Windows 7 Loads Fine But None Applications Will Load Up?
Sep 29, 2011
I have a weird situation: Just a normal day working on my pc while it messages me, system rebooting. It reboots without any errors. I log back into my system,everything seems fine. I notticed on my taskbar none of my applications loaded.Usually, MSN, my vid card, winamp...icons are loaded up and icons are in taskbar but not there! I performed many actions to no avail.System restore, safemode boot, selective services boot, sfc /scannow and so on.I checked in Event viewer and see 5-6 service that did not responde to the start or control in a timely fashion. Ex: acrobat, asus, bonjour, apple.... Got one I dint like: The server {06622D85-6856-4460-8DE1-A81921B41C4B} did not register with DCOM within the required timeout.When i click on any applications mostly non-MS apps nothing happens. Not even the services starts up in task man. I tried to open the service lets say, Steam client and get the Timeout error right away.
running in safe mode.anytime a try to run win7 pro 64bit any click freezes windows.have run all the troubleshooters, the one that i cant resolve is windows update. it has "probable corrupted files"..it (win update) wont run in safe mode.
I have a dell 545s when i have certain applications open i get a message from windows saying my computer performance is slow and when i'm using firefox i have a lot of tabs open the browser pauses when i click on an open tab and it freezes
On some nights my computer works perfectly fine, I can surf the net without incident, open applications, play games etc and everything appears to be fine.Then there are the other nights (which are increasing in frequency) where the computer boots up fine but then I run into application after application which refuses to load - I will click on the application and the "loading" icon will appear on screen and then just stay there.The only way out is to cntrl-alt-delete and bring up task manager, but this can also then refuse to either load or - if it does - will not respond when I click on the first offending application in an attempt to close that down.I also noticed on the last few nights that when trying to start a particular game clicking on the icon would appear to have activated nothing - yet when I attempted to start it again I would get a message saying that I couldn't start the game until the one I had running had been shut down - but nothing appeared to be running.My computer was built in January of this year. I have regularly run disk cleanups etc and run virus checks at least once a week and nothing shows up.
I have a problem on my iMac 2011 (20go ram) under windows7.Whan I start my computer all is fine. The network is fluid, I can go on the internet, on my server...After loading two 3dsmax sessions, one photoshop sessions and transfert some large files (near 1go) -> my network goes wrong.The browse/save/open/transfert operation on any application takes a loooooooong time to start (maybe 20-30s)
If I connect to my work VPN, then IE refuses to load any pages (inside the work network or outside). It doesn't even appear to try, just goes immediately to "Internet Explorer cannot display this page." I was able to connect to the computer with teamviewer remotely, name resolution worked properly, I was able to ping the web server etc. all fine, even brought the page up in FF and Chrome with no problems. I turned off all add-ins and restarted IE, same deal. If I disconnect from the VPN then IE works fine again. I was running IE9, I tried uninstalling it but having the same issue with IE8.
It loads fine on my tablet, it loads fine on my phone, and it loads fine on my old PC sitting right next to this one. But on this one it hangs and I eventually get this error: "Error 101 (net::ERR_CONNECTION_RESET): The connection was reset."So the things I have done so far to try and fix it are;Virus scanSpyware scanMalware scanipconfig /release /flushdns /renewCC CleanerManual change to Google's open dhcp serverMultiple router resest/PC restarts3 different web browserschecked my "hosts" file to make sure it didn't somehow get redirected in thereIf I use a proxy site it works fine, but I cannot get it to come up any other way. And the website will not allow connecting directly by IP address as I tried that also and it doesn't work even on systems that will load it properly.
so i finally decided to install Windows 7 x86 - everything went well - put all the standard stuff on there etc - i rebooted many times because of installations and updates
on my last reboot it just got stock in the bios screen (verifying dmi pool data..success! etc)
so i rebooted, same thing, took the disc out, same thing - turned off boot devices same thing
tried to use window's useless repair tools (whatever happened to repair install?) which didn't help - so i decided to format and reinstall - then it says it was unable to do that (partition error or something)
the annoying this is...is that this EXACT..i mean EXACT same thing happened when i installed vista sp1 from scratch - this happened - and to fix it i had to leave my pc open overnight with the hard drive cables all unplugged..in the morning with my fingers crossed i tried the installation again - and it worked.
my d: always disappears (single hard disk sata 233gig (250)) - sometimes it'll vanish from my computer and stuff - but this can't be the problem because the d: is a single drive on its own - my c: is a25gig partition from my e: - so it's completely unrelated.
does it matter how i replug the sata cables (2 of them) into the mother board? - they're both being recognised anyway
this is really annoying though - mostly because there isn't really an explanation - and because this random stuff always happens to my pc! - is it my hard drive because that's the only thing that would half- make sense
Ran my Uniblue application to update drivers; after that cannot run mouse or keyboard once Windows loads (I have tried different USB ports--none seem to work).
