Just now I lost boot files to boot into Windows 7... I am running triple boot with XP, Vista and Windows 7,.... Now I cannot boot into Windows 7 XP and Visa are OK... I can see and access Windows 7 drive from any of 2 OS but can not boot into it.
View 9 RepliesWhen my computer wouldn't turn on in the morning I did the usual diagnostics; unplug things one at time test with spare components etc... Any way I qucikly figured out the PSU was dead so I ordered a new one and was back up and running. However when I reassembled the computer after unplugging everything (and removing the m/b) I plugged the HDDs back into different SATA ports from which they orginally came. When I came to boot the computer up I got the error message: 'BOOTMGR missing' or it may have been 'NTLDR missing' I can't remember.
I fixed this problem by using the 7 startup repair utility. I have no problem booting into Windows 7, but I have lost the option to boot into my XP install on anther disk. I looked in the boot tab under System Configuration and the only OS showing is this Windows 7 install. So my question is this: how can I get the choice of which OS to boot back?
(I should mention that the XP install is on a different disk from the 7 install).
this is what I did, since I have no CD-ROM, to install Windows 7 I created a partion X: NTFS and set it as the ACTIVE ONE, the put there the Windows 7 installation files, and opened prompt command to type bootsect.exe /n60 X: , next I restarted my computer, and automatically it booted into the Windows 7 setup, I installed Windows 7 on the partition C: and formatted the partition C:, everything installed and after the installation finished, a multiple choice menu appears that reads:[CODE]
View 6 Replies View RelatedI was trying to restore my Toshiba Sattelite L645-S4056 to factory default and reinstall windows 7 by inbuilt recovery system. While i was formatting the computer swtiched off itself. Then i couldnot access inbuilt recovery during booting. The computer wont boot with any windwos cd. It said something like "Cannot boot.Enter a bootable disc". I then installed a linux distero by booting with a USB device.The linux system works fine but i need windows 7. It shows that my hardisk is totally empty. There is no reserved part previously occupied by recovery system.I didn't get a recovery disc with my laptop. Any other dvd wont boot. How can i install back my Windows 7? What is wrong with the system? Is there any way to get windows 7 back?
View 3 Replies View RelatedI had Windows 7 and Xubuntu set up in dual boot by EasyBCD, a well known utility.Today the linux kernel has been updated and, after the following reboot, the choice of Xubuntu OS at the dual boot prompt didn't work.So I went through Windows, launched EasyBCD to fix things and:
- changed the order the entries (Win 7 up, first)
- selected Windows 7 as default OS
- removed Xubuntu entry
- added again Xubuntu entry through EasyBCD procedure
- saved (maybe I should have saved after each of the changes)
When I rebooted I've found that two identical Xubuntu entries, each pointing to the Linux OS, and no Win 7.I've tried to access Win 7 by Grub, but it points to the dual boot screen, so I'm at start point again.I don't have the Win 7 disk but the usual recovery partition. No backup. Going through the recovery partition gets me back to the dual boot screen..Is there any way to put it in order again? Could you suggestions work in this case?I know that, from Linux, I can install and overwrite MBR with free mbr.bin
sudo apt-get install syslinux
sudo dd if=/usr/lib/syslinux/mbr.bin of=/dev/sda
But I'm not sure it will give me back Windows 7.
I have messed up my dual boot of XP Pro and Seven
Seven was working well, but XP was playing up.
I did a restore from an earlier acronis image of XP.
XP now works again, but as you have guessed I have lost the dual boot menu to select Windows 7 when I bootup.
I know boot.ini does not apply with Seven.
Please tell me how to get my neatly tweaked Seven back on the boot menu,
I wanted to install more RAM, but Supermicro support told me I needed to update BIOS (flash it) to enable it to accept higher RAM.After I did this, the BIOS seems to have lost the record that boots my Windows 7 installation. After going through the checks, it just comes up with "Operating System not found."So I thought that, since I have two SATA drives, I could try installing Windows on my redundant disk to see if that might generate a dual boot menu.I was able to successfully install a fresh copy of Windows on the 2nd disk, but it will only boot into that one. It seems my system has completely forgotten about my other, working, installation.Is there a process for recovering the boot information and setting it up such that I can go back to using my other installation?
View 2 Replies View RelatedThe problem I'm having is that I had been running WinXP SP3, I used GParted to partition my hdd so I could do a clean install and try out windows 7. The odd thing is though, at first when it would boot up I'd have two option to select from, either "Windows 7" or "Select an older version of windows", then I reinstalled windows 7 at one point(to the same partition used before) and lost that menu all together, now whenever I turn my PC on it just acts like windows 7 is the only OS installed.
I know my other partition is still there though, my question is, how would I go about retrieving it if possible. Can I just pop in my WinXP disc and do a repair or recovery on the other partition? Never had this problem dual booting windows and linux so im unsure as to what I should do.
I've routinely dual booted Linux and Windows over the years, but yesterday I hit a bit of a snag. I had Windows 7 and Vista both installed on a single hard disk. Since it had been awhile since I had booted Vista I decided to delete the partition and install Linux there. What I did not realize is that when I installed 7 it left the BCD on the Vista partition. So, when I installed Linux I effectively blew away my Windows boot loader.I've tried a hundred things at this point without much luck, including the "nuclear holocaust" / manual rebuild of BCD from:Recovering the Vista Bootloader from the DVD - NeoSmart Technologies WikiA few questions / thoughts from my google searches:* Is there anything needed in /boot other than the BCD?
* I am wondering if the "active" / "boot" partition flag is causing me trouble. hen I was trying to rebuild the BCD manually using bcdedit i was getting errors that the partition was not flagged active. I tried to use diskpart to flag it active but it said that the partition type was not valid for the active flag? I was able to set it active using the Linux gparted partition manager, but I can't understand why diskpart would not flag it.* Is it possible to have your oot on a different partition then Windows? The recovery console is mapping C: to my "applications" drive and D: to my "system" drive which contains Windows. I was wondering if I need to put oot on C: instead of D:
After I installed Windows 7 64 to dual boot with Win732, and fixed the boot menu to show both options (thanks to those of you that helped with that), I somehow lost the animated boot screen splash. I now have the "Vista" green bar.
Is there a setting somewhere that controls this?
MSI Wind 210 Netbook, 250 gig hd, vista (came with it) then upgraded to Windows 7 (2nd boot option)I deleted the dual boot menu using partition doctor (dumb mistake, dont ask) now all that shows up when I goto boot is,bootmgr is missing,press any key to restart,pressing a key.intel undii, pxe-2.1 (build 082)reboot and select proper boot device,thats it,It came with restore via the f3 key option on boot , but that shows nothing
View 9 Replies View RelatedOk, i have windows 7 already installed fine on my 2x raptor raided drives, i decided to install xp 32 on a new partition on the 2x raided raptors, after using nlite to integrate my raid drivers into the new xp iso (no floppy) it installed fine on the new partition.
However, i saw no boot menu on reboot and every time xp would load by default with f8 showing no other OS to boot. I then ran the windows 7 64 dvd and attempted a repair of startup option, it failed 5 times in a row quoting a corrupt boot sector.
I was all ready to give up when suddenly it just repaired it after the 6th attempt, i did nothing different but it said to reboot so i did and to my incredible relief my win 7 install started booting again.
But again, no boot menu and this time the xp boot has been lost! Is there any way i can manually add something to get a dual boot function running?
I have lost the ability to dual boot after installing windows XP.
I Originally had windows XP. I partitioned the drive in order to install windows 7. Installed windows 7 fine, no problems, was able to dual boot. After getting data from XP partition. I decided to do a clean install of xp. After doing that my machine only boots into XP, I no longer have the dual boot option.
I have tried booting off the windows 7 dvd and 'repair computer'. It said it found some problems and fixed them. Rebooted, still only booted into XP. Tried booting off DVD again ran 'Startup Repair option' Again, said it fixed some things, still only boots into XP.
I also tried EasyBCD and it said it fixed the problems, but everything is still the same. I can only boot into windows xp. No dual boot.
My boot.ini, ntldr and ntdetect are all on partition that has windows 7 installed.
Saw the posts about Vistabootpro but wanted to make sure i went that route before i purchased it and wanted to make sure of the correct steps to follow.
So I just got my hands on Windows 7 and wanted to play around with it, and everything works but:
Previous Computer Setup:
I had a dual boot with XP and Vista that worked perfectly (both OS's were on separate HD's and worked / booted correctly.)
Drive C: --------> Vista (Now Windows 7)
Drive D: --------> Windows XP
Problem:
After upgrading my Vista to Windows 7 (Via clean install) I lost my boot menu to choose XP. Now everytime I flip the power it boots DIRECTLY into Windows 7.
How do I recover my boot screen option so I can boot back into XP when I need to?
i used win 7 and wanted to install xp as a multi-boot on my laptop for trying an xp based encyclopedia but when i installed xp i got error "ERROR LOADING OPERATING SYSTEM" so i reinstalled xp and realized that i cant see my 2 25 gb partitions full of data,so kindly guide me to get my partitions back i have currently reinstall win 7.
View 2 Replies View RelatedI just installed windows 7 ultimate on my pc.
i already had xp32 and vista 64 business on a dual boot on the same HDD before installing windows 7.
during windows 7 install, I selected the xp32 partition, formatted it and installed windows 7 over the top as I no longer wanted xp32.
When the windows 7 install was complete I expected to see a dual boot screen with
option 1. windows 7
and option 2. vista64
unfortunatelty i have no dual boot options, the pc now just goes straight into windows 7. It doesnt sem to know that vista is there.
i would appreciate assistance in getting a dual boot set up with vista64 and windows 7
I lost access to my windows 7 drive (Dual-boot windows 7 & Ubuntu). every time I try to run Windows 7 I get the message: Bootmgr is compressed, Press CTRL_ALT-DEL to restart. I could run Bootrec /fixmbr or diskpart or attrib to rebuild my mbr table through DOS command window using my windows 7 recovery CD. The problem I cannot access drive C: where my windows 7 are. I get the error message: Cannot open volume for direct access or system cannot find the drive path or specified. I still can access all my windows folders and files through home folder in Ubuntu. I don't want to reformat and reinstall windows. Is there is a way to run the DOS commands within Ubuntu
View 3 Replies View Related[code] Reboot and select proper boot device or insert boot media in selected boot devic &press any key
View 4 Replies View RelatedI was getting notification bubbles in W7 about many of my .exe files being corrupt, including chrome.exe and a few other programs. The notifications recommended that I run Chkdsk, so I went to the C: properties and chose Disk Cleanup, or whatever Chkdsk is called in the menu, I forget at the moment. Well, when I did that, I got yet another notification, this time saying that Chkdsk.exe is corrupt, and recommending that I run Chkdsk (lol). Well, I apparently chose to schedule Chkdsk to run on next startup. But after I shut down to let it run I booted up and after my Dell screen I get....nothing.
Just a blinking horizontal bar, looks like that little input cursor flipped on its side, in the top left corner. I'm running Ubuntu 11.10 on a USB flash drive at the moment, what can I do from here? Until this happened I've never used a Linux OS before so I'm not very savvy with it yet, but when I view my partitions on here (500GB HDD) I see that 451GB is Unknown, in a partition manager there is a red flag notification saying that I have bad sectors, which I already knew. I've heard a lot about running a program called ntfsprogs, but I can't find it. Is there any way to recover my Windows 7 boot without losing any of my data on there?
From the title that i state. i hope some1 can share with me list of windows boot files for windows 7, Vista and XP
View 7 Replies View RelatedI'm away from my new Windows 7 box ATM, but am curious. Has anyone here looked into how Windows 7, out of the box, positions boot files on a HD? Does it simply group them together wherever there is space or does it also position the group on faster outer tracks/cylinders?
View 1 Replies View RelatedI like many others have a dual boot with Vista and now want to delete it. I have read other threads about using "Startup and Recovery" to remove Windows Vista from the Splash screen and then Formatting that Vista partition.
However I have also read something about Windows 7 using boot files from the Vista partition. How do I no if Windows 7 is doing this or not. I believe Windows 7 is the primary boot OS.
when I turn on my pc I get the follolwing error message "Reboot and select proper boot device or insert boot media in selected boot device and press a key".
View 1 Replies View Relatedwhere are the ntldr, boot.ini files located in windows 7, and windows vista? if there are no boot ini, where is the boot loader found in the c drive? do not need to know about bcdedit. i just need to know location of the ntldr file of windows 7 and vista. or any other files related to boot loading and startup.
View 7 Replies View RelatedI have an Advent Roma 2001 configured, in PC World style, with a "recovery partition" alongside the system partition and, after resolving a hard disk problem, I found that the machine would not start/boot Windows 7. clearly some necessary files are missing or corrupted, but the normal system recovery tools have not solved the problem(s). I'm familiar with the process for resurrecting XP, but not its counterpart for Windows 7 the files and steps for doing this are rather different. it would seem that pretty much everything else is in place on the hard disk, but certain recovery programs report "0" Windows installations when Win 7 is still in place where it was before the disk problem, e.g. it is available to be selected by the main recovery/startup program...this prog can "see" it, but can't access/boot it.I can breathe some life into this anaesthetised device sooner rather than later...I may as well work my way through the whole lot rather than using a trial and error method that might take a long time.
View 3 Replies View RelatedI have a system which installed some boot files (i.e. Boot manager, Memory Tester and Windows Legacy OS loader) on the lowest numbered drive D: (the rest of course on C: which is the RAID partition where I want everything). I now know I should have disconnected the "D:" drive when I set the RAID up.
Anyone know of a sure-fire way of moving these files over without risk from D: to C: and then I can demote D: and remove the drive?
I have an Advent Roma 2001 configured, in PC World style, with a "recovery partition" alongside the system partition and, after resolving a hard disk problem, I found that the machine would not start/boot Windows 7. clearly some necessary files are missing or corrupted, but the normal system recovery tools have not solved the problem(s). I'm familiar with the process for resurrecting XP, but not its counterpart for Windows 7...the files and steps for doing this are rather different. it would seem that pretty much everything else is in place on the hard disk, but certain recovery programs report "0" Windows installations when Win 7 is still in place where it was before the disk problem, e.g. it is available to be selected by the main recovery/startup program...this prog can "see" it, but can't access/boot it.
files, command line statements, etc. so that I can breathe some life into this anaesthetised device sooner rather than later...I may as well work my way through the whole lot rather than using a trial and error method...that might take a long time. however, I'm also happy to be advised on the approach if and where this unnecessary or inadvisable.
I have a WD hard drive that I have done a full partition on and will not repartition. I have a second drive that I probably can reinstall windows if need be. I have changed a lot with windows 7 I have added different themes, start orbs, explorer frames/navigation, and system icons. The problem is when my wife gets on it, she hates it. So I made a different user account so that it would be her own look and feel. However the icons and other things are changed in hers also. So my question is: is there a way to have each user load their own windows explorer.exe and other system3264 files for each user? Or is there a way that I can have it ask at the begging (much like choosing a user) which drive to boot from? She basically just uses regular standard windows, and I use mine which looks like: [URL] So the start orb and other folders and file icons transfer to hers as well. I know that she would be happy if there was a way that we could each have different looks. Again I do not want to partition my drive to dual boot.
View 3 Replies View RelatedI am having a problem starting my PC! I have to start it in the boot menu under the RAID option. If I do not do this a message saying "Reboot and select proper boot device or insert boot media in selected boot device and press a key.." comes up, and just keeps popping up regardless of what I press! I would try using my boot disk but for the life of me I can't find it, and as windows 7 was already installed on this computer when we got it 3 year ago, I can't accurately recall if it came with one!I am no expert on BIOS, but I have read other problems similar to this one, and know that if I don't have the boot disk or the OS disk, I will need to know that at least.I am curious if the (Hard drive) is the issue. The BIOS tells me that anything in parentheses is disabled from corresponding type menu.
View 7 Replies View RelatedI recently received a new laptop. After starting after time with no problems I received a blue screen with Verticle black stripes then it shut off. After attempting to reboot it I receive this error in a black DOS like screen.
"Intel UNDI, PXE-2.1 (built 083)
Copyright (C) 1997-200 Intel Corporation
This Product is covered by one or more of the following patents:
US5,307459, US5,434,872, US5732,094, US6579,884, US6115,776 and
US6,327,625
Realtek PCIe FE Family Controller Series v120 (01/26/10)
PXE-M0F: ExitingPXEROM.
Reboot and select proper Boot device or Insert Boot Media in selected Boot device press a key"
i am facing problem while booting before Reboot and select proper boot device or insert boot media in selected boot devic this screen is coming
View 1 Replies View Related