i have windows xp as my primary boot windows and windows 7 as my secoundary windows ,xp is on c drive and 7 is on d drive my windows xp create a problem so i install a fresh a copy of xp now my xp is working properly but dual boot option is missing that shown on startup
View 2 Repliesi have both linux and windows 7 with dual boot and after reinstalling windows 7 the boot option about linux does not appear .it boots only from windows...i can fix this only by making anither partition of ubuntu for example and then everything is ok..but i have one exta partition that i dont need.
View 5 Replies View RelatedWhen my computer wouldn't turn on in the morning I did the usual diagnostics; unplug things one at time test with spare components etc... Any way I qucikly figured out the PSU was dead so I ordered a new one and was back up and running. However when I reassembled the computer after unplugging everything (and removing the m/b) I plugged the HDDs back into different SATA ports from which they orginally came. When I came to boot the computer up I got the error message: 'BOOTMGR missing' or it may have been 'NTLDR missing' I can't remember.
I fixed this problem by using the 7 startup repair utility. I have no problem booting into Windows 7, but I have lost the option to boot into my XP install on anther disk. I looked in the boot tab under System Configuration and the only OS showing is this Windows 7 install. So my question is this: how can I get the choice of which OS to boot back?
(I should mention that the XP install is on a different disk from the 7 install).
I created a separate partiton and installed Win 7 fine. It dual booted fine as well. I then renamed the old XP boot partition and this caused the PC to give NTLDR missing and wouldnt boot.
So I reinstalled Win 7 as a custom install and it all boots fine into Win 7 without providing me a dual boot option. I am not too concerned about this as eventually I was going to go completely over to Win 7 anyway
Question I have is
1) The old Win XP boot partition is viewable in explorer. Can I just reformat this and reclaim the space - I want to make sure that the PC is not looking for any files in that old partition
2) Can I delete the Windows.old folder as well
I've installed 64bit win 7 on a 2nd partion of my main drive running vista 64bit. The installation all went smoothly and loaded into win 7.
But when restarted I did't get a windows boot manager screen so i could pick if I wish to load Vista or Windows 7, instead my system just loads straight into Vista.
Do I have to enable my system to be able to see the Windows 7 install?
I have dual boot with Xp and windows 7.when i log into my Xp all the restore points being deleted from windows 7.when i check the disk management information in 7 it shows windows 7 create a logical drive with my Xp primary drive.even i am hide the drive from both windows means Xp drive from windows 7 and vice verse.So i like to unmount or remove the drive partition of windows 7 from Xp and Xp primary from windows 7.So that they dont affect each others system files with being deleted the partitions.
View 1 Replies View RelatedI partitioned my HD in attempt to dual boot linux. But with a botched install of linux, I am now getting the above error when I try to boot back into windows. I have booted from an install dvd, gone to the command prompt and ran these commands I found in another thread.
bootrec /fixmbr
bootrec /fixboot
bootrec /rebuildbcd
All three commands were completed successfully but in the end, still no go. Any other suggestions I could try?
I have two disks 0 & 1 in my PC & each has two partitions. I had first installed Win xp on 1st Partition of Disk1 & checked the system is running perfectly. Afterwards I installed Win7 on 1st Partition of Disk 0 & checked the system booting/working in Win7 perfectly but now I can't acces my Winxp. Whenever I try to boot from Disk 1 it gives a message "NTDLR missing".
View 3 Replies View RelatedI spent the day trying to fix my operating systems boot.
Earlier in the day i tried to install a MacOSX (I've formated the second hard-drive asoff now) on a seperate hard-drive (CRIVE AKA Windows 7 drive was unplugged). After i was done i decided to plug in the c drive because i wanted to get on windows to setup dualboot. But for some reason it said bootmgr missing...
I've tried bootrec /fixboot and the other ones.
I just checked my drive somehow Cdrive turned in to D drive would that be the problem? Could somebody please show me a way to change from D drive to C drive?
