Windows 7 Repair Disk Won't Load Completely?
Dec 29, 2009
We just acquired a new laptop with Win7 HP preloaded. One of the first things I did was try to make a System Repair CD (Start/All Programs/Maintenance/Create a System Repair Disc). The CD burning process seemed to go normally. When I tried to run the disc, it seemed to load normally until it got to a screen with the "streaks in the sky" wallpaper and then it stopped. There were no menus, messages, or anything except the wallpaper. I made two discs using a name brand with the same result. I know disc quality used to be an issue but I didn't think this was so these days among the name brands.
View 8 Replies
ADVERTISEMENT
Nov 27, 2009
Went into the Windows 7 control panel to make a 'system repair disk' (boot disk), just in case I ever needed it. Making the disk went OK, with Windows 7 telling me it had successfully finished, and to label the CD.
I then put the boot CD into my DVD drive to make sure it worked OK. Computer boots from the CD and Windows 7 says it has started loading files. Then the pretty blue background screen started (just like the one in the F8 repair console), and then there was a long pause and then I get the error code shown on the photo below. Clicking OK reboots the computer, and no repair options ever load.
I made two separate boot disks to rule out a bad CD, but still get the same error #
This is a brand new Dell computer, both DVD drives work fine, and burn CDs without problems.
View 4 Replies
View Related
Jan 2, 2013
Today I booted up my computer and got a screen saying something went seriously wrong with my computer and that I should repair it from an installation disk. I load up windows onto a USB, boot it and click the repair option. It's been about half an hour and nothing has shown up. Is it still loading or perhaps something is very wrong with my PC?
View 2 Replies
View Related
Jun 25, 2012
I dont know if this is posted in the right area but I'm so desperate to get my laptop working its unreal. First it started off with my laptop crashing, I had totally forgot it needed to do a windows update and turned off my laptop in hopes that it would work properly. After that my laptop has not been working. The machine turns on and gives me two options. Start windows normally or do a repair. Upon starting windows normally, it loads so far before sending me back to the two options of start windows normally or repair. On the second time I clicked repair. My laptop then goes so far before presenting me with a blue screen that is usually the screen where my accounts are. The cursor still moves but it loads no further even after leaving it an hour. I decided to make a repair disk, hoping that the problem was because of windows. the disk loads, gives me a choice on the keyboard language then does nothing. I honestly have no idea what to do, I want to keep all the files safe on my computer as I havent backed them up and I have worked so hard on the projects.
View 1 Replies
View Related
Oct 20, 2012
My HP desktop with Windows 7 and IE9 has had issues on some websites since I've had it. The issues are that some pages will not load completely or load at all and the back button sometime will work and sometime it will not. All of these issues are random and intermittent on the same sites. Sometimes the refresh button will work and sometimes it will not. It seems that if they work at all they should work all of the time but I don't know enough about computer systems to understand. Some say I should change to another browser. I've tried Google Chrome and Firefox and they have their problems as well. I know I can't be the only one having these type issues. I delete cookies on a regular schedule.
View 5 Replies
View Related
Aug 24, 2011
I dont konw if this is a bug or what. But I can't seem to get certain websites to load that I was frequenting in the past weeks, but now find that the site wont load completely!Yes I am unemployed, trying to find work right now.
View 1 Replies
View Related
Sep 3, 2011
lenovo laptop.. shows fatal error then it hangs... now it did not pass the loading. windows loadinng.. i try to repair using win7 ,, but it doesnt load anymore..
View 3 Replies
View Related
Nov 4, 2009
Created it with no problems, apparently at least. My BIOS is set to boot from CD drive, so why won't my machine boot from the system repair disk? There were no errors when disk was created. My machine just boots to windows.
Anyone else experience this with Win 7 Professional?
View 9 Replies
View Related
Dec 1, 2011
I installed some software yesterday on my other PC and it seemed to cause some problems with another application so I uninstalled it via Remove Programs. On restart Windows 7 (Home Premium 64 bit) failed to start and all I got was a BSOD with the main error PFN_LIST_CORRUPT. After unsuccessfully trying to start in Safe Mode or Last Known Good Configuration I thought I'd try to repair the W7 installation using the W7 disc. (BTW - I don't know of any other options in W7 but would be grateful for any advice on that.) After powering up I pressed F12 to get a menu up and selected the option 'Boot from CDROM'. It seemed to be doing this and I got the message 'Windows is Loading Files'. I expected at that stage to be presented with an 'install or repair W7' option screen from the disc, like in XP. However, all that happened is that the OS proceeded to try and load, unsuccessfully, and went back to the BSOD. How do I get the disc to try and repair the install, or, if it comes to it, reinstall W7? I can't see those options. Do I need to amend the BIOS or something? (In the meantime I have put the disc in and chosen to run the Windows Memory Diagnostics Tool (extended option) in the hope of finding the problem. This has been stuck at 21% for about an hour.) PS - I don't know which details are relevant but motherboard on that PC is Gigabyte P67A-UD7, processor is Intel 2600k, with 8GB of RAM. It is not connected to the internet.
