Windows 7 Boot Files Or Boot Manager Installed In Wrong Partition?

Dec 25, 2012

this is what I did, since I have no CD-ROM, to install Windows 7 I created a partion X: NTFS and set it as the ACTIVE ONE, the put there the Windows 7 installation files, and opened prompt command to type bootsect.exe /n60 X: , next I restarted my computer, and automatically it booted into the Windows 7 setup, I installed Windows 7 on the partition C: and formatted the partition C:, everything installed and after the installation finished, a multiple choice menu appears that reads:[CODE]

View 6 Replies


ADVERTISEMENT

Boot Manager On Wrong Drive

Nov 9, 2009

I installed Windows 7 X64 on my system where I first had a Vista installed on a 60GB partition on partition C of the first drive in the boot sequence. (two partitions C + D) And I have two other drives with only data H and P

When I installed Windows 7 I formatted the C partition and it installed flawless.

Then when I wanted to back an image, I found out that Windows 7 placed the bootmanager on the P drive. Removing the P drive an trying to fix it with the repair after booting from the DVD resulted in a message that this operating system was not supported. ?

After much searching I found that I could copy the bootmgr to the C drive.

Now my windows starts again as normal from the C drive. But I can see it is using some loader parts from the previously installed vista.

I would like to gave also this loader from Windows 7 but I cannot find how to get this done?

Is there anyone that has a clue?

View 6 Replies View Related

Windows Boot Files On Wrong Drive

Jan 22, 2013

I have a system which installed some boot files (i.e. Boot manager, Memory Tester and Windows Legacy OS loader) on the lowest numbered drive D: (the rest of course on C: which is the RAID partition where I want everything). I now know I should have disconnected the "D:" drive when I set the RAID up.

Anyone know of a sure-fire way of moving these files over without risk from D: to C: and then I can demote D: and remove the drive?

View 5 Replies View Related

Windows 7 Installed On Non Boot Partition?

Sep 19, 2012

So long story short, my current os (w7) is installed on a non-boot partition of a now internal drive that used to be external. This wasn't an issue/I didn't notice because I had another unused internal hdd which DID have an old bootable os partition, and then I'd just choose the correct instance of Windows when that one booted.I have to get rid of the old HDD with the bootable partition. Is there anyway I can change the non bootable my currant OS is on to a bootable partition (ie thru windows, cmd, bios etc)

View 7 Replies View Related

Installed Windows 7 On Same Partition As XP Unable To Boot The Former

Mar 10, 2011

Now, I've installed Win 7 (Professional) on the same as XP is installed. When I try to boot from HDD, I only get the XP entries, but can only boot Windows 7 through.

View 2 Replies View Related

Partition And Boot-manager-editor?

Feb 17, 2011

Is there a dynamic partition manager out there for Win 7...something like what Partition Manager used to be? Also, I'm thinking of adding a version of Linux to my system and I'm looking for an easy to use boot-manager-editor to use in Win 7?

View 4 Replies View Related

How Will Removing Partition Effect Boot Manager ?

Sep 11, 2009

I should know the answer to this question but my mind isn't working. I have done this before but can't remember how *exactly* I did it.

I took my sister's 150GB HD and set her up with a dual boot with Windows 7 and XP. She now wants me to take Windows 7 off and just use XP for a while. If I use a 3rd party partitioning tool to remove the Windows 7 partition FROM WITHIN XP, will this screw up the boot manager? I think it should be fine. Just take out the partition and extend the XP partition into the free space and it should just boot to XP. Is this correct?

View 8 Replies View Related

Wrong Boot Options In Boot Menu

May 6, 2012

I got this new computer and at some point I went into the boot option to try and install my PC to it's factory settings but when I opened up the boot option it showed something like this but not exactly:

1. MC43689SGDAL7
2. MATSHITADVD-RAM

This is very random and unusual and I have found no fix and as you should know it should look something like this:

1. CD/DVD Drive
2. USB
3. Hard Drive
4. something else

Even in my Bios menu it shows the same thing and I cannot change it so I can't boot from a USB or CD, etc.

View 3 Replies View Related

Dual Boot - Change OS Name In Windows Boot Manager

Mar 11, 2009

How to Change the OS Name in Windows Boot Manager ?

View 0 Replies View Related

Install Windows 7 But Boot Manager Won't Show Dvd Boot

Jan 13, 2013

ihave windows 8 my lpatop is acer aspire E1-531, I am trying to install windows 7 but boot manager wont show me dvd boot !! it show me only network boot what can i do to be able to boot from dvd

View 2 Replies View Related

Boot Files Installed On C But Not System Reserved?

Aug 26, 2011

Boot files etc have installed on C and not system reserved, why?Is it because I increased the size of the system reserved and then (maybe I) left the larger partition highlighted by mistake?I used Windows own install disk to format etc.

View 9 Replies View Related

Boot Camp Windows 7 Resized Partition Now Wont Boot?

Aug 23, 2012

I have a Boot Camped Mac Mini with Windows 7. I recently needed to allocate more disk space to it as i only had a gig left, i booted into MacOS and used Disk Utility to make the Mac partition smaller, i rebooted into windows and downloaded software called 'Partition Wizard' from www.partitionwizard.com. I dragged the Windows partition all the way so that it used up all the Unallocated Space, it required a reboot to finsih and when it did it displayed an error such as thistatus:0xc0000255Info: The Windows Boot Configuration Data file is missing required informationI have the Installation Disk and i have tried repairing more than 3 times and it seemed to do nothing, so i tried using the CMD and bootrec.exe and now when i start the repair wizard it says there is no windows partition yet i can still try repairing things (Yet still does not repair anything). I downloaded EasyBCD but im on my Mac partition right now and its an exe, i have no clue how to run that within windows to try and repair the Bootloader. I do however have access to the BOOTCAMP partition through the mac side, and i can access all the files. Is there some way i can repair the bootloader through this?

View 6 Replies View Related

Boot Manager/dual Boot Error

May 5, 2009

I'm having a problem every time I power on the system. I'm dual booting vista ultimate with win 7 build 7100; with vista I have no problem, but with 7 every time I start the system the first boot attempt gives me the error 0xc000000e after the boot manager display: "the boot selection failed because a required device is inaccessible".;after a reset the system boots 7 with no problems. Win 7 is installed in a brand new hd(seagate barracuda 1.5tb) and vista on a second hd.

I've search the web for people with a similar problem with no success. I've tryed already many solutions but the problem persists(latest bios for the motherboard, latest intel sata drivers, etc). I'm hoping that this could be a bug in win 7 instead of a hardware failure for the hd. Again, the strange thing is that this only happen after the power on. After that first error, no matter how many reboots, the system always boot without problems.

View 4 Replies View Related

Boot Manager Missing / Boot From USB Drive

Nov 26, 2009

For some odd reason, after doing some changes to my partitions in Windows 7 and restarting my computer, I got the ol' "BOOTMGR is missing" message. I have the Windows 7 Repair Disc image file and a 4GB USB Flash Drive, but, sadly, no CDs. Is there any way that I can put the image file onto my USB Flash Drive and boot from it with my Acer Aspire X1200 desktop computer?

View 1 Replies View Related

Installed New Boot SSD / Internet Connectivity On Boot Up

Feb 7, 2012

I recently installed a new SSD and put my OS on it but every now and then when I boot up it just wont get an internet connection.Once its booted up and I restart Windows though its fine.It doesn't happen everytime but 50% or so I'd say on boot up.I'm thinking its something to do with how fast its booting up now and for some reason my network settings or drivers have not had a chance to load or something and its not getting a handshake with my router.

View 4 Replies View Related

Wrong Boot Screen

Feb 5, 2009

I originally had Vista Ultimate x64 and Windows 7 x64 dual booting fine.

I had a problem with Windows 7 - my fault- needing me to restore an Acronis backup.

I still am able to dual boot but Windows 7 now uses the Vista boot up sequence up to the Welcome screen, i.e. it does not show the sexy new dots morphing into the Windows Logo.

Any ideas where to look for an answer.

View 9 Replies View Related

Cannot Boot Win 7 RC From Vista Boot Manager

Jun 25, 2009

I had a dual boot system with XP Pro and Vista Ultimate 32bit everything was great.

I decided to try the Windows 7 RC but I needed a new drive due to lack of space.

My original drive is IDE, I bought a SATA drive and moved the OS's to the new drive.

I wanted to keep the old drive in system for storage so I formatted it and changed BIOS boot priority.

After fixing some minor issues with drive letter assignments due to the fact the bios reads the first and second IDE channels first then SATA.

I was all ready to install Windows 7 RC on an unallocated 100gb section of my new drive.

Note: that the old drive has a single partition formatted NTFS but is currently blank.

And I did follow the "Golden Rule" of installing the oldest OS first when I set up the computer in the first place.

The Install went fine.

Now for the problem.

Windows 7 did not add an entry into Vista's boot manager so no option to boot into Windows 7 without the install disk in the drive.

I used EasyBCD 1.7.2 from within Vista to add an entry for Windows 7. But when initially added easyBCD assigns the drive partition a drive letter that I don't have.

Therefore the entry does not show up on reboot. I changed the path to the correct drive and then the entry does show up on reboot.

But when I select Windows 7 the boot manager refuses to load Windows 7 saying that "cannot verify the digital signature of the file winload.exe"

I have tried wiping and re-installing the Windows 7 partition 3 times I've tried using the Windows 7 install disk to repair startup problems.

None of these has worked I'm at a loss as to what is happening.

If Windows 7 created a hidden partition for recovery and boot files I'm unable to find it, I thought of trying and Linux Live CD to look for the hidden partition but have not done it yet. My thought was to delete this hidden partition and wipe the Windows 7 partition and format it before re-installing either from within Vista or during the Windows 7 install process via a command prompt in an attempt to keep Windows 7 from creating this hidden partition. The problem is that I don't believe this will solve the problem due to the digital signature error reported by Vista's boot manager.

Can anybody help me with this or at least bring a perspective that I may be over-looking?

View 9 Replies View Related

Lost Boot Files To Boot Into Windows 7?

Jun 6, 2010

Just now I lost boot files to boot into Windows 7... I am running triple boot with XP, Vista and Windows 7,.... Now I cannot boot into Windows 7 XP and Visa are OK... I can see and access Windows 7 drive from any of 2 OS but can not boot into it.

View 9 Replies View Related

Dual Boot With XP, Boots From Wrong Drive

Jan 5, 2010

I installed windows 7 x64 RC a while back, and it detected windows xp and set up a dual boot. All was well.

I had a PSU failure, and i replaced the PSU. I set the BIOS to boot from the drive with windows 7 on it. It wouldn't boot. I set the bios to boot from the drive with windows Xp on it, and it booted to the dual boot screen.

Apparently, windows 7 placed the boot information on the old XP drive, so if i try to boot to windows 7 from the windows 7 drive, its a no go.

Now, this wouldnt' bug me so much, except that i want to replace the Xp drive with a larger 1tb drive. I don't need XP anymore, and do need storage (xp drive is 160gb). if i remove the XP drive, windows 7 won't boot. How can i fix this?

View 7 Replies View Related

Copy Laptop HDD To Boot From One Partition And Run A New Windows 7 Pro OS From The Second Partition?

Dec 19, 2012

I'm building a new computer. Can I partition the hard disk, copy my laptop HD to boot from one partition and run a new windows 7 pro os from the second partition?

View 5 Replies View Related

Wrong Drive Letters In Multi Boot XP,Vista, Win7

Jun 29, 2009

FIX (with SavePart, tried other partition utilities and editing MountedDevices to no avail)

Hope this helps someone else with Wrong Drive Letter Problems

Installed Windows 7 RC and all was well with XP Dual Boot.

After some experimenting(BSD,LINUX,etc), Windows 7 would not boot, so popped in the DVD and let Windows 7 repair the boot.

Windows 7 now booted, but when booting XP on E: , it was now assigned the wrong Drive letter D: and would boot to just before the Logon Prompt and hang(same in safe mode.)

After much research and trial (including editing the HKLM/SYSTEM/MountedDevices hive of the XP install from within Windows 7 to change the drive letter) this was the fix.

This particular XP boots from Partition/Drive E: in Windows.0 directory (yeah, i know, been this way for years)

FIX: (FREE!)

downloaded SavePart "AKA Partition Saving " Partition Saving

Boot from a FreeDOS Floppy or USB stick and run SavePart.exe

within SavePart (navigate with TAB key, Selected items turn BLACK)

Choose:

Update Windows 2000/XP/Vista Registry

then
Choose element where boot configuration are stored (Disk number 0, in this case)

then
Choose element where boot configuration DATA are stored (Partition) where the XP(2000 or Vista) is located

then
Select the Directory where the XP (2000 or Vista) is located (Windows.0 on D Drive, in this case)

You then have access/ability to the change Drive Letters for that particular Windows Installation:

In this case:

Drive D (which needed to be E) and Drive E(which needed to be D)

View 5 Replies View Related

Get Rid Of Windows 7 Boot Manager?

May 7, 2010

I tried to install WIN 7 to a NEW HD (clean install) since you cannot do a WIN XP upgrade install. I left my old C: drive (WIN XP) hooked up while I installed WIN 7 to the NEW drive. Afterward I decided that my computer is too slow to effectively run WIN 7 so I took the NEW drive out (WIN 7 installation) and intend to put it in a new faster computer.Now when I try to boot up my old C: drive with WIN XP, I get a WIN 7 Boot Manager. What a PAIN in the A--. How do I get rid of the Boot Manager so my WIN XP will boot up normally?

View 1 Replies View Related

Windows 7 Boot Manager?

Nov 17, 2012

I have a windows 7 home premium 64 bit. And when i start the system i get the following message.Boot Manager:Windows failed to start. A recent hardware of software change might be the cause. To fix the problem:1.Insert your Windows installation disc and restart the computer.2.Choose your language settings, and then click "Next".3.Click "Repair your computer."If you do not have this disc, contact your system administrator or computer manufacturer for assistance.Info: an error occurred while attempting to read the boot configuration dataI searched the forums. But unfortunately i don have the installation disc.Is there any other way to get through this.

View 1 Replies View Related

Windows Boot Manager

Jan 15, 2013

on power up the computer goes to a screen and at the top says Windows Boot Manager. insert windows disc. language, repair, Status: 0xc000000f
info: boot selection failed because a required device is inaccessible. So, I hit enter and it always goes back to same screen. I will not let me F8!!! I will let me F2 and F12. I do not have any disc to reinstall windows.

View 5 Replies View Related

How To Use Windows 7 Boot Manager ?

Mar 7, 2009

I have a system running XP. I partitioned my drive in half and installed Windows 7. I tried to start XP again and messed it up. I think it's trying to use XPs boot manager. Do I need to re-install 7 to use it's boot manager?

Now that I know this .iso works great, I want to put 7 on a partition on my main Vista system. I can't afford to lose everything like I did on the XP system. When I tried to start XP after installing 7 I got an error. "windows root system32 hal.dll is missing or corrupt"

I can't have that happening to my main system. Is this normal? Did I do something wrong? Will it happen to Vista?

View 1 Replies View Related

Compressed Boot Manager In Windows 7

May 13, 2010

when we compress the disk space entirely by going to my computer --> right click on the c: drive icon ---> properties ---> compress disk drive, the compression utility in win 7 accidently may compress the boot manager files that include the file bootsect.bak and the boot folder also . when the computer is restarted the machine hangs up and says "boot manager is compressed " and shuts down .at the prompt type notepad (since the recovery option boots from a seperate wim image it has notepad built into it ) press ctrl + o which invokes the open file dialog go to the open file field (ALT+N) and type c:oot and also see for the c:ootmgr file. right click it and deselect the option of "compress files to save disk space" when we apply the boot manager is again decompressed. also if someone finds this harder we can directly deselect the compression option by reversing the process used to compress the drive thats it . we are done

View 1 Replies View Related

Windows Boot Manager Screen?

Jan 21, 2012

I used to have both XP & 7 & removed XP. I used to have to select from a black & white screen called Windows Boot Manager. Now it shows only 7 and I have to select it. How do I get rid of this screen?

View 1 Replies View Related

Windows 7 Boot Manager Missing?

Nov 14, 2012

I'm having an issue where my Windows boot manager is missing. However when trying to repair, there isn't even a win7 installation file on any of my HDDs. However if I search for a driver that may be located in a file, I can view all of my files on my C drive.

View 2 Replies View Related

Corrupt Windows 7 Boot Manager?

Aug 16, 2012

When I start my computer I receive a message that says "Windows Boot Manager: The boot selection failed because a required device is inaccessible.: When I try to use the Windows 7 Recovery Disk to repair the computer I get a blue screen of death. I have a reburbished Dell GX620 that currently runs Windows 7 that I believe orginally had Windows XP.

View 4 Replies View Related

Windows Boot Manager Keeps Starting Up

May 12, 2011

Everytime I start up i get this annoying screen:

1. How do I removed this from my startup

I have set my msconfig right:

and i also did disable here:

What the **** is wrong!

View 9 Replies View Related

Windows 7 Os Boot Manager Usage

Jan 19, 2012

I am told that the Windows 7 OS uses a bootmgr to boot up windows. Can anyone explain this process in a way that I can understand.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved