Laptop Loads Fine When Started But As Soon As Get The Windows 4 Dots Turning It Is A Blank Screen
Nov 2, 2012My Laptop loads fine when started but as soon as I get the windows 4 Dots turning it is a Blank Screen.
View 1 Replies
ADVERTISEMENT
After Login Laptop Screen Is Blank And It Loads The Desktop After 20 Minute?
Dec 16, 2011my hp laptop screen loads the desktop after 20 minitus..whats the problem??os is windows 7 home premium and 64 bit
View 1 Replies View RelatedWhen Turning Off Computer & Turning It Back On Again Screen Is Blank
Dec 31, 2012when my computer goes to sleep after it's on for a while when I move the mouse to get the screen back up it shows the backround no icons or anything to click. Same if I turn it off and turn it back on. I have to turn it off and on many times then go to safe mode and shut down then turn it on again for it to work. Just now I had to turn it on/off 4 times for it to show the icons and task bar. Usually it is left blank with nothing to click having no choice but to turn it off. Norton says no viruses. My computer is HP with windows 7. I bought it in 2011.
View 1 Replies View RelatedBlank Screen After Windows 7 Loads?
Jul 18, 2012I opened up my PC to move the front audio cable so that it wasn't sitting on the graphics card (was causing EM interference).When I tried to reboot, my computer now gets to the windows loading screen, then stops outputting video - so the monitor goes blank and eventually turns off. Windows continues to load in the background as I can hear the startup sound play.
Computer Setup:
Gigabyte GA-EX38-DS4 Motherboard
Intel Core 2 Duo E8400 CPU
Gigabyte 670 GTX Factory OC GFX Card
4GB RAM (I think XMS2)
500GB Samsung Spinpoint F3 7200rpm HDD
Corsair 650W modular PSU
Linksys PCIE wireless card (can't remember model)
Things I have tried:
1) Booting into safe mode (works fine, can view the desktop etc.)
2) Booting into low resolution mode (doesn't work, same issue)
3) Booting into safe mode, un-installing the graphics card, booting into normal mode and reinstalling drivers for graphics card (doesn't work, same issue)
4) Trying a different PCI-E slot (doesn't work, same issue)
5) Trying a different output on the graphics card (doesn't work, same issue)
6) Hard CMOS reset (doesn't work, same issue)
7) Trying a different graphics card (even worse, didn't get any video out even at BIOS screen - can't guarantee card is working as I don't have a second machine to test with but it was working the last time I used it a couple of months ago. Second card was ATI rather than Nvidia so shouldn't be using same drivers).
Things I intend to try but haven't had time:
1) Plugging into a different monitor (heard some people mentioning it may be to do with the monitor drivers not reporting max screen settings properly, I could find any windows 7 x64 drivers for my monitor as its so old but I do have a TV I can test with)
Formatted Windows 7 Loads Shows Windows 7 Logo And Screen Blank With Cursor
Oct 28, 2011Formatted Windows 7 loads shows Win 7 Logo and Screen blank with cursor
I have an Acer laptop 4551, got hit by nasty viruses and on top no restore intact.
I formatted the hard drive which gave me an error 83% and stopped. Today I turned on laptop to install fresh genuine Windows 7, I popped in the DVD and done everything in BIOS selected Boot from CD. Everything was Ok I hit enter to Continue then comes the Windows 7 logo and after that a blank black screen with Cursor, that's it! I done that some 5/6 times but no luck.
Windows 7 Loads Fine But None Applications Will Load Up?
Sep 29, 2011I have a weird situation: Just a normal day working on my pc while it messages me, system rebooting. It reboots without any errors. I log back into my system,everything seems fine. I notticed on my taskbar none of my applications loaded.Usually, MSN, my vid card, winamp...icons are loaded up and icons are in taskbar but not there! I performed many actions to no avail.System restore, safemode boot, selective services boot, sfc /scannow and so on.I checked in Event viewer and see 5-6 service that did not responde to the start or control in a timely fashion. Ex: acrobat, asus, bonjour, apple.... Got one I dint like: The server {06622D85-6856-4460-8DE1-A81921B41C4B} did not register with DCOM within the required timeout.When i click on any applications mostly non-MS apps nothing happens. Not even the services starts up in task man. I tried to open the service lets say, Steam client and get the Timeout error right away.
View 7 Replies View RelatedWindows 7 Pro Loads Fine But Freezes At Any Program Launch
Dec 26, 2012running in safe mode.anytime a try to run win7 pro 64bit any click freezes windows.have run all the troubleshooters, the one that i cant resolve is windows update. it has "probable corrupted files"..it (win update) wont run in safe mode.
View 9 Replies View RelatedWindows 7 64 Bit Suddenly Started Running Slow - RAM Registering Fine
Apr 23, 2011All of a sudden on my Windows 7 ultimate 64bit, my Windows started to run so slow to the point where I can basically not even use it. All the stats show my RAM registering fine(4gb) and I just can't find what the problem will be. In its normal mode, it will take around 20min just to get to the front screen and is super slow when it comes to opening programs as well. It seems to run safe mode fine though, with speeds that I am used to.
View 3 Replies View RelatedIE Error - Loads Blank Page
Nov 12, 2012Running Windows 7 o/s. Internet Explorer now loads a "Blank Page". Have removed several malware which highjacked IE. Used Malwarebytes, CCleaner, Revouninstaller programs. Believed to have cleaned Registry correctly.
View 10 Replies View RelatedWhite Screen On Laptop But External Is Fine?
Dec 18, 2011My windows 7 professional 32bit on my laptop has a problem. Everytime I turn it on, my laptop screen is white (and fades in some hints of black) and nothing shows up. However, sometimes I am able to get a display on an external monitor.
Before my computer loads my desktop it does a startup repair. What ends up happening is that it does a system restore and my computer is able to boot up normally on my external monitor (laptop screen still white). Once everything loads, my computer automatically looks for and installs a VGA controller driver (at this point I am suspecting something may be wrong with my graphics card because I no longer have the windows aero theme).
Once the VGA drivers are installed, my computer says it has to restart so that changes can be made. After the restart, everything is back to normal with my laptop screen working again and now I have the aero theme again. What is the problem? I've been trying to fix this for weeks. It should be noted that I can't always get the display onto my external so I have to keep on force restarting (holding onto the power button) until I can get it on the external.
I installed a new driver for my graphics card and it hasn't fixed the problem. I know there is a virus on my computer (file is tdx.sys). I am going to replace that file with a new one following some instructions from another forum but I don't want to do that yet because I am currently writing exams and not much of a tech savvy person. I don't want to mess around with system files until at least after my exams so I can back up everything.
Starting Windows Screen Then 2 Colored Dots Then Freezes
Feb 7, 2012Windows 7 freezes as dots begin to come together, 2 tiny dots (red & yellow), then goes to black screen. Startup repair boots to light Microsoft logo. Won't boot from 3 recovery dvds, or reinstall, goes to same screen. Gateway DX4320, AMD Phenom II, Stock hardware
View 1 Replies View RelatedRestart Windows 7 - Computer Freezes With Three Colored Dots On Screen
Oct 20, 2011My Gateway runs great until a restart is requested by me or a program. A few days ago, it would restart just fine. When I select Restart, the computer appears to shut down fine, it beeps to restart, the Windows 7 screen begins to open but it freezes with three colored dots on the screen. It always stops in exactly the same place.
If I kill power, then boot again I get an offer for Windows to repair itself. If I let it, it cannot repair. If I select Boot Windows Normally, all is well. Except for this one problem, things are really running well. Odd. I've run Chkdsk, SFC/ SCANNOW, and PC Pitstop Optimize3. Nothing finds a problem or fixes anything.
System Info Utility version 1.0.0.1
OS Version: Microsoft Windows 7 Home Premium , Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i7 CPU 965 @ 3.20GHz, Intel64 Family 6 Model 26 Stepping 4
Processor Count: 8
RAM: 12279 Mb
Graphics Card: ATI Radeon HD 4870 X2 , 1024 Mb
Hard Drives: C: Total - 953766 MB, Free - 875155 MB; D: Total - 953866 MB, Free - 824991 MB;
Motherboard: Gateway, TBGM01, , U00B092001094
Antivirus: Lavasoft Ad-Watch Live! Anti-Virus, Disabled
Avast/Comodo
HP Laptop Stuck On Loading Windows 7 - Shows Blank Screen
Jan 29, 2012I bought a hp laptop about a year ago and have been having a problem for the last couple days. I have windows 7 and when I go to start the laptop up it shows the HP screen then goes to the windows screen like its loading but then goes back to the hp logo and is stuck. I ran a HDD test and memory test those came back good. I tried to go into safe mode it acts like it loading then shows a blank screen. I try to do a system recovery and system restore the screen stays blank. I also took the battery out and press the power button down but that hasn't work. It's no longer under warrenty.
View 3 Replies View RelatedAfter Windows 7 Upgrade, System Goes To Blank Screen (Vaio Laptop)?
Feb 18, 2012An upgrade installed and now the system hangs (could be something else, I don't know, but upgrade installed right before hang)Vaio logo comes up, then repair or start Windows regularly - If start regularly, goes to blank screenIf repair, then the sytem goes to Startup Repair and Searches for problems for hours.Repair, and login as owner, go to system restore, choose a restore point, and click next, system hangs. Don't have a system image or a good backup (My backups always hung.Will make sure I have one from now on)Had memory checked. Did not change, blank screensafe mode hangs on black screen, low res video hangsUsing Windows 7 installation disc (borrowed from a friend), the repair option hangs on "Searching for Windows Installations..." and on the other window, I can see it found my windows installation but I can't get to it, because the "Searching for Windows Installtions..." never stops.
View 1 Replies View RelatedHP G60 Laptop Screen Goes Blank?
Jul 9, 2012I have a three year old HP laptop running Windows 7 (64 bit) that is misbehaving. It would not boot up recently, and I believe the root was heat related issues. My son likes to use it while setting on his bed - fan gets covered up and the laptop overheats. I added some large rubber feet to the bottom to improve clearance for the fan and that has helped, to a point. The laptop will boot and I can log into my son's account. After 5-10 minutes, the screen goes blank (50% grey scale, neither bright or completely dark). At that point, nothing seems to bring the screen back, so it is unusable and a hard shut down is necessary. I have cleaned it with Malware Bytes in the past and now have Microsoft Security Essentials installed, so I think/hope any virus issues have been resolved. My suspicion is that this is heat related, but exactly what is failing I do not know. Two months ago I replaced the power jack in the laptop and the power supply because of power connection problems. The battery is shot and will not hold a charge, so the laptop can not be used unless it is connected to the power supply. Since I replaced the power supply and jack, the laptop has been functioning okay. It would crash on occasion, but I attributed that to malware. I had to purge the hard drive earlier this year and restore the system because of a malware infestation.
View 3 Replies View RelatedMonitor Stays Blank When Turning It Back On
Dec 16, 2009I am going to preface this by saying that this has *nothing* to do with restoring from sleep or hibernate modes. In searching for an answer to this issue, I found way too much related to that.
My problem is simple. Occasionally (~50% of the time) when I turn the monitor back on after shutting it off, it will stay blank and not really turn back on. It makes no difference how long the monitor has been off. After turning it back on, the power light is green, indicating there is a signal, but the screen is black.
Again, the computer has not slept or hibernated. I simply shut off the monitor and later come back to turn it on. The same thing will happen occasionally if Windows shuts the monitor off after the configured time. (I did that last part as a test; I typically do not automatically shut it off.)
Specs:
OS: Windows 7 64-bit
CPU: Intel Core i7 860
MB: Asus P7P55D
Memory: 8GB - Corsair CMX6GX3M2A1600C9 (2 x 2 x 2GB)
Graphics: NVIDIA GeForce 8800 GTS 640MB
Monitor: Chimei CMV 221D
NVIDIA Drivers: 8.17.11.9562 (11/20/2009)
I originally thought it was the OS that was hung. However, I was able to go into the start menu and restart ("Start" -> "Right" -> "Right" -> "R"), so I know the OS was there responding to my commands.
Attempts to fix:
- Restart the computer. This worked.
- Shut off the power to the monitor and turn it back on. This works most of the time.
- Lock and unlock Windows. This works after a few tries.
- Hit CTRL-ALT-DEL followed by ESC. This works after a few tries.
So, I have a fairly simple work around now. So this is only a minor annoyance. Hitting CTRL-ALT-DEL then ESC does seem to work. I don't think it is a placebo because I waited 5 minutes and it did not come back, but after 2 cycles of that, it came back. I think that fixes it because it causes full screen refreshes.
Does anyone have any ideas or has anyone seen this before? The drivers are recent, but I noticed this with the clean-install Windows 7 drivers for this card as well. This is a very clean and very recent install (3 days). I never had this problem with Vista 32-bit, the same graphics card, recent drivers, but different CPU/motherboard/memory.
Colored Dots And Objects At Top Of Screen
Nov 6, 2009When my computer finishes starting up, it ends with what looks like blobs of colored pixels in a line at the top of my screen. This happened for the first time tonight and I have no clue what happened. I took out my video card and plugged my monitor into the mother boards vga slot. Same result. Then i used a HDMI cable from my monitor to my motherboards HDMI slot. Still, with the same result. I plugged my Xbox 360 up to monitor with the HDMI cable and it looks fine so it's not on the monitor's end.
When the computer is loading, the screen stays black. Then when my desktop would normally show is when the pixels show up and the rest of the screen is black.
Laptop Screen Goes White Blank
May 28, 2011When using my dell laptop, the screen will get quick tiny color lines and then go white blank and the only way to get it back up is to close my computer and wait about 2 minutes and sometimes I have to do this several times. This usually only happens if my computer is not plugged but also happens when it is just not as often.
View 1 Replies View RelatedBlank Screen Of Laptop On Start Up?
Aug 4, 2012when i start my laptop the screen is not showing any thing if shows then some time blank and lining
View 1 Replies View RelatedLaptop Shut Off Then Rebooted To A Blank Screen?
Dec 19, 2012my laptop shut off then rebooted to a blank screen with invalid partition table at the top.It will go to start up screen,and get to bios but other than that nothing.
View 1 Replies View RelatedSamsung Laptop Boot Up But Screen Is Blank
Oct 29, 2012It worked ok up to now apart from many times when I clicked the back button it would not bring the privious page instead, it would bring blank page and then i had to close and start from beginning. today it worked ok until an hour ago, when the screen suddenly turned blank. i tried to shut down from the on/off button but the screen still blank and no button would have any effect on the screen.
View 2 Replies View RelatedDell Laptop Starts Sometimes With Blank Screen?
Jan 9, 2012i also found the same problem in my dell laptop studio. i installed, my laptop came with window vista , then i installed win 7 ultimate OS, after that i reinstalled win 7 pro OS. and now i am facing the same problem. i.e blank screen on start up sometimes. can any one please tell me that how should i reinstall the my first operating i.e window vista and when i bought laptop i got it without the cd of windows
View 2 Replies View RelatedMy Laptop Doesn't Boot - The Log In Screen Appears To Be Blank?
Dec 16, 2011I just installed NFS the Run and Battlefield 3 on my windows 7 Dell XPS, the game showed me an error and asked me to download driver version 259.38 from the nvidia website, I did so and the game started working, but not properly. Anyway, so I restarted my laptop and after the 'starting windows' screen, it went blank, the blue log in screen never came (i could hear the tune though).Then i restored my system to a previous date (thereby uninstalling the new driver) and now the system is working but the game is showing the same error again
View 1 Replies View RelatedHp Laptop Core I5 Setting If Suddenly Screen Become Blank
Feb 11, 2013my labtop hp core 5i is screen suddenly become balank now what should i do
View 1 Replies View RelatedAfter Windows Loads Get Blue-screen
Apr 18, 2012With mouse in the middle and cannot go any further.
View 7 Replies View RelatedWindows 7 Loads To A Black Screen?
