Computer Won't Start, Won't Load Repair Disks

Oct 8, 2012

I've recently been having trouble with my computer. I turned it off one day, and when I tried to turn it back on the computer would never start. It would say loading windows, and it had the windows logo and everything, but then it would just stop. I tried to go through safe mode but that wouldn't load either. So I tried using my repair disks, but the repair disks won't load up either. I went into BIOS and made it so it would boot from the CD first, but... nothing. It just goes to this grey screen with that sweepy background graphic you get when you first get windows, and does nothing.I have a laptop, Windows 7 64 bit.

View 1 Replies


ADVERTISEMENT

Laptop Won't Start Up And Repair Disc Won't Load Up

Jun 23, 2012

I'm trying to get my nephew's laptop (acer aspire 5749) to boot up (apparently battery ran out during shutdown and not worked since) - on power up it gives the option to repair or start as normal. Repair takes you (eventually) to a grey screen with wavy ribbons at the top, a moveable mouse cursor but nothing else happens (even after leaving it for 24 hours). "Start windows normally" takes you to the loading windows screen, then it reboots itself (and the repair options come up again...).

Have booted with a windows repair cd but the same grey screen/wavy ribbons thing happens again and nothing happens (even after leaving it 24 hours).

Booting into safe mode gives no joy either and stops the boot up process during the drivers loading up. It used to stop at one of the AVG drivers so I used the AVG repair utility (midnight commander) to rename all the AVG stuff but then it just stops at another driver instead (now it stops at classpnp.sys).

I've done the memory check on the AVG disk which passes fine so I'm guessing I need to run some checks on the hard disk itself. I've just downloaded the Ultimate Boot CD ( Ultimate Boot CD - Overview ) but don't know which of the utilities you'd recommend I try first?

View 7 Replies View Related

Computer Won't Sartup And Startup Error Repair Won't Load Any Files

Jul 23, 2012

yesterday i was watching a show on my computer (sony vaio) and it kept freezing and lagging and wouldn't restart so i manually restarted it. when i tried to turn it on it would say "starting up windows" but it would take to long and it would restart again with error repair. when i would load error repair it would say it's loading files but only a background screen would show and no files.

View 7 Replies View Related

Computer Will Not Boot, Asks For Installation Disk. Repair Doesn't Load

Jan 2, 2013

Today I booted up my computer and got a screen saying something went seriously wrong with my computer and that I should repair it from an installation disk. I load up windows onto a USB, boot it and click the repair option. It's been about half an hour and nothing has shown up. Is it still loading or perhaps something is very wrong with my PC?

View 2 Replies View Related

Can't Get Computer To Do Start Up Repair

Feb 6, 2013

I have an Asus laptop model number K52F and I'm trying to repair computer with its own start up repair, but I am having problems getting that done.

View 1 Replies View Related

Why Won't Computer Start Up Or Auto Repair

Dec 15, 2012

The Auto repair was useless, and to make matters worst, I started getting the evil blue screen. After a week of headaches, I decided it wasn't worth it. So, I used safe mode to save all our pictures and my books on a flashdrive(nothing else, just so it whatever was hurting the comp wouldn't come back on). Then I decided to recover the comp so I could rid it of whatever was causing the awful blue screen. It fixed it, until recently. Now understand, I didn't put anything back on the comp(not even the stuff I saved to my flashdrive) since it irritated me so much before, so I know I didn't do anything to cause this. See, now the comp won't start up at all without the Auto Repair coming on. Even when I get the option to start up windows normally and bypass the auto repair, I still end up back on the auto repair. I'm totally lost on what to do.

View 4 Replies View Related

Computer Won't Start / Repair Or Restore

Feb 11, 2013

I've had prolonged problems with my computer; blue screen crashes around 5-10 times a day, everyday for past 2 years. Anyway my problem today is that finally it will not start up. I get the start repair (recommend) or start windows normally. The latter of the two just fails and restart the computer. When clicking repair it say it cannot repair automatically, I have also gone into advanced boot settings and tried safe mode which also failed and restarted the computer the same goes with trying last good configuration which also does the same. I have also tried repair disc and back up disc I have but I don't if it some I'm doing wrong but they are not loading.

View 33 Replies View Related

Windows 7 Refuses To Load And System Repair Wont Load

Jun 25, 2012

I dont know if this is posted in the right area but I'm so desperate to get my laptop working its unreal. First it started off with my laptop crashing, I had totally forgot it needed to do a windows update and turned off my laptop in hopes that it would work properly. After that my laptop has not been working. The machine turns on and gives me two options. Start windows normally or do a repair. Upon starting windows normally, it loads so far before sending me back to the two options of start windows normally or repair. On the second time I clicked repair. My laptop then goes so far before presenting me with a blue screen that is usually the screen where my accounts are. The cursor still moves but it loads no further even after leaving it an hour. I decided to make a repair disk, hoping that the problem was because of windows. the disk loads, gives me a choice on the keyboard language then does nothing. I honestly have no idea what to do, I want to keep all the files safe on my computer as I havent backed them up and I have worked so hard on the projects.

View 1 Replies View Related

I5, Z68, Trashing Disks, No Load, No Activity

Nov 15, 2011

I'm having this weird problem with a PC trashing disk to the point where the PC becomes completely unresponsive, yet, perfmon does not seem to indicate any load. CPU is 1-3%, memory used <1.5GB. Disk-IO is indicated to <100 KB/sec, yet, and this is the weird bit, the blue line "highest active time" hammers on at 100% non-stop, and the HD activity light is on constant.

This is the hardware:

GIGABYTE Z68MA-D2H-B3 MB
i5-2400 CPU
2 x 4GB 1333MHz RAM
2 x 320GB WD SATA3 (3GB) disks connected to the MB 3GB SATA connectors.

It started with an upgrade from an AMD64 with an Asrock MB which had worked fine for years. First I just replaced the MB, CPU and RAM and after the usual complaints by MS, Windows 7 eventually settled and everything worked fine for a couple of days until suddenly the trashing that I described above started. I thought this was perhaps due to some leftover drivers from the AMD time, so I reformatted and reinstalled Windows 7. The trashing eventually goes away, for example if I leave it alone overnight, it might have calmed down in the morning, or if I turn off the PC and turn it on again, it may take anything from a couple of minutes to a couple of hours, but eventually it starts again.I already checked for malware. I've used Avast for years, but decided to switch to MSE to see if it made any difference (it didn't). I also ran Malwarebytes, also didn't find any problems. Windows 7 has been updated with all the latest updates and patches and SP1 as well as with the supplied Gigabyte Drivers.

View 7 Replies View Related

Stop System Repair From Always Coming Up When Start Computer?

Nov 4, 2012

everytime i start up computr i get the system repair which keeps going; i manually shut computer off and then on which allows me to then sign in and opens up normally

View 2 Replies View Related

Stop System Repair From Always Coming Up When Start Computer?

Nov 4, 2012

everytime i start up computer i get the system repair which keeps going; i manually shut computer off and then on which allows me to then sign in and opens up normally?

View 2 Replies View Related

Recovery Disks Will Not Load In New Hard Drive After Crash

Mar 5, 2012

My hard drive crashed on my laptop. Before It crashed, It gave me a hard drive warning of imminent failure, and gave me an option to create recovery disks. I ended up creating 11 disks from the option. I installed the new hard drive and the BIOS reads that it will boot from the internal optical drive first. When I insert the first CD and start then computer, it continues to read "Operating system not found". When I look at the CD in another computer, it reads three files and one folder. The first file is an icon file which reads "Setup", the next is a "Media" bin file, and the last is an autorun setup information file. The last is a folder that contains various other backup files. My computer did not come with any copies of windows.

View 1 Replies View Related

Unable To Load The Factory Setting From The Recovery Disks?

Apr 10, 2012

i am using acer 5745g, when i tried to use the recovery disks created earlier, it is unable to load even i tried everything from the boot menu..

View 1 Replies View Related

Boot-start Or System-start Driver Failed To Load:dtsoftbus01

May 21, 2011

So ive been getting the black screen with movable cursor lately and have tried many a methods to remove it i tried checking in my event log for something, and this is waht it said "The following boot-start or system-start driver(s) failed to load:dtsoftbus01" So what does this mean and how can i fix this?

View 4 Replies View Related

Boot-Start Or System-Start Drivers Failed To Load

Mar 7, 2012

Monday couldn't boot up PC, had to go to system recovery and restore to previous day.

Log files show below that 4 things failed to load. Tuesday couldn't boot up PC again.. tried to restart like 4-5 times.. Finally comes up and in the logs there's numerous things that failed to load. Running a sfc /scannow right now.

View 1 Replies View Related

The Following Boot-start Or System-start Driver(s) Failed To Load?

May 8, 2012

I found corrupted system files, but it appears that the hard disk is fine. executed chkdsk and no bad sectors.Just looked into this on event viewer-The following boot-start or system-start driver(s) failed to load:xsoaynmfmfxpefxbozedltnzvijcvI am running Acer Aspire X3950-U3022 with Windows 7 Home Premium Home Edition.

View 4 Replies View Related

The Following Boot Start Or System Start Drivers Failed To Load

Oct 3, 2012

I'm not sure where to even begin to fix these problems. Some online searches suggested doing a system repair but I want to get some more feedback here before proceeding.Here is the message from the event log:The following boot-start or system-start driver(s) failed to load:

AFD
cmdGuard
cmdHlp
CSC
DfsC
discache
ElbyCDIO

[code]...

I realized some of these are not Windows 7 related but most are. While the computer "works", I do experience frequent reboots and freezes. Perhaps some of these driver loading failures are part of the cause of my issues.

View 3 Replies View Related

Windows 7 Failed To Start - Repair Or Start Normal?

Dec 28, 2011

Last night I was on my computer and then I shut it down. Today when I came home from work it keeps saying windows failed to start. I tried hitting f8 and loading to the last good configuration doesn't work, safe mode same thing, repairing nothing, so my last resort was my windows 7 cd. So I went into bios and made my configuration boot from cd/dvd popped it in and restarted, a black screen came up saying windows is loading files, then the windows 7 menu came up, picked my language, next, and first I tried repair my computer, I get the little circle meaning its loading for like 5 seconds them it does nothing, rebooted again but this time I chose, install and I've been on the setup is starting for like 20 min. And forgot to mention, when it boots seem like it does good then comes to the screen where it says windows failed and gives me two options repair our start normal, if I pick repair it just reboots and start normal takes me to like the pick your user screen but its just blank no users, so I can't even restore our access the computer.

View 3 Replies View Related

Can't Start Start-up Repair, Keeps Starting Recovery Management

Sep 3, 2012

I have an error that system32/hall.DLL is missing so I put in my windows 7 DVD ( I Have 4 DVDs for my windows, gateway, I always put the first one) so I could start start-up repair but when the windows files is loaded it keeps starting recovery mangment which gives me options to recover my hard drive to factory defaults (ie delete files on c and reinstall windows) ,why I don't get options to choose startup repair, how can I get it to start start-up repair?

View 3 Replies View Related

Windows 7 Hangs On Start Screen And Cannot Run Start Up Repair

Nov 3, 2012

My dell n5030 laptop isnt getting past the windows start up screen. It boots up fine up to the part where the four balls become the windows logo, but then freezes there everytime. When i try to select the windows start up repair it blacks out the screen and I cant do anything.

I know its not a faulty hard drive because its newly fitted and this problem occured previously on a different hard drive aswell.

View 6 Replies View Related

Windows 7 Repair Can't Load

Sep 3, 2011

lenovo laptop.. shows fatal error then it hangs... now it did not pass the loading. windows loadinng.. i try to repair using win7 ,, but it doesnt load anymore..

View 3 Replies View Related

Windows 7 Won't Load - How To Reinstall/repair

Dec 1, 2011

I installed some software yesterday on my other PC and it seemed to cause some problems with another application so I uninstalled it via Remove Programs. On restart Windows 7 (Home Premium 64 bit) failed to start and all I got was a BSOD with the main error PFN_LIST_CORRUPT. After unsuccessfully trying to start in Safe Mode or Last Known Good Configuration I thought I'd try to repair the W7 installation using the W7 disc. (BTW - I don't know of any other options in W7 but would be grateful for any advice on that.) After powering up I pressed F12 to get a menu up and selected the option 'Boot from CDROM'. It seemed to be doing this and I got the message 'Windows is Loading Files'. I expected at that stage to be presented with an 'install or repair W7' option screen from the disc, like in XP. However, all that happened is that the OS proceeded to try and load, unsuccessfully, and went back to the BSOD. How do I get the disc to try and repair the install, or, if it comes to it, reinstall W7? I can't see those options. Do I need to amend the BIOS or something? (In the meantime I have put the disc in and chosen to run the Windows Memory Diagnostics Tool (extended option) in the hope of finding the problem. This has been stuck at 21% for about an hour.) PS - I don't know which details are relevant but motherboard on that PC is Gigabyte P67A-UD7, processor is Intel 2600k, with 8GB of RAM. It is not connected to the internet.

View 6 Replies View Related

Windows 7 Will Not Load/Startup Repair Cannot Fix?

Mar 15, 2012

I have a Sony Viao with Win 7 Home Premium and I just deleted some form of Trojan with MS Security Essentials and then I ran windows updates before I restarted the machine. Windows update installed some security updates along with Service pack 1 and IE9. Now the computer will not load Windows. It goes straight to the startup repair but cannot fix the problem. There is not restore points other that when SP1 was installed and I gives an error every time I try to restore it. I can get to a command prompt and I have tried to run sfc /scannow but it tells me there is a system repair pending which requires a reboot and then does nothing. I also tried check disk(just as a last chance) but that didn't do anything.

View 2 Replies View Related

Startup Repair - Windows Cannot Repair This Computer Automatically

May 11, 2011

I am pretty sure that a virus cause this, right before my computer shut down on it's own my anti virus popped up and said that a Trojan was found but I didn't have to do anything. Then the computer shut down and when it restartrd started to load files and then go into startup repair, only it couldn't fix it. I tried a restore, but again it said that the startup files wern't there. I just quickly scanned the diagnostic details and noticed something that said "boot critical file C:CI.dll is corrupt".

View 8 Replies View Related

Windows 7 Repair Disk Won't Load Completely?

Dec 29, 2009

We just acquired a new laptop with Win7 HP preloaded. One of the first things I did was try to make a System Repair CD (Start/All Programs/Maintenance/Create a System Repair Disc). The CD burning process seemed to go normally. When I tried to run the disc, it seemed to load normally until it got to a screen with the "streaks in the sky" wallpaper and then it stopped. There were no menus, messages, or anything except the wallpaper. I made two discs using a name brand with the same result. I know disc quality used to be an issue but I didn't think this was so these days among the name brands.

View 8 Replies View Related

Windows 7 Won't Load - Startup Repair Failure

Jul 1, 2012

Dell laptop bought 8 months ago. My son said it started running real slow now windows won't load at all. Goes to start up repair I tried all the options and it didn't work:

Problem Error Name Startup Repair
Problem Signature 1: 6.1.7600.16385
Problem Signature 2: 6.1.7600.16385
Problem Signature 3: unknown
Problem Signature 4: 371
Problem Signature 5: Auto Failover
Problem Signature 6: 1
Problem Signature 7: failure during setup
OS version: 6.1.7601.2.1.0.2561
Local ID: 1033

After running setup repair it said Root cause found. Failure while setup is in progress.

View 10 Replies View Related

Windows 7 Won't Load And System Repair Disc Won't Run?

Jul 26, 2012

I have put the d drive at the top of the list in the boot set up, but the system repair disc doesn't show up and I just get a blank screen. When I open safe mode, some windows files load up and the safe mode screen opens but not with a way to start up windows. Safe mode with networking or command prompt doesn't work either.

View 9 Replies View Related

Windows 7 Will Not Load And Crashes On Startup Repair

Dec 12, 2012

I have an acer aspire 5742 laptop. I was running windows 7. I do not have a disc as it was already loaded onto laptop that was a gift. Machine was running ok, it would overheat from time to time as i think the battery was on its way out, anyway thats not the problem. 2 days ago it switched itself off, when i tried to reboot i got a screen saying windows failed to start with options to -launch startup repair or - start windows normally. when i choose start startup repair it says in grey at bottom of screen loading windows files then it goes to a black screen and freezes. If i choose start windows normally it says starting windows and logo appears, then it just crashes.

View 2 Replies View Related

Sytem Repair Disk Cannot Load - Error

Nov 27, 2009

Went into the Windows 7 control panel to make a 'system repair disk' (boot disk), just in case I ever needed it. Making the disk went OK, with Windows 7 telling me it had successfully finished, and to label the CD.

I then put the boot CD into my DVD drive to make sure it worked OK. Computer boots from the CD and Windows 7 says it has started loading files. Then the pretty blue background screen started (just like the one in the F8 repair console), and then there was a long pause and then I get the error code shown on the photo below. Clicking OK reboots the computer, and no repair options ever load.

I made two separate boot disks to rule out a bad CD, but still get the same error #

This is a brand new Dell computer, both DVD drives work fine, and burn CDs without problems.

View 4 Replies View Related

Computer Won't Boot OS Disks

Jun 8, 2010

This is for a friends computer, It has worked before because when i got the computer i put win 7 on then something ****ed out so i then put xp pro on and since then it doesnt want to know about any os disks, other bootable disks work just not os disks. I have a problem which i have had for a while now, every time i try to install a new os it wont boot the disk so that i can install it, I have been into the bios changed the boot priority to cd-rom first, i have changed the cables around, i have unplugged everything except the dvd drive, i have pulled the whole computer apart and put it back together piece by piece, i have also crawled the internet for solutions but no seems to give any answer that works, i have put a different dvd drive in aswell and that made no difference either.

My system specs are as follows

MB: Asus m4a79t deluxe
CPU: Athlon II X4 965 BE
memory: Gskill 4gb 1066
GFX card: HIS Ati 5850
Optical: Asus dvd burner
Storage: Samsung spinpoint F3 1TB

View 1 Replies View Related

Windows 7 Won't Boot - Startup Repair Doesn't Load Either

Dec 2, 2012

I tried turning on my computer today and it gets stuck at the "Starting Windows" logo. It just hangs there indefinitely (usually only takes a couple seconds) and doesn't load. I then tried startup repair, and that just takes me to a black screen. After that, I tried putting in my Windows 7 boot disc to do a clean install, told the BIOS to boot to CD/DVD drive. It tells me to press a key, I do. I get "Windows is loading files" and then it goes back to "Starting Windows" forever, yet again. This happened so suddenly, it was working fine just hours before this.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved