For some odd reason, after doing some changes to my partitions in Windows 7 and restarting my computer, I got the ol' "BOOTMGR is missing" message. I have the Windows 7 Repair Disc image file and a 4GB USB Flash Drive, but, sadly, no CDs. Is there any way that I can put the image file onto my USB Flash Drive and boot from it with my Acer Aspire X1200 desktop computer?
View 1 RepliesSo I have an bit of an odd and I think unique problem (as many searches came up with no solutions). Simply put, my boot manager is missing, but only when my windows install disc is not in the disc drive. It started several months ago and I just left it be, let the disc it int he disc drive and it was not that big of a deal. But just did a clean install couple days ago I re-installed windows 7 ultimate 64-bit on my computer (using an upgrade disc if that makes a difference).I formatted the drive with what I guess is a quick format (the option the install disc gives you). I have tried doing a repair with the install disc but no problems are found every time I try.
View 1 Replies View RelatedWhen receiving this message on boot up attempt running windows 7 home premium on a dell 1545 laptop with a fresh install and new hard drive would the problem be hardware related or software? Any chance it could be hardware related to the motherboard or is it most likely software related to the OS install?
View 1 Replies View RelatedI've divided my disk into partitions and accidentally removed boot loader of windows and now I get "boot mgr is missing", so I cant load my windows I have a disk and put boot order in BIOS but it still does not give me an opportunity to install windows, so I have only openSUSE right now, and 2 partitions of windows with C: and D: disks. How to restore this bootloader or at least make install windows 7?
View 3 Replies View RelatedI use XP on my machine with two 300 GB HDs configured as RAID1 (Nvidia NForce 570 SLI). There are two partitions C (100 GB) for system and D (remaining 200 GB) for data. All is working fine.
Now I try to install Windows 7. First I resized D by 100 GB and installed Windows 7 on this new partition. I updated the Nvidia NForce RAID driver and can see correctly my RAID under Windows 7.
My problem now is that if I start my computer always the old XP boots up.
The Boot Manager is not present. The only way I can boot Windows 7 is to insert the
Windows 7 installation DVD (and not pressing any key) then Windows 7 is booting.
The boot manager is present but only on this new Windows 7 partition. I already tried (using EasyBCD under Windows 7) to add the old XP as a second entry in the Boot Manager but I was not able to boot XP using the boot manager.
I see the XP-Partition under Windows 7 and vice versa but it seems to be impossible to use the boot manager.
How can I install the Windows 7 Boot Manager on my XP-partition, thus I will be able to
choose whether to boot XP or Windows 7.
My laptop is msi laptop a msi fx420 It says BOOTMGR is missing .Before it happens I changed the active partition from the hidden partition to SYSTEM.I can't reformat it because there is no boot menu where i can change the boot priority.
View 3 Replies View RelatedI'm having an issue where my Windows boot manager is missing. However when trying to repair, there isn't even a win7 installation file on any of my HDDs. However if I search for a driver that may be located in a file, I can view all of my files on my C drive.
View 2 Replies View Relatedi recently got a new SSD and I've installed windows 7 home premium on it. However whenever i boot into my SSD's windows 7, it says that boot manager is missing. In order to boot into windows 7, i would have to change my first boot to my CD, when it asks me to press something to boot cd, i would just leave it. It would then come to a page that allows me to choose from the windows 7 installed on my SSD and the windows 7 installed on my old hard drive.
View 4 Replies View RelatedI updated my BIOS as I was having a problem mentioned in one of the updates. I was using the Easyflash2 by Asus and the update succeeded but when it re-booted I got the awful news..boot mgr missing. Would my best bet be to just re-image?
View 7 Replies View RelatedI am trying to install Windows 7 in Parallels on an iMac, but with no luck. I have spent hours with Apple and Parallels but they cannot succeed in helping me either. It all stumbles on the classic "Boot manager missing". Now, the question is, is it possible that this is because the Win 7 CD is faulty, or does anyone have any other solution? Ctrl+Alt+Del obviously does not work, as I am on a Mac.I have tried using a disk image. No luck.I have tried to de-activate the storage disk, leaving only the SSD with Mac Mountain Lion active.
View 1 Replies View RelatedBootmgr is missing and I've tried every way but reinstalling. I want to reinstall but when it says expanding files it stays on 0 for 30 mins then a error message comes up and I can't reinstall.
View 9 Replies View RelatedI just installed a new window 7 ultimate os to my 32 bit system and I doing something with my disk management. I actually delete the 21mb unallocate space in my disk management. After that I do some my work and browse the internet and shutdown the system but when I again starting my computer. It will nor work only a message appear on screen ...
Boot manager is missing ..
Press cltr+altr+del to restart...
Again and again only this message ...
I try to go boot manager by pressing f2 ,f12,f8 it it doesn't work, only pressing delete button it shows some options. It try to install a new os but it is not reading my cd/dvd or usb. When it check options it shown a massage that they are disable. Some stuff to enable my usb, dvd port or any way to start my system....
such as i wrote in the title i get error 0x80070570 when i try to install Windows 7
this the first time i face this problem because i install Windows 7 many times before on the same computer
the problem start with blue screens when i already have a Windows 7 so such as many people do i backup all my files and format C partition Then when i install Windows 7 i 0x80070570 problem so i format all of my hard disk and again i got this error
i tried alot of Solutions but all of them did not solve the problem
i tried to use system recovery options but it unavailing and it tell me boot Manager is missing or corrupt so i tried many commands like bootsect/nt60 and also no luck
now what can i do to solve this problem , can any one help me please ?
A new hard drive has been installed on my laptop. I tried to install windows 7 and it failed. I am missing the master boot manager. is there free software to fix this problem that I can burn to a dvd or usb flash drive?
View 2 Replies View RelatedI started the StartUp Repair again and it has this error: Code: Root cause found:
Boot manager is missing or corrupt.
Repair action: File repair.
Result: Failed. Error code = 0x15
time taken = 0 ms
What does this mean?
Went to test drive Windows 7 drive image backup and because the Vista/Windows 7 boot manager is on XP (triple boot), Windows 7 needs to run the backup to include XP drive as well.
Can I move the boot manager from XP to the Windows 7 drive so I can run the backup of Windows 7 without including XP's drive?
Note: Because I use Dell's Media Direct on Vista, only the XP drive is a Primary Drive, Vista & Windows 7 are Logical. Not sure if thats going to matter.
I'm OK with command prompt & bcdedit. What I'm not sure about is the term "store", Is it the store that contains the boot manager and by moving the store, will it reassign/rework the boot loaders for each OS drive?
I understand its critical to not make mistakes here and have exported the store to different locations including a thumb for backup. But if this goes bad, I might need help getting a bootable system back.
Wish I had a spare 2.5 drive lying around, it would have made testing Windows 7 a lot easier.
I installed Windows 7 X64 on my system where I first had a Vista installed on a 60GB partition on partition C of the first drive in the boot sequence. (two partitions C + D) And I have two other drives with only data H and P
When I installed Windows 7 I formatted the C partition and it installed flawless.
Then when I wanted to back an image, I found out that Windows 7 placed the bootmanager on the P drive. Removing the P drive an trying to fix it with the repair after booting from the DVD resulted in a message that this operating system was not supported. ?
After much searching I found that I could copy the bootmgr to the C drive.
Now my windows starts again as normal from the C drive. But I can see it is using some loader parts from the previously installed vista.
I would like to gave also this loader from Windows 7 but I cannot find how to get this done?
Is there anyone that has a clue?
this is what I did, since I have no CD-ROM, to install Windows 7 I created a partion X: NTFS and set it as the ACTIVE ONE, the put there the Windows 7 installation files, and opened prompt command to type bootsect.exe /n60 X: , next I restarted my computer, and automatically it booted into the Windows 7 setup, I installed Windows 7 on the partition C: and formatted the partition C:, everything installed and after the installation finished, a multiple choice menu appears that reads:[CODE]
View 6 Replies View RelatedHow to Change the OS Name in Windows Boot Manager ?
View 0 Replies View Relatedihave windows 8 my lpatop is acer aspire E1-531, I am trying to install windows 7 but boot manager wont show me dvd boot !! it show me only network boot what can i do to be able to boot from dvd
View 2 Replies View RelatedI'm having a problem every time I power on the system. I'm dual booting vista ultimate with win 7 build 7100; with vista I have no problem, but with 7 every time I start the system the first boot attempt gives me the error 0xc000000e after the boot manager display: "the boot selection failed because a required device is inaccessible".;after a reset the system boots 7 with no problems. Win 7 is installed in a brand new hd(seagate barracuda 1.5tb) and vista on a second hd.
I've search the web for people with a similar problem with no success. I've tryed already many solutions but the problem persists(latest bios for the motherboard, latest intel sata drivers, etc). I'm hoping that this could be a bug in win 7 instead of a hardware failure for the hd. Again, the strange thing is that this only happen after the power on. After that first error, no matter how many reboots, the system always boot without problems.
I recently purchased an Asus U36SD laptop and replaced the hard drive with a Samsung 830 SSD. I built recovery DVDs and installed Windows 7 on the SSD using these discs. Everything had been working fine for almost two weeks, but last night I got a blue screen of death after sleeping my computer for the weekend. I have seen the BSOD after booting from sleep before on another laptop so this wasn't too alarming to me especially after ~72 hrs of sleeping. However, this morning when I woke my laptop from sleep, I got the blue screen and my computer hung on restart until it entered the BIOS settings after some period of time. In the BIOS my SSD was missing. I turned off my computer and took out the battery for a minute, and retried and was able to boot into Windows. Within a minute I got another BSOD and my SSD disappeared again.
whether this is likely an SSD issue or some other hardware issue? This laptop is a PAIN to swap the SSD in and out because you have to unplug fragile keyboard and touchpad cables to access it, so I am weary of opening up the laptop if I don't have to, but I do suspect it could be an SSD issue.
I cannot boot into Windows because it says that the file /boot/BCD is missing with an error code of 0x0000007. If I run Repair from my installation disk and in System Recovery Options, it says that it has detected problems and asks if I want to repair it. The items it wants to repair are: " The following startup option will be repaired:Name: {bootmgr}Identifier: {9DEA862C-5CDD-4E70-ACC1-F32B344D4795}
The following startup options will be added:
Name: Windows 7 Ultimate (recovered)
Path: Windows
Windows Device: Partition=C: (476938MB)
Name: Windows Recovery Environment (recovered)
Path: Recovery9426aa67-30ff-11e0-a348-506313b5e718Winre.wim
Windows Device: Partition=C: (476938MB)
A copy of the current boot configuration data will be saved as C:BootBCD.Backup.0002"If I click yes, it says that it cannot save the current settings for the BCD and refuses to continue. When I choose Startup Repair, it attempts to fix the problem but fails.
The problem details are:
Root cause found:
No OS files found on disk.
Repair action: Partition table repair
Result: Failed. Error code: 0x3bc3
I think that this is because Startup Repair is trying to fix the thumbdrive that I keep my Windows 7 install files in. I am overseas now and as my computer does not have an internal optical disk drive and my external drive is back home, thus using my thumbdrive is the only way to access the repair console.
I tried running a few commands, namely:
bootrec /fixmbr
bootrec /fixboot
bootrec /rebuildbcd
Fixmbr and fixboot work, but when I run RebuildBCD, it detects C:Windows as having a Windows installation, but if I type Y(yes) or A(all), it says that the requested system device cannot be found.
After formatting hard drive to reinstall windows 7 its saying missing boot?
View 4 Replies View RelatedI have dual boot with Xp and windows 7.when i log into my Xp all the restore points being deleted from windows 7.when i check the disk management information in 7 it shows windows 7 create a logical drive with my Xp primary drive.even i am hide the drive from both windows means Xp drive from windows 7 and vice verse.So i like to unmount or remove the drive partition of windows 7 from Xp and Xp primary from windows 7.So that they dont affect each others system files with being deleted the partitions.
View 1 Replies View RelatedAbout 6 months ago I set up a new machine dual boot using GParted with the following configuration:
/dev/sda1 ntfs (Windows 7 system reserved) 100 MB
/dev/sda2 ntfs (Windows7 C: drive) 99 GB (includes 4 GB of preloaded page file space)
/dev/sda3 ntfs (Shared drive - Windows7 E: Drive / Ubuntu sda3) 801 GB
/dev/sda4 extended partition 32 GB
/dev/sda5 ext4 (Linux Root) 30 GB
/dev/sda6 linux-swap 2 GB
I set it up so that I could access my E: drive from either the windows or ubuntu operating system. It has worked perfectly so far (about 6 months). But, here is the problem:For some reason as the share drive (my E: drive / sda3) grows Windows thinks that the windows system drive (sda2/c:drive) is also growing. So that now I have a low storage warning stating that there is only 8.76 GB of free space left on my 99 GB C: drive. When, in reality, there should be about 77 GB of free space. I've made hidden files/folders viewable and downloaded treesizefree so I know what should be on the drive. The Treesizefree output shows the expected 22 GB of space but also shows only 9 GB of free space. So, the missing space is nearly exactly the size of my shared drive (sda3/E:drive). So somehow, I think the windows OS is double counting my shared E: drive against my C: drive.
I had a dual boot system with XP Pro and Vista Ultimate 32bit everything was great.
I decided to try the Windows 7 RC but I needed a new drive due to lack of space.
My original drive is IDE, I bought a SATA drive and moved the OS's to the new drive.
I wanted to keep the old drive in system for storage so I formatted it and changed BIOS boot priority.
After fixing some minor issues with drive letter assignments due to the fact the bios reads the first and second IDE channels first then SATA.
I was all ready to install Windows 7 RC on an unallocated 100gb section of my new drive.
Note: that the old drive has a single partition formatted NTFS but is currently blank.
And I did follow the "Golden Rule" of installing the oldest OS first when I set up the computer in the first place.
The Install went fine.
Now for the problem.
Windows 7 did not add an entry into Vista's boot manager so no option to boot into Windows 7 without the install disk in the drive.
I used EasyBCD 1.7.2 from within Vista to add an entry for Windows 7. But when initially added easyBCD assigns the drive partition a drive letter that I don't have.
Therefore the entry does not show up on reboot. I changed the path to the correct drive and then the entry does show up on reboot.
But when I select Windows 7 the boot manager refuses to load Windows 7 saying that "cannot verify the digital signature of the file winload.exe"
I have tried wiping and re-installing the Windows 7 partition 3 times I've tried using the Windows 7 install disk to repair startup problems.
None of these has worked I'm at a loss as to what is happening.
If Windows 7 created a hidden partition for recovery and boot files I'm unable to find it, I thought of trying and Linux Live CD to look for the hidden partition but have not done it yet. My thought was to delete this hidden partition and wipe the Windows 7 partition and format it before re-installing either from within Vista or during the Windows 7 install process via a command prompt in an attempt to keep Windows 7 from creating this hidden partition. The problem is that I don't believe this will solve the problem due to the digital signature error reported by Vista's boot manager.
Can anybody help me with this or at least bring a perspective that I may be over-looking?
I recently built my computer and installed a ssd and a hdd, the OS is on the ssd which is the c drive but since it is smaller than the hdd I tried to change the letters around and make the hdd the c drive using regedit because the default install location seems to be the c drive and after restarting the computer it boots up and says preparing your desktop then goes to a blue screen with just the cursor. I tried booting in safe mode and all I get there is a black screen also
View 9 Replies View RelatedI just got a computer for free, a Dell Studio 1555. When I got it, it would try to boot, then come to a screen that said that bootmgr.exe was missing. Sometimes I got a message that said something like mpio.sys was corrupted or missing. I have a Win 7 disk, so I put it in and tried to repair the installation. Each time I ran it, it said that the repair had failed. I tried to reinstall windows 7, and It made it to the first restart in the process. It showed the "Starting Windows" screen, but the colors of the windows logo never appeared, then I got the missing bootmgr screen. I decided to install Ubuntu and see if that worked, and it did (I installed it alongside the Windows installation). It was Ubuntu 10.04. I thought, "OK, so i'll just use this as a Linux machine"...and I decided to go back and reinstall so that I could use the entire hard drive. It never worked correctly again. Each subsequent time that I installed Ubuntu, I was told something along the lines of "Gnome Power Manager did not install correctly" and got a slow and choppy Ubuntu installation.Tried to install 11.10, and it failed completely. I opened the Ubuntu live from my usb drive, and opened the disk utility. I now cannot format, reformat, partition, or delete partitions on the drive. Is all of this just a case of a hard drive on its last legs, or is there something else going on here?
View 1 Replies View Relatedok so im having a weird problem thats probably very easy to fix.
background info: before my Windows 7 install i had 3 partitions
vista 64
xp 32
empty (soon to be linux)
when i downloaded the newest win 7 build i deleted my xp 32 partition and installed Windows 7 on that partition. because Windows 7 creates that "reserve partition" or what ever, it extended my EMPTY partition with my vista partion. which cause it to become a "logical drive" rather than a "boot" drive. aka i cannot figure out how to access my vista OS.. rather annoying since im just toying with Windows 7 atm.
2 months ago, I installed windows 7 pro with no problems at all. Fast forward to today, I decided to reformat because the boot would get stuck in the middle of trying to boot into windows, it wouldn't flash the windows logo. I didn't think much of it so I just reformatted. This is where my real troubles began.So I reinstall windows 7 pro with no problems (the boot disk is in there the cd drive the entire time) I install my programs and what not and install my updates. All 100% Fine. Then I take out the boot disk and restart again... and I get this error message saying:
Nvidia Boot Agent 229.0525
Copyright 2001-2005 Nvidia Corp
Copyright 1997-2000 Intel Corp
Client Mac Address: 00 30 1B BC1F59 GUID: 12973077-FFFF-FFFF-FFFF-FFFFFFFFFFFF DCHP....
Then I press escape, then it says this:
PXE-EA0: Network Boot Canceled
PXE-M0F: Exiting Nvidia Boot Agent
DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER
So the first time I got this error, I just thought, Oh, something must have happened no big deal, so I reformatted again and again. But I kept on getting the same exact error. It'll load into windows just fine when my install disc is in the cd drive, but when I take it out, that error pops up. *My windows is authentic, each time I have been able to validate my copy.* I have tried installing from my hard drive and from the install disc with same error.*
This is my current set up:
Shuttle XPC SN27P2 (Barebone) Comes with motherboard, PSU, and case.
AMD Athlon 64 X2 5200+ @2.6GHz 65W
PNY XLR8 GTS 250
OCZ Reaper Memory 4GB PC-6400 DDR2-800
WD 74GB Raptor
WD 640GB Internal
WD 2.0TB Internal
WD 1.5TB External
WD 400GB External
Cavalry 1.0TB External
Shuttle 450 Watt PSU
Logitech G15 + MX518 + FuncPad 1030 Blk on Blk
Sony Optirac 18x DVD-/+RW drive
Dual Samsung SyncMaster 225BW 22" LCD Wide Screen Monitors
So how can I get windows to boot up with out having the boot disk in the cd drive...It worked the very first time I installed windows 7 on my PC...