Dec 18, 2011I built my PC in november of 2010. These are the components:Motherboard - ASRock M3A770DE AM3 AMD 770 ATX AMD MotherboardHard drive - Western Digital Caviar Blue WD2500AAKS 250GB 7200 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive -Bare Driveprocessor - AMD Athlon II X3 440 Rana 3.0GHz Socket AM3 95W Triple-Core Desktop Processor ADX440WFGIBOXgraphics - PNY VCGGTX570XPB GeForce GTX 570 (Fermi) 1280MB 320-bit GDDR5 PCI Express 2.0 x16 HDCP Ready SLI Support Video Cardpower supply - 1 x Rosewill LIGHTNING Series LIGHTNING-1000 1000WATX12V/EPS12V 80 PLUS GOLD Certified Modular Active-PFC Power Supplymemory - 2 x Crucial 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10600) Desktop Memory Model CT2KIT51264BA1339The monitor is a 1920 x 1080 LED 23 inch monitorI just bought windows 7 from best buy and I installed it and it was working just fine until I installed the drivers that came with the motherboard. After I installed the drivers and rebooted the computer it would load to a black screen and stay black. I get a windows 7 logo and a progress bar and then the screen goes black right when it is supposed to go to a login screen. I decided to reinstall the operating system again and after the second install it worked fine until I installed the drivers for the graphics card.
View 7 Replies View RelatedInstalls Fine, Runs Fine, Reboots..not Fine
May 20, 2009so i finally decided to install Windows 7 x86 - everything went well - put all the standard stuff on there etc - i rebooted many times because of installations and updates
on my last reboot it just got stock in the bios screen (verifying dmi pool data..success! etc)
so i rebooted, same thing, took the disc out, same thing - turned off boot devices same thing
tried to use window's useless repair tools (whatever happened to repair install?) which didn't help - so i decided to format and reinstall - then it says it was unable to do that (partition error or something)
the annoying this is...is that this EXACT..i mean EXACT same thing happened when i installed vista sp1 from scratch - this happened - and to fix it i had to leave my pc open overnight with the hard drive cables all unplugged..in the morning with my fingers crossed i tried the installation again - and it worked.
my d: always disappears (single hard disk sata 233gig (250)) - sometimes it'll vanish from my computer and stuff - but this can't be the problem because the d: is a single drive on its own - my c: is a25gig partition from my e: - so it's completely unrelated.
does it matter how i replug the sata cables (2 of them) into the mother board? - they're both being recognised anyway
this is really annoying though - mostly because there isn't really an explanation - and because this random stuff always happens to my pc! - is it my hard drive because that's the only thing that would half- make sense
Blue Screen On After Desktop Loads?
Sep 19, 2011I'm getting an inconsistant BSOD just after my desktop loads from a bootup. Meaning, sometimes it BSODs and sometimes not. I read the minidump everytime and it shows the same information. This is what it shows.
PAGE_FAULT_IN_NONPAGED_AREA
Caused by driver: win32k.sys
Caused by address: win32k.sys+2517af
Crash address: ntoskrnl.exe+7cc40
I just ran a Chkdsk /r but nothing was found. I'm thinking it may be a memory error?
Laptop Started The Windows 7 Installation Again?
Mar 8, 2011Im trying to install new Windows 7 on HP Pavilion laptop but,Windows start the Windows installation again after finished installation process.-Disk is formated, no partitions (NTFS).boot priority settings: 1. CD/DVD drive
View 5 Replies View RelatedUser Login Loads Up With Black Screen
Sep 15, 2010Every time I make a new User and log in it loads up with a black screen and the task bar and says that the system as loaded the default profile. This even happens if I log on as the system admin. My original profile loads fine but nothing else. I think It may be because the folder that holds all the basic information to make a new user profile has been deleted from my Users folder. Is there anyway of fixing this? Prohapps a place where I can download and replace that folder? I am using windows 7 ultimate 64bit. System restore has already been tried but the folder was deleted too far back to recover by that method.
View 3 Replies View RelatedMonitor Loads Up But Screen Keep Flashing / Blinking
Aug 6, 2012When I first boot up my desktop computer or let is set for any length of time the monitor loads up but the screen keep flashing/blinking kinda like light in it.Usually after 2 minutes or so it stope so I can continue.
View 2 Replies View Related