My laptop is msi laptop a msi fx420 It says BOOTMGR is missing .Before it happens I changed the active partition from the hidden partition to SYSTEM.I can't reformat it because there is no boot menu where i can change the boot priority.
View 3 RepliesWhen receiving this message on boot up attempt running windows 7 home premium on a dell 1545 laptop with a fresh install and new hard drive would the problem be hardware related or software? Any chance it could be hardware related to the motherboard or is it most likely software related to the OS install?
View 1 Replies View RelatedI've divided my disk into partitions and accidentally removed boot loader of windows and now I get "boot mgr is missing", so I cant load my windows I have a disk and put boot order in BIOS but it still does not give me an opportunity to install windows, so I have only openSUSE right now, and 2 partitions of windows with C: and D: disks. How to restore this bootloader or at least make install windows 7?
View 3 Replies View RelatedI use XP on my machine with two 300 GB HDs configured as RAID1 (Nvidia NForce 570 SLI). There are two partitions C (100 GB) for system and D (remaining 200 GB) for data. All is working fine.
Now I try to install Windows 7. First I resized D by 100 GB and installed Windows 7 on this new partition. I updated the Nvidia NForce RAID driver and can see correctly my RAID under Windows 7.
My problem now is that if I start my computer always the old XP boots up.
The Boot Manager is not present. The only way I can boot Windows 7 is to insert the
Windows 7 installation DVD (and not pressing any key) then Windows 7 is booting.
The boot manager is present but only on this new Windows 7 partition. I already tried (using EasyBCD under Windows 7) to add the old XP as a second entry in the Boot Manager but I was not able to boot XP using the boot manager.
I see the XP-Partition under Windows 7 and vice versa but it seems to be impossible to use the boot manager.
How can I install the Windows 7 Boot Manager on my XP-partition, thus I will be able to
choose whether to boot XP or Windows 7.
For some odd reason, after doing some changes to my partitions in Windows 7 and restarting my computer, I got the ol' "BOOTMGR is missing" message. I have the Windows 7 Repair Disc image file and a 4GB USB Flash Drive, but, sadly, no CDs. Is there any way that I can put the image file onto my USB Flash Drive and boot from it with my Acer Aspire X1200 desktop computer?
View 1 Replies View RelatedI'm having an issue where my Windows boot manager is missing. However when trying to repair, there isn't even a win7 installation file on any of my HDDs. However if I search for a driver that may be located in a file, I can view all of my files on my C drive.
View 2 Replies View Relatedi recently got a new SSD and I've installed windows 7 home premium on it. However whenever i boot into my SSD's windows 7, it says that boot manager is missing. In order to boot into windows 7, i would have to change my first boot to my CD, when it asks me to press something to boot cd, i would just leave it. It would then come to a page that allows me to choose from the windows 7 installed on my SSD and the windows 7 installed on my old hard drive.
View 4 Replies View RelatedI updated my BIOS as I was having a problem mentioned in one of the updates. I was using the Easyflash2 by Asus and the update succeeded but when it re-booted I got the awful news..boot mgr missing. Would my best bet be to just re-image?
View 7 Replies View RelatedI am trying to install Windows 7 in Parallels on an iMac, but with no luck. I have spent hours with Apple and Parallels but they cannot succeed in helping me either. It all stumbles on the classic "Boot manager missing". Now, the question is, is it possible that this is because the Win 7 CD is faulty, or does anyone have any other solution? Ctrl+Alt+Del obviously does not work, as I am on a Mac.I have tried using a disk image. No luck.I have tried to de-activate the storage disk, leaving only the SSD with Mac Mountain Lion active.
View 1 Replies View RelatedBootmgr is missing and I've tried every way but reinstalling. I want to reinstall but when it says expanding files it stays on 0 for 30 mins then a error message comes up and I can't reinstall.
View 9 Replies View RelatedI just installed a new window 7 ultimate os to my 32 bit system and I doing something with my disk management. I actually delete the 21mb unallocate space in my disk management. After that I do some my work and browse the internet and shutdown the system but when I again starting my computer. It will nor work only a message appear on screen ...
Boot manager is missing ..
Press cltr+altr+del to restart...
Again and again only this message ...
I try to go boot manager by pressing f2 ,f12,f8 it it doesn't work, only pressing delete button it shows some options. It try to install a new os but it is not reading my cd/dvd or usb. When it check options it shown a massage that they are disable. Some stuff to enable my usb, dvd port or any way to start my system....
such as i wrote in the title i get error 0x80070570 when i try to install Windows 7
this the first time i face this problem because i install Windows 7 many times before on the same computer
the problem start with blue screens when i already have a Windows 7 so such as many people do i backup all my files and format C partition Then when i install Windows 7 i 0x80070570 problem so i format all of my hard disk and again i got this error
i tried alot of Solutions but all of them did not solve the problem
i tried to use system recovery options but it unavailing and it tell me boot Manager is missing or corrupt so i tried many commands like bootsect/nt60 and also no luck
now what can i do to solve this problem , can any one help me please ?
A new hard drive has been installed on my laptop. I tried to install windows 7 and it failed. I am missing the master boot manager. is there free software to fix this problem that I can burn to a dvd or usb flash drive?
View 2 Replies View RelatedI started the StartUp Repair again and it has this error: Code: Root cause found:
Boot manager is missing or corrupt.
Repair action: File repair.
Result: Failed. Error code = 0x15
time taken = 0 ms
What does this mean?
So I have an bit of an odd and I think unique problem (as many searches came up with no solutions). Simply put, my boot manager is missing, but only when my windows install disc is not in the disc drive. It started several months ago and I just left it be, let the disc it int he disc drive and it was not that big of a deal. But just did a clean install couple days ago I re-installed windows 7 ultimate 64-bit on my computer (using an upgrade disc if that makes a difference).I formatted the drive with what I guess is a quick format (the option the install disc gives you). I have tried doing a repair with the install disc but no problems are found every time I try.
View 1 Replies View Relatedi'm new to this forum. My task manager is missing. If i press ctrl-alt-del, usually there is a menu that contain:
-Lock this computer
-switch user
-log off
-change a password...
-task manager
But now the Task Manager is missing! I don't know why! My computer is not just used by me, my brother and mother usually used it. I ask them but they said they don't know. Then is tried to search the task manager from 'start'. There is "View running process with Task Manager". I click it, but then show up a letter "Task manager has been disabled by your administrator."
When I access Task Manager the window opens and Task Manager operates fine;howeverthere is no way to exit. There is no minimize maximize close in the top right corner.The only way I can exit the program is to manually shut down the computer and re-boot.
View 9 Replies View RelatedI have a first generation envy 14 running windows 7 HP. Ports (COM and lpt) were showing up and working fine up until I reformatted the computer. I then noticed that they were gone. I installed all the drivers for my machine, most notably the chipset drivers, from the HP website. I enabled "show hidden devices" in device manager. I reformatted again, including trying windows 8 beta, and then back to 7.
I went through the bios to look for an option to turn ports on or off, and couldn't find it. So I updated to the latest bios and checked again, including finding a way into the advanced menu. I'm at a loss now... its like the ports don't exist?
I have a problem with my task manager as it will not load the running applications windows properly. I searched for a way to re-install only to find that it looks like my mstask.inf file (needed to re-install) is missing!
View 3 Replies View RelatedI have a problem locating my Realtek Hd Audio Manager, I have read through many posts such as updating your drivers, uninstalling then re-installing, restarting your computer, make sure to check my BIOS, check in control panel, things like that.
And in conclusion I think I have 2 possible explanations, the first one is that the current driver (updated) doesn't support the realtek hd audio manager? (I read on someone else's post that he had to rollback/downgrade his drivers for his audio manager to appear.
My last solution is... that I don't even have the Realtek Hd Audio manager chip on my motherboard? Possible Nvidia Hd Audio? Because I have 4 Nvidia Hd Audios, and only 1 Realtek.
This is what i'm using, Newegg.com - SONY VPCF116FX/B NoteBook Intel Core i7 720QM(1.60GHz) 16.4" 4GB Memory DDR3 1333 500GB HDD 7200rpm BD Combo NVIDIA GeForce GT 330M
I'll like to have a solution for this particular problem.
View 1 Replies View RelatedIt was working fine, I didn't install or change nothing (mostly is used as MediaCenter). It was working perfectly without any change for months. Then I shutdown one day as always, and when I reboot the next day no network is present.The PC is an Acer Aspire X3900 desktop with an integrated intel NIC. This is what I have seen: In the Windows 7 network configuration panel there isn't any NIC present. IPCONFIG shows nothing, no adapter is listed (is not like when you unplug the network cable and the adapter is listed buy without the IPs; now the command shows nothing at all). But, and that is the weird thing, in device manager all seems fine. The Intel NIC is listed without any warning mark. Looking the properties, all looks ok. This is what I had already try: I reinstalled the NIC drivers. No changes. Reinstalled the chipset drivers. No changes. Uninstalled NIC drivers with an Intel utility. Then I rebooted and reinstalled the drivers when windows detected the new hw. No changes. Disabled the NIC adapter in device manager, reboot and re-enable. No changes. Uninstalled the NIC adapter in device manager. Reboot and re-install the drivers when windows detect the new hw.No changes. Disabled the NIC adapter in BIOS. Boot windows, shutdown, re-enable the adapter in BIOS, and reboot. einstall the drivers. No change. Recover the system from an old recover point, but no change.
View 3 Replies View RelatedYesterday i was trying to detect my external HDD on my pc. So I opened diskmanager through diskmgmt.msc, then on the external drive I right clicked and chose enable "something"( my os is not english so i don't know the exact word) but the thing i should have done was just to give it a path. Then i also right clicked on one my C drive (btw my C is drive is partioned for some reason, 100 mb and rest) and did the same "enable" thing to it, too. Now when I try to boot my pc, it says BootMgr is missing. Now I cannot format because there were telabytes of information on my hardrivers regarding my projects and I also don't have windows 7 cd.I have been trying to boot from SSD in BIOS but no luck.windows 7 Professional 64 bitIntel i7 26004xKingston 4 gb 30 gb SSD2 tb HDDATI RADEON HD 6970
View 5 Replies View Relatedthis is what I did, since I have no CD-ROM, to install Windows 7 I created a partion X: NTFS and set it as the ACTIVE ONE, the put there the Windows 7 installation files, and opened prompt command to type bootsect.exe /n60 X: , next I restarted my computer, and automatically it booted into the Windows 7 setup, I installed Windows 7 on the partition C: and formatted the partition C:, everything installed and after the installation finished, a multiple choice menu appears that reads:[CODE]
View 6 Replies View RelatedFor some reason task manager folder got deleted when I try to open task manager it says this: "Windows cannot find 'C:windowssystem32 taskmgr.exe make sure you typed the name in correctly".
View 8 Replies View RelatedI have an emachines em350, I installed Windows 7 as a clean install onto a new hard drive.
It's al sweet except the sound and network adapters have not installed. In fact it seems that Windows 7 is declaring they never existed in the first place.
I have retrieved the latest drivers, Windows 7 spits them out stating that the devices are not present. I have tried the older versions using compatibility mode. I have tried install legacy hardware. I have tried to flush them out through command prompt. Nothing.
The sound 'card' (which I believe to be onboard) is seen by device manager, but refuses to have anything*to do with drivers.
The LAN I also believe is part of the motherboard, but it just won't show at all.
I just got a computer for free, a Dell Studio 1555. When I got it, it would try to boot, then come to a screen that said that bootmgr.exe was missing. Sometimes I got a message that said something like mpio.sys was corrupted or missing. I have a Win 7 disk, so I put it in and tried to repair the installation. Each time I ran it, it said that the repair had failed. I tried to reinstall windows 7, and It made it to the first restart in the process. It showed the "Starting Windows" screen, but the colors of the windows logo never appeared, then I got the missing bootmgr screen. I decided to install Ubuntu and see if that worked, and it did (I installed it alongside the Windows installation). It was Ubuntu 10.04. I thought, "OK, so i'll just use this as a Linux machine"...and I decided to go back and reinstall so that I could use the entire hard drive. It never worked correctly again. Each subsequent time that I installed Ubuntu, I was told something along the lines of "Gnome Power Manager did not install correctly" and got a slow and choppy Ubuntu installation.Tried to install 11.10, and it failed completely. I opened the Ubuntu live from my usb drive, and opened the disk utility. I now cannot format, reformat, partition, or delete partitions on the drive. Is all of this just a case of a hard drive on its last legs, or is there something else going on here?
View 1 Replies View RelatedHow to Change the OS Name in Windows Boot Manager ?
View 0 Replies View Relatedihave windows 8 my lpatop is acer aspire E1-531, I am trying to install windows 7 but boot manager wont show me dvd boot !! it show me only network boot what can i do to be able to boot from dvd
View 2 Replies View RelatedI'm having a problem every time I power on the system. I'm dual booting vista ultimate with win 7 build 7100; with vista I have no problem, but with 7 every time I start the system the first boot attempt gives me the error 0xc000000e after the boot manager display: "the boot selection failed because a required device is inaccessible".;after a reset the system boots 7 with no problems. Win 7 is installed in a brand new hd(seagate barracuda 1.5tb) and vista on a second hd.
I've search the web for people with a similar problem with no success. I've tryed already many solutions but the problem persists(latest bios for the motherboard, latest intel sata drivers, etc). I'm hoping that this could be a bug in win 7 instead of a hardware failure for the hd. Again, the strange thing is that this only happen after the power on. After that first error, no matter how many reboots, the system always boot without problems.
I had a dual boot system with XP Pro and Vista Ultimate 32bit everything was great.
I decided to try the Windows 7 RC but I needed a new drive due to lack of space.
My original drive is IDE, I bought a SATA drive and moved the OS's to the new drive.
I wanted to keep the old drive in system for storage so I formatted it and changed BIOS boot priority.
After fixing some minor issues with drive letter assignments due to the fact the bios reads the first and second IDE channels first then SATA.
I was all ready to install Windows 7 RC on an unallocated 100gb section of my new drive.
Note: that the old drive has a single partition formatted NTFS but is currently blank.
And I did follow the "Golden Rule" of installing the oldest OS first when I set up the computer in the first place.
The Install went fine.
Now for the problem.
Windows 7 did not add an entry into Vista's boot manager so no option to boot into Windows 7 without the install disk in the drive.
I used EasyBCD 1.7.2 from within Vista to add an entry for Windows 7. But when initially added easyBCD assigns the drive partition a drive letter that I don't have.
Therefore the entry does not show up on reboot. I changed the path to the correct drive and then the entry does show up on reboot.
But when I select Windows 7 the boot manager refuses to load Windows 7 saying that "cannot verify the digital signature of the file winload.exe"
I have tried wiping and re-installing the Windows 7 partition 3 times I've tried using the Windows 7 install disk to repair startup problems.
None of these has worked I'm at a loss as to what is happening.
If Windows 7 created a hidden partition for recovery and boot files I'm unable to find it, I thought of trying and Linux Live CD to look for the hidden partition but have not done it yet. My thought was to delete this hidden partition and wipe the Windows 7 partition and format it before re-installing either from within Vista or during the Windows 7 install process via a command prompt in an attempt to keep Windows 7 from creating this hidden partition. The problem is that I don't believe this will solve the problem due to the digital signature error reported by Vista's boot manager.
Can anybody help me with this or at least bring a perspective that I may be over-looking?