Windows 7 hangs up on start up and after about 10 minutes goes to password. Once the password has been entered it goes to Welcome. the Green circle to the left of the W rotates and then stops.
View 1 RepliesAfter recently building a custom PC, I am doing a clean install of Windows 7 (64 bit) and all goes well through the installation process (loading, expanding files, etc) except when after the 2nd restart when it starts up for the first time. It freezes or hangs on the black “starting windows” screen (the one with the new colored windows logo).
I have tried installation a number of times, including with a bare bones configuration (2 Gb RAM, 1 HDD, 1 DVD Drive, GPU, and all other peripherals disconnected) and still the same thing happens. I have also tried the process using the VGA cable instead of the DVI.
I was able to successfully install XP after failing to install Win7, so I don't think my HDD is bad. I am also using a PS/2 Keyboard
System:
CPU: Intel Core 2 Quad (Q9650) 3Ghz/1333Mhz/12MB
MBoard: Asus P5K-E
GPU: Sapphire HD 2600XT
HDD: 2 x WD 640 Gb 7200/32MB/SATA 3.0Gb/s (Caviar Black WD6401AALS)
RAM: Mushkin 4Gb DDR2 SDRAM (2 x 2Gb)
PSU: Antec NeoPower HE550w (ATX 12v)
OS: Windows 7 Ultimate (64 bit) OEM system builder pack
All components were purchased new from Newegg. I also have some peripherals: 2 DVD drives, Multi card reader, extra USB, firewire ports, wireless LAN card (although I disconnected those for the initial install attempt).
Any help or advice would be greatly appreciated. I am really at a loss to figure this one out. Could it be something to do with my video card driver? (Do I need to install that in the BIOS?)--I can see everything fine on my monitor though.
When I run the Windows 7 Home Premium OEM disc I get past "loading files" and then freeze on "starting windows". I see 4 little colored balls in the center of the screen (guessing the start of the MSFT logo) and then everything freezes.
Here's what I've got:
Monitor: Samsung T260HD 25.5in Rose/Black LCD w/ATSC
HDD: 2 x Seagate 1.5TB Serial ATA HD 7200/32MB/SATA-3G
Memory: Corsair Dominator 6144MB PC12800 DDR3 1600MHz (3x2)
DVD: LG 22X DVDRW SATA
Motherboard: ASUS P6TD Deluxe Intel X58 Socket LGA1366 MB
Power Supply: Corsair 950w 80 Plus Power Supply
GPU: 5850 is backordered, so am using an old Nvidia 6600 GT to attempt to install Windows - connected to monitor with DVI cable
OS: Windows 7 Home Premium OEM
I've done lots of research and tried:
1. Using a PS2 keyboard/mouse
2. Disabling USB in bios
3. Disabling just about everything else in bios
4. Tried w/ 2MB, 4MB and 6MB ram
Any help or suggestions would be greatly appreciated.
I am trying to do a clean install of Windows 7 64 bit. It hangs at the starting windows screen and does nothing more. No HDD activity or anything. Let it sit all night like that to see if it would go any further, but it didn't. Anyone else have this experience, and if so, what did you do to make it work?
View 6 Replies View RelatedWindows 7 clean install hangs at starting windows screen
View 4 Replies View RelatedI recently got a new asus laptop and some of my programs aren't compatible with windows 8. So i'm trying to downgrade to windows 7 because i never liked w8 in the first place. So when i boot from CD (64-bit windows 7 ultimate) it will install without any problems, but when it gets to the 'starting windows' screen the animation freezes and it just stays there.
View 49 Replies View RelatedI upgraded my Intel Rapid Storage software, reset the computer and now it won't get passed the windows starting screen. The windows logo comes up then it freezes, I have tried leaving it for over an hour to see if it sorted itself out, and powered it off completely. Numerous re-boot attempts all the same result.If I choose to boot windows with last known working configuration it will start up, and in the bottom right corner give me the error that Intel Rapid Storage is not running. If I then go into control panel and uninstall it the computer will boot just fine. At first I thought it maybe was a bad install of the software, but any re-install of the software does the same.trange since until I went to install the new version it worked perfectly fine, it has even saved me some data notifying me of S.M.A.R.T. failures in time for me to copy the data off the drive. I am running flexraid in snapshot mode and have it update nightly just in case, but I wouldn't mind getting the new version of the software to work unless the experts here think it is not necessary.
View 6 Replies View RelatedI am with a friend re-installing Windows 7 on his laptop. Unfortunately the laptop had been infected beyond repair by a virus/malware and would not boot past bios. When installing Windows 7 x32, I make it to the "Setup is starting..." screen and it does not continue. It is not the disk as I have used the same one to install it on my laptop. The laptop is a Dell Inspiron 1545 with 4gb of ram and 500gb HDD space.
View 14 Replies View RelatedWhen windows updates, it then reboots, and just hangs on the 'starting windows' screen. Only after it updates, works fine before. I've re-installed it many times, but get the same result. This never used to happen until i did this fresh installation today. Now it happens every time, just after it installs some standard updates, it wont boot up..
View 1 Replies View RelatedIt all started when I decided to upgrade to Windows 7 x64 from my Vista x64. I had nothing of importance on the computer, so why not do a clean install and start fresh? It installed fine and rebooted several times until the computer had the Setup Is Checking Video Performance, it froze on that screen. I had to reboot it and now here is my current issue.....
Installation is going fine, goes to Completing Installation and then reboots..Then shows a black screen with blinking cursor for 5 minutes. Then restarts itself and has Windows Recovery Error. I chose Start Windows Normally and it goes to Starting Windows screen with the logo. I've tried letting it sit there for 30 minutes until it restarts itself and states..Windows failed to start. A recent software or hardware change may be the cause..etc etc..
So basically it's just a constant cycle of Starting Windows screen and Windows Recovery Error screen Unless I press f10 to go into the Boot Options.
Gateway FX4710
Intel Core 2 Quad Q9300 / 2.5 GHz
6GB Ram / 667.0 MHz
NVIDIA GeForce 9800 GT / 512.0 MB
A while ago i dual booted windows 7 onto my vista running laptop and it works perfectly. It is a huge improvement on vista, it is faster, better designed and its new features are very useful. Because of this success I know am trying to dual boot it onto my xp running desktop. Unfortunately it doesn't seem to like it.
I have used the same technique that i did on my laptop to install it. I have burnt the iso file onto a disk and run that disk while the computer is running. Checked for online updates and done a clean install. The installation works fine and quite quickly until it comes to the first restart. It restarts and I select "windows setup" on the bios screen as apposed to "an earlier version of windows" which is my xp partition.
It then changes to the starting windows screen that happens just like on my laptop, except the windows logo never materializes and it stays as a black screen with the words "starting windows" on it. i have left the computer on overnight and no change. I have tried reinstalling several times with no luck, both using the same method as before and booting from the disk at startup. Although when I boot from the disk it just skips straight to the same frozen windows startup screen.
I have downloaded the windows 7 adviser software but the program cant seem to make its mind up. Sometimes it announces that my graphics card cant run windows 7 aero and sometimes its fine. I have checked the windows 7 specs and my graphics card appears to meet all the requirements, both dedicated memory and direct x 9 support.
Here are my pc specs:
Dell dimension 5150
XP professional sp3
3ghz intel pentium 4
5 gb RAM
Radeon x300 SE 128mb hypermemory
direct x 9.0
creative SB live! 24-bit
160gb maxator SATA HDD
Windows 7 freezes as dots begin to come together, 2 tiny dots (red & yellow), then goes to black screen. Startup repair boots to light Microsoft logo. Won't boot from 3 recovery dvds, or reinstall, goes to same screen. Gateway DX4320, AMD Phenom II, Stock hardware
View 1 Replies View RelatedOkay so I may have buggered something up royally, but I took the CPU out of my mom's computer. Ended up dusting it out, because it was overheating. I wanted to try the phenom out in my board so I swapped them out. It is an HP pavilion a6755y se. I put an Athlon x2 in it and it wouldn't post. I took it out and put the phenom back in and now it won't boot to windows. I reformatted the entire drive and to no avail it still didn't work. I disconnected all USB's attached and I am using a PS/2 mouse and keyboard. This is really frustrating to me. It loaded the default bios settings from when I took the CMOS battery out. Had to change the Sata controller to IDE. When put on ACHI it gave me a screen full of colorful boxes that flashed and really scared me. I am very frustrated and I am wondering where I should go from here. My mom is pissed and she wants her computer back to normal conditionDunno how to flash the bios. It reads all the ram and the phenom that is in its socket so I don't think it's a hardware issue. Although, I can't get a livecd to run for the life of me. I dunno what I have done, but I would like to fix it asap even if it needs new parts. It did take quite a bit of force to get the heatsink off the cpu when I was dusting
View 3 Replies View RelatedSo I just did a new custom built comp and got Windows 7 Professional for it. I burnt it to a DVD from the ISO I got from the Microsoft Store. It would freeze at the Starting Windows screen just after the 4 dots converged into the logo.
Things I've tried:
-One stick of RAM
-Installed on same HDD on another computer rig (Booted fine until I brought it back to my new rig. Then it wouldn't boot on neither)
-Memtest
-USB Boot installer
I also have all the unneeded peripherals out.
Rig:
Z68XP-UD3 (Using onboard VGA until 7 is working then its a Asus GTX 560 Ti)
1 4 GB Corsair Vengence 1600 MHZ. (Took the second out)
I5 2500K 3.3 GHz(Stock)
600W OCZ MODX Stream Pro
1 TB Western Digital Black HDD
I am helping out a friend by re-installing Windows 7 on his laptop. Unfortunately the laptop had been infected beyond repair by a virus/malware and would not boot past bios.When installing Windows 7 x32, I make it to the "Setup is starting..." screen and it does not continue. It is not the disk as I have used the same one to install it on my laptop. The laptop is a Dell Inspiron 1545 with 4gb of ram and 500gb HDD space.
View 1 Replies View RelatedI just finished building my computer the other day and installed Windows 7 Ultimate 64 bit edition. The install went great and the computer is amazingly fast, but I am less than impressed with the boot time. I have windows installed on two Corsair Force GT 60 GB Solid State Drives in RAID 0 configuration. The motherboard is a GIGABYTE G1. Sniper and the processor is an i7 990X. As I said, I am very impressed with the performance once the computer is on, but it takes ages to get there. I had some trouble with it stalling at the "Verifying DMI Pool Data..." for about 30 seconds each boot. That seems to have been fixed when I cleared the board and reconfigured BIOS. The problem I am having now is that when Windows begins to load, it says "Starting Windows" (right before the logo flies in). It will sit at that screen for over a minute before it starts to animate. It only takes about 5 seconds to load after the animation starts. No problems after that. It does change depending on the BIOS settings. It did not always do this. I have been messing with them so much to try to isolate what's causing it but I cannot.
View 3 Replies View Relatedthis happens all the time now and becomeing annoying . I have window 7 , IE it happens on my laptop .
View 2 Replies View RelatedLast night, my laptop randomly shut itself off. When I tried to restart it, I get to the Windows Loading screen and a line of color moves across the top of the screen and freezes in the top right. I tried pulling the battery and starting up, starting up on just battery power, re-seating the hard drive, re-seating the RAM, pulling one DIMM and then the other and starting up that way. All of them have the same result. I ran everything in the automatic startup repair, still have the problem. Trying to run chkdsk and sfc from startup repair said I was pending a reboot for something and it couldn't run. Tried to go into safe mode with networking and it hangs after reporting halmacpi (I think).
I pulled the hard drive and connected it to my desktop, I could see everything and am currently backing up 100GB of data, so it doesn't appear to be a problem with the hard drive. My next thought was to go into the repair console and see what I can do, but it's a Dell that came with Vista and a free download of 7 so I don't have any media unless I borrow a disk from work.System is a Dell E5500, Core 2 Duo P8600 with 3GB RAM.I did go through some old posts about similar sounding problems, but since they all appeared to relate to desktops, I wanted to post fresh.
running Windows 7 Ultimate, all updates installed, and Windows freezes at the Starting Windows screen quite often. The solution is to restart the computer, and it will always boot up successfully the 2nd timed say this happens for at least a third of startups, if not half. I have tried anything to fix it, but sitting at work with a minute to spare, and thought d ask if this was a common issue with an easy solution. If not, is there some log file I can check to see what going on?
View 5 Replies View RelatedAbout week ago my computer started freezing and rebooting and then hangs at bios splash screen (will stay there with nothing happening for hours if u let it) until you reboot it than it comes back fine until it does it again. The only thing I noticed is if the machine is off for a while it takes a lot longer for it to happen, If you restart it it last around 15 -20 mins.
1) Updated all drivers and checked device manger for errors.
2) checked and defragged drive C: drive (ssd)
3) checked both for events and dmp files (nothing ) made sure reporting was on
3) Ran windows mem check froze twice while testing once with both strips and once with only one strip installed
4) replaced ram
OS Windows 7 Ultimate (x64) Service Pack 1 (build 7601)
MOTHERBD Gigabyte Technology Co., Ltd. P55A-UD3
PROCESSOR 2.93 gigahertz Intel Core i7 K 875
COOLING DUAL FAN H50 LIQUID CLOSED LOOP
[code]....