Today I clicked on Internet Explorer and tried a Google Search. I only did one left-click of my mouse each time.Multple windows appeared and continued to propagate non-stop, until I closed all windows. Does anyone know what could be causing that? I know that I could do a restore to yesterday and the problem would probably go away, but I would like to know the cause of it.
I am running: Windows 7 64bit On: Acer Aspire 5750 laptop
For a couple months my computer has been locking up at random intervals for several seconds each time. I got no error messages and each time it came back acting fine, so I just assumed I had too much running. Now, I'm not so sure it wasn't the HD failing, because...
Last week, I noticed the shield on the shutdown button indicating windows needed to run an update. I closed out of everything and pushed the button to shutdown/install updates. The computer immediately crashed almost as if I had held down the power button. When I attempted to restart it, my only 2 options were to start normally or launch repair mode. Normal didn't work, so I launched repair. Repair ran for close to 4 days. In the first 36 hours it asked to be restarted twice, after that it just kept running until finally I gave up and shut it down with the power button.
Like a moron, I do not have a recent backup of my files and really wish they could still be saved.
Since then:Tried to rescue files with Umbutu boot stick- error said it could not mount to drive. Tried to launch safe mode with command prompt via F8- system went back into repair mode instead. Tried to launch to last known good configuration via F8- system went back to repair mode, again. Tried to launch via Windows Boot Disk- the screen it gave me was not the same screen as the screenshots on the forums suggested I should get. My screen was an Acer logo with 3 options, but only 2 I could chose and both promised to wipe my data. One was to repair windows and the other was to replace it. I chose neither in an effort to not loose my data. From other peoples screen shots it looks like this disk should give me many more options, including one for command prompt. Tried Windows boot disk again, disk would not load this time. Now I'm stuck! How can I check for HD failure if I can't get a command prompt or OS? It seems like everything I try goes right back into the same repair mode that ran for 4 days and did nothing good and forces me to shut down with power button despite how bad that is to do.
Mysteriously, the audiodg.exe service seems not to run in the active processes as a result of which I could get sound. When I try to run the process through new task option , it loads up and immediately disappears.What do I do? Other audio services and everything seems fine. It used to run on same machine with the process on.
I have a home build pc msi mother board p45 neo, 2gb corsair ram, nvida geforce 9800, wd 400 hd & WD 160. After I shut down and restarted PC it states windows is staring but never loads.I tried to go in safe mode trying all their options but nothing happens, I can not go into safe mode.I also tried booting from the cd but still it will not load.
I have search several internet boards and have tried everything, so while searching the boards from another computer it finally went into the option for sytem restore or repair I hit system repair and it ran thru a few things and i neglected to copy down the results but i believe it said something about boot config error. hit repair I hit repair and it said to click finish and restart still nothing.
I'm setting up my system drive with 3 operating systems:
1) Windows 7 64 bit (for home use) 2) Win XP (for legacy programs) 3) Windows 7 64 bit (for work use)
...in that order on the hard drive. Rather than using Windows own boot manager, I'm using the open source GAG boot manager (which, like lots of third party boot managers, runs before any OS loads so you can pick which OS to run - and then hides the other OS's and their entire partitions until you reboot.) I've done this sort of thing with multiple WinXP loads before, no issues. In fact, this very hard disk used to have three WinXp loads on it (in position 1 and 3 above). I formatted those partitions and replaced them with the Win7 loads, which is when the problem started.Everything worked fine until I added the SECOND load of Win 7 (third on the hard drive, as above). It installs properly, but when I try to run it, it hangs on the "Starting Windows..." screen (and the spinning windows logo just stays spinning infinitely).if I then immediately reboot and run the FIRST load of Windows 7 (which was hidden, worked fine before, and lives on its own separate partition), I get a screen right away saying a problem happened last time I ran it! Which isn't true - the problem happened when I just ran the SECOND load of Windows 7, not the first! Remember, these Win7 loads are totally separate. But for some reason, it thinks there was a problem. It even asks me if I want to enter repair mode. Spooky...Anyway, I do NOT choose to repair and instead just say "run normally". And everything then boots fine. (Of course!) And sure enough, if I shut down and simply choose to run that same first load of Win7 a second time, it again works with no problems reported. BUT... if I then proceed to run the SECOND load of Windows 7, it again hangs on the "Starting Windows..." screen, and - you guessed it - if then try to run the FIRST copy of Win7, it will again report it had a problem last time it was loaded. Which starts the whole thing over again....
