Setup A Dual Boot Never Finished
Sep 18, 2009
Yesterday I tried To install the last RC before RTM v7600.16385 64bit on my dv9000
I am currently running RC7100 no problems yet... since May, So i started installing this newest build on my spare HDD (drive F) I was looking to try out the latest as a dual boot situation (at least that was my original plan) So I set Off- and it looked suspiciously like it was erasing my drive C plus it hung up on install(or I got Paranoid and canceled the install) either way after the cancellation it rolled back to previous state(no files were harmed...)but now on my boot screen it offers me windows set-up and below that in the list windows 7 Ultimate(recovered) it never did that before when I select Set Up it goes into the 7 set up screen (light blue with plants) and restarts continually never finishes ... that is the first thing, Secondly when I select windows 7 ult.
(recovered) it boots normal! How do i remove the option for "Set Up" under the boot screen and also change the windows 7 Recovered back to normal, I tried restoring to a previous State using System restore and selected a point 3 days prior to yesterday but on start up it does the same thing The set up is first on the boot list How can I get my system back to normal I cant do a fresh install I have to much valuable stuff that i cant risk losing I tried restore and it apparently didnt help, what else can I do...Will a repair install help and if so Will it erase any programs and personal Data such as Itunes Libraries and photos and misc.. programs and will it dump the other set up on the boot screen?
View 9 Replies
ADVERTISEMENT
Jan 24, 2011
I need a dual boot setup. I have a new 320 GB SATA hard drive and I need to replace an old 80 GB hard drive. I have a Windows XP Home disc that came with the machine and the Windows 7 Professional Upgrade disc. What do I need to do in order to have a painless dual boot setup. I want to be able to choose before the system starts booting.
View 6 Replies
View Related
Sep 28, 2009
I have xp 32bit and 7 64bit on a dualboot and 7 is the default, however I want to change that.
View 7 Replies
View Related
Feb 21, 2011
I have 3 hard drives in my computer. One for Windows XP Professional, one for Windows 7 Ultimate and one just for storage. My question is can I change my Windows 7 installation to 64 bit and still be able to run XP?
View 4 Replies
View Related
Aug 24, 2009
I spent the day trying to fix my operating systems boot.
Earlier in the day i tried to install a MacOSX (I've formated the second hard-drive asoff now) on a seperate hard-drive (CRIVE AKA Windows 7 drive was unplugged). After i was done i decided to plug in the c drive because i wanted to get on windows to setup dualboot. But for some reason it said bootmgr missing...
I've tried bootrec /fixboot and the other ones.
I just checked my drive somehow Cdrive turned in to D drive would that be the problem? Could somebody please show me a way to change from D drive to C drive?
If this would help nail the problem. Also tried to boot the hard-drive from my laptop via esata. I get a different problem i get a blue screen during the Windows seven loading screen. Heres the stop code: 0x0000007b.
View 9 Replies
View Related
Jan 15, 2013
I am at a bit of a loss here in regards to partitions, as I've never really done it, I want to configure a new system setup under the following circumstances:
SSD(1): (dual-boot OS drive)
+ Partition 1: Windows 7
+ Partition 2: Windows Server 2012
SSD(2): (program / file drive)
+ Partition 1: one large single partition for application / program storage; e.g., Visual Studio 2012 and SharePoint Server 2013.
I need to have an instance of Windows Server to use SharePoint Server. At times I will want to run the server set-up to facilitate TFS and SharePoint with a very small team of developers, school related for example. And at other times I would like to boot into Windows 7 Ultimate so I can have a normal browsing experience and play games, etc. But of course I could also develop with VS11.X in Win 7 environment if needed.
My question, is what I'm proposing possible? I want to use Windows 7 normally most the times, but at others I will require Server 2012 to use SharePoint. Can I share the same program resources on the second SSD regardless what OS I boot into? What issues may rise if I tried running SharePoint (or just having SharePoint) while booted into Windows 7? Will I have to create two partitions on the 2nd SSD, a copy of apps for each OS due to system registry constraints.
View 1 Replies
View Related
Mar 3, 2012
Just today I decided to download the Windows 8 consumer preview and setup my PC to dual boot with it.I am running Windows 7 home premium 64bit and the 64 bit windows 8 on my other partition. After setting up a separate partition on my hard drive and loading windows8 to this partition, I was all up and running. I had no problems setting up or running windows 8, the problem came when I booted back to windows 7 for the first time. When I booted into windows 7, I was getting the "unable to identify network" error, and no network connectivity.
First thing I tried was simply disable/enabling my network adapter thinking it was just some hiccup. No luck there. Next I pulled the power from my router, and let it completely reboot. Still no luck. I then shut down my pc and booted back into windows 8 and sure enough I am able to get internet connectivity when I am running windows 8. This got me to thinking that when I loaded windows 8 there may be some new drivers installed for my network card that are somehow causing issues when I load into windows 7 again. Not sure how this is possible.
I was under the understanding that when I loaded Win8 to the separate partition that it would keep all it's drivers and settings there and not effect anything when I was loaded back on windows 7 (This logic could be completely wrong, I don't know). So I rebooted and loaded back into windows 7, went into device manager and uninstalled both network adapters and drivers, and rebooted into windows 7 again so it could re-discover and setup the network cards with default windows 7 drivers. This did not work either and I am still getting the same error.
View 5 Replies
View Related
Feb 27, 2010
How to Load SATA Drivers in Windows XP Setup on Dual Boot PC ?
View 0 Replies
View Related
Nov 11, 2010
The motherboard died on my 3-year-old Compaq, so I just ordered a new computer that comes preloaded with Win7Home Prem x64. It was from Dell Outlet so I couldn't choose the OS. I've been using MCE (XP pro 32-bit) for several years and love it.I'm worried about program and hardware compatibility with Windows 7 x64. I don't use very graphics-heavy apps like CADD, Photoshop, etc. I only plan to do a little video editing with my .avi clips. I also have an older version of Replay AV that I use to record live streaming radio. I don't want to buy a new scanner (Canoscan LiDE 20 - no x64 drivers!) so here are my options:
A-Partition the new 1TB drive for dual boot setup with Windows 7 Home x64 / WinXP Pro (32-bit). I would buy the XP Pro OEM Branded DVD.
B-Install my old 200GB SATA Seagate Barracuda 7200 as a second drive and run XP programs and scanner from that.
C-Buy Win 7 Pro 32-bit OEM Branded discs, remove Windows 7 home x64, and do a complete new install with the new discs, and hope that my XP programs work with XP Mode. (new i5 processor supports virtualization)
View 9 Replies
View Related
Apr 15, 2012
I wanted a computer that will last a while and be strong enough for some games I am not a big gamer, But I do have a few I play. [code] I have built many many computers in the past.I have only had one that gave me trouble as there was a pinning that was hidden. Since then I have built at least 8 with out trouble.So I went about collecting parts and building.I go to turn it on and only a flash of light at all of the lights. Then shuts down and nothing.I wait a few minutes and try again.i get the same result a flash of the fan lights then nothing so I am at a loss as to what is wrong.I changed cases, and I chaanged power supplies at different intervals. Nothing. i changed the case to a different one. and still no change.I have not changed the RAM. Nor the CPU. But I did try a different Mother board with the same cpu and ram. Still not change.I am to presume that I have a bad cpu and or ram, or these items do not like each other.
View 2 Replies
View Related
Apr 19, 2012
Computer will not boot up. I have to push f12 and do it manually then it works, only way.
View 2 Replies
View Related
Dec 26, 2012
I reinstalled Windows 7 on my laptop yesterday (a recovery reinstall, not a clean one). The install worked fine, I'm able to boot up and use all my programs again no prob, but when I attempt to go into Safe Mode, it thinks Windows hasn't completed the install. While the message "Setup is starting services" is on the screen, a popup appears saying "Windows cannot complete installation in Safe Mode. To continue installing Windows, restart the computer"I'm thinking there's got to be a simple registry key fix for this but am having a bear of a time finding anything applicable online.I don't have an urgent need to use Safe Mode, btw, just doesn't seem right not having it available should I need to
View 5 Replies
View Related
Sep 12, 2011
i have a new work laptop with xp sp3 on it. I want to install w7 64 bit as a dual boot, but only have 1 physical drive. i cannot remove my current installation as it is pre-build from work, but can partition the drive etc. However on trying to install w7 64 bit I get a message saying cannot install windows 7 on efi drive with mbr, not gpt. Can I do what I want without screwing up my xp installation?
View 5 Replies
View Related
Sep 7, 2009
I am having a issue setting up 2 monitors. I think maybe I cant run one through my graphic card and my VGA port on my motherboard at the same time.... Right now I am running my monitor through a nvidia 8400 gs but I thought I could run another on my VGA port on the motherboard also.
View 9 Replies
View Related
Dec 1, 2009
i have:
Windows XP pro (32 bit)
nVida GeForce FX 5200 has VGA;DVI;SVideo
ok heres what i did b4
i had 2 monitors one vga one and one dvi one and i hooked it up and i had i good dual monitor setup but when ever i loaded some programs the would give me a bsod screen and restart for example fsx dark basic and others that change resolution.
now....
i re installed nvida drivers and there updated (i think)
i have the DVI monitor hooked up right now with 1 display only
i have the desktop manager software enabled and running and the Nvida control pannel running.
and what i want to now is that i want to have a horizontal span setup (reason):
ok well i have seen that FSX can run on 2 monitors and that you can have a really cool display with both displaying images can i do this on a dual monitor setup or not or do i need to get a better card (preferably not)?