I recently purchased a Dell XPS 15 (l521x) that came with Windows 8. The system boots from the hard drive through UEFI by default, so I think the hard drive is already GPT. I am attempting to install Windows 7 from a UEFI bootable USB. The system goes through the 'copying files' phase and then goes to the Starting Windows screen. As the colored dots of the Windows logo are circling, the system freezes. Can someone help me fix this problem? The following are the steps I took in order to install Windows 7:
- Formatted a brand new 4GB USB drive to FAT32
- Downloaded Windows 7 ISO (I have a key)
- Extracted ISO files to USB
- Made adjustments so that USB is UEFI bootable (efi/boot/bootx64.efi)
- In BIOS, set SATA Operation to AHCI and disabled Secure Boot
- Select USB drive from UEFI boot menu
heres some of the problems my computer has had:
- Frequent hangs and freezes
- Frequent BSoDs
- Had a few encounters where the computer wouldnt start up and have a long continuous beep
- I don't know how to exactly describe this, but it's like halfway through using the computer, the screen turns black like when I just on the monitor without booting the com.
System Specs
Windows 7 x64 OEM
Acer Predator G5900
Windows 7 Home Premium 64bit (6.1, Build 7601)
Intel(R) Core(TM) i7 CPU 870 @ 2.93GHz (8 CPUs), ~2.9GHz
6144MB RAM
NVIDIA GeForce GT 330
Realtek High Definition Audio
Acer S231HL(Analog)
1920 x 1080
OK, trying to put windows 7 on a motion m1300 tablet. 1gig ram 1ghz cpu and 60gb hard drive. due to the bios being limiting install from xp desktop is impossible, so using an external disk drive i am trying to do a clean install, but it just stops at setup is starting, i know that seven will run on these, seen it with my own eyes, but i cannot get setup past this part.i have a feeling its the graphics driver, but getting into device manager from the language screen/ click here to install screen hasnt worked. its not in the system32 folder and so i dont know where to lookedit: before its asked, yes the disk is good, and i cant use a usb because the bios wont alow it. also the bios are up to date
View 8 Replies View RelatedI recently got a PC that my office was getting rid of. The PC was in great shape and I was told it worked fine when they gave it to me. They ripped out the hard drive and gave me the machine. As soon as I got it, I put a brand new 2Tb Seagate HDD in. I also replaced the existing RAM (2x1Gb sticks) with 2x 2Gb sticks with the memory speed to match my motherboard. Finally I swapped out the ATI Radeon HD2900XT with a Nvidia Geforce GTX 460. There was a sound card (PCI) I removed as well as a redundant firewire port I unhooked from the Mobo. I then booted and peformed a fresh install of Windows 7 32bit Pro. Everything seemed to be going fine... until I tried to shut down. Windows would freeze on the Shutting Down screen. I mean freeze because the spinning circle would stop and the entire machine was unresponsive.
I read online that pre-Service Pack 1 Windows 7 didn't like multi-core processers and would have issues shutting down, so I updated to SP1 (along with a bunch of other updates). Now when I try to shut down, the Shutting Down screen disappears and the signal to the monitor ends, however the machine stays on. I can hear the fans running and see the lights to the PCI cards still on. Once again I have no option but to hold the power button until it shuts down. One extra note I double checked every driver and they are all up to day. Also when I boot in Safe Mode the PC shuts down fine and I have no problem restarting, just shutting down...
I recently built a computer, and tried to install Windows 7 OEM on it, but it gets stuck at the screen where it says starting windows and the logo appears. The logo gets smaller and larger. I've been told it might be something with the RAM, but tested it out and that's not the problem.
View 2 Replies View RelatedWhen I boot up Windows 7 it gets to the "Starting Windows" screen which includes the Windows Logo with some animation. Once there it just hangs for about 5 minutes, then starts normally.I have Home Premium, 64 Bit, Dell XPS, Intel i7, 6BG of memory. I have several peripherals connected directly to it: Display, USB External Drive, Webcam, Bluetooth adapter.I tested booting in Safe Mode and it was very fast with no delay.I don't restart Windows 7 often so not 100% sure of when this really began. After the install booting up was very very fast. So this happened over the last month or so.The only hardware item I would mention is a Realtek card/usb reader which is built in to my unit as part of it. After Win 7 install it did not work at all and it took quite a while including working with Dell to finally track down the appropriate drivers. Now the unit works fine but I believe the problem began around that incident.Prior to uninstall or disabling the item I just wanted to check and see if this problem has been seen and make sure I am not going to do something to simply create a new problem. Also, since it was so difficult to finally get this Card Reader up and running I am concerned about just uninstalling it.
View 9 Replies View Relatedtion-issue for more info on that. Anyway I am past that point and windows is up and running fine except for one issue. It's my dad's laptop and he always thinks he can fix issues himself, one day when he had vista about 3 or so months ago he was having some boot issues, so he went inside bios and I believe changed some things around, he really has no idea. I addressed the issue but ever since he made changed his computer takes an incredibly long time to boot up, could this be something he changed in bios? On windows 7 it hangs on Starting Windows and with Vista it did it at basically the same place when the windows logo first appears with the loading bar.
View 1 Replies View RelatedMy old HDD was fried so I decided to use my External HDD to boot off. Afterreformatting the drive I have installed it into my laptop and have attempted to install Windows 7 64bit and its all going great until after the starting windows screen and then it just turns black with the cursor. What I have tried so far....- I have reset the BIOS to defalt-Cleared the CMOS- Checked the RAM (even left 1 2gig stick in and tried that?)
View 1 Replies View RelatedSo after managing to get windows to repair itself: Boot Manager missing. I restarted the computer and now it hangs on "Starting Windows". This happens when trying to boot from CD/ DVD and the HDD. My Windows 7 install disk has no scratches and I can load it in another computer. Also I can boot off other CDs (like Linux perfectly).
View 9 Replies View RelatedI refuse to believe my 500g Sata Hard drive that has over 400gs of file and information, is all now magically a paper weight. No Physical damage has happened to the Drive at all. This is the Issue:Originally Half of the Drive was Encrypted with True Crypt and the other Half was the System Drive((C drive 50g)) and a "general" Drive/ ((175gigs)). The Problem started when some odd way it seems My Encrypted drive become corrupted to the point it would no longer easily mount. It would take 4~5Min's to mount as opposed to the normal 4~5 seconds.What happens when it did mount, The Drive was not working correctly. I couldn't access my files on that drive at all. Not only that, While it seemed like it did Mount the True Crypt Drive, my entire CPU became Non responsive. I couldn't do anything. I was unable to click on anything on the desktop, bring up task manager or even ctrl+alt+del to log off or anything. It was like it was frozen but I was only able to move the mouse...I waited a while((15~20Min's)) and went to restart the CPU by holding the power button.
Now When ever I try to load or boot from that Hard drive...Nothing Happens....It hangs at the "starting Windows" screen. I have windows 7-64bit ultimate. I tried to load from the Win 7 disk, and it hangs at a blank Screen. When I tried to use the repair feature of the Win Xp service pack 2((Remember windows XP *_*??))It hangs at analyzing the Hard drive "47850 asapii at 0 at 0 something something"..When I try to use the advance options of the Windows 7 boot, Safe mode of all types hangs at lading the drivers, Last Known good Configuration hangs at starting windows. Its Like part of the HDD doesn't want to load for anything in the world . And When I have mentioned Hangs I mean it sits there for 1~2 hours and nothing has changed.
I have ideas in my head But I don't even Know if they are possible. Oh Oh..at when I try to Load the HDD by having a back up 40g hard drive be the main booter it STILL hangs at the starting windows screen. I know its sometimes suggested to try it HDD in another CPU but if its not the main Boot Drive is that the same thing? Really don't have any Mobos that have Sata Slots for me to try that out on.I'm praying a simple chkdsk would Solve everything But there's no way I can Issue that Command. My Question(s) are:s there a Way to force the CPU to do a chkdsk command pre boot?Is there a way to have the HDD disabled at start up and enable it during the back up drives desktop((Via check for hardware changes or the "Manage" feature by right clicking computer from the start menu
I am building a computer for my parents and, after reaching the "starting windows" screen and the logo popping up, it hangs. Before this happened I was able to reach the configuration screen after that, but the hard-drive was connected incorrectly. After I connected it right, it started freezing. Here are my specs:
Intel Pentium G850 2.9GHz Dual Core processor Radeon HD 6670 BIOSTAR H61MLB LGA 1155 Micro ATX motherboard 8gb G.SKILL 1333 MHz RAM Western Digital Caviar Blue 500gb 7200 RPM hard drive RAIDMAX 450W power supply LITE-ON blu-ray combo disc drive Creative Sound Blaster audio card Windows 7 Home Premium