i used win 7 and wanted to install xp as a multi-boot on my laptop for trying an xp based encyclopedia but when i installed xp i got error "ERROR LOADING OPERATING SYSTEM" so i reinstalled xp and realized that i cant see my 2 25 gb partitions full of data,so kindly guide me to get my partitions back i have currently reinstall win 7.
View 2 Replies
My computer has windows 7. I created a separate partition on my hard drive to install windows xp, but now when I try to install it I get an chkdsk /f error.
View 5 Replies View RelatedSo the other day I decided that I wanted to try dual-booting Ubuntu 10.04 on my HP Pavilion dv7-4083cl Entertainment Notebook that already had Windows 7 Home Premium 64bit installed. I shrank the main (biggest) partition by 100Gigs and then installed Ubuntu 10.04 on that 100Gigs of unallocated space. All worked fine, except when I tried to boot Windows 7 from the grub menu, it would come up to the beginning Windows 7 animation and then it would crash. So, I downloaded a Windows 7 Recovery CD and tried a few of the tools there. I did not create a system recover image prior to my troubles, so I could not recover the easy way.
After that, I tried the Startup Repair tool, which did not work. I read somewhere to try that Startup Repair tool 2 or 3 times, which I did. The third time, it seemed to freeze; it was "working" for about 6 hours, at which point I decided that it was enough and shut down the PC. That was a mistake... From that point forward, I still could not boot into Windows, but also every time I tried to boot into Ubuntu, I had to perform a disk check, which always failed! After trying that a few times, I had had enough yet again and decided to just reinstall Ubuntu. The install seemed to work fine, but once I rebooted I could not boot into Ubuntu (or Windows 7). No matter what option I select from the grub menu (or if I push F11 to go into recovery partition), it gives me an error that says "Error: No such partition" and dumps me into a grub rescue prompt...
After releasing multiple bouts of turrets, I tried booting from my Ubuntu LiveUSB again (same one I installed Ubuntu with twice) and ran Gparted to look at my partitions. It only showed me the one 100Gig partition and said the remaining ~350Gigs were unallocated! So now I'm stuck with no bootable operating system (on my HD), and to top it off, HP just sent me their "official" recovery disks that are trying to reformat my HD and erase all my data...
I know there has to be a way to restore my partitions and replace the grub bootloader with the Windows 7 bootloader. At this point I don't care about Ubuntu at all. All of my data was on the Windows 7 partition (which I cannot access from Ubuntu to grab it).
I can provide any information that you need, but remember that I can only do so via either BIOS or by booting Ubuntu from the LiveUSB. I cannot access Windows 7. I also do not have a Windows 7 install disk as this was a refurbished HP laptop that I bought from Costco...
I'm a long-time reader but new poster. I am currently running Windows 7. I want to install Windows XP onto another disc and have a dual-boot setup. I keep Windows 7 up to date and secure, but for the XP partition, I would rather not have antivirus running or even installed, in order to limit background processes. I will not be logging into any place or making any credit card purchases when booted into Windows XP. It will just be used for surfing, games, etc. Further, if and when XP becomes compromised or buggy, I will simply overwrite the partition with a backup image.
If I use Bitlocker to lock down the Windows 7 partition (with the encryption key on a thumb drive) and boot into Windows XP, am I correct in thinking the XP installation see or can't access the Windows 7 partition? If XP gets compromised, can a virus access or write to the Windows 7 partition?
Is there any other reason why this would not be secure? Can a virus write to the BIOS?
The problem I'm having is that I had been running WinXP SP3, I used GParted to partition my hdd so I could do a clean install and try out windows 7. The odd thing is though, at first when it would boot up I'd have two option to select from, either "Windows 7" or "Select an older version of windows", then I reinstalled windows 7 at one point(to the same partition used before) and lost that menu all together, now whenever I turn my PC on it just acts like windows 7 is the only OS installed.
I know my other partition is still there though, my question is, how would I go about retrieving it if possible. Can I just pop in my WinXP disc and do a repair or recovery on the other partition? Never had this problem dual booting windows and linux so im unsure as to what I should do.
MSI Wind 210 Netbook, 250 gig hd, vista (came with it) then upgraded to Windows 7 (2nd boot option)I deleted the dual boot menu using partition doctor (dumb mistake, dont ask) now all that shows up when I goto boot is,bootmgr is missing,press any key to restart,pressing a key.intel undii, pxe-2.1 (build 082)reboot and select proper boot device,thats it,It came with restore via the f3 key option on boot , but that shows nothing
View 9 Replies View RelatedOk, i have windows 7 already installed fine on my 2x raptor raided drives, i decided to install xp 32 on a new partition on the 2x raided raptors, after using nlite to integrate my raid drivers into the new xp iso (no floppy) it installed fine on the new partition.
However, i saw no boot menu on reboot and every time xp would load by default with f8 showing no other OS to boot. I then ran the windows 7 64 dvd and attempted a repair of startup option, it failed 5 times in a row quoting a corrupt boot sector.
I was all ready to give up when suddenly it just repaired it after the 6th attempt, i did nothing different but it said to reboot so i did and to my incredible relief my win 7 install started booting again.
But again, no boot menu and this time the xp boot has been lost! Is there any way i can manually add something to get a dual boot function running?
I have lost the ability to dual boot after installing windows XP.
I Originally had windows XP. I partitioned the drive in order to install windows 7. Installed windows 7 fine, no problems, was able to dual boot. After getting data from XP partition. I decided to do a clean install of xp. After doing that my machine only boots into XP, I no longer have the dual boot option.
I have tried booting off the windows 7 dvd and 'repair computer'. It said it found some problems and fixed them. Rebooted, still only booted into XP. Tried booting off DVD again ran 'Startup Repair option' Again, said it fixed some things, still only boots into XP.
I also tried EasyBCD and it said it fixed the problems, but everything is still the same. I can only boot into windows xp. No dual boot.
My boot.ini, ntldr and ntdetect are all on partition that has windows 7 installed.
Saw the posts about Vistabootpro but wanted to make sure i went that route before i purchased it and wanted to make sure of the correct steps to follow.
So I just got my hands on Windows 7 and wanted to play around with it, and everything works but:
Previous Computer Setup:
I had a dual boot with XP and Vista that worked perfectly (both OS's were on separate HD's and worked / booted correctly.)
Drive C: --------> Vista (Now Windows 7)
Drive D: --------> Windows XP
Problem:
After upgrading my Vista to Windows 7 (Via clean install) I lost my boot menu to choose XP. Now everytime I flip the power it boots DIRECTLY into Windows 7.
How do I recover my boot screen option so I can boot back into XP when I need to?
When my computer wouldn't turn on in the morning I did the usual diagnostics; unplug things one at time test with spare components etc... Any way I qucikly figured out the PSU was dead so I ordered a new one and was back up and running. However when I reassembled the computer after unplugging everything (and removing the m/b) I plugged the HDDs back into different SATA ports from which they orginally came. When I came to boot the computer up I got the error message: 'BOOTMGR missing' or it may have been 'NTLDR missing' I can't remember.
I fixed this problem by using the 7 startup repair utility. I have no problem booting into Windows 7, but I have lost the option to boot into my XP install on anther disk. I looked in the boot tab under System Configuration and the only OS showing is this Windows 7 install. So my question is this: how can I get the choice of which OS to boot back?
(I should mention that the XP install is on a different disk from the 7 install).
I just installed windows 7 ultimate on my pc.
i already had xp32 and vista 64 business on a dual boot on the same HDD before installing windows 7.
during windows 7 install, I selected the xp32 partition, formatted it and installed windows 7 over the top as I no longer wanted xp32.
When the windows 7 install was complete I expected to see a dual boot screen with
option 1. windows 7
and option 2. vista64
unfortunatelty i have no dual boot options, the pc now just goes straight into windows 7. It doesnt sem to know that vista is there.
i would appreciate assistance in getting a dual boot set up with vista64 and windows 7
I had Windows 7 and Xubuntu set up in dual boot by EasyBCD, a well known utility.Today the linux kernel has been updated and, after the following reboot, the choice of Xubuntu OS at the dual boot prompt didn't work.So I went through Windows, launched EasyBCD to fix things and:
- changed the order the entries (Win 7 up, first)
- selected Windows 7 as default OS
- removed Xubuntu entry
- added again Xubuntu entry through EasyBCD procedure
- saved (maybe I should have saved after each of the changes)
When I rebooted I've found that two identical Xubuntu entries, each pointing to the Linux OS, and no Win 7.I've tried to access Win 7 by Grub, but it points to the dual boot screen, so I'm at start point again.I don't have the Win 7 disk but the usual recovery partition. No backup. Going through the recovery partition gets me back to the dual boot screen..Is there any way to put it in order again? Could you suggestions work in this case?I know that, from Linux, I can install and overwrite MBR with free mbr.bin
sudo apt-get install syslinux
sudo dd if=/usr/lib/syslinux/mbr.bin of=/dev/sda
But I'm not sure it will give me back Windows 7.
I have messed up my dual boot of XP Pro and Seven
Seven was working well, but XP was playing up.
I did a restore from an earlier acronis image of XP.
XP now works again, but as you have guessed I have lost the dual boot menu to select Windows 7 when I bootup.
I know boot.ini does not apply with Seven.
Please tell me how to get my neatly tweaked Seven back on the boot menu,
I was trying to restore my Toshiba Sattelite L645-S4056 to factory default and reinstall windows 7 by inbuilt recovery system. While i was formatting the computer swtiched off itself. Then i couldnot access inbuilt recovery during booting. The computer wont boot with any windwos cd. It said something like "Cannot boot.Enter a bootable disc". I then installed a linux distero by booting with a USB device.The linux system works fine but i need windows 7. It shows that my hardisk is totally empty. There is no reserved part previously occupied by recovery system.I didn't get a recovery disc with my laptop. Any other dvd wont boot. How can i install back my Windows 7? What is wrong with the system? Is there any way to get windows 7 back?
View 3 Replies View RelatedI have two questions:
I am running Windows 7 dualbooted with WinXP, everything works fine. I want to get rid of the XP partition, and keep the Windows 7 one only, but there is a problem. THe partition on which XP is installed is set as system and active. I've googled around but I've found no easy solutions to this. Any ideas on how to do this without reinstalling the OS?
My second question would be about the Windows 7 update: I installed the 7100 build, when it got released, but as I saw now, the latest builds are like 7200+. Are the changes updated on my build somehow, or I would have to reinstall to have the new build?
I installed opensuse 12.1 on dual boot along with my other windows 7 installation. Installation of opensuse is successful and i can use it. But when I tried to use windows 7 on grub, it says bootmgr is missing. I've already encountered this problem a long time ago so i tried to use bootrec /fixmbr, bootrec /rebuildbcd and bootrec /fixboot in the recovery console in the windows 7 DVD. Rebuildbcd and fixboot did not work and it said something like it cannot find my windows installation. I also tried bootrec /scanos, it returned a windows installation on D:\Windows but my windows is in drive C. I think this has something to do with me messing up the active partition in disk management a month ago but i already fixed it by setting the active partition to the system reserved partition. Only fixmbr is successful, but now i can't boot on any OS because it says: Missing operating system.I also tried bcdboot C:\Windows but it failed with a message that goes like: Failure when attempting to copy boot information..
View 2 Replies View RelatedI can't get Win 7 to boot after setting up dual boot (Ubuntu 10.10) on my GF's laptop. I'll describe the problem and everything that has been tried so far. REALLY hoping somebody has an idea, I'm getting desperate.I installed Ubuntu last night via the Live CD. Used the Live version to install alongside Windows and partition the drive, install Grub, etc. At reboot, after POST it would just go to a black screen with a flashing cursor. I could only run off the live CD. A forum member determined the Grub was trying to load from the wrong partition. We changed that and voila! Grub now loads properly. I can boot into Ubunto via Grub with zero problems. HOWEVER: when I try to boot into Win 7 from Grub, it just locks at the same flashing cursor of death screen. The 7 partition is till intact, I can see and access all the files on the 7 partition from within Ubuntu, however 7 will not boot. I have tried downloading and burning the Win 7 repair disk and doing all of the following,Running the automatic Start Up Repair - several times. All it does is remove Grub, but booting still goes to the flashing cursor and I have to reinstall Grub again to be able to do anything after POST.I have used the command prompt to run "bootsect /nt60 SYS /mbr". Has the same effect as above.I have used all the bootsec.exe /fixmbr, /fixboot, and /rebuildBCD commands. Again, all have the same effect and I have to reinstall Grub to get anywhere.I don't have an installation disk to try and just do a repair install because Asus apparently doesn't feel that I would need one of these. All I have is the recovery disks from the Asus AIRecovery application that want to just re-format the entire drive and start over. This isn't an option. It's my GF's laptop (mine gave up the ghost last week) and we both have WAY too much highly important data on here. Not to mention she would castrate me . Now from all my research the only other thing I've come across that sounds possible is that the boot flag needs to be set to a different partition. Somebody had a somewhat similar problem and it turned out the way Dell set up the system the boot flag had to be moved to a recovery partition and it worked fine. I'm wondering if Asus has something similar going on, but I can't figure out how to move the boot flag. I'm going on 12 straight hours of working on this now
View 9 Replies View RelatedThis tutorial describes how to install Windows XP and Windows 7 on the same partition (first tutorial for one partition written).The short concept: Install XP twice and have 7 replace the first installation.Need more testers to confirm it works for everyone and the instructions are clear enough.Requirements: Both Installation discsA Windows XP LiveCD (might work with other OS, but no guarantees)EasyBCD.Install Windows XP normally if you're not already running it.Don't bother installing any drivers or software on it.Start another installation of Windows XP. Choose the same hard drive and leave it unchanged without formatting. When it asks you what to do then choose to install in a different directory "C:Windows.xp".Finish installing that one and only the necessary drivers.afterwards.Install Windows 7 on C: over the regular C:windows. A warning will tell you that it will move the old files to "Windows.old" directory. The good thing is it doesn't touch the Windows.xp directory.Install and run EasyBCD. Go to "Add/Remove Entries" and add an entry of "Windows NT/2k/XP/2k3" type and a name of your choice. (as shown in the attached image)Don't forget the "Save" button.You may also want to adjust the loader timeout from "Change Settings".In C: you will find a (hidden) file "boot.saved". Open it, remove the entry to the "WINDOWS" directory and make the "WINDOWS.XP" your default one (if it's not) and save as boot.ini".Restart and boot from the Windows XP LiveCD (which you should have burned and tested on CD or DVD before starting).Open the Command Prompt (Run "cmd") and enter the following lines in order
[code]...
I installed Win7 on the same Partition as WinXP. I was in a hurry and forgot totally to partition the HD before I installed, was doing 100 things on the side during the Installation, and noticed my mistake only after the install was complete. Is there any way I can do a Multi boot for those two OS now? The WinXP folder has been renamed to Windows.old, and even with EasyBCD there's no way I can get the Comp to boot into WinXP.
View 2 Replies View RelatedI built this machine using a caviar green HD and loaded Windows 7 64. It seemed pretty slow, so soon after I added a 128GB SSD and loaded Win 7 64. On start up I got the dual boot option and would just select the SSD as the main OS drive.I got tired of the dual boot option and foolishly formatted the OS partition on the Caviar.I has assumed with on OS on the caviar it would default to the SSD. Dumb me.I can rectify this with out reloading Win on the SSD. I finally got all my applications set up right.
View 5 Replies View RelatedI have a dual-boot of Windows 7 32-bit and 64-bit on separate partitions. I want to replace the Windows 7 32-bit partition with Windows XP and keep the Windows 7 64-bit partition. What's the easiest way to do this?
View 4 Replies View RelatedIn a dual boot system with 2 hard drives, one for Vista and one for Win 7, do both OS partitions need to be "Active & Boot & System"?
View 7 Replies View RelatedI'm currently running Windows 7 and I'm trying to partition my hard drive so I can dual boot Mac os x Leopard. I have 133 GB free on my 230 GB internal hard drive, but when I partition the drive the computer will only let me open about 5 GB of space. I have defragged the drive and nothing changed.
I am new to dual booting and I am really only doing this as an experiment. If anyone can give me any advice as to how I can partition more space or how much is needed I would be very grateful.
I installed DOS into 2GB FAT 16, then installed Windows 7 Ultimate expecting Windows 7 to install itself in a partition with a drive letter other than C (just as XP had done in a previous dual-boot setting with DOS) But no, Windows 7 has hijacked the C drive letter for itself. How can I stop Windows 7 from "stealing" from DOS, the drive letter C, for itself?
View 5 Replies View RelatedI've just installed Windows 7 64-bit on my desktop PC as it worked so well for the past month on my laptop I shrunk my Vista 64 partition and installed Win 7 x64 build 7000 on the new partition. All went smooth and well!
As I wanted to transfer some files and settings from my Vista install to my new Windows 7 I assigned a drive letter to my hidden Vista drive in the "Disk Management" utility and went on with my business. Now, as I'm done I'd like to hide my Vista partition again but I can't get it to work
When I select my Vista partition and select the "Change Drive Letter and Paths" and then press the "Remove" button I get the following error box:
"Windows cannot remove the drive letter of your volume. This may happen if your volume is a system or boot volume, or has page files."
My Vista volume is the first volume of the physical drive, the boot files is there but I don't have any page file on it. How come this drive could be hidden and revealed in the first place but not hidden again?
I made a dual boot system about a month and a half ago and I now no longer have need of Windows XP. Windows 7 is my primary OS, so how do I go about removing the XP partition?
View 6 Replies View RelatedHope someone here can point me in the right direction. I currently have a dual boot machine. Win7 and Vista. I bought the machine with Vista and shortly after 7 came out. So I installed 7 and never looked back at Vista. I want to delete the Vista partition so I can regain space on the drive but it wont let me. It's an active primary partition. Even though I am logged into 7 it says that I can't delete a primary partition.
View 2 Replies View RelatedI would like to make my PC dual-boot with Windows 7 Home Premium 64bit version & Linux Ubuntu. I know about Wubi to install Ubuntu within Windows, But would like more space than the 30gb limit that Wubi uses. How do I create an partition with Windows that can be used for a dual-boot. doctorwhovian11-24144041650249291689021989539000 has chosen the best answer to his/her question. Click here to view the answer that was selected.
View 5 Replies View RelatedI'm wanting to install Windows 7 as a dual boot alongside my existing XP set up and have been trying to follow the excellent guide at Dual Boot Installation with Windows 7 and XP
But I'm stuck at resizing the existing partition as described at Partition or Volume - Shrink
I get as far as the command prompt and selecting the drive, but as soon as I type "shrink querymax" or "shrink desired=15360" or even just "shrink" I get the message
"Diskpart has encountered an error: This service cannot be started in safe mode"
Now I can't see any way of getting a command prompt WITHOUT starting in safe mode.
Can i format the primary partition in a dual booted system that is xp and windows 7 where xp is the primary partiyion. And would the other os still work
View 1 Replies View RelatedI have read that using a computer specifically for financial transactions with known and trusted entities (such as a bank) is a good way to reduce (though not eliminate) the risk of your accounts being hacked by reducing the likelihood of inadvertently installing a malware, spyware, or virus by reducing internet sites visited. Assuming this is correct, I was wondering about dual booting one computer with two physical hard drives (each with its own OS) versus one hard drive with two partitions. I figure the former would be "more secure" since one drive would be isolated from any unwanted programs. However, since they shared a few things (motherboard and such), is this set up as "secure" as having two computers? If so, how does one go about setting up a dual boot with two separate hard drives of the same operating system using one computer?
View 5 Replies View Related