If this would help nail the problem. Also tried to boot the hard-drive from my laptop via esata. I get a different problem i get a blue screen during the Windows seven loading screen. Heres the stop code: 0x0000007b.
have a Toshiba Satellite A505-S6980 Windows 7 Home Edition Premium Edition laptop. I recently tried to dual boot with Windows XP Professional service pack 3 iso cd. I partitioned my primary windows 7 drive and installed the windows xp on the smaller partition. The windows xp was working fine then I downloaded easybcd and tried to add XP to my OS choices menu, while logged on my XP partition, and then each time I try to load XP from now on I get a blank screen that says Windows could not start because the following file is missing or corrupt: [CODE]
View 14 Replies View RelatedI have a hp dv 6000 i was trying to dual boot my pc with win 7 and xp pro, with win 7 installed first. in order to install xp i had to disable my sata native. I can dual boot but on my xp its seem I'm missing alot of drives. I have no internet or sound,
any suggestions?
I have an Acer Aspire one. It came with XP and I have it dual booting into Windows 7 which is working well which I installed from a USB Drive as this model doesnt have a CD Drive.
In the main boot screen it says "Earlier version of Windows" For XP and "Windows 7" for windows 7. All was working well until yesterday...
Now I can't boot into "Earlier version of Windows" i.e. XP. It gives me the C:\windows\system32\config\system is missing or corrupt message. I can boot into Windows 7 fine but all of my work stuff is on the XP platform (I know I can access the files from "7" but I need to get it operational again).
Any ideas? Can I do a repair from the USB Drive?..I've tried a couple of things to boot from the USB Drive but to no avail. And I can't find the BOOT.INI file from XP (I think it gets moved to Windows 7's hidden boot partition when I installed it. I cant seem to access that partition either).
About 6 months ago I set up a new machine dual boot using GParted with the following configuration:
/dev/sda1 ntfs (Windows 7 system reserved) 100 MB
/dev/sda2 ntfs (Windows7 C: drive) 99 GB (includes 4 GB of preloaded page file space)
/dev/sda3 ntfs (Shared drive - Windows7 E: Drive / Ubuntu sda3) 801 GB
/dev/sda4 extended partition 32 GB
/dev/sda5 ext4 (Linux Root) 30 GB
/dev/sda6 linux-swap 2 GB
I set it up so that I could access my E: drive from either the windows or ubuntu operating system. It has worked perfectly so far (about 6 months). But, here is the problem:For some reason as the share drive (my E: drive / sda3) grows Windows thinks that the windows system drive (sda2/c:drive) is also growing. So that now I have a low storage warning stating that there is only 8.76 GB of free space left on my 99 GB C: drive. When, in reality, there should be about 77 GB of free space. I've made hidden files/folders viewable and downloaded treesizefree so I know what should be on the drive. The Treesizefree output shows the expected 22 GB of space but also shows only 9 GB of free space. So, the missing space is nearly exactly the size of my shared drive (sda3/E:drive). So somehow, I think the windows OS is double counting my shared E: drive against my C: drive.
i have 2 23 inch acer screen. one hdmi and one vga..i have the "turn off display" set for 15 mins but it seems the hdmi (which is the main display) only turns off as the second screen stays on.i know i can just turn off the second display with WinKey and P but sometimes i have to rush out and have work up on both screens
View 9 Replies View RelatedSomewhere along the way, the handler for Windows Media Player disappeared from the DVD Autoplay list. Is there a simple reg fix to put it back? I found one for Media Center, but not WMP.
View 4 Replies View RelatedI'm needing to create a shortcut, but the context menu that normally lists 'new shortcut' is missing. If it were just a shorcut to an exe or something I would just copy and past link, but I'm needing to create a shortcut for 'RunDll32 DwmApi #105'. But I can't seem to do that. I haven't made any changes to my system, so there should be no problems.
View 9 Replies View Relatedfile association in that I can't get to choose any default program from a list. After clicking "Open with" I choose the option of; "Choose default" and get this with everything I try to choose a default for;
"The file does not have a program associated with it for performing this action, please install a program or, if one is installed, create an association in the default program control panel"
I like to use "FYzip" to open all types of zip files/folders as it works well with my expectations but I can't get it or even a photograph to have a default opening program. I have no problem in opening any format of photographs but that's not the issue. I end up doing a blasted Re-Format of my whole Windows 7 home addition?
I used to send files to my mobile phone via Bluetooth option in the "Sent to" menu. A few days ago I found out it was missing. A further few days back, I reinstalled my bluetooth software as its tray icon was missing I have reinstalled bluetooth software but still the "Sent to -> Bluetooth" option is missing and I couldn't find the option to enable it.I am unable to send files via bluetooth unless connected to PC Suite.
View 8 Replies View RelatedIt seems I'm missing a Margin Option.The Margin options available are:Normal
Narrow
Moderate
Wide
Mirrored
Office 2003 Default I'm missing the Office 2003 Default Margin Option.I called Microsoft and was told the option was discontinued but yet the option is clearly noticeable from this link:
Change page margins - Word - [url]...
I am missing the mail recipient option in the sub menu off Send To. I have checked that it is in the send to folder and it is in the shell. The other user on the computer can do this. So I copied that icon and replaced the one that was not working. Same result. I have checked the program defaults. I am using Windows 7 and Outlook 2010.
View 14 Replies View RelatedI am attempting to run a complete system recovery (factory restore) on Windows 7 using a recovery partition. Last time I ran the recovery, I ended up having a lot of problems with system programs not being installed correctly, and with the system administrator account. Now, when I reboot and use the F8 option to bring up the boot options, I do not have an option to "Repair your computer" as I had before. I also tried rstrui.exe through the command prompt, but it only tells me that "No restore points have been created on your computer's drive. To create a restore point open System Protection."
I also checked my drives through DISKPART to make sure there were no problems with the recovery partition, but it is showing up normal. On the Windows knowledge database it said that if the system recovery options are missing, then the system is not installed with the options or they were disabled by the network administrator. Given that I had no problems accessing these the last time I ran the recovery, I'm assuming something happened with the account. I am set up with 1 user in the system, which is the administrator.
1) Re-enabling the options so that I can access the "Repair your computer" options on the boot menu.
2) Run the system recovery options without having to get into the bootup menu.
I've had this issue for a long time and it is that the volume icon wont show up at the bottom right of my screen for my pc, i go to activate it from control panel and its greyed out. I have tried other methods like restarting explorer or going into regedit and doing a bunch of stuff.
View 4 Replies View Relatedi have a new work laptop with xp sp3 on it. I want to install w7 64 bit as a dual boot, but only have 1 physical drive. i cannot remove my current installation as it is pre-build from work, but can partition the drive etc. However on trying to install w7 64 bit I get a message saying cannot install windows 7 on efi drive with mbr, not gpt. Can I do what I want without screwing up my xp installation?
View 5 Replies View RelatedI am trying to install a password recovery cd on laptop. I changed the order in bios but still not giving option too boot from cd. I even logged in as a guest and put an audio cd in .It didnt give option too play. I think its the cd drive. What can I do?
View 1 Replies View Relateddual booting windows 7 home premium x64 with linux fedora 14 on dual independantly dedicated drives. i am a college student with moderate computer (windows) knowledge but am doing software development and would like to play around with some linux for a class. i have no prior experience with linux and have minimal knowledge of operation. i am currently running windows 7 and would like to keep it as my primary os. i do not wish to share media files across drives or os's, windows does that just fine as is and i dont want to get into a third drive. my current drive is a 1tb wd black caviar hdd. it is also currently 2/3rds full and the desktop is about 6 months old so i would rather not partition the drive for a dual boot. i would think that there are some other advantages for the os's operating independantly off their own drives other than if one hdd dies i should still have the other with its os still ok. i have read some topics about RAID configs with dual boot setups with dual drives like this but am not very familiar with RAID. is there a RAID config that would be beneficial in this situation? i currently do not have a RAID card. my tower internals are not very accessible and i dont like the idea of disconnecting drives depending on which os i want to operate.
View 5 Replies View RelatedAs currently configured, XP is on drive C:, Win 7 was added to drive E:, and the system is currently run as a dual boot. Attempting to boot without the XP drive present will yield a "NTLDR is missing" error very early in the boot process.
I have already tried the following:
(1) I moved the hidden Windows Boot Manager files (bootmgr as well as the associated Boot folder) from the XP drive root to the Win 7 drive root.
(2) After physically removing the XP drive, I rebooted to the Win 7 installation DVD, and used the "Repair Your Computer" option to pull up the "Recovery Tools". Then, using the command prompt utility, ...
(3) I attempted to write a new boot sector to the Windows 7 disk using the command: Bootrec /fixboot, - that yields an error though. The Bootrec /fixmbr claimed success, but ultimately did not make Win 7 drive bootable.
I had to reconnect drive C: just to boot into Win 7 again to write this. I do have files backed up, but to format and reinstall files would take many hours beyond just the time to transfer 400 GB of data, since I have dozens of purchased applications that need to be freshly reinstalled and validated as well. Basically I want my E: drive now to be my boot drive while the C: drive is reformatted and used for general storage.
Any idea how to make my Win 7 drive bootable? Do I need a partition program that is more adept at creating a viable boot sector, or is that even the problem?
I had winxp sp3 and Windows 7 7127 x64 on dual boot (xp on c:/ and 7 on d:/)
I replaced xp sp3 with Windows 7 7264 x86 ...at first I couldn't login to Windows 7 7127 because the dual boot seemed to be gone. I fixed it using easybcd so now I have dual boot again for 7127 x64 and 7264 x86 .
The problem is that now when I boot 7127 it has a vista boot screen (probabbly because of easybcd not having a Windows 7 option). How can I change it back to the Windows 7 boot screen? Does anyone have any clues?
Compressed C: and my battery on my laptop died while this was compressing. Turned laptop back on Got the error:Bootmgr is compressed..The problem I'm having is that there is no option to boot from CD Drive. My CD drive is listed in my BIO's but when I go to boot options only my HDD is listed.
View 9 Replies View Relatedwhy my pc is not showing boot from cd option in boot time
View 1 Replies View RelatedI just got a computer for free, a Dell Studio 1555. When I got it, it would try to boot, then come to a screen that said that bootmgr.exe was missing. Sometimes I got a message that said something like mpio.sys was corrupted or missing. I have a Win 7 disk, so I put it in and tried to repair the installation. Each time I ran it, it said that the repair had failed. I tried to reinstall windows 7, and It made it to the first restart in the process. It showed the "Starting Windows" screen, but the colors of the windows logo never appeared, then I got the missing bootmgr screen. I decided to install Ubuntu and see if that worked, and it did (I installed it alongside the Windows installation). It was Ubuntu 10.04. I thought, "OK, so i'll just use this as a Linux machine"...and I decided to go back and reinstall so that I could use the entire hard drive. It never worked correctly again. Each subsequent time that I installed Ubuntu, I was told something along the lines of "Gnome Power Manager did not install correctly" and got a slow and choppy Ubuntu installation.Tried to install 11.10, and it failed completely. I opened the Ubuntu live from my usb drive, and opened the disk utility. I now cannot format, reformat, partition, or delete partitions on the drive. Is all of this just a case of a hard drive on its last legs, or is there something else going on here?
View 1 Replies View RelatedI am attempting a reinstall on a Toshiba satellite C655, my problem is the DVD/CD player is broken, and when I hook up an external USB DVD player and set boot options to USB, it won't recognize it and bypasses to start up screen. Am I missing something in BIOS?
View 4 Replies View Related