View 6 Replies
View Related
Mar 15, 2012
I have a Sony Viao with Win 7 Home Premium and I just deleted some form of Trojan with MS Security Essentials and then I ran windows updates before I restarted the machine. Windows update installed some security updates along with Service pack 1 and IE9. Now the computer will not load Windows. It goes straight to the startup repair but cannot fix the problem. There is not restore points other that when SP1 was installed and I gives an error every time I try to restore it. I can get to a command prompt and I have tried to run sfc /scannow but it tells me there is a system repair pending which requires a reboot and then does nothing. I also tried check disk(just as a last chance) but that didn't do anything.
View 2 Replies
View Related
Jul 1, 2012
Dell laptop bought 8 months ago. My son said it started running real slow now windows won't load at all. Goes to start up repair I tried all the options and it didn't work:
Problem Error Name Startup Repair
Problem Signature 1: 6.1.7600.16385
Problem Signature 2: 6.1.7600.16385
Problem Signature 3: unknown
Problem Signature 4: 371
Problem Signature 5: Auto Failover
Problem Signature 6: 1
Problem Signature 7: failure during setup
OS version: 6.1.7601.2.1.0.2561
Local ID: 1033
After running setup repair it said Root cause found. Failure while setup is in progress.
View 10 Replies
View Related
Jul 26, 2012
I have put the d drive at the top of the list in the boot set up, but the system repair disc doesn't show up and I just get a blank screen. When I open safe mode, some windows files load up and the safe mode screen opens but not with a way to start up windows. Safe mode with networking or command prompt doesn't work either.
View 9 Replies
View Related
Dec 12, 2012
I have an acer aspire 5742 laptop. I was running windows 7. I do not have a disc as it was already loaded onto laptop that was a gift. Machine was running ok, it would overheat from time to time as i think the battery was on its way out, anyway thats not the problem. 2 days ago it switched itself off, when i tried to reboot i got a screen saying windows failed to start with options to -launch startup repair or - start windows normally. when i choose start startup repair it says in grey at bottom of screen loading windows files then it goes to a black screen and freezes. If i choose start windows normally it says starting windows and logo appears, then it just crashes.
View 2 Replies
View Related
Dec 2, 2012
I tried turning on my computer today and it gets stuck at the "Starting Windows" logo. It just hangs there indefinitely (usually only takes a couple seconds) and doesn't load. I then tried startup repair, and that just takes me to a black screen. After that, I tried putting in my Windows 7 boot disc to do a clean install, told the BIOS to boot to CD/DVD drive. It tells me to press a key, I do. I get "Windows is loading files" and then it goes back to "Starting Windows" forever, yet again. This happened so suddenly, it was working fine just hours before this.
View 3 Replies
View Related
May 31, 2012
After I got my new laptop, I installed antivirus, windows updates, etc, removed bloatware and installed the software that I actually use. Then I created my System Repair disk (single disk). Does this disk include all software and windows updates that were on my computer at the time I created the disk? I have read that System Repair disks will only have the factory settings of Windows 7, but I don't know if this is the case for all System Repair disks or only those that came with the computer and were made before the computer was purchased?I've also read that a System Repair disk could include a system image. Is this true and done by default when the System Repair disk is created?
View 1 Replies
View Related
Feb 16, 2012
I'm well aware that you can boot from the CD and do a quick format during Windows 7 installation, but that's not what I need. I want wipe the disk in it's entirety before installing Windows. I'm getting some weird messages about disk errors during start-up and the EVGA tech support suggested that my last fresh install (done earlier today) didn't remove everything that was on the hard drive. I can't remember what he called it, but he said it could be less than a kb and cause the motherboard to try and boot from a partition that doesn't exist, giving me the errors. Is there some kind of formatting utility I can burn to a disc and wipe my local disk with?
View 6 Replies
View Related
Jun 23, 2012
I'm trying to get my nephew's laptop (acer aspire 5749) to boot up (apparently battery ran out during shutdown and not worked since) - on power up it gives the option to repair or start as normal. Repair takes you (eventually) to a grey screen with wavy ribbons at the top, a moveable mouse cursor but nothing else happens (even after leaving it for 24 hours). "Start windows normally" takes you to the loading windows screen, then it reboots itself (and the repair options come up again...).
Have booted with a windows repair cd but the same grey screen/wavy ribbons thing happens again and nothing happens (even after leaving it 24 hours).
Booting into safe mode gives no joy either and stops the boot up process during the drivers loading up. It used to stop at one of the AVG drivers so I used the AVG repair utility (midnight commander) to rename all the AVG stuff but then it just stops at another driver instead (now it stops at classpnp.sys).
I've done the memory check on the AVG disk which passes fine so I'm guessing I need to run some checks on the hard disk itself. I've just downloaded the Ultimate Boot CD ( Ultimate Boot CD - Overview ) but don't know which of the utilities you'd recommend I try first?
View 7 Replies
View Related
Oct 8, 2012
I've recently been having trouble with my computer. I turned it off one day, and when I tried to turn it back on the computer would never start. It would say loading windows, and it had the windows logo and everything, but then it would just stop. I tried to go through safe mode but that wouldn't load either. So I tried using my repair disks, but the repair disks won't load up either. I went into BIOS and made it so it would boot from the CD first, but... nothing. It just goes to this grey screen with that sweepy background graphic you get when you first get windows, and does nothing.I have a laptop, Windows 7 64 bit.
View 1 Replies
View Related
Feb 22, 2011
I am now trying to use another persons windows 7 home premium disk to reinstall my operating system because my computer only came with a partition devoted to windows 7 installation and has errors which must be the reason that my sfc /scannow has never worked.Now my question is this. This disk from a friend of mine is probably pirated as it is just a silver verbatim dvd that has windows 7 home premium written in blue highlighter.What I want to know is will this override my real version of windows that came with my pc
View 8 Replies
View Related
Jun 8, 2010
today i found that my windows 7 64 bit ultimate os was unable to boot.after many restart finally i used my system repair disk. disk did work and i m able to boot nowbut can anyone give me some insight about what went wrong in the first place. just dont want this type of problem in the future.
View 2 Replies
View Related
Nov 5, 2011
I think I must have lost Windows Installer using Revo uUninstaller and messed up the registry somehow. I'm a bit afraid to use the Win 7 repair disk 32 bit I created; I might mess things up further. I've tried to download a 32 bit installer update to no avail; it says it's not compatible with my version of Windows (Professional, SP1). Anyhow, does the Win 7 repair disk have a fix for the lost Win 7 installer? If so, I might give it a try if you can provide some guidance in doing so. I have everything backed up in Carbonite, Seagate external drive, Acronis True Image, memory sticks, etc.
View 3 Replies
View Related
Jul 24, 2012
my windows 7 program will not boot up its ask to put in repair disk is there any other way to fix it myself? how much will it cost
View 3 Replies
View Related
May 24, 2012
Is it possible to do a repair instal with any windows 7 disk????
View 4 Replies
View Related
Dec 17, 2012
I have an issue with my desktop PC. I believe I have a corrupted system file since the HDD is no longer bootable; however I have been able to remove the infected drive and install it as a slave on my HTPC. This has allowed me to backup all my important files.My question... I'd like to run a Repair on the existing Windows 7 install but I never created a rescue disk when the OS was operational. Can I create a repair disk using my Windows 7 OS off the HTPC and run it over my desktop PC? Or is the disk specific to the PC the OS belongs to.
View 5 Replies
View Related
Jul 23, 2012
yesterday i was watching a show on my computer (sony vaio) and it kept freezing and lagging and wouldn't restart so i manually restarted it. when i tried to turn it on it would say "starting up windows" but it would take to long and it would restart again with error repair. when i would load error repair it would say it's loading files but only a background screen would show and no files.
View 7 Replies
View Related
Aug 15, 2011
I have a disk for Phillips Voip which will not load on Win 7 it says XP or later?
View 2 Replies
View Related
Dec 17, 2012
When I recently tried to boot up my system all I could get is a blank screen. Tried to boot up using Windows 7 repair disk but it goes into a loop at the "starting windows" screen consequently won't boot up for me.
View 1 Replies
View Related
Dec 21, 2011
I have a Asus K52F laptop running Windows 7 64 bit. The laptop did not come with a Windows 7 recovery disk. Can a Windows 7 64 bit recover disk be created? When I use the term "recovery disk", I do not mean "repair disk". I already created a repair disk. But my understanding is that the repair disk can not be used to reinstall Windows 7.
View 2 Replies
View Related
Nov 11, 2011
Well I have been trying to fix this error for hours And after the system recovery scan it says there are problems with my start up options but I cant hit those buttons because the s2 keyboard I have in simply wont let me. Secondly I have ran the repair tool but it says I have to manually fix this problem so I tried using the command prompt but to my great luck again I cant get to that option because of my keyboard so I think the real question here is what do I have to do to my keyboard to land over all of the settings?
View 5 Replies
View Related
Dec 19, 2012
i bought this new VAIO laptop, and i want to repair it but when i bought the laptop the store didn't give me the Windows 7 disk but i need to do a complete repair. But this computer also have This VIAO Factory restore setting which restore it to the original factory install software, should i use this option or something else?
View 9 Replies
View Related
Oct 12, 2012
I've got a CyberPower desktop computer which has worked great for over a year now. I was having some problems with my hard drive and so I started to attempt to improve it by first doing a disk check and then disabling some programs launching when the computer starts, making sure not to touch the Microsoft ones. Now when I start my computer I'm greeted with a message from the windows boot manager saying "Windows failed to start. A recent hardware or software change might be the cause" the status is "0xc000000f and the info is "The boot selection failed because a required device is inaccessible". The major problem that I'm having is that when I put in the CyberPower disc which contains Windows 7, it seems to just ignore it! What can I do?
View 4 Replies
View Related
