I spent the day trying to fix my operating systems boot.
Earlier in the day i tried to install a MacOSX (I've formated the second hard-drive asoff now) on a seperate hard-drive (CRIVE AKA Windows 7 drive was unplugged). After i was done i decided to plug in the c drive because i wanted to get on windows to setup dualboot. But for some reason it said bootmgr missing...
I've tried bootrec /fixboot and the other ones.
I just checked my drive somehow Cdrive turned in to D drive would that be the problem? Could somebody please show me a way to change from D drive to C drive?
If this would help nail the problem. Also tried to boot the hard-drive from my laptop via esata. I get a different problem i get a blue screen during the Windows seven loading screen. Heres the stop code: 0x0000007b.
I partitioned my HD in attempt to dual boot linux. But with a botched install of linux, I am now getting the above error when I try to boot back into windows. I have booted from an install dvd, gone to the command prompt and ran these commands I found in another thread.
I just got a computer for free, a Dell Studio 1555. When I got it, it would try to boot, then come to a screen that said that bootmgr.exe was missing. Sometimes I got a message that said something like mpio.sys was corrupted or missing. I have a Win 7 disk, so I put it in and tried to repair the installation. Each time I ran it, it said that the repair had failed. I tried to reinstall windows 7, and It made it to the first restart in the process. It showed the "Starting Windows" screen, but the colors of the windows logo never appeared, then I got the missing bootmgr screen. I decided to install Ubuntu and see if that worked, and it did (I installed it alongside the Windows installation). It was Ubuntu 10.04. I thought, "OK, so i'll just use this as a Linux machine"...and I decided to go back and reinstall so that I could use the entire hard drive. It never worked correctly again. Each subsequent time that I installed Ubuntu, I was told something along the lines of "Gnome Power Manager did not install correctly" and got a slow and choppy Ubuntu installation.Tried to install 11.10, and it failed completely. I opened the Ubuntu live from my usb drive, and opened the disk utility. I now cannot format, reformat, partition, or delete partitions on the drive. Is all of this just a case of a hard drive on its last legs, or is there something else going on here?
I have Windows 7 installed on my laptop.I want to use some games for Windows xp.But i tried windows xp mode and it want work becouse i have low memory just 1gb in my windows 7 then in windows xp mode i have just 256 mb. And i want to install windows xp in dual boot with windows 7 but when i start windows xp it says program is blocked due compatibility issues?While i dont have cd drive on my Viewsonic laptop i use usb flash drive.When i try to boot windows xp or other software from my usb flash drive it says bootmgr is missing and it cant boot.Please help with that issue also i tried to use startup reapir and recovery disk from my usb flash drive but it want boot recovery disk also?
Last night I tried to absorb a 3gb partition. Tried to shrink, delete... couldn't get it back into c:, so I just made it back into a partition, different letter. I left the disk manager open when I put the computer to sleepAlienware M11x r2.Turned it on this morning, got the bootmgr missing. I dug out the original microsoft disk, plugged in my external firwire cd drive, and tried to boot from there.The setup utility showed the cd drive after I plugged it in, but choosing it doesn't seem to stick. Then rebooting doesn't behave differently. Trying to reboot from network works, says cable not connected.
I have a HP DV9000 Laptop that was originally on Vista. It playing up so I bought a genuine version of Windows 7 to install.. I have put the CD/DVD ROM to boot 1st in BIOS and have saved the changes several times but nothing seems to work??
Also when I press F9 on boot it comes up with Change Boot order and the only option it gives me is.. 4. Netbook Hard Drive?
My pc didn't boot, so I used a SATA --> USB docking station to format my hard drive (NTFS). Then I took an old hard drive, and transfered all of it to my new one.
Now I get the BootMGR is missing error when I boot my pc.
Recently I have had a load of hardware issues which have caused me to replace my PSU and GPU. After doing so to more powerful units, I went to boot up again and got the error: "BOOTMGR is missing"
I have had this before when I remove my secondary HDD and just try and boot from my primary SSD, but after re-connecting the secondary HDD it would work again (telling me this BOOTMGR is on the HDD, even though the Windows files are on the SSD).
I don't know what to make of this as if I boot from the SSD alone nothing happens and it restarts, and if I connect the HDD and it boots then it goes into the System Recovery and after repairing/restoring still won't work. I think the BIOS settings are correct, with the SATA drives set to AHCI (as I'm 99% sure they were before).
My PC specs are: Intel i7 980X Intel DX58SO Motherboard 128GB OCZ Vertex 3 SSD 2TB WD HDD (secondary) Radeon 7850 2GB GFX 8GB DDR3 RAM Windows 7 Ultimate
I wiped my HDD clean with the Ultimate Boot CD and the DBAN application. I formatted a USB device to NTFS and extracted a Windows 7 ISO to it. After I wiped the HDD with DBAN, I formatted the HDD with GParted to NTFS. Now, when I try to Boot the laptop with the USB that has the extracted version of Windows 7, it is telling me that the bootmgr is misssing, when it is on there! I tried buring the ISO to a dvd, but then I got he fabulous stop error message basically telling me that I have bad media (bad DVD). I even tried using an external HDD with the extracted Windows 7 ISO on it and got the same bootmgr is missing error.
Method 1: Message states a fix was made.Root cause found: The partition table does not have a valid System Partition.
Repair action: Partition table repair Result: Completed successfully. Error code = 0x0 However, problem persists after reboot. The wizard indicated that multiple reboots may be necessary, but the wizard does not restart after reboot.
Method 2: Attempted to use Bootrec.exe /FixMbrMessage: The operation completed successfully.
Attempted to use Bootrec.exe /FixBoot Message: Element not found. Attempted to use Bootrec.exe /RebuildBcd Message: Element not found.
Attempted to export and delete the BCD.The command bcdedit /export C:BCD_Backup returned:The store export operation has failed.The requested system device cannot be found.Method 3: When I attempt a system restore, it errors with: To use System Restore, you must specify which Windows installation to restore.When I view the System Recovery Options dialog box, no Windows installation drives are listed.In addition, when I view the C: drive in the DOS window (my Windows installation drive), that drive lists as empty.
i cannot boot my Windows 7 64 bit Dell Studio 1558.Cannot boot to Windows.Error(s)BOOTMGR IS MISSING , CTRL + ALT + DEL TO RESTART. Description:
1. Initally had two partitions .. C and D .. 2. Tried to merge C and D to make C more by using Partiton Wizard. 3. Computer Restarted. 4.BSOD at Starting windows logo 5. Stuck at boot. 6. Launched Windows repair. 7. Unable to do repairs. 8. Dell restore unable to locate present installation. ( "current installation : (Unknown) at Unknown drive) 9. Checked partitions using DISKPART at command prompt. 10. Tried to change active partition . Restarted. 11. BOOTMGR MISSING ERROR. Dont even go to startup repair. 12. DVD DRIVE of LAPTOP NOT WORKING so made Windows Startup repair USB bootable. 13. Now have Access to Recovery Menu. 14. Made Partition Wizard Bootable USB . Now have access to Partition Wizard Also. 15. Tried installing Windows 7 using USB. Got error "installation error. verify windows sources are accessible Windows 7 Instalation Problem - Error Code 0xC0000005. 16. Stuck at boot now.
I checked OS drive in partition wizard bootable , it is intact..Windows installation is there....Every drive is ok but somehow booting not from that drive.I will attach photographs of Partition Wizard Partiton status.
Basically what originally happened was that I tried installing windows 7 off of my hard drive and during the "completing installation" phase the computer lost power and was shut down. Turning the computer back on iIhad a screen which said something of the likes of set up is starting. From then on I was in a infinite boot loop where it would give me a set up screen and restart. I desperately needed to backup my files which I did not bother to do so.
I used my secondary desktop running vista, plugged in my other hard drive and backed up all my files successfully. I thought I would format the disk since I was done backing up all my data and I would go right on ahead and install a fresh windows 7 via the CD. I go into bios and set the windows CD to boot and I unplug my vista hard drive and leave only the formatted 1TB HD plugged in. And now I get the "BOOTMGR is missing" error. As I have read it's due to deleting everything off the hard drive including the...bootmanager.
Now with the tools that I hold (mobo with bios access, windows 7 installation CD, another hard drive with Vista). How shall I go about getting my hard drive ready to install a fresh copy of windows 7. I have the retail cd, I have another HD with vista if needed, and I have the clean hard drive which i would wish to install windows 7. I set my bios to boot via the CD first and put in the disc and let it work it's magic, I would like to point out that it still gives me a BOOTMGR error. It asks me to press a key to load from the CD and then I get the error that I know is coming.
I have a hp G71-449WM Notebook running Windows7 premium 64bit. I can't boot computer the repair disc I have doesn't seem to work. I have no installation disc to fall back on and I can not seem to get it to boot in safe mode. Right now its asking me to find the needed driver in the driver folders. Unless it's called something else I do not see a bootmgr driver. Right now its asking me to connect to the network which would be cool but i don't know what folder they where asking me to type in.
So I tried installing Windows on my new machine and did waht seemed to be the recommended thing and plugged in only my SSD into the Sata port, leaving my other drives unplugged until after the installation. Everything went fine and I was able to get Windows 7 up, drivers were installing and everything was peachy, but Then I plugged in my other drives, and when I did so with the computer running Windows immediately recognized them and I could access them, as well as do whatever I wanted. However when I restarted I got the message BOOTMGR is missing.
Now, you may be thinking that this is a simple issue of it trying to load from one of those other HDDs, just set the boot order in the BIOS blah blah. But its not. I set the boot order in the BIOS to use the SSD, I set the SSD to the top of the list within the HDDS priority order and still nothing. I then took it a step further and instead of selecting the order manually told it to boot from the SSD flat out, boot from this drive and the same error message came up. I already did the boot from Windows disc, startup repair thing - didn't work.
I have just installed a new P5G41T-M LX Series motherboard and two DDR3 x 2GB replacing DDR2. During startup a message says BOOTMGR is missing, press Ctrl Alt Delete to restart, on restart the same message is repeated.
I need a dual boot setup. I have a new 320 GB SATA hard drive and I need to replace an old 80 GB hard drive. I have a Windows XP Home disc that came with the machine and the Windows 7 Professional Upgrade disc. What do I need to do in order to have a painless dual boot setup. I want to be able to choose before the system starts booting.
Yesterday I tried To install the last RC before RTM v7600.16385 64bit on my dv9000
I am currently running RC7100 no problems yet... since May, So i started installing this newest build on my spare HDD (drive F) I was looking to try out the latest as a dual boot situation (at least that was my original plan) So I set Off- and it looked suspiciously like it was erasing my drive C plus it hung up on install(or I got Paranoid and canceled the install) either way after the cancellation it rolled back to previous state(no files were harmed...)but now on my boot screen it offers me windows set-up and below that in the list windows 7 Ultimate(recovered) it never did that before when I select Set Up it goes into the 7 set up screen (light blue with plants) and restarts continually never finishes ... that is the first thing, Secondly when I select windows 7 ult.
(recovered) it boots normal! How do i remove the option for "Set Up" under the boot screen and also change the windows 7 Recovered back to normal, I tried restoring to a previous State using System restore and selected a point 3 days prior to yesterday but on start up it does the same thing The set up is first on the boot list How can I get my system back to normal I cant do a fresh install I have to much valuable stuff that i cant risk losing I tried restore and it apparently didnt help, what else can I do...Will a repair install help and if so Will it erase any programs and personal Data such as Itunes Libraries and photos and misc.. programs and will it dump the other set up on the boot screen?
I have 3 hard drives in my computer. One for Windows XP Professional, one for Windows 7 Ultimate and one just for storage. My question is can I change my Windows 7 installation to 64 bit and still be able to run XP?
I am at a bit of a loss here in regards to partitions, as I've never really done it, I want to configure a new system setup under the following circumstances:
SSD(1): (dual-boot OS drive) + Partition 1: Windows 7 + Partition 2: Windows Server 2012
SSD(2): (program / file drive) + Partition 1: one large single partition for application / program storage; e.g., Visual Studio 2012 and SharePoint Server 2013.
I need to have an instance of Windows Server to use SharePoint Server. At times I will want to run the server set-up to facilitate TFS and SharePoint with a very small team of developers, school related for example. And at other times I would like to boot into Windows 7 Ultimate so I can have a normal browsing experience and play games, etc. But of course I could also develop with VS11.X in Win 7 environment if needed.
My question, is what I'm proposing possible? I want to use Windows 7 normally most the times, but at others I will require Server 2012 to use SharePoint. Can I share the same program resources on the second SSD regardless what OS I boot into? What issues may rise if I tried running SharePoint (or just having SharePoint) while booted into Windows 7? Will I have to create two partitions on the 2nd SSD, a copy of apps for each OS due to system registry constraints.
I have dual boot with Xp and windows 7.when i log into my Xp all the restore points being deleted from windows 7.when i check the disk management information in 7 it shows windows 7 create a logical drive with my Xp primary drive.even i am hide the drive from both windows means Xp drive from windows 7 and vice verse.So i like to unmount or remove the drive partition of windows 7 from Xp and Xp primary from windows 7.So that they dont affect each others system files with being deleted the partitions.
Just today I decided to download the Windows 8 consumer preview and setup my PC to dual boot with it.I am running Windows 7 home premium 64bit and the 64 bit windows 8 on my other partition. After setting up a separate partition on my hard drive and loading windows8 to this partition, I was all up and running. I had no problems setting up or running windows 8, the problem came when I booted back to windows 7 for the first time. When I booted into windows 7, I was getting the "unable to identify network" error, and no network connectivity.
First thing I tried was simply disable/enabling my network adapter thinking it was just some hiccup. No luck there. Next I pulled the power from my router, and let it completely reboot. Still no luck. I then shut down my pc and booted back into windows 8 and sure enough I am able to get internet connectivity when I am running windows 8. This got me to thinking that when I loaded windows 8 there may be some new drivers installed for my network card that are somehow causing issues when I load into windows 7 again. Not sure how this is possible.
I was under the understanding that when I loaded Win8 to the separate partition that it would keep all it's drivers and settings there and not effect anything when I was loaded back on windows 7 (This logic could be completely wrong, I don't know). So I rebooted and loaded back into windows 7, went into device manager and uninstalled both network adapters and drivers, and rebooted into windows 7 again so it could re-discover and setup the network cards with default windows 7 drivers. This did not work either and I am still getting the same error.
The motherboard died on my 3-year-old Compaq, so I just ordered a new computer that comes preloaded with Win7Home Prem x64. It was from Dell Outlet so I couldn't choose the OS. I've been using MCE (XP pro 32-bit) for several years and love it.I'm worried about program and hardware compatibility with Windows 7 x64. I don't use very graphics-heavy apps like CADD, Photoshop, etc. I only plan to do a little video editing with my .avi clips. I also have an older version of Replay AV that I use to record live streaming radio. I don't want to buy a new scanner (Canoscan LiDE 20 - no x64 drivers!) so here are my options:
A-Partition the new 1TB drive for dual boot setup with Windows 7 Home x64 / WinXP Pro (32-bit). I would buy the XP Pro OEM Branded DVD.
B-Install my old 200GB SATA Seagate Barracuda 7200 as a second drive and run XP programs and scanner from that.
C-Buy Win 7 Pro 32-bit OEM Branded discs, remove Windows 7 home x64, and do a complete new install with the new discs, and hope that my XP programs work with XP Mode. (new i5 processor supports virtualization)
i have windows xp as my primary boot windows and windows 7 as my secoundary windows ,xp is on c drive and 7 is on d drive my windows xp create a problem so i install a fresh a copy of xp now my xp is working properly but dual boot option is missing that shown on startup
I have two disks 0 & 1 in my PC & each has two partitions. I had first installed Win xp on 1st Partition of Disk1 & checked the system is running perfectly. Afterwards I installed Win7 on 1st Partition of Disk 0 & checked the system booting/working in Win7 perfectly but now I can't acces my Winxp. Whenever I try to boot from Disk 1 it gives a message "NTDLR missing".
have a Toshiba Satellite A505-S6980 Windows 7 Home Edition Premium Edition laptop. I recently tried to dual boot with Windows XP Professional service pack 3 iso cd. I partitioned my primary windows 7 drive and installed the windows xp on the smaller partition. The windows xp was working fine then I downloaded easybcd and tried to add XP to my OS choices menu, while logged on my XP partition, and then each time I try to load XP from now on I get a blank screen that says Windows could not start because the following file is missing or corrupt: [CODE]
I have a hp dv 6000 i was trying to dual boot my pc with win 7 and xp pro, with win 7 installed first. in order to install xp i had to disable my sata native. I can dual boot but on my xp its seem I'm missing alot of drives. I have no internet or sound,
I have an Acer Aspire one. It came with XP and I have it dual booting into Windows 7 which is working well which I installed from a USB Drive as this model doesnt have a CD Drive.
In the main boot screen it says "Earlier version of Windows" For XP and "Windows 7" for windows 7. All was working well until yesterday...
Now I can't boot into "Earlier version of Windows" i.e. XP. It gives me the C:\windows\system32\config\system is missing or corrupt message. I can boot into Windows 7 fine but all of my work stuff is on the XP platform (I know I can access the files from "7" but I need to get it operational again).
Any ideas? Can I do a repair from the USB Drive?..I've tried a couple of things to boot from the USB Drive but to no avail. And I can't find the BOOT.INI file from XP (I think it gets moved to Windows 7's hidden boot partition when I installed it. I cant seem to access that partition either).
My computer can no longer boot into windows, and i get the following message when starting up my system:
"BOOTMGR IS MISSING press ctrl+alt+del to restart."
After some googling and trying to solve my issue, I run a startup repair as i have found that to be the most common issue with this problem I have, but with no success. when I run the startup repair from the recovery disk i get the following description of why it cannot run the startup repair:
------------------------------ Name: Disk failure diagnosis Result: completed successfully. Error code = 0x0 Time taken = 110ms
[code]....
Note: my hard drive makes some kind of *click* noise - and it happened suddenly after rebooting my system, aswell as I getting the error.
I set it up so that I could access my E: drive from either the windows or ubuntu operating system. It has worked perfectly so far (about 6 months). But, here is the problem:For some reason as the share drive (my E: drive / sda3) grows Windows thinks that the windows system drive (sda2/c:drive) is also growing. So that now I have a low storage warning stating that there is only 8.76 GB of free space left on my 99 GB C: drive. When, in reality, there should be about 77 GB of free space. I've made hidden files/folders viewable and downloaded treesizefree so I know what should be on the drive. The Treesizefree output shows the expected 22 GB of space but also shows only 9 GB of free space. So, the missing space is nearly exactly the size of my shared drive (sda3/E:drive). So somehow, I think the windows OS is double counting my shared E: drive against my C: drive.
