Windows 7 Refuses To Load And System Repair Wont Load
Jun 25, 2012
I dont know if this is posted in the right area but I'm so desperate to get my laptop working its unreal. First it started off with my laptop crashing, I had totally forgot it needed to do a windows update and turned off my laptop in hopes that it would work properly. After that my laptop has not been working. The machine turns on and gives me two options. Start windows normally or do a repair. Upon starting windows normally, it loads so far before sending me back to the two options of start windows normally or repair. On the second time I clicked repair. My laptop then goes so far before presenting me with a blue screen that is usually the screen where my accounts are. The cursor still moves but it loads no further even after leaving it an hour. I decided to make a repair disk, hoping that the problem was because of windows. the disk loads, gives me a choice on the keyboard language then does nothing. I honestly have no idea what to do, I want to keep all the files safe on my computer as I havent backed them up and I have worked so hard on the projects.
View 1 Replies
ADVERTISEMENT
Jul 26, 2012
I have put the d drive at the top of the list in the boot set up, but the system repair disc doesn't show up and I just get a blank screen. When I open safe mode, some windows files load up and the safe mode screen opens but not with a way to start up windows. Safe mode with networking or command prompt doesn't work either.
View 9 Replies
View Related
Aug 4, 2012
It loads fine on my tablet, it loads fine on my phone, and it loads fine on my old PC sitting right next to this one. But on this one it hangs and I eventually get this error: "Error 101 (net::ERR_CONNECTION_RESET): The connection was reset."So the things I have done so far to try and fix it are;Virus scanSpyware scanMalware scanipconfig /release /flushdns /renewCC CleanerManual change to Google's open dhcp serverMultiple router resest/PC restarts3 different web browserschecked my "hosts" file to make sure it didn't somehow get redirected in thereIf I use a proxy site it works fine, but I cannot get it to come up any other way. And the website will not allow connecting directly by IP address as I tried that also and it doesn't work even on systems that will load it properly.
View 5 Replies
View Related
Sep 3, 2011
lenovo laptop.. shows fatal error then it hangs... now it did not pass the loading. windows loadinng.. i try to repair using win7 ,, but it doesnt load anymore..
View 3 Replies
View Related
Dec 1, 2011
I installed some software yesterday on my other PC and it seemed to cause some problems with another application so I uninstalled it via Remove Programs. On restart Windows 7 (Home Premium 64 bit) failed to start and all I got was a BSOD with the main error PFN_LIST_CORRUPT. After unsuccessfully trying to start in Safe Mode or Last Known Good Configuration I thought I'd try to repair the W7 installation using the W7 disc. (BTW - I don't know of any other options in W7 but would be grateful for any advice on that.) After powering up I pressed F12 to get a menu up and selected the option 'Boot from CDROM'. It seemed to be doing this and I got the message 'Windows is Loading Files'. I expected at that stage to be presented with an 'install or repair W7' option screen from the disc, like in XP. However, all that happened is that the OS proceeded to try and load, unsuccessfully, and went back to the BSOD. How do I get the disc to try and repair the install, or, if it comes to it, reinstall W7? I can't see those options. Do I need to amend the BIOS or something? (In the meantime I have put the disc in and chosen to run the Windows Memory Diagnostics Tool (extended option) in the hope of finding the problem. This has been stuck at 21% for about an hour.) PS - I don't know which details are relevant but motherboard on that PC is Gigabyte P67A-UD7, processor is Intel 2600k, with 8GB of RAM. It is not connected to the internet.
View 6 Replies
View Related
Mar 15, 2012
I have a Sony Viao with Win 7 Home Premium and I just deleted some form of Trojan with MS Security Essentials and then I ran windows updates before I restarted the machine. Windows update installed some security updates along with Service pack 1 and IE9. Now the computer will not load Windows. It goes straight to the startup repair but cannot fix the problem. There is not restore points other that when SP1 was installed and I gives an error every time I try to restore it. I can get to a command prompt and I have tried to run sfc /scannow but it tells me there is a system repair pending which requires a reboot and then does nothing. I also tried check disk(just as a last chance) but that didn't do anything.
View 2 Replies
View Related
Dec 29, 2009
We just acquired a new laptop with Win7 HP preloaded. One of the first things I did was try to make a System Repair CD (Start/All Programs/Maintenance/Create a System Repair Disc). The CD burning process seemed to go normally. When I tried to run the disc, it seemed to load normally until it got to a screen with the "streaks in the sky" wallpaper and then it stopped. There were no menus, messages, or anything except the wallpaper. I made two discs using a name brand with the same result. I know disc quality used to be an issue but I didn't think this was so these days among the name brands.
View 8 Replies
View Related
Jul 1, 2012
Dell laptop bought 8 months ago. My son said it started running real slow now windows won't load at all. Goes to start up repair I tried all the options and it didn't work:
Problem Error Name Startup Repair
Problem Signature 1: 6.1.7600.16385
Problem Signature 2: 6.1.7600.16385
Problem Signature 3: unknown
Problem Signature 4: 371
Problem Signature 5: Auto Failover
Problem Signature 6: 1
Problem Signature 7: failure during setup
OS version: 6.1.7601.2.1.0.2561
Local ID: 1033
After running setup repair it said Root cause found. Failure while setup is in progress.
View 10 Replies
View Related
Dec 12, 2012
I have an acer aspire 5742 laptop. I was running windows 7. I do not have a disc as it was already loaded onto laptop that was a gift. Machine was running ok, it would overheat from time to time as i think the battery was on its way out, anyway thats not the problem. 2 days ago it switched itself off, when i tried to reboot i got a screen saying windows failed to start with options to -launch startup repair or - start windows normally. when i choose start startup repair it says in grey at bottom of screen loading windows files then it goes to a black screen and freezes. If i choose start windows normally it says starting windows and logo appears, then it just crashes.
View 2 Replies
View Related
Dec 2, 2012
I tried turning on my computer today and it gets stuck at the "Starting Windows" logo. It just hangs there indefinitely (usually only takes a couple seconds) and doesn't load. I then tried startup repair, and that just takes me to a black screen. After that, I tried putting in my Windows 7 boot disc to do a clean install, told the BIOS to boot to CD/DVD drive. It tells me to press a key, I do. I get "Windows is loading files" and then it goes back to "Starting Windows" forever, yet again. This happened so suddenly, it was working fine just hours before this.
View 3 Replies
View Related
Jun 23, 2012
I'm trying to get my nephew's laptop (acer aspire 5749) to boot up (apparently battery ran out during shutdown and not worked since) - on power up it gives the option to repair or start as normal. Repair takes you (eventually) to a grey screen with wavy ribbons at the top, a moveable mouse cursor but nothing else happens (even after leaving it for 24 hours). "Start windows normally" takes you to the loading windows screen, then it reboots itself (and the repair options come up again...).
Have booted with a windows repair cd but the same grey screen/wavy ribbons thing happens again and nothing happens (even after leaving it 24 hours).
Booting into safe mode gives no joy either and stops the boot up process during the drivers loading up. It used to stop at one of the AVG drivers so I used the AVG repair utility (midnight commander) to rename all the AVG stuff but then it just stops at another driver instead (now it stops at classpnp.sys).
I've done the memory check on the AVG disk which passes fine so I'm guessing I need to run some checks on the hard disk itself. I've just downloaded the Ultimate Boot CD ( Ultimate Boot CD - Overview ) but don't know which of the utilities you'd recommend I try first?
View 7 Replies
View Related
Oct 8, 2012
I've recently been having trouble with my computer. I turned it off one day, and when I tried to turn it back on the computer would never start. It would say loading windows, and it had the windows logo and everything, but then it would just stop. I tried to go through safe mode but that wouldn't load either. So I tried using my repair disks, but the repair disks won't load up either. I went into BIOS and made it so it would boot from the CD first, but... nothing. It just goes to this grey screen with that sweepy background graphic you get when you first get windows, and does nothing.I have a laptop, Windows 7 64 bit.
View 1 Replies
View Related
Nov 27, 2009
Went into the Windows 7 control panel to make a 'system repair disk' (boot disk), just in case I ever needed it. Making the disk went OK, with Windows 7 telling me it had successfully finished, and to label the CD.
I then put the boot CD into my DVD drive to make sure it worked OK. Computer boots from the CD and Windows 7 says it has started loading files. Then the pretty blue background screen started (just like the one in the F8 repair console), and then there was a long pause and then I get the error code shown on the photo below. Clicking OK reboots the computer, and no repair options ever load.
I made two separate boot disks to rule out a bad CD, but still get the same error #
This is a brand new Dell computer, both DVD drives work fine, and burn CDs without problems.
View 4 Replies
View Related
Apr 7, 2012
Im having a couple problems with my computer, firstly when i boot up The icon for the LAN onnection has a red cross to say its not connected even though it is and it will recognise that it is after approx. 5 minutes and will only say network instead of the actual name if my connection (network99) secondly when i log on from booting up the desktop take a while to load and all the icon thumbnails load slowly one at a time and its really slow.
View 1 Replies
View Related
Jul 6, 2012
Would it be possible to download (My Documents) from my XP 32 bit system to a flash drive and load it in my Win.7 64 bit system?
View 3 Replies
View Related
Jul 23, 2012
yesterday i was watching a show on my computer (sony vaio) and it kept freezing and lagging and wouldn't restart so i manually restarted it. when i tried to turn it on it would say "starting up windows" but it would take to long and it would restart again with error repair. when i would load error repair it would say it's loading files but only a background screen would show and no files.
View 7 Replies
View Related
Jan 2, 2013
Today I booted up my computer and got a screen saying something went seriously wrong with my computer and that I should repair it from an installation disk. I load up windows onto a USB, boot it and click the repair option. It's been about half an hour and nothing has shown up. Is it still loading or perhaps something is very wrong with my PC?
View 2 Replies
View Related
Dec 4, 2012
Old office computer:
Dell E510
P4 3.4 GHz
4 GB RAM
Radeon x800 PCIE
Crucial M4 SSD 120 GB
Windows 7 x64
New internals:
CPU: AMD A4 5300
Mainboard: MSI FM2-A75MA-E35 FM2
8 GB RAM
Corsair 450 watt PSU
Cheap Cooler Master Case
After assembling the new computer, I ran it without the system disk installed to make sure everything was kosher, and memory timings, etc. were correct. After verifying that, I shut it down and put the SSD into the new unit and booted it up. The system posts fine, but once the Win 7 startup image shows, the system restarts and brings me to the "start windows in safe mode/start windows normally" prompt.
View 4 Replies
View Related
Feb 6, 2012
I just have a quick comment on what not to do when running windows 7. I had just installed 7 Ultimate liked it seemed to be working fine! Then I made the dreadful mistake of compressing the hard drive. In doing so when the system tried to boot back up the system would not load received message boot manager compressed. So make a long story short I had to load my recovery disk and uncompress the hard drive. But why I have never had that issue with any other windows product until Win 7.
View 4 Replies
View Related
Jan 21, 2012
installing Windows 7 on a virtual machine.I have 178MB RAM (which I know isn't enough), but it does the Starting Windows screen before the installation, but then it comes up with this error: File: windowssystem32configsystem Status: 0xc0000001 Info: Windows failed to load because the system registry file is missing, or corrupt.
I have no other OS on the virtual machine.
View 2 Replies
View Related
Nov 5, 2011
I recently bought Windows 7. Sometimes when I start my computer, the USB will not work at the login screen. No keyboard or mouse works. If I get past the login, windows finds all my external hd's and starts to scan them. I think this is a problem with the USB.
View 6 Replies
View Related
Sep 2, 2012
Since I've change my internet connection to a much faster one, like 00Mbps(12.5MBps), I have come over a really strange problem. It's a PPPoE onnection and I have to dial it every restart.Whenever I downloading something with a high speed, aprox. over 6 MBps(Network Utilization 60%), my CPU usage raise. When it reaches 99%, the overall system performance is decreasing significantly.I used Performance Monitor to detect this and I found that System Interrupts is using it and also UPnP Device Host is also taking some CPU.My laptop is ASUS X54HY-SX030D, my LAN = Qualcomm Atheros AR8151 and my WLAN = Qualcomm Atheros AR9285. The drivers are up-to-date so
View 1 Replies
View Related
Feb 8, 2011
I finally got Virtual PC installed and checked out XP Mode. I also have recovered the harddrive from my old laptop (dual boot XP and Ubuntu), and am wondering if it is possible to load one of these systems into Virtual PC via USB, instead of creating a virtual drive with a completely new system and re-instaling all applications.
View 6 Replies
View Related
Oct 19, 2011
I'm using win 7. I also want to use win xp in my same pc. Last night I formatted my ''C'', firstly i installed xp on it & them i also installed win 7 without formatting ''C''. Now: when I start my pc , it dont ask me which win to load. It automatically load win7, I also went to bios window loader. there I saw only win 7 option, win xp option was not there.
View 16 Replies
View Related
Dec 4, 2011
I have recently purchased an Acer Aspire Z5610 it is a second user buy.Straight away i noticed that it just wasnt working right which is half to be expected im sure when buying second user equipment. After doing some research on forums i came to the conclusion of erasing the C drive and reloading the OS with the system restore disc i created on the computer.I was getting all the way through and it was failing and suggested that there was a fault on the memory disc. Ive managed to get into the back of the computer and removed the RAM sticks and tried loading with just 1 and with both and all the different combinations of being in different ports. Now it gets to 2% and just stops loading altogether its just sticks at wherever its stopped.
View 6 Replies
View Related
Jul 15, 2012
When I turn on my Sony VAIO VPCEE31FX the Startup Repair starts automatically, I have my Recovery disc, but when I use the F10 button it goes to a blank screen and does nothing. The Assist button does the same thing and I have tried the F8, ... Can someone please help? I tried to run a system restore but would not complete successfully.
View 1 Replies
View Related
Jun 3, 2012
Windows 7 Ultimate 32bit (retail) installed for about a week.
I am trying to troubleshoot regular BSOD's on my system. They seem to occur during HD video playback (XMBC) or under other system load like downloading large files (from newsgroups) where the speed is fairly high (apx. 2mbps).
I recently replaced my single core CPU for a dual-core thinking it may help, but it didn't. Now, I'm wondering if it could be the memory. I did the windows memory check, and it reported errors, but I don't where to find the log or what to do next.
View 7 Replies
View Related
Jan 15, 2011
I get this all the time in my event viewer. The system could not successfully load the crash dump driver. I'm using Windows 7Pro 64 bit.
View 5 Replies
View Related
Sep 23, 2012
I'm experiencing very annoying issue. CPU loaded with System Idle Process always. Because of that there is serious lag in iterfase. Problem appeared almost sumultaniusly on there different PCs. Using "Process Explorer" and going to System Idle Process - Threads I've found processes with names: ntoskrnl.exe!KiDespatch Interrupt+0x650 (on one PC) or ntoskrnl.exe!KiCpuId+0x6a0 (on two others)
I have three diffenent machines - one old acer laptop, one modern desktop and wmware virtual machine running on macbook. All have same OS - win 7 ultimate sp1. All of them are in the same network.
I've tried to localise issue by removing services and applications from startup - nothing, I've scanned machines with microsoft security essentials, Dr Web CureIT and Kaskpersky virus removal tool. Still nothing.
CPU get loaded as soon as system starts. Number of ntoskrnl.exe instances equals to number of CPU kernels. 1, 2 and 8 in my case on different PCs .
View 6 Replies
View Related
Jan 12, 2013
Recently my computer is always at 100% even when no apps are running. But as soon as i run Task manager load reduces. This doesnt happen in safe mode. Im sure that this is a virus. When i scan my computer with Avira Antivirus (Free) it doesnt detect anything
View 16 Replies
View Related
Jan 31, 2012
have been struggling with my system taking 2-3 minutes to find drivers for any memory stick I plug in to any of 3 USB ports on my Acer 1810T. When the process finally completes, the transfer speeds are about 1MB/s or less.Another (possibly related?) problem is when I insert any SD card in the dedicated slot for the first time, everything is fine. Once I remove and either re-insert (or insert a different card), nothing appears. I get a message saying "process is already in memory". I have to reboot to get things working again.
View 5 Replies
View Related
