I am attempting to run a complete system recovery (factory restore) on Windows 7 using a recovery partition. Last time I ran the recovery, I ended up having a lot of problems with system programs not being installed correctly, and with the system administrator account. Now, when I reboot and use the F8 option to bring up the boot options, I do not have an option to "Repair your computer" as I had before. I also tried rstrui.exe through the command prompt, but it only tells me that "No restore points have been created on your computer's drive. To create a restore point open System Protection."
I also checked my drives through DISKPART to make sure there were no problems with the recovery partition, but it is showing up normal. On the Windows knowledge database it said that if the system recovery options are missing, then the system is not installed with the options or they were disabled by the network administrator. Given that I had no problems accessing these the last time I ran the recovery, I'm assuming something happened with the account. I am set up with 1 user in the system, which is the administrator.
1) Re-enabling the options so that I can access the "Repair your computer" options on the boot menu.
2) Run the system recovery options without having to get into the bootup menu.
I'm trying to restore my Windows 7 64bit machine to its factory settings at the moment, and I've tried the following but they've all failed.1.) Boot up and hit F8, select Repair computer, but then it just boots Windows normally.2.) Create System Repair Disc, and from BIOS boot-up, choose boot from DVD-RW, but when it does that and loads Windows files, Error 0xc000000d and winload.exe missing comes up.3.) When I tried to insert the installation disc that came with my computer, it's not recognized and nothing happens (during boot from DVD-RW).*Note - Just today when I tried to do a system restore, it said that I had no previous restore points, but I just restored a week ago, so that might add some info.
So I need to repair integral Windows files on my install. On XP this was a trivial matter of booting off the XP install disc and selecting the appropriate option. What I never noticed up until now (since I need the option now) is that MS in their infinite wisdom has removed that option for Windows 7 (and i'm guessing probably 8 as well) and replaced with a start-up repair option which is completely useless for addressing my ultimate issue (wifi gui corruption). any method by which one can conduct an actual repair install on Windows 7?
I have a Asus K52F laptop running Windows 7 64 bit. The laptop did not come with a Windows 7 recovery disk. Can a Windows 7 64 bit recover disk be created? When I use the term "recovery disk", I do not mean "repair disk". I already created a repair disk. But my understanding is that the repair disk can not be used to reinstall Windows 7.
My PC, EVERY time I cold boot, I get a blue screen on or before the Starting Windows screen. I have taken a wild guess that this is my video card or my mainboard because I remember seeing an "nv" in one of the errors a long time ago and I have dual 9600 vid cards and an NForce mainboard. This has happened since the PC was brand new, running Vista 64, but I never cared because after letting the box literally warm up, I can boot and reboot fine and everything. I am totally OK with this problem even though I have tried to fix it unsuccessfully without putting too much effort into it because I don't want to work on this all day ever as long as I can boot. It's cool. That has very little to do with my question though, but I am just presenting it as the cause, but I require any suggestions on fixing it the bluescreen. Its part of my life now, and I would probably feel weird without it at this point.
The actual problem is that i usually turn the PC on, walk away, come back in a few min to a bluescreen and then reboot, walk away again adn and Vista would come right up and be ready when I got back. Windows 7, after a failed boot, will kindly and with the best intentions assume that i want to fix that problem and will select Windows Startup Repair as the default boot option. I need to physically wait for this prompt and pick Start Normally. If I don't my PC is yelling at me for trying to cancel Windows Startup Repair because I know it can't find the solution to my problem, nor do I require it to fix that problem. I often forget to wait for this prompt and it slows down my normal workflow and cuts into my routine.
How can I select Start Normally as the default option after a failed boot? If I need to run Startup Repair, i will most likely make myself available to select it from the prompt. I don't see anything in Startup options and haven't had to manually configure a boot option via text file since Windows 98 so I'm not even 100% sure where to begin where to look.
