Boot Manager/dual Boot Error
May 5, 2009
I'm having a problem every time I power on the system. I'm dual booting vista ultimate with win 7 build 7100; with vista I have no problem, but with 7 every time I start the system the first boot attempt gives me the error 0xc000000e after the boot manager display: "the boot selection failed because a required device is inaccessible".;after a reset the system boots 7 with no problems. Win 7 is installed in a brand new hd(seagate barracuda 1.5tb) and vista on a second hd.
I've search the web for people with a similar problem with no success. I've tryed already many solutions but the problem persists(latest bios for the motherboard, latest intel sata drivers, etc). I'm hoping that this could be a bug in win 7 instead of a hardware failure for the hd. Again, the strange thing is that this only happen after the power on. After that first error, no matter how many reboots, the system always boot without problems.
View 4 Replies
ADVERTISEMENT
Mar 11, 2009
How to Change the OS Name in Windows Boot Manager ?
View 0 Replies
View Related
Oct 14, 2009
I installed Windows 7 on a partitioned harddrive with vista on the other half. After the installation i have my boot menu with:Windows 7, Windows Vista, Windows vista still works but when i try and load windows 7 i get a boot error message
View 9 Replies
View Related
Nov 9, 2012
I have a laptop I bought a year ago on which a created a dual boot Win 7 (32bit)/Win XP SP3 install, each on a separate partition. It was my first Win 7/XP dual boot install, and my first personal system that I allowed to have a Win 7 install on it at all, so although I have plenty of experience working on pretty much every previous version of Windows, I have very little experience with Win 7 and dual boot configs.
Today about 2 hours ago my audio spontaneously stopped worked for no good reason, so after shutting down each program to see if that cured it (which it didn't), I restarted the system. Out of the blue, for the first time I've ever experienced it, I received the msg "MBR Error 1" - Press any key to boot from floppy. I don't have a floppy of course on my laptop, and if I press any key I simply get the same msg. I turned the system off for a few minutes to make sure it was a good cold boot, but every time I still get the same msg. I tried switching the BIOS setting from IDE to AHCI (IDE is required for XP to boot, AHCI required for Win 7), but I still get the same error msg before I'm even prompted with the OS boot selection, so it made no difference of course.
I looked up this issue and found various suggestions, but none of the ones I found took into consideration a dual boot config., they were all Win 7 specific solutions. I don't what to try and repair the MBR only to have it screw up my dual boot config and be unable to access XP, which is what I use almost exclusively, nor do i want to lose access to Win 7 if at all possible.
I had a backup HD of my complete system that I saved several months ago when I upgraded my HD, and I periodically refresh the most important files on it, so I'm currently running on the laptop in question using my old HD, and it's working just fine. Worst case I can just clone my old HD to my newer HD that's screwed up, but I'll still lose a lot of changes I've made to the OS since I upgraded the HD and have to reinstall and config a number of programs, so that's my last option. I'll also have to back up about 200GB of data from the newer HD which is much larger than my old HD, and then restore it back after the clone, something that will take a lot of time and unncessary effort if I can just fix the MBR.
View 4 Replies
View Related
Jun 9, 2009
I've installed 64bit win 7 on a 2nd partion of my main drive running vista 64bit. The installation all went smoothly and loaded into win 7.
But when restarted I did't get a windows boot manager screen so i could pick if I wish to load Vista or Windows 7, instead my system just loads straight into Vista.
Do I have to enable my system to be able to see the Windows 7 install?
View 3 Replies
View Related
Aug 31, 2009
I have a problem thaI am hoping someone has a solution to. I had previously installed Windows 7 RC on my computer. I then installed a SATA RAID PCI card and also installed a second HD. I attempted to install Vista on the second HD, but had problems and uninstalled it. When I try to boot up the boot up screen gives me the option of Windows 7 or setup. If I choose Windows 7, there is no problem. If I do not choose and the boot up continues in the setup mode I get an error message on the blue screen of death.
The computer shuts the start up in order to preserve the computer. It instructs me to remove the PCI card and HD and reinstall them. I have done that. I undertand that the boot up files fromVista are still on the the HD in a hidden folder. How do I correct this situation? Can I re-install Vista on the second HD and achieve the desired result? I formatted the second HD after the blue screen, but should I use a drive scrubber and remove all traces? If you know or believe you have an answer, I hope to hear from you.
View 2 Replies
View Related
Oct 2, 2012
I am trying to install Win 7 Ultimate x64 on my roommates laptop. It was having severe issues booting into 7 already so I decided to just wipe it and re-install. I started with a DVD copy and upon boot he realized that his DVD drive was broke. FML. But we can boot from USB so I go buy a large flashdrive and DL a copy of Windows 7 and make it boot-able. So I plug it in and when it starts to load windows files it makes it about 10% and stops.
Then throws an error 0xc00000e9. "An unexpected I/O error has occurred".
Now I know my USB is good, I just bought it. The DVD Drive is messed up but its not being used in any way. It's an older Sony vaio, Core 2 Duo, 2gb ram, the model is burnt off the bottom.
View 2 Replies
View Related
Nov 5, 2010
Just wanted to reinstall my Windows 7 this morning due to the fact that my dvd writer did not read of write CDs. After some research I learnt that a re-install will do the trick. how I don't know.My system statrt up, loads the windows 7 files and then comes up with the Windows Boot Manager screen stating that it has problems communicating with a device connected to your computer. Status: 0xc00000e9 Info: An unexpected I/O error has occurred.I have tried my 2 SSD drives in Raid 0 and also a single HDD with the same results.My DVD writer is an IDE model, but I can't think that this is the problem since the first time I used this drive and the same original Windows 7 Ultimate Disc there were no problems.I even went as far and got a PS2 keyboard to avoid any USB devices and also downloaded a full untouched version of Windows 7 with the same error! (Maybe my disc got scrtaches after its first use, I don't know)
View 3 Replies
View Related
Jul 16, 2012
Bootmgr is missing and I've tried every way but reinstalling. I want to reinstall but when it says expanding files it stays on 0 for 30 mins then a error message comes up and I can't reinstall.
View 9 Replies
View Related
Sep 7, 2012
Well first of all I started up my PC and it immediately jumped into Startup Repair maybe cause I didn't shut it down properly. It went through the repair and several times. By then I knew something was wrong, I checked the Diagnostics and see what Startup Repair had actually done. It turns out it could not fix an error with the OS Loader.It came up with two error code (0x2) and (0x490).I followed the following instructions:
1. bcdedit /export C:BCD_Backup
2. C:
3. cd Boot
4. attrib bcd -s -h -r
5. ren C:BootBCD BCD.old
6. bootrec /RebuildBCD
I also tried using /FixMBR and /FixBoot However none of these worked and my I tried booting up it came up with the same problem. I went back into the Windows 7 DVD and ran Startup Repair again. It said it was completed successfully but it said also if it doesn't boot then there's something wrong.Which leads to my new error screen that never goes away everytime I switch on the PC. The error message is as follows:A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source.If you have a Windows installation disc, insert the disc and restart your computer. Click "Repair You Computer," and then choose a recovery tool.Otherwise, to start Windows so you can investigate further, press the ENTER key to display the boot menu, press F8 for Advanced Boot Options, and select Last Known Good. If you understand why the digital signature cannot be verified and want to start Windows without this file, temporarily disable driver sginature enforcement.
File: WindowsSystem32Winload.exe
Status: 0xc0000428
Info: Windows cannot verify the digital signature for this file.
If I try and press ENTER it will take me to the boot menu and if I press ENTER to select an OS (I only have one) then it will jump back to the previous screen.
View 9 Replies
View Related
Nov 28, 2009
such as i wrote in the title i get error 0x80070570 when i try to install Windows 7
this the first time i face this problem because i install Windows 7 many times before on the same computer
the problem start with blue screens when i already have a Windows 7 so such as many people do i backup all my files and format C partition Then when i install Windows 7 i 0x80070570 problem so i format all of my hard disk and again i got this error
i tried alot of Solutions but all of them did not solve the problem
i tried to use system recovery options but it unavailing and it tell me boot Manager is missing or corrupt so i tried many commands like bootsect/nt60 and also no luck
now what can i do to solve this problem , can any one help me please ?
View 9 Replies
View Related
Nov 20, 2009
same problem as 4 weeks before. Dual Boot Windwos 7 and Xp. Windows 7 was installed first but today i install fresh original Windows 7 copy... Windows Xp (partiton F NTLDR error.
I'm not sure if must be NTLDR, NTDETECT and boot.ini at C: with Windows 7 or F: with Xp.
Sure, hide files are opened but still no files in C. There is only bootmgr.
I'll try copy files NTLDR and NTDETECT from WinXp CD at disc with Windows Xp... nothing happend.
What i need to do?
View 9 Replies
View Related
Dec 25, 2012
this is what I did, since I have no CD-ROM, to install Windows 7 I created a partion X: NTFS and set it as the ACTIVE ONE, the put there the Windows 7 installation files, and opened prompt command to type bootsect.exe /n60 X: , next I restarted my computer, and automatically it booted into the Windows 7 setup, I installed Windows 7 on the partition C: and formatted the partition C:, everything installed and after the installation finished, a multiple choice menu appears that reads:[CODE]
View 6 Replies
View Related
Nov 10, 2009
I installed Windows 7 64bit onto RAID 0+1 and XP on separate SATA drive. However, I now realise I re-formatted XP drive "out of sequence" in so much as I didn't follow the correct procedure to alter the boot sequence prior to re-format.
I can no longer boot into Windows 7, see following
The bios recognises the RAID setup - apologies for the poor quality.
I have tried running the startup & repair via install DVD, several times, but I keep getting the messsage that setup & repair did not detect any problems.
View 6 Replies
View Related
Mar 4, 2010
When I go to create the new partition in Windows 7 that I want to install XP on it creates it as a logical drive. How do I create a primary partition instead?
View 8 Replies
View Related
Jan 13, 2013
ihave windows 8 my lpatop is acer aspire E1-531, I am trying to install windows 7 but boot manager wont show me dvd boot !! it show me only network boot what can i do to be able to boot from dvd
View 2 Replies
View Related
Jun 11, 2011
I've been trying to install Windows 7 Pro upgrade as dual boot with XP Home, and keep getting the message (something like) "Disk read error - press ctr-alt-del to restart" at the first boot during the installation processHave checked the hard drive for errors, and there are none. Have replaced the hard drive with a brand new one, and get the same result.[I also tried installing Windows 7 Home Premium upgrade, and get the same result.] [code]
View 4 Replies
View Related
Aug 19, 2009
I have 3 hdd's.
1 x 160GB (SATA)
- Partition: ~149GB - Win Vista64
1 x 300GB (SATA)
- Partition: ~220GB - MISC
- Partition: ~58.5GB - Windows 7 64
1x 1TB (SATA)
- Partition: ~931GB - Games
I ended up taking my 300GB drive, created a logical partition, then booted into the Windows 7 dvd I have. (win 7 - 7100?, straight off ms)
Firstly, it takes about a couple minutes just to load the files. Then once it finally gets to the splash* screen and the cursor appears.....it takes about 5-10minutes for the "install" window to appear which seems VERY odd since my machine is VERY fast. It takes quite a bit of time to accomplish installing from loading to finished (40minutes maybe)...
After everything installs when I go to choose the Windows 7 option on the boot menu, I get this black SOD
Windowssystem32winloader.exe error 0xc000000D
Something about the file being missing or corrupt.
I took my Windows 7 disk, and entered command prompt through recovery tools (which takes at least 5 minutes due to loading time to get to each time).
I ran DISKPART, then did LIST VOL, so it would tell me the partitions and letters.
Then I took another window, and entered bcdedit. The letters matched up with the partition letters and the file DOES exist.
I've tried 3 different sources on 3 different DVD's to see if perhaps I had a bad image (1 x microsoft/2 x torrent), but that's not the case.
I've tried setting the path's again through bcdedit to make sure there was no data corruption in the settings, and that was not successful either...
So when I need to figure is out why it tells me the file "winloader.exe" is missing or corrupt, when in fact it is pointing to the right harddrive, on the right partition, on the right location.
Yes, they all show up on the BIOS post, yes it recognizes the 300GB drive in the setup without extra drivers. The only hdd it needs extra drivers for to see is my 1TB, but I'm not using that for the Windows 7 installation.
View 7 Replies
View Related
Aug 11, 2012
I have a Windows 7 installation (x64). I wanted to install windows xp 32 in a dual boot scenario for some backwards compatibility hardware issues (video stuff).Anyway, I read the various tutorials and I have used nlite to put sata drivers into my win xp install iso/cd.My problem is that windows xp won't I get the hard drive error message DURING the install (ie, the first time xp asks you to reboot, but long before it tries its various installation things) have tried the various things associated with this, Easybsd, a Windows 7 restore and using fixmbr/etc. I can get BACK into windows 7, but setting up the menu is pointless because xp never installs correctly to begin with. It seems that the guides on fixing this error message are assuming you get it after xp completes its install and tries to boot -- instead, I am getting the error DURING the install. I get a /windows directory on my partition, but it clearly isn't a complete install because I never see the windows install screens with the pictures, estimated time, etc.
View 6 Replies
View Related
Nov 20, 2009
i was wondering if i could get any tips or advice, i keep getting bsod error message when trying to install xp, it looks like i have to install the sata drivers, i think i have to slipstream the driver with xp as from my post here, but i cant find the sata driver for my toshiba hard drive anywhere. My sony vgn-aw120j does not have drivers for xp on the sony website and toshiba does not have drivers on theirs. my hard drive is a mk-3252gsx from toshiba,
View 9 Replies
View Related
Sep 12, 2011
i have a new work laptop with xp sp3 on it. I want to install w7 64 bit as a dual boot, but only have 1 physical drive. i cannot remove my current installation as it is pre-build from work, but can partition the drive etc. However on trying to install w7 64 bit I get a message saying cannot install windows 7 on efi drive with mbr, not gpt. Can I do what I want without screwing up my xp installation?
View 5 Replies
View Related
Mar 3, 2012
Just today I decided to download the Windows 8 consumer preview and setup my PC to dual boot with it.I am running Windows 7 home premium 64bit and the 64 bit windows 8 on my other partition. After setting up a separate partition on my hard drive and loading windows8 to this partition, I was all up and running. I had no problems setting up or running windows 8, the problem came when I booted back to windows 7 for the first time. When I booted into windows 7, I was getting the "unable to identify network" error, and no network connectivity.
First thing I tried was simply disable/enabling my network adapter thinking it was just some hiccup. No luck there. Next I pulled the power from my router, and let it completely reboot. Still no luck. I then shut down my pc and booted back into windows 8 and sure enough I am able to get internet connectivity when I am running windows 8. This got me to thinking that when I loaded windows 8 there may be some new drivers installed for my network card that are somehow causing issues when I load into windows 7 again. Not sure how this is possible.
I was under the understanding that when I loaded Win8 to the separate partition that it would keep all it's drivers and settings there and not effect anything when I was loaded back on windows 7 (This logic could be completely wrong, I don't know). So I rebooted and loaded back into windows 7, went into device manager and uninstalled both network adapters and drivers, and rebooted into windows 7 again so it could re-discover and setup the network cards with default windows 7 drivers. This did not work either and I am still getting the same error.
View 5 Replies
View Related
Nov 26, 2009
For some odd reason, after doing some changes to my partitions in Windows 7 and restarting my computer, I got the ol' "BOOTMGR is missing" message. I have the Windows 7 Repair Disc image file and a 4GB USB Flash Drive, but, sadly, no CDs. Is there any way that I can put the image file onto my USB Flash Drive and boot from it with my Acer Aspire X1200 desktop computer?
View 1 Replies
View Related
Oct 17, 2012
My computer has windows 7. I created a separate partition on my hard drive to install windows xp, but now when I try to install it I get an chkdsk /f error.
View 5 Replies
View Related
Oct 30, 2009
I have XP (x86) installed on one partition.
Last night I installed Windows 7 (x64) on a separate partition.
Anytime I had tried this in the past, using Vista, it always detected the Windows XP partition, and gave me a boot menu with "Earlier Version of Windows" option to boot to.
This is not so with Windows 7.
How can I get the boot menu to show both options, to boot to XP or to Windows 7?
View 9 Replies
View Related
Aug 8, 2012
I have dual boot with Xp and windows 7.when i log into my Xp all the restore points being deleted from windows 7.when i check the disk management information in 7 it shows windows 7 create a logical drive with my Xp primary drive.even i am hide the drive from both windows means Xp drive from windows 7 and vice verse.So i like to unmount or remove the drive partition of windows 7 from Xp and Xp primary from windows 7.So that they dont affect each others system files with being deleted the partitions.
View 1 Replies
View Related
Apr 6, 2012
I installed opensuse 12.1 on dual boot along with my other windows 7 installation. Installation of opensuse is successful and i can use it. But when I tried to use windows 7 on grub, it says bootmgr is missing. I've already encountered this problem a long time ago so i tried to use bootrec /fixmbr, bootrec /rebuildbcd and bootrec /fixboot in the recovery console in the windows 7 DVD. Rebuildbcd and fixboot did not work and it said something like it cannot find my windows installation. I also tried bootrec /scanos, it returned a windows installation on D:\Windows but my windows is in drive C. I think this has something to do with me messing up the active partition in disk management a month ago but i already fixed it by setting the active partition to the system reserved partition. Only fixmbr is successful, but now i can't boot on any OS because it says: Missing operating system.I also tried bcdboot C:\Windows but it failed with a message that goes like: Failure when attempting to copy boot information..
View 2 Replies
View Related
Sep 24, 2009
I was having win 7 RTM and i tried to installl OSx86 in second hard disk
after few failure i successfully installed OSx86 in my secondary had disk now the problem is that i cant boot win 7
i changed boot order i tried windows 7 disk repair
but both failed
im getting some Boot mldr missing...
Actually even OSx86 is not booting i get OSx86 boot screen with two hard disk to select if i select windows disk it still says the same Boot mldr missing.
View 3 Replies
View Related
Dec 3, 2010
I can't get Win 7 to boot after setting up dual boot (Ubuntu 10.10) on my GF's laptop. I'll describe the problem and everything that has been tried so far. REALLY hoping somebody has an idea, I'm getting desperate.I installed Ubuntu last night via the Live CD. Used the Live version to install alongside Windows and partition the drive, install Grub, etc. At reboot, after POST it would just go to a black screen with a flashing cursor. I could only run off the live CD. A forum member determined the Grub was trying to load from the wrong partition. We changed that and voila! Grub now loads properly. I can boot into Ubunto via Grub with zero problems. HOWEVER: when I try to boot into Win 7 from Grub, it just locks at the same flashing cursor of death screen. The 7 partition is till intact, I can see and access all the files on the 7 partition from within Ubuntu, however 7 will not boot. I have tried downloading and burning the Win 7 repair disk and doing all of the following,Running the automatic Start Up Repair - several times. All it does is remove Grub, but booting still goes to the flashing cursor and I have to reinstall Grub again to be able to do anything after POST.I have used the command prompt to run "bootsect /nt60 SYS /mbr". Has the same effect as above.I have used all the bootsec.exe /fixmbr, /fixboot, and /rebuildBCD commands. Again, all have the same effect and I have to reinstall Grub to get anywhere.I don't have an installation disk to try and just do a repair install because Asus apparently doesn't feel that I would need one of these. All I have is the recovery disks from the Asus AIRecovery application that want to just re-format the entire drive and start over. This isn't an option. It's my GF's laptop (mine gave up the ghost last week) and we both have WAY too much highly important data on here. Not to mention she would castrate me . Now from all my research the only other thing I've come across that sounds possible is that the boot flag needs to be set to a different partition. Somebody had a somewhat similar problem and it turned out the way Dell set up the system the boot flag had to be moved to a recovery partition and it worked fine. I'm wondering if Asus has something similar going on, but I can't figure out how to move the boot flag. I'm going on 12 straight hours of working on this now
View 9 Replies
View Related
Aug 27, 2009
I setup an XP/Windows 7 dual boot on two drives. Currently C: Windows 7, D:XP
Love Windows 7 and now I'm ready to convert to single boot Windows 7.
I'm not real savy re. bcdedit so will need very detailed instructions
I did find the command line in Windows 7 by going through accessories but I'm scared to go further without help.
Eventually I want to clean up the D:xp and use it for storage etc.
I'm guessing this procedure may have already be written up but I can't seem to find it.
View 9 Replies
View Related
Feb 23, 2012
I recently added a hard drive to my computer (SSD), and installed Windows 7 x64 onto it. The result being a dual boot system, which by default boots to the SSD, and optionally (by Windows Boot Menu), can be booted to the original drive (standard mechanical drive).
Initial setup went fine, however I decided to customize the Windows Boot Menu, so that logical names could be associated with each operating system instance. To do this I used EasyBCD and I altered the names in the Windows Boot Menu from: Quote:
Windows 7
Windows 7
to... Quote:
Windows 7 - SSD
Windows 7 - Standard Drive
Shortly after the modification I noticed that I was no longer able to boot into the original OS. Instead I was being presented with a "Repair Windows" option. Figuring that my EasyBCD "tampering" may have had something to do with the issue I decided to change the names back to "Windows 7" in the Windows Boot Menu. However doing so had no positive impact on boot up of the original OS.
After booting again into the original OS I accepted the "Repair Windows" option, and then left the computer over night to do it's "thing". After completion of the "Repair" the situation has deteriorated -
* Windows doesn't load (the same as before)
* Windows doesn't present a "Repair Windows" option (it did before)
* The computer reboots a short period after the "Starting Windows" screen is presented
As a side note the drive is in good health, and all data on it can be read from within Windows 7 when I boot to the SSD OS.
View 2 Replies
View Related