I built my PC in november of 2010. These are the components:Motherboard - ASRock M3A770DE AM3 AMD 770 ATX AMD MotherboardHard drive - Western Digital Caviar Blue WD2500AAKS 250GB 7200 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive -Bare Driveprocessor - AMD Athlon II X3 440 Rana 3.0GHz Socket AM3 95W Triple-Core Desktop Processor ADX440WFGIBOXgraphics - PNY VCGGTX570XPB GeForce GTX 570 (Fermi) 1280MB 320-bit GDDR5 PCI Express 2.0 x16 HDCP Ready SLI Support Video Cardpower supply - 1 x Rosewill LIGHTNING Series LIGHTNING-1000 1000WATX12V/EPS12V 80 PLUS GOLD Certified Modular Active-PFC Power Supplymemory - 2 x Crucial 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10600) Desktop Memory Model CT2KIT51264BA1339The monitor is a 1920 x 1080 LED 23 inch monitorI just bought windows 7 from best buy and I installed it and it was working just fine until I installed the drivers that came with the motherboard. After I installed the drivers and rebooted the computer it would load to a black screen and stay black. I get a windows 7 logo and a progress bar and then the screen goes black right when it is supposed to go to a login screen. I decided to reinstall the operating system again and after the second install it worked fine until I installed the drivers for the graphics card.
I opened up my PC to move the front audio cable so that it wasn't sitting on the graphics card (was causing EM interference).When I tried to reboot, my computer now gets to the windows loading screen, then stops outputting video - so the monitor goes blank and eventually turns off. Windows continues to load in the background as I can hear the startup sound play.
1) Booting into safe mode (works fine, can view the desktop etc.)
2) Booting into low resolution mode (doesn't work, same issue)
3) Booting into safe mode, un-installing the graphics card, booting into normal mode and reinstalling drivers for graphics card (doesn't work, same issue)
4) Trying a different PCI-E slot (doesn't work, same issue)
5) Trying a different output on the graphics card (doesn't work, same issue)
6) Hard CMOS reset (doesn't work, same issue)
7) Trying a different graphics card (even worse, didn't get any video out even at BIOS screen - can't guarantee card is working as I don't have a second machine to test with but it was working the last time I used it a couple of months ago. Second card was ATI rather than Nvidia so shouldn't be using same drivers).
Things I intend to try but haven't had time:
1) Plugging into a different monitor (heard some people mentioning it may be to do with the monitor drivers not reporting max screen settings properly, I could find any windows 7 x64 drivers for my monitor as its so old but I do have a TV I can test with)
Windows 7 64bit is freezing after i type in my password and hit enter.I can boot into safe mode just fine. While in safe mode, I uninstall my video card driver. This then allows me to boot back into normal win7 64bit mode. I have yet to find a video card driver that works. All of this was working 3 days ago. I know what has changed but nothing that should affect the vid card. [code]
I dont know if this is posted in the right area but I'm so desperate to get my laptop working its unreal. First it started off with my laptop crashing, I had totally forgot it needed to do a windows update and turned off my laptop in hopes that it would work properly. After that my laptop has not been working. The machine turns on and gives me two options. Start windows normally or do a repair. Upon starting windows normally, it loads so far before sending me back to the two options of start windows normally or repair. On the second time I clicked repair. My laptop then goes so far before presenting me with a blue screen that is usually the screen where my accounts are. The cursor still moves but it loads no further even after leaving it an hour. I decided to make a repair disk, hoping that the problem was because of windows. the disk loads, gives me a choice on the keyboard language then does nothing. I honestly have no idea what to do, I want to keep all the files safe on my computer as I havent backed them up and I have worked so hard on the projects.
I have been working on the problem for 2 days now and have gotten to various stages of working and not working. The issue at its worst will always BSOD when starting windows even using the various options. I have since then used the command prompt option form the install disc to run chkdsk and other repair options (fixmbr sfc /scannow) and am now able to boot into windows most of the time. Oh and sfc /scannow reports corruption but unable to fixI believe it is the work of some sort of malware but i have run updated versions of kaspersky and malwarebytes as well as rkill in an attempt to remove it but all report back that there is no malware. If that is the case then I feel like my drivers have been corrupted somehow and have replaced most of them but still get BSOD's but usually after I try to run a full security scan.
The only lead I have is the log file from sfc /scannow. Oh and most of my issues happened after running driver verifier so thats why I believe it is a corrupted driver and I recently believe that my Diablo 3 account was stolen by a keylogger but yet again using all the different security options that I have since downloaded found nothing including running avg with a linux disk at startup.Anyway Im sure i forgot to add stuff that I did but hopefuly we can figure it out i feel like my only uption is to do a repair install which i think I tried bu didnt work since my install drive is only 64GB and has 6 GB space left.
since about two weeks ago, every two times I power my laptop on, windows fails to load the my user profile and greets me with the temp user profile where I can't access my files and such. however, if I reboot after that it loads my user profile sucessfully. but if I reboot again It loads the temp profile. I scanned unsing My antivirus, and it turned up no bad results. I then tried a disk check, but it only was on for less then 5 seconds when it just said "the disk is clean." i'm not sure what to do now. any suggestions? it's really irritataing having to constantly reboot every time i turn my laptop on.
I have a really strange problem with my new desktop PC. Right when Win7 starts and the desktop appears, the PC case starts emitting a noise with a really high pitch. I tried almost everything to find out which component emits this noise (it's not the fans, nor the CPU, nor the video card, nor the hard drives). After hours no end of trying everything I could think of, I found out that the only way to stop the noise is to disable an item called "USB Input Device" from the Device Manager of Win7. I have several items called that way, but only one is causing the noise. When I do disable the device, the mouse stops working and the noise is gone entirely.
But as soon as I enable the device, or plug another USB mouse on the PC, the noise comes back. But here's the interesting thing: I found out that if I start Win7 in safe-mode, even with all services and network on, it doesn't emit the noise, and the mouse works perfectly anyeays. I even see that same device enabled in the Device Manager, but it doesn't make a sound. I cannot use Win7 in safe-mode all the time, but I also cannot use the PC without a mouse. I'm thinking on buying a PS2 mouse instead of a USB mouse and try that, but I really like both my wireless Logitechs.
After a fresh install of Windows 7 Ultimate 64-bit, I used windows update to install all the updates available, and then after restarting I install the AMD graphics drivers. Upon rebooting, the system just hangs on the Windows Loading Logo.
What I have done so far:
I have tried the 11.10 and 11.11 drivers, same effect.I tried just using the driver only and the full catalyst package, both produce the same results.I have tried installing the drivers supplied by windows, but this process fails with an error code that suggests that I already have drivers in place. I have used driver sweeper in safe made to get rid of any video drivers before trying to reinstall, but the effect is the same. After every driver install, I must reboot into safe mood and restore to a previous point to be able to boot back into the full version of windows.
Previous History:This system was working fine with the 11.10 Catalyst package before reinstalling windows.
Relevant System Specs:
OS: Windows 7 Ultimate x64 w/ SP 1 Processor: Intel Core i7 920 Motherboard: Gigabyte GA-EX58-UD4P Memory: 12gb OCZ DDR3 1600 Hard Drive: Seagate Barracuda 1.5 TB Graphics Card: ATI Radeon HD 5970 2gb PSU: Corsair CMPSU-750TX 750 watt
My Toshiba laptop was recently upgraded (clean install) of windows 7 Ultimate -64 bit. It worked perfectly fine and fast.. now it jst freezes after windows 7 loads. It starts up normally and then when all the Icons are refreshing (turn into white paper icons) it freezes along with the mouse. Can't do anything but turn off. It always happens. I can boot onto safe mode fine.
I have a windows 7 ultimate x32 installed on the C partition ... I've installed Ubuntu 11.04 on an other partition D it was ok but when I've restarted the computer it loads Windows 7 directly so I would like to know how to add Ubuntu to the boot list.
When I double click on the Bluetooth icon in the taskbar the Bluetooth Devices window comes up, the green bar loads to 99% and nothing happens, even though I have 2 turned on Bluetooth devices near the dongle. I have also tried using the software (BlueSoleil) that came with the dongle, but that doesn't work either. All the devices in the device manager are installed correctly (no unknown devices). I am using Windows 7 Premium.
Formatted Windows 7 loads shows Win 7 Logo and Screen blank with cursor
I have an Acer laptop 4551, got hit by nasty viruses and on top no restore intact. I formatted the hard drive which gave me an error 83% and stopped. Today I turned on laptop to install fresh genuine Windows 7, I popped in the DVD and done everything in BIOS selected Boot from CD. Everything was Ok I hit enter to Continue then comes the Windows 7 logo and after that a blank black screen with Cursor, that's it! I done that some 5/6 times but no luck.
I have installed windows 7 in C: drive and after than i installed windows Xp in D: drive.But now when i start my computer it automatically start windows Xp.in the C: i searched for the boot.ini it was windows xp written there also.