Does Windows 7 Ultimate-64bits have an installer repair option, as Vista and XP did? I would like to insert the CD-ROM (full retail version), drill down to Upgrade, and, instead of reinstalling Windows 7 Ultimate, click on Repair, but I do not see this option on any branch of the installation procedure. Where is the Repair option found, or is it missing from the Windows 7 CD-ROM?My machine is mainly working, but autochk at startup fails and there may be hidden problems that need to be fixed. System Restore (possibly corrupt), Startup Repair (inadequate), sfc /snannow (unsuccessful), chkdsk (inadequate), and a System Repair disk (could not make) are not options. I thus need to use the installation CD-ROM or else download something, if I only knew what. I hope to run a repair utility without resorting to a clean install that would wipe out my hard disk. Please enlighten me.
I have an HP Mini 110-3000. I think I have pretty messed up with the boot configuration. However, I still have an HP_RECOVERY partition intact and another partition named BOOT (X. There is no OS installation on any of the drives, though BIOS shows a Win 7 installation. The main issue is that I want to do a factory restore using the HP_RECOVERY partition. The partition is already set to active. But when I boot it gives me a WINDOWSsystem32winload.exe file missing ot found. Already I have rebuild the BCD. What must I do to make this system use its HP_RECOVERY partition to do a factory restore.
Created it with no problems, apparently at least. My BIOS is set to boot from CD drive, so why won't my machine boot from the system repair disk? There were no errors when disk was created. My machine just boots to windows.
Anyone else experience this with Win 7 Professional?
Somewhere along the way, the handler for Windows Media Player disappeared from the DVD Autoplay list. Is there a simple reg fix to put it back? I found one for Media Center, but not WMP.
Living is south FL can be a bitch when the rains come as there often is a ton of accompanying lightening that plays havoc with the electrical system, even though I have surge protectors inside and outside the house. We just had some very heavy rains with lightening and my computer shut down several times, but I could restart it each time...except for the last time when Windows wouldn't startup. At that point, Start Up Repair came into play. Although I routinely backup on an external drive, of course I never did it this month-DUH!Results from SUR were error free (error code=0x0) on all the parameters tested, however there were the following error codes reported:"Unspecified change to the system configuration might have caused the problem." Failed: 0x1fRepair Action: System FilesFailed: x490There were more options to select for a recovery task, but I didn't try them as they didn't seem to be as salient as the two above.
I'm needing to create a shortcut, but the context menu that normally lists 'new shortcut' is missing. If it were just a shorcut to an exe or something I would just copy and past link, but I'm needing to create a shortcut for 'RunDll32 DwmApi #105'. But I can't seem to do that. I haven't made any changes to my system, so there should be no problems.
file association in that I can't get to choose any default program from a list. After clicking "Open with" I choose the option of; "Choose default" and get this with everything I try to choose a default for;
"The file does not have a program associated with it for performing this action, please install a program or, if one is installed, create an association in the default program control panel"
I like to use "FYzip" to open all types of zip files/folders as it works well with my expectations but I can't get it or even a photograph to have a default opening program. I have no problem in opening any format of photographs but that's not the issue. I end up doing a blasted Re-Format of my whole Windows 7 home addition?
i have windows xp as my primary boot windows and windows 7 as my secoundary windows ,xp is on c drive and 7 is on d drive my windows xp create a problem so i install a fresh a copy of xp now my xp is working properly but dual boot option is missing that shown on startup
After installing Windows 7 Ultimate 64 bits, I used the option "system image" from Windows. It burned some folders and files on a DVD. Then I begun with try/error to install older software and hardware on Windows 7 or on XP mode to have an idea how this works. Now my windows is a mess. I would like to restore that image to my HD and install only the software/hardware that I learned, will work. Does it work like the Partition Images made with Symantec Ghost or Acronis True Image?
I used to send files to my mobile phone via Bluetooth option in the "Sent to" menu. A few days ago I found out it was missing. A further few days back, I reinstalled my bluetooth software as its tray icon was missing I have reinstalled bluetooth software but still the "Sent to -> Bluetooth" option is missing and I couldn't find the option to enable it.I am unable to send files via bluetooth unless connected to PC Suite.
It seems I'm missing a Margin Option.The Margin options available are:Normal
Narrow Moderate Wide Mirrored
Office 2003 Default I'm missing the Office 2003 Default Margin Option.I called Microsoft and was told the option was discontinued but yet the option is clearly noticeable from this link:
I decided to recover the windows and I haven't made the recovery disc yet, so I will recover from from windows directly from hp recovery systemI just want to know how many times can I use this option for later?
I've also tried the command prompt trick on here to no avail either. Strangely, whenever the Windows CD is in my CD-ROM, it starts up fine and works. However, I will go to work and come back after having left it on and it will be back to the BOOTMGR is missing screen inevitably by the time I get back, so I don't know long it stays working with the windows 7 CD in. Would a clean re-install of windows 7 do it? I would prefer not to but it isn't out of the question. I am something of a computer novice, but as best as I can tell, I have a Corsair SSD with windows installed on it, and a separate regular old HDD from Seagate for storage of media.
Well I have been trying to fix this error for hours And after the system recovery scan it says there are problems with my start up options but I cant hit those buttons because the s2 keyboard I have in simply wont let me. Secondly I have ran the repair tool but it says I have to manually fix this problem so I tried using the command prompt but to my great luck again I cant get to that option because of my keyboard so I think the real question here is what do I have to do to my keyboard to land over all of the settings?
I've just built my own computer with a friend and we installed windows 7 and it worked fine for 3 days. Then it started to not respond. Restarted the computer and it wouldn't start up again, came up with a bunch of errors. So I reformatted and it says "windowssystem32driverwdf0100.sdf is corrupt or missing." I've tried system repair but it won't work. It won't open command prompt or anything.
I am missing the mail recipient option in the sub menu off Send To. I have checked that it is in the send to folder and it is in the shell. The other user on the computer can do this. So I copied that icon and replaced the one that was not working. Same result. I have checked the program defaults. I am using Windows 7 and Outlook 2010.
I've had this issue for a long time and it is that the volume icon wont show up at the bottom right of my screen for my pc, i go to activate it from control panel and its greyed out. I have tried other methods like restarting explorer or going into regedit and doing a bunch of stuff.
The start up repair can't fix it and I noticed that in system recovery option, the operating system says" Windows 7 on (D Local Disk" does that mean the windows directory transferred to Local Disk D? And another thing is that I can't boot the pc in cd/dvd, when i click f8 and click the CD rom the message" press any key" won't show?
i have a Acer Aspire 5755g-6841 laptop, and yesterday i started getting this message. "bootmgr is missing" after i tried to do a system restore. The attempt at the system restore ended bad with it not finishing and me having to reboot my laptop. It was stuck at 99% completion for 5hrs. Now when i use 2 different restore discs that i made for windows 7 64-bit from a downloaded iso, i get stuck in the recovery options menu with the blue loop never ending and no OS being loaded to be selected. Also anytime i try to use the eRecovery from pressing ALT+F10 it gets the blue loop there and never loads.
Boot loader is missing from HD. I entered the windows repair from dvd, and it finally showed the windows installation, C:Windows (recovered). Tried selecting it again to have windows reinstall MBR, but now it says version is not compatible. So, needless to say, I can't proceed any further. The only thing I can figure is the the windows dvd is both x86 and x64, thereby not recognizing that I have the x64 installed.
I have a Gateway T-1625 laptop. it has 2 gb of ram, 500 gb hdd, and an amd turion 64x2 processor. It came with win vista and am trying to upgrade to win7. I ran the disk, everything seemed to go fine, all the way up to setting the time and date. After the restart, it goes to "System Recovery Options" and asks for language. Next screen says "select an operating system to repair and click next. Only win vista operating systems are listed and can be repaired". My problem now is only win7 is listed. My options are to load drivers or next. I have read in a few places to load drivers, but i read them after trying to install win 7. I don't know where to look for drivers if that might be the case. If i click next, i get the "choose a recovery tool" and it states the operating system is win7 located on (C Local Disk. I have tried the startup recovery several times to no avail. When i look at the details, there are 10 problem signatures. The ones that look odd to me are the "Signature 1 SystemDisk" and "Signature 6 OsVersionMismatch". Like most idiots, i thought i could handle a simple installation and didn't bother to look for tips before hand, and now it's costing me.