What to i do now?
ok so do i go to set up multipul monitors and do it that way or is there another way to do it better theres one last question, well i herd from a friend that in the display options like when you right click in the desktop then goto properties then settings. the friend said that there was an option to enable dual monitor support. before i had my setup i did not see that option and neither do i now im guessing that i don't have 2 monitors hooked up now.
I am obsessed about getting this to work so if i am making any of you people here mad i'm sorry and Thank-You for the help that you have given me recently, btw i got my processor to work and i got it hyperthreaded..
View 2 Replies
View Related
Jan 12, 2010
The bosses wife has a new Toshiba P500 configured with a 64gSSD as a C: drive and a 320gHHD for a D: drive. I'm about to take it from Vista to W7. While backing it up I noticed the SSD was full. Since it's the C: drive windows is storing everything on it.
I would imagine that the best thing would be to put the OS on the SSD and everything else on the HHD, but if the user uses My Documents, My Music, My Pictures etc. folder it will all go on the SSD drive and fill it up. Does anyone know a quick fix to make W7 store data on the D: drive? Any other ideas on how I should set this up for a 'non power user' user?
View 3 Replies
View Related
Aug 12, 2009
I have two monitors, and would like to setup a different wallpaper for each monitor while retaining the expanded screen option. How to go about that? I am using a Radeon 4770 HD if that helps.
View 9 Replies
View Related
Oct 27, 2009
I'm setting up Dual Monitors on my HIS Radeon 4870 1GB GPU. This GPU has 1 x VGA and 1 x DVI output. I have two identical ASUS VW222u monitors. I have installed the latest ATI Catalyst Suite and drivers for this GPU and have Windows 7 up and running with BOTH monitors.
My issue, however, is my primary monitor (DVI output) is running at my ideal resolution of 1680 x 1050, but my second monitor (VGA output) can not run at this resolution. It is only allowing me to choose from a small specific number of resolutions, and 1680 x 1050 is not included (closest is 1600 x 1200, IIRC).
The ATI Catalyst Control Centre is telling me the primary monitor is my ASUS VW222u (Digital), which is correct, but my 2nd monitor is only described as a "Generic Non-PnP CRT Monitor", despite installing the correct monitor drivers etc.
Is this because I am running this second monitor of the VGA output? Will that cause my monitor to not be able to produce my desired 1680 x 1050 resolution? And will running it off the VGA output mean It thinks its a CRT?
View 1 Replies
View Related
Apr 3, 2009
On my Windows 7 partition I am unable to use my laptop screen and my 27" LCD Samsung TV as a monitor simultaneously. This was not an issue on my XP partition. I have updated drivers on my video card to no avail.
My TV is connected via a VGA cable. If this cable is connected when I turn my computer on, it will display on the monitor only (but at a much lower resolution than my XP partition allowed) and I am unable to switch back to my laptop monitor without restarting. My display settings wont even recognize that both are connected. Any help would be greatly appreciated.
View 2 Replies
View Related
Feb 4, 2011
dual booting windows 7 home premium x64 with linux fedora 14 on dual independantly dedicated drives. i am a college student with moderate computer (windows) knowledge but am doing software development and would like to play around with some linux for a class. i have no prior experience with linux and have minimal knowledge of operation. i am currently running windows 7 and would like to keep it as my primary os. i do not wish to share media files across drives or os's, windows does that just fine as is and i dont want to get into a third drive. my current drive is a 1tb wd black caviar hdd. it is also currently 2/3rds full and the desktop is about 6 months old so i would rather not partition the drive for a dual boot. i would think that there are some other advantages for the os's operating independantly off their own drives other than if one hdd dies i should still have the other with its os still ok. i have read some topics about RAID configs with dual boot setups with dual drives like this but am not very familiar with RAID. is there a RAID config that would be beneficial in this situation? i currently do not have a RAID card. my tower internals are not very accessible and i dont like the idea of disconnecting drives depending on which os i want to operate.
View 5 Replies
View Related
Dec 1, 2009
Quite often I find with games on a dual monitor setup is that Id find the cursor is on the other monitor and if I accidentally click there I lose focus of the game and some games wont tab back in.
Is there any way to prevent the cursor going outside the game in fullscreen?
View 2 Replies
View Related
Nov 10, 2011
When win 7 open up, what I see on my single display is a desktop screen of a tipical secondary display that would be placed on the right of the main screen.
I go into desktop properties and I see that win7 detect and show 2 screens as if I had a dual screen setup. But I only have one 24" screen. I always need to ask win7 to "detect" the screens again, then it automaticly delete the second "non-existent" screen.
My setup is Dell Sudio XPS 9100
I7 930
5870 geforce
12go ram
win7
View 17 Replies
View Related
Feb 1, 2010
I know some people have been asking questions concerning 3 monitors on Windows 7, but they don't answer the question for me (i think).
My system is an ASUS P7P55D-E Pro, Core i7-860 2.8Ghz and dual GeForce GTX 275 1.7 GB.
I've spent a good couple of hours to get this to work or reading up on it, but I just have a 3rd monitor sitting here.
View 2 Replies
View Related
Nov 12, 2009
As currently configured, XP is on drive C:, Win 7 was added to drive E:, and the system is currently run as a dual boot. Attempting to boot without the XP drive present will yield a "NTLDR is missing" error very early in the boot process.
I have already tried the following:
(1) I moved the hidden Windows Boot Manager files (bootmgr as well as the associated Boot folder) from the XP drive root to the Win 7 drive root.
(2) After physically removing the XP drive, I rebooted to the Win 7 installation DVD, and used the "Repair Your Computer" option to pull up the "Recovery Tools". Then, using the command prompt utility, ...
(3) I attempted to write a new boot sector to the Windows 7 disk using the command: Bootrec /fixboot, - that yields an error though. The Bootrec /fixmbr claimed success, but ultimately did not make Win 7 drive bootable.
I had to reconnect drive C: just to boot into Win 7 again to write this. I do have files backed up, but to format and reinstall files would take many hours beyond just the time to transfer 400 GB of data, since I have dozens of purchased applications that need to be freshly reinstalled and validated as well. Basically I want my E: drive now to be my boot drive while the C: drive is reformatted and used for general storage.
Any idea how to make my Win 7 drive bootable? Do I need a partition program that is more adept at creating a viable boot sector, or is that even the problem?
View 9 Replies
View Related
Dec 24, 2012
I tried out Windows 8 for a while. Unfortunately, many of the video games I play crashed a lot, and well, to make a short story short, I have reinstalled Windows 7. One of the features I really liked in Windows 8 is that with a dual monitor set up, my desktop backgrounds not only rotated, but were not synchronized like in Windows 7. For instance, I could have a Battlefield 3 background on one, and a Company of Heroes background on the other... while on Windows 7, if I have Battlefield 3 on one, it will be the same thing on the other display. I can't seem to work out an option to have different "unsynchronized" desktops rotating..
View 1 Replies
View Related
Jan 15, 2013
I have a AMD Radeon HD 6300 series adapter, running windows 7 x64.I have a dual monitor setup,the same monitor on each port an Acer S230hl. One port is an HDMI the other is a VGA. the issue i have is that when i have a worksheet open i can see the gridlines to the cells on the HDMI connected monitor, if i move the sheet over to the vga monitor the gridlines are so light i cannot make out the different cells. it looks like one clean sheet of white paper.i tried different contrast and brightness settings and no luck.
View 3 Replies
View Related
Feb 27, 2012
how can i set up dual monitor display on my imac running window 7 with parallels? I have no problem when I run mac but when I run window, dual display doesn't work. I heard AND radeon has some problem with window 7 display setting.
View 1 Replies
View Related
Nov 30, 2012
I am trying to setup dual monitors will the graphics card support that function:
Intel(R) G33/G31 Express Chipset Family
View 4 Replies
View Related
May 24, 2011
Right, i'll try to explain it not to detailed; -Was multitasking between online videos and facebook, when suddenly one of those 'Do you trust 'such and such'' windows came up (with the dimed background). -I cannot remember what it said but it wouldnt let me press 'No'. -So I had to trust it (but I would have pressed 'Yes' anyway). -So when it went away, displayed on my screen was a new window, and again I didn't really look at it, but I defintely remember that it was an error window. Again I pressed yes, and this was because I didn't understand a word of it.This is where my problem comes in; -After pressing 'yes' the computer restarts and comes up with a 'System Repair' screen, tells me that its looking for the problem. -When finished it says 'Unable to repair' or something along those lines, and then followed by 'remove all external hardware (mp3s, controllers etc) and try again' -I do this, doesnt work same screen. -And now i'm stuck. EDIT: Its the 'Startup Repair' option/window in the 'System Recovery Options' window.
View 3 Replies
View Related
Sep 8, 2012
Few week aago, I posted a thread about my Windows update never finish and I need to power off my PC to be able to regain control.One of you, did suggested to use a Windows update utility and it worked for that time. Now, it keep coming back again and again.How can I determine witch Windows update keep causing problem. How can I avoid that.Anytime I need to turn off my PC, I need to remove the automatic update.
View 3 Replies
View Related
Jun 24, 2012
I recently got an Asus G74 (great for gaming, by the way) after my old laptop died.the only thing I don't like is how my fingerprints show up on the matte (ruberized plastic) finish on some of the computer. how to legitamately clean it? And is it safe to lightly wipe it down with water? Or how about windex?
View 3 Replies
View Related
