I have a Asus K52F laptop running Windows 7 64 bit. The laptop did not come with a Windows 7 recovery disk. Can a Windows 7 64 bit recover disk be created? When I use the term "recovery disk", I do not mean "repair disk". I already created a repair disk. But my understanding is that the repair disk can not be used to reinstall Windows 7.
I'm trying to created a posready 7 embedded image, and I want to be able to supply a system repair disc and system image with it, should the disk hardware fail for the end user.
The procedure seemed straightforward, and I'm running it straight after a fresh posready install to test it. I have 2 USB DVD drives attached, one to write the image to, and one because it needs the installation media as part of the creation process. from control panel, backup and restore, click Create a System Repair Disc Choose the dvd writer to use to create the disc and insert a blank disc, I choose E: in my case which has a blank DVD-R "Insert Windows Installation Disc", OK I put the Posready7 install DVD in the other DVD drive F: , click continue... System Repair Disc could not be created, The system could not find the path specified (0x8070003) I have tried inserting instead a Windows 7 Professional DVD at step 3, have tried with a single DVD writer, swapping discs, have tried on a couple of different posready7 installs, one with the 100MB system reserved partition and one without.
I've googled the error code and got lots of results suggesting corrupt user profiles etc, but these are new installs.
I have a few friends that would like me to fix some virus/malware issues. Most are Win 7 users(a few running XP), but don't have any of their installation media or driver disks or anything. I've had a few personal instances where I used Norton or a similar program to scan for viruses before, and when it did so it removed some of the boot files, or some other system critical file. I don't want that to happen here, cause I don't want to give them back useless machines.
Can I just create a "Repair Disk(DVD)" in Windows? Will that take care of an issue like the one I described above? Should I use an external to create images of each, one at a time, run the scans and then use the image if anything goes wrong? And if something does go wrong, how would I restore from the image? I've never done that before, and I'm eager to learn.
I am attempting to run a complete system recovery (factory restore) on Windows 7 using a recovery partition. Last time I ran the recovery, I ended up having a lot of problems with system programs not being installed correctly, and with the system administrator account. Now, when I reboot and use the F8 option to bring up the boot options, I do not have an option to "Repair your computer" as I had before. I also tried rstrui.exe through the command prompt, but it only tells me that "No restore points have been created on your computer's drive. To create a restore point open System Protection."
I also checked my drives through DISKPART to make sure there were no problems with the recovery partition, but it is showing up normal. On the Windows knowledge database it said that if the system recovery options are missing, then the system is not installed with the options or they were disabled by the network administrator. Given that I had no problems accessing these the last time I ran the recovery, I'm assuming something happened with the account. I am set up with 1 user in the system, which is the administrator.
1) Re-enabling the options so that I can access the "Repair your computer" options on the boot menu.
2) Run the system recovery options without having to get into the bootup menu.
Created it with no problems, apparently at least. My BIOS is set to boot from CD drive, so why won't my machine boot from the system repair disk? There were no errors when disk was created. My machine just boots to windows.
Anyone else experience this with Win 7 Professional?
I have an HP Mini 110-3000. I think I have pretty messed up with the boot configuration. However, I still have an HP_RECOVERY partition intact and another partition named BOOT (X. There is no OS installation on any of the drives, though BIOS shows a Win 7 installation. The main issue is that I want to do a factory restore using the HP_RECOVERY partition. The partition is already set to active. But when I boot it gives me a WINDOWSsystem32winload.exe file missing ot found. Already I have rebuild the BCD. What must I do to make this system use its HP_RECOVERY partition to do a factory restore.
After I got my new laptop, I installed antivirus, windows updates, etc, removed bloatware and installed the software that I actually use. Then I created my System Repair disk (single disk). Does this disk include all software and windows updates that were on my computer at the time I created the disk? I have read that System Repair disks will only have the factory settings of Windows 7, but I don't know if this is the case for all System Repair disks or only those that came with the computer and were made before the computer was purchased?I've also read that a System Repair disk could include a system image. Is this true and done by default when the System Repair disk is created?
I have Windows 7 64b with a Toshiba Portege R700. I cannot create a repair disk, I receive a parameter error. Like it doesn't recognize the CD drive. I tried un-hiding the administrator account and tried with that account but no luck either. I also tried to find the recovery folder with the cmd prompt but nada... it cannot open the boot configuration data store.
i have the windows 7 disk but the acer computer tells me to insert window 7 disk and resart computer but i don't know how to restart it b/c i can't get to the log in menu
I'm trying to create a new disk partition so that I can install Windows 8 (Consumer Preview) on it. However, I'm running into an issue here. When I go to create the partition, I get to the final step and this is what I run into (see image below).I'm thinking of just leaving the space unallocated and formatting it when I do my install of 8, but then I'm afraid that might render my Windows 7 partition unbootable. Will that happen?
when trying to create a system repair disc, i get the following message: system repair disc could not be created, the parameter is incorrect (Ox80070057)
Known good cd drive & dvd drive installed in my pc.Tried discs separately in each drive three ways.Have tried Search box typing recdisc.exe.Have tried going through Control Panel to reach the part to create repair disc.Have tried using an elevated prompt & then typing recdisc."System repair disc could not be created. The parameter is incorrect. (0x80070057)."
i have a Sony Vaio laptop with windows 7 home premium 32bits and i wanted to create a system repair disc with the windows 7 tools but this laptop has no CDDVD drive so obviously the tool gives an error asking for one to be pluged in...o the question is, is there any other way to create a system repair disc or do i need to get an external cddvd drive?EDIT: forgot to say, the point is so i can create an image of the system repair disc so i can put it on an USB drive
Is there a way (or tutorial) to create a repair disc for a multi boot Windows 7/Vista on a USB flash drive? In other words would like to be able to use a USB flash drive in an emergency to boot into a multi boot computer using Windows 7/Vista.
I see where there is a way to create a Vista/XP multi boot USB repair disc but not one for Windows 7/Vista multi boot. Evidently the boot files for Vista/XP are different from the boot files for Windows 7/Vista. I have a 4GB flash drive that I would like to use.
I am now trying to use another persons windows 7 home premium disk to reinstall my operating system because my computer only came with a partition devoted to windows 7 installation and has errors which must be the reason that my sfc /scannow has never worked.Now my question is this. This disk from a friend of mine is probably pirated as it is just a silver verbatim dvd that has windows 7 home premium written in blue highlighter.What I want to know is will this override my real version of windows that came with my pc
today i found that my windows 7 64 bit ultimate os was unable to boot.after many restart finally i used my system repair disk. disk did work and i m able to boot nowbut can anyone give me some insight about what went wrong in the first place. just dont want this type of problem in the future.
My Sony Vaio froze on me and I shut it down by the power off button As soon as I rebooted it would go to the windows 7 loading screen and then go to a blue screen! I tried to restore my computer with the Sony restore disk. It would load then go to the blue screen and the mouse is present but it doesn't do anything from there! Sometimes it would bring up the command prompt and the I cursor blinks and nothing happens Then I tried to attemped and restore with Windows 7 disk and samething happens it loads and instead of a blue screen it is black with a mouse and doesn't do anything I tried pressing F12 and it says Check cable connection pme-mof: exiting intel pxe rom.
When I don't put a disk in it goes to a black screen that says If windows files have been damaged or configured incorrectly, start up repair can help diagnose it!
Running Windows 7 Home Premium 64 byte. Have a 1 tb external Seagate drive connected with USB 2. Disk capacity is showing 925GB. Have lost 75 GB. Is there a way to recover the the lost 75 GB?
I'm using Windows 7 ultimate RTM and cannot create a repair disc image anymore. i get the error code 0x80070057 incorrect parameter with a dvd inserted. I'm really not sure what's causing this..
I think I must have lost Windows Installer using Revo uUninstaller and messed up the registry somehow. I'm a bit afraid to use the Win 7 repair disk 32 bit I created; I might mess things up further. I've tried to download a 32 bit installer update to no avail; it says it's not compatible with my version of Windows (Professional, SP1). Anyhow, does the Win 7 repair disk have a fix for the lost Win 7 installer? If so, I might give it a try if you can provide some guidance in doing so. I have everything backed up in Carbonite, Seagate external drive, Acronis True Image, memory sticks, etc.
I have an issue with my desktop PC. I believe I have a corrupted system file since the HDD is no longer bootable; however I have been able to remove the infected drive and install it as a slave on my HTPC. This has allowed me to backup all my important files.My question... I'd like to run a Repair on the existing Windows 7 install but I never created a rescue disk when the OS was operational. Can I create a repair disk using my Windows 7 OS off the HTPC and run it over my desktop PC? Or is the disk specific to the PC the OS belongs to.
How can I recover the Windows 7 key if the hard disk has broken (I have changed it) AND I cannot see the Windows key label on the back of the laptop because it isn't there (there's a linux label instead)?, of course my doubt is whether Windows or Linux was the original OS. If Windows 7 was the original OS and is thus an OEM version, can I contact Microsoft and ask them and give them the serial number or product number of the netbook?
I wanted to double check on the making of a recovery disk for a friends windows 7 64-bit laptop.I know you can go into Control Panel/System and Security/Backup and Restore.There are two options to choose from:1) Create a system image2) Create a system repair diskMy question is to verify that you should make both disks.Create a system repair disk gives you the recovery console items and Create a system image gives you an act of a Windows Installation CD, should you need to do a format and complete fresh install of Windows?
Is it possible for me to create a windows 7 home premium install disk for my pre installed acer laptop.I have of course made the recovery and factory disks but need to restore my machine preferably without the junk an acer factory reset will put back on. Reading up i see i need to burn my iso file to dvd. Sounds good to me but i cannot find it and am not sur if i even have one lol. I have found a download for it (3gig) is it save to use this then enter my product key during install.