Few week aago, I posted a thread about my Windows update never finish and I need to power off my PC to be able to regain control.One of you, did suggested to use a Windows update utility and it worked for that time. Now, it keep coming back again and again.How can I determine witch Windows update keep causing problem. How can I avoid that.Anytime I need to turn off my PC, I need to remove the automatic update.
View 3 Replies
Computer will not boot up. I have to push f12 and do it manually then it works, only way.
View 2 Replies View RelatedRight, i'll try to explain it not to detailed; -Was multitasking between online videos and facebook, when suddenly one of those 'Do you trust 'such and such'' windows came up (with the dimed background). -I cannot remember what it said but it wouldnt let me press 'No'. -So I had to trust it (but I would have pressed 'Yes' anyway). -So when it went away, displayed on my screen was a new window, and again I didn't really look at it, but I defintely remember that it was an error window. Again I pressed yes, and this was because I didn't understand a word of it.This is where my problem comes in; -After pressing 'yes' the computer restarts and comes up with a 'System Repair' screen, tells me that its looking for the problem. -When finished it says 'Unable to repair' or something along those lines, and then followed by 'remove all external hardware (mp3s, controllers etc) and try again' -I do this, doesnt work same screen. -And now i'm stuck. EDIT: Its the 'Startup Repair' option/window in the 'System Recovery Options' window.
View 3 Replies View RelatedI recently got an Asus G74 (great for gaming, by the way) after my old laptop died.the only thing I don't like is how my fingerprints show up on the matte (ruberized plastic) finish on some of the computer. how to legitamately clean it? And is it safe to lightly wipe it down with water? Or how about windex?
View 3 Replies View RelatedYesterday I tried To install the last RC before RTM v7600.16385 64bit on my dv9000
I am currently running RC7100 no problems yet... since May, So i started installing this newest build on my spare HDD (drive F) I was looking to try out the latest as a dual boot situation (at least that was my original plan) So I set Off- and it looked suspiciously like it was erasing my drive C plus it hung up on install(or I got Paranoid and canceled the install) either way after the cancellation it rolled back to previous state(no files were harmed...)but now on my boot screen it offers me windows set-up and below that in the list windows 7 Ultimate(recovered) it never did that before when I select Set Up it goes into the 7 set up screen (light blue with plants) and restarts continually never finishes ... that is the first thing, Secondly when I select windows 7 ult.
(recovered) it boots normal! How do i remove the option for "Set Up" under the boot screen and also change the windows 7 Recovered back to normal, I tried restoring to a previous State using System restore and selected a point 3 days prior to yesterday but on start up it does the same thing The set up is first on the boot list How can I get my system back to normal I cant do a fresh install I have to much valuable stuff that i cant risk losing I tried restore and it apparently didnt help, what else can I do...Will a repair install help and if so Will it erase any programs and personal Data such as Itunes Libraries and photos and misc.. programs and will it dump the other set up on the boot screen?
Each time I uninstall a program, after it completes and I try to uninstall another, I get the following message: "Please Wait Until The Current Program is Finished Uninstalling or Being Changed". Why?
View 6 Replies View RelatedI wanted a computer that will last a while and be strong enough for some games I am not a big gamer, But I do have a few I play. [code] I have built many many computers in the past.I have only had one that gave me trouble as there was a pinning that was hidden. Since then I have built at least 8 with out trouble.So I went about collecting parts and building.I go to turn it on and only a flash of light at all of the lights. Then shuts down and nothing.I wait a few minutes and try again.i get the same result a flash of the fan lights then nothing so I am at a loss as to what is wrong.I changed cases, and I chaanged power supplies at different intervals. Nothing. i changed the case to a different one. and still no change.I have not changed the RAM. Nor the CPU. But I did try a different Mother board with the same cpu and ram. Still not change.I am to presume that I have a bad cpu and or ram, or these items do not like each other.
View 2 Replies View RelatedWhen install sql server 2005 work and alomost finished error whit a service.What to do?
View 4 Replies View RelatedI reinstalled Windows 7 on my laptop yesterday (a recovery reinstall, not a clean one). The install worked fine, I'm able to boot up and use all my programs again no prob, but when I attempt to go into Safe Mode, it thinks Windows hasn't completed the install. While the message "Setup is starting services" is on the screen, a popup appears saying "Windows cannot complete installation in Safe Mode. To continue installing Windows, restart the computer"I'm thinking there's got to be a simple registry key fix for this but am having a bear of a time finding anything applicable online.I don't have an urgent need to use Safe Mode, btw, just doesn't seem right not having it available should I need to
View 5 Replies View RelatedI just bought myself some new parts for a new computer I built. After buying the parts and assembling it I tried to install windows 7, keeping in mind that this computer has no previous os installed in it, completely blank. I somehow managed to get to safe mode and install till the part where it says expanding windows files completing that step fully and rebooting to continue the installation, I have no idea why but after when it restarts, it freezes at the "starting windows" screen with the four orb animation. It should just go to the next screen with the blue wallpaper asking me for the language I would like and what not. But it just gets stuck there and doesn't move on, I tried
rebooting
removing as much devices I had plugged into the motherboard
removing everything but the mouse and key board
removing the graphics card
removing one of the two sticks of ram
[code]...
I have tried everything I know of and I don't think I need to update my bios because no one else has encountered this problem. Swell I am not very good with computers I am very new to this so...I also heard about updating drivers , but don't u need to actually be able to login to your computer to download and install them? I can't even log in, I wait for the windows logo to pass but it never does please help Tom Hardware community.
I'm out of ideas. I've been running Win 7 on this machine for more than a year without issues in updating etc. Now it will not search or update/install critical items. I'm running Symantec (even tried turning the firewall off without any success). I get an error code 80072F7C. When I run hijackthis, I get an error message that my system denied write access to the Hosts file. I proceed with the scan but am unable to produce a log file. I've included a screenshot from the windows update error as well as the error I get when trying to run hijack this.
View 1 Replies View RelatedThe update is called:
nvidia - Graphics adapter WDDM1.1, Graphics Adapter WDDM1.2, Other hardware - NVIDIA GeForce GT 425M.
After installing it, whenever my laptop tries to use the Nvidia card, I get a blue screen and the system restarts. I looked in installed updates to uninstall it, and it is not there. I did a system restore to four days before I installed it, and I still get the same effect. Lastly, I installed some older nvidia drivers that used to work using the clean install option, and I still have this problem.
A while back, after successfully downloading and installing some updates in the Windows Update, it prompted me to restart the computer to finish the update installation process. However, I continued to use the computer for quite some time before restarting it, and then when it tried to configure the updates on the start-up screen, it showed that it was not successful in doing so. In the past, I noticed that this would typically happen when I did not restart the computer immediately (or within a short time) after the updates finished and I got the prompt to restart. I would have to go to Windows Update and do it over again, and then upon immediate restart, it would always work properly. But this time, it did not, and I keep getting the 8000FFFF error message instead.
Also, now, every time I start the computer, it shows that it's "Preparing to configure Windows... Do not shut off computer" (presumably the updates that never got completely and correctly configured) in the start-up screen... gets to 35%..fails... shuts down (screen goes black)... restarts again... tries to configure again, fails again, shuts down and restarts again... tries to configure again, fails again, and finally it apparently gives up and says "reverting changes" and finally goes to the desktop.I've looked at the answers in several threads at the answers.microsoft.com forum that were started by people with similar problems, and also tried several of the Microsoft "FixIt" files on the Microsoft site, but none of them worked. I'm using Windows 7 Home Premium.
How to View Windows Update History Details in Windows 7 ?
View 0 Replies View RelatedHow to Uninstall a Windows Update in Windows 7 ?
View 0 Replies View RelatedMy windows update does not like to load! It takes a very long time and sometimes causes explorer to crash! When I checked, I had 92 updates to install. When I click download and install, it would freeze and stay there for a long time. I tried to use the Fix it application, however that gets stuck on "Checking Online for Updates" as well! What should I do? I also tried to update in safe mode, but it wouldn't let me.
View 4 Replies View RelatedIs this file safe to have operating on my computer???
View 2 Replies View RelatedI use iTunes because I have an ipod touch, iTunes wants me to update it before i will sync my ipod touch. It won't update it tells me to download only the update threw the software, I've done a google search and no one that posted a fix had one that worked, i've have this issue before and i tried to uninstall and reinstall itune and nothing worked.
View 5 Replies View RelatedI have an HP Dx7500 that run perfectly.Before making any change i made a checkpoint for future restore. Than i update my AHCI driver (Instead regular IDE) to "Intel ICH/10R SATA AHCI controller" and windows update can't run, no error.. just clicking and nothing move.I fix it for now with system restore.. but i want my hardware to be most updated.
View 1 Replies View RelatedPreviously i used Auslogic Boostspeed to optimize my computer. Instead it backfired and deleted my System 32. After i reinstalled my Windows normally and got my programs fixed i can't update through Windows Update. Nor can i reinstall or unistall Microsoft Word 2010. It comes up with the error code "80070643".
View 6 Replies View RelatedAs you can see in this picture, i can't successfully install certain KB security updates. I downloaded the "Hotfix for Windows" as you can see
View 9 Replies View RelatedOK, first I have to say I am a complete piker with this stuff. If I have to do anything that requires changing the BIOS or registry or anything like that, I am gonna have to pay someone to fix this.OK, here is my problem. Windows update fails with a code 8007370B. I have Windows 7 Pro, a Dell XPS 9100 with 16GB RAM, which I added, as well as a Asus ENGTX460 Top video card. The system has worked great with this configuration for well over a year. I use MSE as security, and Zone Alarm for the firewall.I have been getting this code since October. I tried doing the windows troubleshoot and fix links, I tried Fixit, I tried System Restore, nothing worksThe system also says under last time updated "Never" and it displays no record
View 9 Replies View RelatedI did an update of Windows last week, which included two critical fixes (I think both were related to .NET) and two "optional" security updates. I updated, rebooted, and now Windows Update no longer works: the icon is missing from the menu item, and when I click it nothing happens. The Windows Update service is running; tried restarting that as well. Tried a .NET cleanup utility, but all that seemed to do was remove or break one of the .NET version installations (a game that uses .NET complained after running the utility, and stopped complaining after I manually re-installed .NET 3.5 and updates).
View 14 Replies View RelatedMy Samsung series 3 laptop has been sending out popup messages telling me I need a bios update, I go to the Samsung software update site and this bios update has been failing, I have made several calls and chats to techs at Samsung who tell me to do what I have already done, they tell to ask for tier 2 tech, who can go in my computer and fix it , When I finally got a tier 2 tech, they told me the same thing, I told him what I had been told about him and what he could do, He said, is it working , I said yes, but settings on computer change on their own,like wifi turns itself on and that concerns me. Anyway, He said that it didn't need a bios update,even the Samsung website said this computer needed a bios update. I posted this on hardware,firmware concerns, and they told me to post here, I was going to go to a site ,that had a download that checked drivers,
View 3 Replies View RelatedWin 7 x64 update KB2656351 seems to download and install smoothly, but within a few minutes it wants to update again and again. It doesn't matter how many times I update. It doesn't ask for rebooting, but if I do it doesn't make a difference either.
View 9 Replies View RelatedI recently went from Windows XP to Windows 7. I followed all instructions and completed the change. Now my display is so huge it does not fit on the screen. From readiing post on here, it seems that this is aproblem with the graphics driver? I have followed all suggestions and cannot change anything by right clicking on the desktop. The setting is on 100% and I have 800x600 256 color which will not allow me to change it. I have a Gateway E52 300X, serial # 0031758993 desktop with a Brookdale GGreaphics Chip Acceleration VGA BIO, 8 Bit, 0.0, 832 KB, I have tried to update via intel website but cannot even get the site to check my computer for updates because the internet explorere stops working when I try. And, I have tried many times, I have an Itel Celeran CPU 2.40 GHZ with 2 GB of ram. I would like to increase the speed on this computer but don't even know what to do or if this is all related. Any help would be greatly appreciated!! Oh, also, my on screen text as I am typing now is purple and green???
View 8 Replies View RelatedI am trying to run the SP1 update (x64) for Windows 7 and after it finishes with 'preparing to install' an error message pops up saying, 'laptop is running on battery power please plug in to the mains to continue install.' error code 800F0829.The thing is I have connected to the mains and it still comes up saying this error and won't retry the installation. I have tried charging the battery to full and running the update, plugging the mains in when asked/not asked etc but nothing seems to work?
View 4 Replies View RelatedTwo days ago WUS on it's own updated windows update agent 7.6.7600.256, as of then Windows 7 will no longer update, 80244004 is the error message. There is not much data on the net pertaining how to fix, My question has anyone here experienced the same problem? How did you fix?
View 9 Replies View RelatedThe wife's laptop hardly used, and been setting and has been setting for about 7 months. She finally decided she wants to learn/use it. I have been trying to get everything updated, and a few programs automatically popped up for updates and were successfully. However I can't get the Windows updates to run it says, Windows update can't check for updates because the service in not running. Try rebooting. That didn't work.I ran MrFixitit, another fix from microsoft and nada. I checked the services and the update one is running and on auto. I tried shutting it off and back on, set it to run automatically and auto with delay. Rebooting between any change. The computer has only been on line 7 months ago to update the programs, including win7 and has no virus's.
View 3 Replies View RelatedBut i am just wondering if uac popping up during windows update can affect anything? i decided to install some programs during the update and uac popped up balnking out the screen and making it appear that it froze the updates. Then some of the updates failed. So does windows update affect aything? if so ill install again.
View 2 Replies View Relatedive been having this problem since i tried to install the newest itunes to put music on my ipod, now i cant access updates, when i click to look for updates it stays like that all the time LOOKING FOR UPDATES... but nothing appears i tried everything i cant even run sfc. i dont want to reformat here are the errors, sry its in french this is for itunes error and this the WU error
View 9 Replies View Related
