How To Get XP To Boot As Default On A Dual Boot Setup ?

Sep 28, 2009

I have xp 32bit and 7 64bit on a dualboot and 7 is the default, however I want to change that.

View 7 Replies


ADVERTISEMENT

Need A Dual Boot Setup

Jan 24, 2011

I need a dual boot setup. I have a new 320 GB SATA hard drive and I need to replace an old 80 GB hard drive. I have a Windows XP Home disc that came with the machine and the Windows 7 Professional Upgrade disc. What do I need to do in order to have a painless dual boot setup. I want to be able to choose before the system starts booting.

View 6 Replies View Related

Dual Boot With XP As Default

Jan 11, 2009

i have XP installed in my 320GB Hard disk having 2 partitionsPart XP used for Data unused part i installed windows7 on 3 unused part. Now i get the dual boot but the

default is set to window 7 so it will boot this window in say 20 sec, i would like to set the default to the Earlier version which is XP,

i tried to open the boot.ini in XP (part1) this is what is there

;Warning: Boot.ini is used on Windows XP and earlier operating systems.

;Warning: Use BCDEDIT.exe to modify Windows Vista boot options.

[boot loader]

timeout=30

default=multi(0)disk(0)rdisk(0)partition(1)WINDOWS

[operating systems]

multi(0)disk(0)rdisk(0)partition(1)WINDOWS="Microsoft Windows XP Professional" /NOEXECUTE=OPTIN /FASTDETECT /PAE

i opened cmd typed BCDEdit and it give me access denied.

Can some one please let me know how to set the default to XP.

View 9 Replies View Related

Setup A Dual Boot Never Finished

Sep 18, 2009

Yesterday I tried To install the last RC before RTM v7600.16385 64bit on my dv9000

I am currently running RC7100 no problems yet... since May, So i started installing this newest build on my spare HDD (drive F) I was looking to try out the latest as a dual boot situation (at least that was my original plan) So I set Off- and it looked suspiciously like it was erasing my drive C plus it hung up on install(or I got Paranoid and canceled the install) either way after the cancellation it rolled back to previous state(no files were harmed...)but now on my boot screen it offers me windows set-up and below that in the list windows 7 Ultimate(recovered) it never did that before when I select Set Up it goes into the 7 set up screen (light blue with plants) and restarts continually never finishes ... that is the first thing, Secondly when I select windows 7 ult.

(recovered) it boots normal! How do i remove the option for "Set Up" under the boot screen and also change the windows 7 Recovered back to normal, I tried restoring to a previous State using System restore and selected a point 3 days prior to yesterday but on start up it does the same thing The set up is first on the boot list How can I get my system back to normal I cant do a fresh install I have to much valuable stuff that i cant risk losing I tried restore and it apparently didnt help, what else can I do...Will a repair install help and if so Will it erase any programs and personal Data such as Itunes Libraries and photos and misc.. programs and will it dump the other set up on the boot screen?

View 9 Replies View Related

Dual Boot Setup - Possible To Run XP With Windows 7 64bit?

Feb 21, 2011

I have 3 hard drives in my computer. One for Windows XP Professional, one for Windows 7 Ultimate and one just for storage. My question is can I change my Windows 7 installation to 64 bit and still be able to run XP?

View 4 Replies View Related

Bootmgr Missing When Setup Dual Boot

Aug 24, 2009

I spent the day trying to fix my operating systems boot.

Earlier in the day i tried to install a MacOSX (I've formated the second hard-drive asoff now) on a seperate hard-drive (CRIVE AKA Windows 7 drive was unplugged). After i was done i decided to plug in the c drive because i wanted to get on windows to setup dualboot. But for some reason it said bootmgr missing...

I've tried bootrec /fixboot and the other ones.

I just checked my drive somehow Cdrive turned in to D drive would that be the problem? Could somebody please show me a way to change from D drive to C drive?

If this would help nail the problem. Also tried to boot the hard-drive from my laptop via esata. I get a different problem i get a blue screen during the Windows seven loading screen. Heres the stop code: 0x0000007b.

View 9 Replies View Related

New System Setup - Dual Boot OS And Application SSD

Jan 15, 2013

I am at a bit of a loss here in regards to partitions, as I've never really done it, I want to configure a new system setup under the following circumstances:

SSD(1): (dual-boot OS drive)
+ Partition 1: Windows 7
+ Partition 2: Windows Server 2012

SSD(2): (program / file drive)
+ Partition 1: one large single partition for application / program storage; e.g., Visual Studio 2012 and SharePoint Server 2013.

I need to have an instance of Windows Server to use SharePoint Server. At times I will want to run the server set-up to facilitate TFS and SharePoint with a very small team of developers, school related for example. And at other times I would like to boot into Windows 7 Ultimate so I can have a normal browsing experience and play games, etc. But of course I could also develop with VS11.X in Win 7 environment if needed.

My question, is what I'm proposing possible? I want to use Windows 7 normally most the times, but at others I will require Server 2012 to use SharePoint. Can I share the same program resources on the second SSD regardless what OS I boot into? What issues may rise if I tried running SharePoint (or just having SharePoint) while booted into Windows 7? Will I have to create two partitions on the 2nd SSD, a copy of apps for each OS due to system registry constraints.

View 1 Replies View Related

Dual Boot Default Operating System

May 25, 2011

I have my hard drive partitioned to boot Windows 7 and Kubuntu 10.04. The default operating system is set to Kubuntu but I would like to change this to Windows 7.

View 1 Replies View Related

Manually Change Default Os In Xp And Windows 7 Dual-boot?

Sep 20, 2009

I had Windows XP Pro running on my PC and I've installed Windows 7 using dual-boot.I want to create a command line BAT file that will allow me to change the default OS system before I boot. For example If I'm working on XP and wants 7 to start-up automatically then I'll execute the batch file and it will manipulate the boot info so that i won't have to select it, and if i work in Windos 7 and want to automatically restart to xp i will run another BAT file.I was able to do it in windows 7 using the command line bcdedit.exe application tha can control any aspect of the boot settings, but i couldn't find anyway to control the boot settings from within XP because the boot "belongs" to windows 7 and XP doesn't even "know it" or able to access it.

However I have a third-party application able to do that called VISTABOOTPRO, so i can assume it is indeed possible, but i want to create a simple one-click procedure to do it for me.

View 7 Replies View Related

Dual Boot Setup - Unable To Identify Network Error

Mar 3, 2012

Just today I decided to download the Windows 8 consumer preview and setup my PC to dual boot with it.I am running Windows 7 home premium 64bit and the 64 bit windows 8 on my other partition. After setting up a separate partition on my hard drive and loading windows8 to this partition, I was all up and running. I had no problems setting up or running windows 8, the problem came when I booted back to windows 7 for the first time. When I booted into windows 7, I was getting the "unable to identify network" error, and no network connectivity.

First thing I tried was simply disable/enabling my network adapter thinking it was just some hiccup. No luck there. Next I pulled the power from my router, and let it completely reboot. Still no luck. I then shut down my pc and booted back into windows 8 and sure enough I am able to get internet connectivity when I am running windows 8. This got me to thinking that when I loaded windows 8 there may be some new drivers installed for my network card that are somehow causing issues when I load into windows 7 again. Not sure how this is possible.

I was under the understanding that when I loaded Win8 to the separate partition that it would keep all it's drivers and settings there and not effect anything when I was loaded back on windows 7 (This logic could be completely wrong, I don't know). So I rebooted and loaded back into windows 7, went into device manager and uninstalled both network adapters and drivers, and rebooted into windows 7 again so it could re-discover and setup the network cards with default windows 7 drivers. This did not work either and I am still getting the same error.

View 5 Replies View Related

SATA Drivers - Load In Windows XP Setup On Dual Boot

Feb 27, 2010

How to Load SATA Drivers in Windows XP Setup on Dual Boot PC ?

View 0 Replies View Related

Partition The New 1TB Drive For Dual Boot Setup With Windows 7 Home X64 / WinXP Pro (32-bit)

Nov 11, 2010

The motherboard died on my 3-year-old Compaq, so I just ordered a new computer that comes preloaded with Win7Home Prem x64. It was from Dell Outlet so I couldn't choose the OS. I've been using MCE (XP pro 32-bit) for several years and love it.I'm worried about program and hardware compatibility with Windows 7 x64. I don't use very graphics-heavy apps like CADD, Photoshop, etc. I only plan to do a little video editing with my .avi clips. I also have an older version of Replay AV that I use to record live streaming radio. I don't want to buy a new scanner (Canoscan LiDE 20 - no x64 drivers!) so here are my options:

A-Partition the new 1TB drive for dual boot setup with Windows 7 Home x64 / WinXP Pro (32-bit). I would buy the XP Pro OEM Branded DVD.

B-Install my old 200GB SATA Seagate Barracuda 7200 as a second drive and run XP programs and scanner from that.

C-Buy Win 7 Pro 32-bit OEM Branded discs, remove Windows 7 home x64, and do a complete new install with the new discs, and hope that my XP programs work with XP Mode. (new i5 processor supports virtualization)

View 9 Replies View Related

Dual Boot Windows 7 64 And Xp 32 Dual Boot Same Drive?

Sep 12, 2011

i have a new work laptop with xp sp3 on it. I want to install w7 64 bit as a dual boot, but only have 1 physical drive. i cannot remove my current installation as it is pre-build from work, but can partition the drive etc. However on trying to install w7 64 bit I get a message saying cannot install windows 7 on efi drive with mbr, not gpt. Can I do what I want without screwing up my xp installation?

View 5 Replies View Related

Dual Boot Windows 7 And Vista Boot Error Winload.exe

Oct 14, 2009

I installed Windows 7 on a partitioned harddrive with vista on the other half. After the installation i have my boot menu with:Windows 7, Windows Vista, Windows vista still works but when i try and load windows 7 i get a boot error message

View 9 Replies View Related

Boot Menu Doesn't Show Up - XP And Win7 Dual Boot

Oct 30, 2009

I have XP (x86) installed on one partition.

Last night I installed Windows 7 (x64) on a separate partition.

Anytime I had tried this in the past, using Vista, it always detected the Windows XP partition, and gave me a boot menu with "Earlier Version of Windows" option to boot to.

This is not so with Windows 7.

How can I get the boot menu to show both options, to boot to XP or to Windows 7?

View 9 Replies View Related

Restore Points Missing From Windows 7 After Boot In Xp (dual Boot)

Aug 8, 2012

I have dual boot with Xp and windows 7.when i log into my Xp all the restore points being deleted from windows 7.when i check the disk management information in 7 it shows windows 7 create a logical drive with my Xp primary drive.even i am hide the drive from both windows means Xp drive from windows 7 and vice verse.So i like to unmount or remove the drive partition of windows 7 from Xp and Xp primary from windows 7.So that they dont affect each others system files with being deleted the partitions.

View 1 Replies View Related

Cannot Boot Windows 7 After Installing Opensuse 12.1 On Dual Boot

Apr 6, 2012

I installed opensuse 12.1 on dual boot along with my other windows 7 installation. Installation of opensuse is successful and i can use it. But when I tried to use windows 7 on grub, it says bootmgr is missing. I've already encountered this problem a long time ago so i tried to use bootrec /fixmbr, bootrec /rebuildbcd and bootrec /fixboot in the recovery console in the windows 7 DVD. Rebuildbcd and fixboot did not work and it said something like it cannot find my windows installation. I also tried bootrec /scanos, it returned a windows installation on D:\Windows but my windows is in drive C. I think this has something to do with me messing up the active partition in disk management a month ago but i already fixed it by setting the active partition to the system reserved partition. Only fixmbr is successful, but now i can't boot on any OS because it says: Missing operating system.I also tried bcdboot C:\Windows but it failed with a message that goes like: Failure when attempting to copy boot information..

View 2 Replies View Related

Boot Up Problem In Dual Boot (win7 And OSx86)

Sep 24, 2009

I was having win 7 RTM and i tried to installl OSx86 in second hard disk

after few failure i successfully installed OSx86 in my secondary had disk now the problem is that i cant boot win 7

i changed boot order i tried windows 7 disk repair

but both failed

im getting some Boot mldr missing...

Actually even OSx86 is not booting i get OSx86 boot screen with two hard disk to select if i select windows disk it still says the same Boot mldr missing.

View 3 Replies View Related

Windows 7 Won't Boot After Installing Ubuntu Dual Boot?

Dec 3, 2010

I can't get Win 7 to boot after setting up dual boot (Ubuntu 10.10) on my GF's laptop. I'll describe the problem and everything that has been tried so far. REALLY hoping somebody has an idea, I'm getting desperate.I installed Ubuntu last night via the Live CD. Used the Live version to install alongside Windows and partition the drive, install Grub, etc. At reboot, after POST it would just go to a black screen with a flashing cursor. I could only run off the live CD. A forum member determined the Grub was trying to load from the wrong partition. We changed that and voila! Grub now loads properly. I can boot into Ubunto via Grub with zero problems. HOWEVER: when I try to boot into Win 7 from Grub, it just locks at the same flashing cursor of death screen. The 7 partition is till intact, I can see and access all the files on the 7 partition from within Ubuntu, however 7 will not boot. I have tried downloading and burning the Win 7 repair disk and doing all of the following,Running the automatic Start Up Repair - several times. All it does is remove Grub, but booting still goes to the flashing cursor and I have to reinstall Grub again to be able to do anything after POST.I have used the command prompt to run "bootsect /nt60 SYS /mbr". Has the same effect as above.I have used all the bootsec.exe /fixmbr, /fixboot, and /rebuildBCD commands. Again, all have the same effect and I have to reinstall Grub to get anywhere.I don't have an installation disk to try and just do a repair install because Asus apparently doesn't feel that I would need one of these. All I have is the recovery disks from the Asus AIRecovery application that want to just re-format the entire drive and start over. This isn't an option. It's my GF's laptop (mine gave up the ghost last week) and we both have WAY too much highly important data on here. Not to mention she would castrate me . Now from all my research the only other thing I've come across that sounds possible is that the boot flag needs to be set to a different partition. Somebody had a somewhat similar problem and it turned out the way Dell set up the system the boot flag had to be moved to a recovery partition and it worked fine. I'm wondering if Asus has something similar going on, but I can't figure out how to move the boot flag. I'm going on 12 straight hours of working on this now

View 9 Replies View Related

Convert Dual Boot To Single Boot, 2 HDds

Aug 27, 2009

I setup an XP/Windows 7 dual boot on two drives. Currently C: Windows 7, D:XP

Love Windows 7 and now I'm ready to convert to single boot Windows 7.

I'm not real savy re. bcdedit so will need very detailed instructions

I did find the command line in Windows 7 by going through accessories but I'm scared to go further without help.

Eventually I want to clean up the D:xp and use it for storage etc.

I'm guessing this procedure may have already be written up but I can't seem to find it.

View 9 Replies View Related

Dual Boot - Change OS Name In Windows Boot Manager

Mar 11, 2009

How to Change the OS Name in Windows Boot Manager ?

View 0 Replies View Related

Can't Boot Into Original OS After Dual Boot Configuration

Feb 23, 2012

I recently added a hard drive to my computer (SSD), and installed Windows 7 x64 onto it. The result being a dual boot system, which by default boots to the SSD, and optionally (by Windows Boot Menu), can be booted to the original drive (standard mechanical drive).

Initial setup went fine, however I decided to customize the Windows Boot Menu, so that logical names could be associated with each operating system instance. To do this I used EasyBCD and I altered the names in the Windows Boot Menu from: Quote:

Windows 7
Windows 7

to... Quote:

Windows 7 - SSD
Windows 7 - Standard Drive

Shortly after the modification I noticed that I was no longer able to boot into the original OS. Instead I was being presented with a "Repair Windows" option. Figuring that my EasyBCD "tampering" may have had something to do with the issue I decided to change the names back to "Windows 7" in the Windows Boot Menu. However doing so had no positive impact on boot up of the original OS.

After booting again into the original OS I accepted the "Repair Windows" option, and then left the computer over night to do it's "thing". After completion of the "Repair" the situation has deteriorated -

* Windows doesn't load (the same as before)

* Windows doesn't present a "Repair Windows" option (it did before)

* The computer reboots a short period after the "Starting Windows" screen is presented

As a side note the drive is in good health, and all data on it can be read from within Windows 7 when I boot to the SSD OS.

View 2 Replies View Related

Change From Dual Boot To Windows Boot?

Aug 6, 2012

I have installed a year before UBUNTU on my pc with dual boot (i.e. use either window 7 or ubuntu).the NTFS partition that contains the UBUNTU was corrupted and i wanted to take the dual boot from my PC. I used the instructions from the web site: http://www.makeuseof.com/tag/how-to-...t-environment/but the disk management tool would not let me delete the NTFS partition.Could any one help me delete the NTFS partition and use just windows 7 as the only boot. step by step help would be great.

View 8 Replies View Related

Windows 7 And XP Dual Boot - Invalid Boot.ini?

Feb 17, 2009

I got windows 7 running fine for a while now and ever since my XP did not boot anymore.I was not worried to much about it since i did not need it at the time.But now i really REALY need it,See i got all my Cubase projects in there and my cubase plug-ins al setup in XP and i need to get to the projects?At first it did not do anything and using easyBCD did not help either.I cpoied ntldr and detect to the root of C: wich contains my XP and now it shows the bootscreen but hangs on a black screen.The thing is right before the bootscreen shows i see the text" invalid boot.ini" flashing by very quick.I am able to enter that winXP install in safe mode and i tried safe/vga mode as well wich works but thats all.

View 9 Replies View Related

MBR Error 1 On Boot - Windows 7 (32-bit)/XP SP3 Dual Boot

Nov 9, 2012

I have a laptop I bought a year ago on which a created a dual boot Win 7 (32bit)/Win XP SP3 install, each on a separate partition. It was my first Win 7/XP dual boot install, and my first personal system that I allowed to have a Win 7 install on it at all, so although I have plenty of experience working on pretty much every previous version of Windows, I have very little experience with Win 7 and dual boot configs.

Today about 2 hours ago my audio spontaneously stopped worked for no good reason, so after shutting down each program to see if that cured it (which it didn't), I restarted the system. Out of the blue, for the first time I've ever experienced it, I received the msg "MBR Error 1" - Press any key to boot from floppy. I don't have a floppy of course on my laptop, and if I press any key I simply get the same msg. I turned the system off for a few minutes to make sure it was a good cold boot, but every time I still get the same msg. I tried switching the BIOS setting from IDE to AHCI (IDE is required for XP to boot, AHCI required for Win 7), but I still get the same error msg before I'm even prompted with the OS boot selection, so it made no difference of course.

I looked up this issue and found various suggestions, but none of the ones I found took into consideration a dual boot config., they were all Win 7 specific solutions. I don't what to try and repair the MBR only to have it screw up my dual boot config and be unable to access XP, which is what I use almost exclusively, nor do i want to lose access to Win 7 if at all possible.

I had a backup HD of my complete system that I saved several months ago when I upgraded my HD, and I periodically refresh the most important files on it, so I'm currently running on the laptop in question using my old HD, and it's working just fine. Worst case I can just clone my old HD to my newer HD that's screwed up, but I'll still lose a lot of changes I've made to the OS since I upgraded the HD and have to reinstall and config a number of programs, so that's my last option. I'll also have to back up about 200GB of data from the newer HD which is much larger than my old HD, and then restore it back after the clone, something that will take a lot of time and unncessary effort if I can just fix the MBR.

View 4 Replies View Related

Boot Manager/dual Boot Error

May 5, 2009

I'm having a problem every time I power on the system. I'm dual booting vista ultimate with win 7 build 7100; with vista I have no problem, but with 7 every time I start the system the first boot attempt gives me the error 0xc000000e after the boot manager display: "the boot selection failed because a required device is inaccessible".;after a reset the system boots 7 with no problems. Win 7 is installed in a brand new hd(seagate barracuda 1.5tb) and vista on a second hd.

I've search the web for people with a similar problem with no success. I've tryed already many solutions but the problem persists(latest bios for the motherboard, latest intel sata drivers, etc). I'm hoping that this could be a bug in win 7 instead of a hardware failure for the hd. Again, the strange thing is that this only happen after the power on. After that first error, no matter how many reboots, the system always boot without problems.

View 4 Replies View Related

7 And Xp Dual Boot Problem, No Boot Menu

Aug 8, 2009

i did a terrible mistake. i installed windows 7 first on one drive and then i install windows xp on separate drive. and when i restart there was no boot menu to choose the OS from list only windows xp started straight away. i did not knew about EasyBCD . and i put my windows 7 DVD and run recovery. now i can goto windows 7 but xp is missing again. is there any way i will not install xp from beginning and windows 7 can add boot menu in startup to choose xp or 7.

View 4 Replies View Related

Can't Boot Into Original OS After Dual Boot Configuration

Feb 23, 2012

I recently added a hard drive to my computer (SSD), and installed Windows 7 x64 onto it. The result being a dual boot system, which by default boots to the SSD, and optionally (by Windows Boot Menu), can be booted to the original drive (standard mechanical drive).

Initial setup went fine, however I decided to customize the Windows Boot Menu, so that logical names could be associated with each operating system instance. To do this I used EasyBCD and I altered the names in the Windows Boot Menu from: Quote: Windows 7 Windows 7 to... Quote: Windows 7 - SSD Windows 7 - Standard Drive Shortly after the modification I noticed that I was no longer able to boot into the original OS. Instead I was being presented with a "Repair Windows" option. Figuring that my EasyBCD "tampering" may have had something to do with the issue I decided to change the names back to "Windows 7" in the Windows Boot Menu. However doing so had no positive impact on boot up of the original OS.

After booting again into the original OS I accepted the "Repair Windows" option, and then left the computer over night to do it's "thing". After completion of the "Repair" the situation has deteriorated -

* Windows doesn't load (the same as before)

* Windows doesn't present a "Repair Windows" option (it did before)

* The computer reboots a short period after the "Starting Windows" screen is presented

As a side note the drive is in good health, and all data on it can be read from within Windows 7 when I boot to the SSD OS.

View 6 Replies View Related

Dual Boot XP With W7RC Boot Problem

Nov 15, 2009

I had Win XP and Vista set up as dual boot. I have back up images of both using Norton Ghost. I then upgraded the Vista partition with Windows 7 RC and all was fine for several months. Last week I had issues with the XP installation and the only resolution was to put the xp image back on the xp partition. This action has left me with a boot screen with XP and Vista on it and as expected only XP can be booted.

I put the Windows 7 installation disk back in and it recognised the boot screen error and fixed it; (too good to be true I thought!) When booting, I got the choice of XP or Windows 7, so the Vista option had been replaced ) however, there is an error that cannot be fixed and so the boot fails. The PC does the usual reporting to MS looking for a solution but can't find one.

So, will I have to replace the Windows 7 partition with the Vista image and then reinstall the Windows 7 or can I recover this another way? Also, what is the best way to image, individually, OSes, so that the boot screen doesn't get changed?

View 5 Replies View Related

Dual Boot - Lost The Option To Boot Into XP

Nov 24, 2009

When my computer wouldn't turn on in the morning I did the usual diagnostics; unplug things one at time test with spare components etc... Any way I qucikly figured out the PSU was dead so I ordered a new one and was back up and running. However when I reassembled the computer after unplugging everything (and removing the m/b) I plugged the HDDs back into different SATA ports from which they orginally came. When I came to boot the computer up I got the error message: 'BOOTMGR missing' or it may have been 'NTLDR missing' I can't remember.

I fixed this problem by using the 7 startup repair utility. I have no problem booting into Windows 7, but I have lost the option to boot into my XP install on anther disk. I looked in the boot tab under System Configuration and the only OS showing is this Windows 7 install. So my question is this: how can I get the choice of which OS to boot back?

(I should mention that the XP install is on a different disk from the 7 install).

View 3 Replies View Related

Restoring Dual Boot Xp / Win 7 To Single Boot Xp

Dec 15, 2009

I've a Dual Boot with Xp/Win 7 on my office Desktop workstation. Window7 is the beta version of the Win 7. And like all other companies.... my company also want it's wallpaper and screen-saver on each machine ..... But i somehow manage to install Window 7 on my office Desktop.

Now i want to remove Window 7 partition and restore my Xp MBR and that too without using Windows Xp Bootable CD ( as CDs are not allowed in my company )...

How can i restore my Xp MBR while accessing my Xp Partition as i already have deleted my Windows 7 partition .

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved