Finished Building Latest Computer / It Will Not Boot
Apr 15, 2012
I wanted a computer that will last a while and be strong enough for some games I am not a big gamer, But I do have a few I play. [code] I have built many many computers in the past.I have only had one that gave me trouble as there was a pinning that was hidden. Since then I have built at least 8 with out trouble.So I went about collecting parts and building.I go to turn it on and only a flash of light at all of the lights. Then shuts down and nothing.I wait a few minutes and try again.i get the same result a flash of the fan lights then nothing so I am at a loss as to what is wrong.I changed cases, and I chaanged power supplies at different intervals. Nothing. i changed the case to a different one. and still no change.I have not changed the RAM. Nor the CPU. But I did try a different Mother board with the same cpu and ram. Still not change.I am to presume that I have a bad cpu and or ram, or these items do not like each other.
Yesterday I tried To install the last RC before RTM v7600.16385 64bit on my dv9000
I am currently running RC7100 no problems yet... since May, So i started installing this newest build on my spare HDD (drive F) I was looking to try out the latest as a dual boot situation (at least that was my original plan) So I set Off- and it looked suspiciously like it was erasing my drive C plus it hung up on install(or I got Paranoid and canceled the install) either way after the cancellation it rolled back to previous state(no files were harmed...)but now on my boot screen it offers me windows set-up and below that in the list windows 7 Ultimate(recovered) it never did that before when I select Set Up it goes into the 7 set up screen (light blue with plants) and restarts continually never finishes ... that is the first thing, Secondly when I select windows 7 ult.
(recovered) it boots normal! How do i remove the option for "Set Up" under the boot screen and also change the windows 7 Recovered back to normal, I tried restoring to a previous State using System restore and selected a point 3 days prior to yesterday but on start up it does the same thing The set up is first on the boot list How can I get my system back to normal I cant do a fresh install I have to much valuable stuff that i cant risk losing I tried restore and it apparently didnt help, what else can I do...Will a repair install help and if so Will it erase any programs and personal Data such as Itunes Libraries and photos and misc.. programs and will it dump the other set up on the boot screen?
I reinstalled Windows 7 on my laptop yesterday (a recovery reinstall, not a clean one). The install worked fine, I'm able to boot up and use all my programs again no prob, but when I attempt to go into Safe Mode, it thinks Windows hasn't completed the install. While the message "Setup is starting services" is on the screen, a popup appears saying "Windows cannot complete installation in Safe Mode. To continue installing Windows, restart the computer"I'm thinking there's got to be a simple registry key fix for this but am having a bear of a time finding anything applicable online.I don't have an urgent need to use Safe Mode, btw, just doesn't seem right not having it available should I need to
Right now I am building a new computer and by new I mean everything is new.The motherboard is an Intel DH55TC The processor is an Intel Core i3-540.Need advice for doing this thing.
the latest rtm extract did not come as an iso. Now there is a boot folder, but I can't create the correct boot disc at all.....
Everytime I burn the disc it just doesn't want to boot to it, it just bypasses it. So I can't get a clean install going.... I am running nero 9, any help would be greatly appreciated. I am not that skilled at making boot discs, detailed instructions would be great.
This combination of drivers works fine in windows vista 32 bit.. boots up fine and everything. Today I finally got my SSDD for my OS and a copy of Windows 7 64 bit. I installed it fine without error. Then installed my chipset drivers that I downloaded off of Nvidia's website (64 bit, worked fine, rebooted), installed my nvidia display drivers, rebooted.. now whenever I start windows up. I get the flowery blue background windows logo. It just hangs there and never boots. However it will boot fine into safe mode and after I uninstall the display drivers... though my gaming computer is going to be pretty useless if I can't game with it!
Relevant Info Windows 7 64bit Asus Striker II Formula (with 15.58 64 bit drivers installed) 2x SLI EVGA Geforce 560 TI 448 Special Edition (with64 bit 310.90 Drivers Installed)
I am going to try installing the motherboard chipset drivers from Asus's website. I believe the version number is 15.43, then try reinstalling the video drivers. However I don't think this is going to make much a difference.
Right, i'll try to explain it not to detailed; -Was multitasking between online videos and facebook, when suddenly one of those 'Do you trust 'such and such'' windows came up (with the dimed background). -I cannot remember what it said but it wouldnt let me press 'No'. -So I had to trust it (but I would have pressed 'Yes' anyway). -So when it went away, displayed on my screen was a new window, and again I didn't really look at it, but I defintely remember that it was an error window. Again I pressed yes, and this was because I didn't understand a word of it.This is where my problem comes in; -After pressing 'yes' the computer restarts and comes up with a 'System Repair' screen, tells me that its looking for the problem. -When finished it says 'Unable to repair' or something along those lines, and then followed by 'remove all external hardware (mp3s, controllers etc) and try again' -I do this, doesnt work same screen. -And now i'm stuck. EDIT: Its the 'Startup Repair' option/window in the 'System Recovery Options' window.
Few week aago, I posted a thread about my Windows update never finish and I need to power off my PC to be able to regain control.One of you, did suggested to use a Windows update utility and it worked for that time. Now, it keep coming back again and again.How can I determine witch Windows update keep causing problem. How can I avoid that.Anytime I need to turn off my PC, I need to remove the automatic update.
I recently got an Asus G74 (great for gaming, by the way) after my old laptop died.the only thing I don't like is how my fingerprints show up on the matte (ruberized plastic) finish on some of the computer. how to legitamately clean it? And is it safe to lightly wipe it down with water? Or how about windex?
Each time I uninstall a program, after it completes and I try to uninstall another, I get the following message: "Please Wait Until The Current Program is Finished Uninstalling or Being Changed". Why?
I'm planning on buying a new PC for media purposes in the next week or so and this is what I've got so far. [code] Anyway what do you guys think, am open to change for better performance however don't really want to spend that much. The only thing that I really want in this PC is a blu-ray drive.
Building the OS from scratch seem to me to be the best way to go when building a new computer. As time goes on after a year two or three the OS seem to get sick such as my auto run don't work no more and after Microsoft work on it for 3 hours it really don't run no more. Bugs, jitters, shakes and just old age. So after I build the computer I think I'm just going to build the OS from scratch. I've did it both ways, from scratch and just move it to the new computer and after I just reload the OS and rebuild it I feel so much better not to mention the computer runs like a high school student instead of someone like me that just took sum Vitamins.
I have an AMD 790gx chip set with ati radeon hd 3300 graphics. When playing Stronghold Crusader the only two resolutions are 1024x768 and 800x600. With both of these selected the game is being stretched on the bottom and top and making it where I can't get to the building icons. The resolution on my computer is set to 1366X768. When dropping the screen resolution on my pc it either doesn't help or the Windows doesn't fit on the screen properly anymore. Anyone know how I can just turn off the game scaling either in windows or the Catalyst control panel. On my laptop the game just has black bars on both sides instead of trying to stretch the game. How would I go about turn this on my desktop.
I'm looking to buy a laptop and my budget is 1700 USD / 10.000 DKK I will primarely use it for gaming but as a work pc too?What parts should I order and is there perhaps some sick new CPUs or graphic cards on the market that could make it really fast.
I am building a Media Center PC. I have two questions relating to Windows Media Center:
1) I can watch TV via TV card, but can I watch TV from another source such as HDMI or AV from my satalite reciever or PS3?
2) Can WMC work with a dual monitor graphics card? I would like to transmit the media center screen via AV to monitors & speakers, while being able to use the PC for other use via VGA connection.
I'm building a Windows 7 image from scratch. Does anyone know how I can get the OEM info to display the make, model, and serial number of the PC in the System Properties automatically no matter which system I send this image to?I know you can set them manually in the registry, but I want to know if it's possible to pull this from the PC it's installed on.
building a computer tower all out of plexiglass, everything would be made with 3/4' plexiglass. I would make a back panel out of 1/2' sheet of metal where the mother board would mount onto it's a "Asus P8P67 WS Revolution: Intel P67 Express, Nvidia NF200 PCIe Bridge, LGA 1155". The power supply would be an "OCZ-Z1000M: 1000W Modular, ATX12V v2.2, EPS12V, 80 PLUS Gold". Would be installing a H70 CPU cooler onto a 2600k cpu. Will also be running about six fans about 120mm in size.
I'm planning on building a desktop pc with windows 7 64-bit. My question is should every programs/games that I install/buy has to have anything that says its 64-bit compatible?
Just got in some new Dell Latitude ST tablets at my work. We used WDS for our imaging process. Problem is these new Dell ST's do not have support PXE on the nic's.
How can I create a wim image of the tablet that I have built? I have a bootable USB key all built and I can switch out the wim, I'm just not sure how to capture a wim of the tablet without the WDS.
I need help choosing parts for building a Desktop PC! I will use it for gaming, programming, watching HD movies, and I want to watch 3D (if my budget can). My budget is $1,500.I want my processor Intel, and i7 if it is good!These are what I choose for RAM and Storage: [code] I want to add WiFi adapter, and I want the Mobo to have so much PCI slots.I don't mind if the Mobo is so big, because the case I will choose is Full Tower!
I'm planning on building a new PC myself for the first time and I'm not sure how to go about getting the proper disks to install Windows with. I have a genuine product key for a copy of Windows 7 Professional 64bit which I downloaded from Microsoft directly. If I recall, I had to purchase a clean install version because I could not upgrade to 7 Professional from Vista Home Premium.Is there a way I can use my product key to obtain the disks I need to install Windows on a new system, or will I have to purchase another copy entirely?
since my computer just blue screened again I'm posting this on my phone. As the title says I'm getting hardware errors after litterally finishing the build and installing windows.
building a Access 2010 database application and I've been told that most of the functions I want it to complete have to be done in VBA. Our company doesn't want to hire somebody to complete this 1 application so I'm in charge of finding any websites or other companys that can do it for us. I've found a couple other sites that I think can do this, for example [URL], but I want to find a few more so I can be sure we are getting the best price.
I only have a dialup connection at my place, to which i connect through my windows 7 laptop. Now I have several devices at home which i need to connect to internet (like: iPhone, Wii, another laptop and desktop).
I have the usual 100mb/S wireless ethernet adapter in my laptop. So what I had in mind is if it is possible to create a wifi connection from my ethernet, and bridge (or sometihng like that) my ethernet to my dialup, so I can see my dialup connection as a wifi network in my iphone e.g.
The problem is that I have no idea how to do that, or if that is possible in Windows XP. I would really appreciate any help around this.
Currently I'm building a server for a client who wants to run several copies of Diablo 3 on multiple Virtual Machines.Further, they also need the ability to use a hardware unity function.
I am running an Advent desktop PC and its stats are as follows; Intel Core i5-2310 CPU @ 2.90GHz 8GB RAM Win 7 64 bit.The problem I am having is when ever i boot up the computer it shows the Advent logo-screen where I can access the boot menu etc but then it goes to a black screen with a cursor/underscore flashing in the top left... This screen stays for quite a while and I am not sure if it stops because of a key I have pressed or just because it has run its course but after it disappears the computer goes back to the logo-screen for a moment and proceeds to boot up as normal except slightly slower than usual.It is a relatively new computer and it has no problems running at all once the boot up is complete it is fast and as friendly as ever.
I installed windows 7 x64 and I don't know whether I have the latest drivers. For some it is obvious eg gfx drivers but for the chipsets ( I have intel P35 desktop) it is more difficult.
I installed the "Intel® Chipset Identification Utility" for my chipset but a lot of my intel drivers from I look at the device manager have driver dates from 2006 e.g.
Intel P35 Express Chipset Processor, all the Intel ICH9 drivers...
Would this be considered up-to-date? I'm thinking these are just simple drivers etc and they wouldnt be updated too often.
I also see in Device Manager quite a few generic names like "Standard Dual Channel PCI IDE Controller" is this meant to be the case or should i get more specialised drivers?
I have just finished installing my copy of Windows 7 Ultimate, So I thought I would start updating my Drivers.
I have the EVGA nVidia GeForce 8800 GTX Graphics Card.
I went onto nVidia's website, and downloaded the driver for the 8 Series, but when I try installing the drivers, I get an error pop-up saying that the driver is suited for Windows Vista and Windows 7 only !
It is strange because I am on Windows 7, yet it won't install.
