to install screen hasnt worked. its not in the system32 folder and so i dont know where to lookedit: before its asked, yes the disk is good, and i cant use a usb because the bios wont alow it. also the bios are up to date
View 8 Replies View RelatedI have a Toshiba laptop, that always freezes randomly. It worked fine up until about a week ago... I can't do anything, I start a program or a game, or open the internet and it freezes usually within five minutes. I can't do anything to fix it, like move the mouse or press control alt delete.
View 7 Replies View RelatedI just completed a new build and windows 7 does not install. I have an MSI k9n6pgm2-v2 mobo with athlon x2 7850 cpu and a seagate 1 tb sata hdd. POST and BIOS setup run fine but windows 7 freezes at starting windows screen?
View 3 Replies View Related[code]...
I have been trying to CLEAN INSTALL windows 7 64bit or 32bit. Ive tryed both but neither seem to work. I've made a bootable USB with both iso's. I've burned both iso's to DVD's. With every try to install it i get the same results. It gets past the "windows is loading files" screen, then once it gets to the "starting windows" screen the 4 orbs show up start to make a circle and freeze. It doesnt go any further.
As of about 3 days ago my Dell Inspiron N7010 (Windows 7 Home Prem 64bit) fails to boot up. It gets to the initial Windows screen before the login screen and freezes, then sends me into Startup Repair. [code] I've tried running the diagnostics and get no error codes. I've tried restore points, memory diagnostics.. pretty much everything except factory image, with no success. I have a lot of government programs installed on this laptop, so.
View 9 Replies View RelatedI've got a: Presario CQ62 notebook pc with a AMD Athlon(tm) II P320 Dual Core processor, and I can't get past the start up screen with the "starting windows" animation. It will show part of the animation then simply hang. I have a very bad battery but am keeping the computer plugged in. When I attempt a system recovery it says: "A disk read error occurred press ctrl+alt+del to restart" I've tried this many times and I get the same message each time. Beyond that I have no idea what to try.
View 2 Replies View RelatedI seem to have a odd issue with my laptop. Sometimes when i boot into windows there would be a blank screen with a mouse cursor after the starting windows screen. I would have to wait for approximately 5 minutes for it to show up my logon screen. I've been having this issue since the start of the year and have attempted to solve it but they have been unsuccessful. Things i've tried:Reformat Windows (Did it 4 times)Purchasing a SSDReduced the start-up items(barely any)?
View 14 Replies View RelatedIs there a way to change the background image that displays during boot before it gets to the login screen?
View 5 Replies View Related