Resizing Partition To Install Dual Boot?
Sep 11, 2010
I'm wanting to install Windows 7 as a dual boot alongside my existing XP set up and have been trying to follow the excellent guide at Dual Boot Installation with Windows 7 and XP
But I'm stuck at resizing the existing partition as described at Partition or Volume - Shrink
I get as far as the command prompt and selecting the drive, but as soon as I type "shrink querymax" or "shrink desired=15360" or even just "shrink" I get the message
"Diskpart has encountered an error: This service cannot be started in safe mode"
Now I can't see any way of getting a command prompt WITHOUT starting in safe mode.
View 8 Replies
ADVERTISEMENT
Jun 10, 2009
I installed windows seven beta a few weeks ago. I made the partition too small at the time and just recently used a live ubuntu cd's partition editor to add more space to the windows seven partition.
When I booted into vista it automatically check the drive and restarted with no problems.
When I attempted to boot into seven it gave me an error screen saying I need to reinstall my O.S.
I have lost my cd for the beta build. Is their anyway I could get a copy of the iso from Microsoft again? Or would it be easier to upgrade to the release candidate? Or can I posiblely repair without the cd (when I try to acess the extra features of f8 on the boot screen I get the same error as trying to load the os)?
View 5 Replies
View Related
Nov 18, 2011
I had an empty 70 GB partition on the left of my computer and a 230 GB on the right side but I wanted to combine them. Windows was on the 230 GB partition. I booted GParted and combined them, it copied everything from the 230 GB partition over and resized it, it took a few hours.I assumed after it wouldn't boot and all I would have to do is pop in my Windows 7 install disc and go through the repair setup. At first I ran startup repair and it would say it found a problem, and I rebooted and still nothing.. After the bios loads and it lists my DVD drives I just get a cursor _ blinking, nothing else.. No BOOTMGR missing.Odd I thought, so I ran repair again, and again it found another problem. I did this several times before it said it could not detect a problem but it still would do the same thing.I opened the cmd prompt and issued the following commands
bootrec /fixmbr
bootrec /fixboot
bootrec /rebuildocd
I tried installing a second copy of Windows 7 on a 10 GB partition on the end, it went successfully but still blinking cursor. Theres a 54 MB partition at the beginning of type Primary, the main windows one is System and the test windows 7 partition is Primary as well. I thought the first one was usually 100 MB but maybe I am wrong.Still I am stuck with a blinking cursor?
View 9 Replies
View Related
Aug 29, 2012
I'm a long-time reader but new poster. I am currently running Windows 7. I want to install Windows XP onto another disc and have a dual-boot setup. I keep Windows 7 up to date and secure, but for the XP partition, I would rather not have antivirus running or even installed, in order to limit background processes. I will not be logging into any place or making any credit card purchases when booted into Windows XP. It will just be used for surfing, games, etc. Further, if and when XP becomes compromised or buggy, I will simply overwrite the partition with a backup image.
If I use Bitlocker to lock down the Windows 7 partition (with the encryption key on a thumb drive) and boot into Windows XP, am I correct in thinking the XP installation see or can't access the Windows 7 partition? If XP gets compromised, can a virus access or write to the Windows 7 partition?
Is there any other reason why this would not be secure? Can a virus write to the BIOS?
View 4 Replies
View Related
Sep 27, 2010
I've 4 primary partitions on my drive. I've resized the system partition (win 7) and the second one with gparted. No problem with the first but the second is gone. Disk management shows it but no way to format or change the drive letter.
View 6 Replies
View Related
May 7, 2011
I have a System partition which is running out of space. Using GParted I took 1GB from the Data partition and made it unallocated. Now, how do I add that to the System partition?
View 6 Replies
View Related
Dec 13, 2009
I want to shrink my C partition with Windows 7 installed, but Windows 7 partition manager wont shrink it past 200GB because of unmovable files. I dont know what files those are though.
If I use Partition Wizard to shrink the size to 100GB, is it safe to resize when there are unmovable files? Will this damage my system?
Why can a third party program shrink the partition, but Windows cant?
View 6 Replies
View Related
Mar 3, 2012
I was going to partition my hdd it had 72gb free and it has 160gb so i partitioning the hard drive (i used partition wizard) i always use that program.After it finished it reboot then it got stuck at bios it would not load any cd or dvd it will just hang there.There it says two options "Press F1 to run setup" i press it and says "Entering Setup..." and nothing happens and "Press ESC for BBS POPUP menu i press it and says "Boot selection popup menu has been selected"This is what the screen says:
AMIBIOS(C) American Megatrends, Inc.
BIOS Date: 02/02/05 13:04:54 Ver: 08.00.10
Copyright 2005 by Hewlett-Packard Company
[code].....
I was trying to resize my partition but it just stopped and got stuck at "Ultra DMA Mode-5, S.M.A.R.T. Capable and Status OK". As i mentioned above I tried to boot of a cd/dvd but it wouldnt work i have 2 other hard drives and the work perfect.
View 9 Replies
View Related
Jun 27, 2009
I have two questions:
I am running Windows 7 dualbooted with WinXP, everything works fine. I want to get rid of the XP partition, and keep the Windows 7 one only, but there is a problem. THe partition on which XP is installed is set as system and active. I've googled around but I've found no easy solutions to this. Any ideas on how to do this without reinstalling the OS?
My second question would be about the Windows 7 update: I installed the 7100 build, when it got released, but as I saw now, the latest builds are like 7200+. Are the changes updated on my build somehow, or I would have to reinstall to have the new build?
View 9 Replies
View Related
Nov 12, 2009
This tutorial describes how to install Windows XP and Windows 7 on the same partition (first tutorial for one partition written).The short concept: Install XP twice and have 7 replace the first installation.Need more testers to confirm it works for everyone and the instructions are clear enough.Requirements: Both Installation discsA Windows XP LiveCD (might work with other OS, but no guarantees)EasyBCD.Install Windows XP normally if you're not already running it.Don't bother installing any drivers or software on it.Start another installation of Windows XP. Choose the same hard drive and leave it unchanged without formatting. When it asks you what to do then choose to install in a different directory "C:Windows.xp".Finish installing that one and only the necessary drivers.afterwards.Install Windows 7 on C: over the regular C:windows. A warning will tell you that it will move the old files to "Windows.old" directory. The good thing is it doesn't touch the Windows.xp directory.Install and run EasyBCD. Go to "Add/Remove Entries" and add an entry of "Windows NT/2k/XP/2k3" type and a name of your choice. (as shown in the attached image)Don't forget the "Save" button.You may also want to adjust the loader timeout from "Change Settings".In C: you will find a (hidden) file "boot.saved". Open it, remove the entry to the "WINDOWS" directory and make the "WINDOWS.XP" your default one (if it's not) and save as boot.ini".Restart and boot from the Windows XP LiveCD (which you should have burned and tested on CD or DVD before starting).Open the Command Prompt (Run "cmd") and enter the following lines in order
[code]...
View 9 Replies
View Related
Jan 10, 2012
I installed Win7 on the same Partition as WinXP. I was in a hurry and forgot totally to partition the HD before I installed, was doing 100 things on the side during the Installation, and noticed my mistake only after the install was complete. Is there any way I can do a Multi boot for those two OS now? The WinXP folder has been renamed to Windows.old, and even with EasyBCD there's no way I can get the Comp to boot into WinXP.
View 2 Replies
View Related
Oct 26, 2010
I built this machine using a caviar green HD and loaded Windows 7 64. It seemed pretty slow, so soon after I added a 128GB SSD and loaded Win 7 64. On start up I got the dual boot option and would just select the SSD as the main OS drive.I got tired of the dual boot option and foolishly formatted the OS partition on the Caviar.I has assumed with on OS on the caviar it would default to the SSD. Dumb me.I can rectify this with out reloading Win on the SSD. I finally got all my applications set up right.
View 5 Replies
View Related
Jun 12, 2009
I have a dual-boot of Windows 7 32-bit and 64-bit on separate partitions. I want to replace the Windows 7 32-bit partition with Windows XP and keep the Windows 7 64-bit partition. What's the easiest way to do this?
View 4 Replies
View Related
Feb 12, 2011
In a dual boot system with 2 hard drives, one for Vista and one for Win 7, do both OS partitions need to be "Active & Boot & System"?
View 7 Replies
View Related
Jul 12, 2009
I'm currently running Windows 7 and I'm trying to partition my hard drive so I can dual boot Mac os x Leopard. I have 133 GB free on my 230 GB internal hard drive, but when I partition the drive the computer will only let me open about 5 GB of space. I have defragged the drive and nothing changed.
I am new to dual booting and I am really only doing this as an experiment. If anyone can give me any advice as to how I can partition more space or how much is needed I would be very grateful.
View 4 Replies
View Related
Jan 9, 2012
I installed DOS into 2GB FAT 16, then installed Windows 7 Ultimate expecting Windows 7 to install itself in a partition with a drive letter other than C (just as XP had done in a previous dual-boot setting with DOS) But no, Windows 7 has hijacked the C drive letter for itself. How can I stop Windows 7 from "stealing" from DOS, the drive letter C, for itself?
View 5 Replies
View Related
Jan 16, 2009
I've just installed Windows 7 64-bit on my desktop PC as it worked so well for the past month on my laptop I shrunk my Vista 64 partition and installed Win 7 x64 build 7000 on the new partition. All went smooth and well!
As I wanted to transfer some files and settings from my Vista install to my new Windows 7 I assigned a drive letter to my hidden Vista drive in the "Disk Management" utility and went on with my business. Now, as I'm done I'd like to hide my Vista partition again but I can't get it to work
When I select my Vista partition and select the "Change Drive Letter and Paths" and then press the "Remove" button I get the following error box:
"Windows cannot remove the drive letter of your volume. This may happen if your volume is a system or boot volume, or has page files."
My Vista volume is the first volume of the physical drive, the boot files is there but I don't have any page file on it. How come this drive could be hidden and revealed in the first place but not hidden again?
View 2 Replies
View Related
Dec 22, 2009
I made a dual boot system about a month and a half ago and I now no longer have need of Windows XP. Windows 7 is my primary OS, so how do I go about removing the XP partition?
View 6 Replies
View Related
May 10, 2011
Hope someone here can point me in the right direction. I currently have a dual boot machine. Win7 and Vista. I bought the machine with Vista and shortly after 7 came out. So I installed 7 and never looked back at Vista. I want to delete the Vista partition so I can regain space on the drive but it wont let me. It's an active primary partition. Even though I am logged into 7 it says that I can't delete a primary partition.
View 2 Replies
View Related
Jun 23, 2011
I would like to make my PC dual-boot with Windows 7 Home Premium 64bit version & Linux Ubuntu. I know about Wubi to install Ubuntu within Windows, But would like more space than the 30gb limit that Wubi uses. How do I create an partition with Windows that can be used for a dual-boot. doctorwhovian11-24144041650249291689021989539000 has chosen the best answer to his/her question. Click here to view the answer that was selected.
View 5 Replies
View Related
Sep 26, 2010
Can i format the primary partition in a dual booted system that is xp and windows 7 where xp is the primary partiyion. And would the other os still work
View 1 Replies
View Related
Sep 22, 2012
I have read that using a computer specifically for financial transactions with known and trusted entities (such as a bank) is a good way to reduce (though not eliminate) the risk of your accounts being hacked by reducing the likelihood of inadvertently installing a malware, spyware, or virus by reducing internet sites visited. Assuming this is correct, I was wondering about dual booting one computer with two physical hard drives (each with its own OS) versus one hard drive with two partitions. I figure the former would be "more secure" since one drive would be isolated from any unwanted programs. However, since they shared a few things (motherboard and such), is this set up as "secure" as having two computers? If so, how does one go about setting up a dual boot with two separate hard drives of the same operating system using one computer?
View 5 Replies
View Related
Nov 25, 2009
I am having a problem that seems more like a Win XP problem, but since its part of my migration to Windows 7 and many people these days may be trying the same.
As I said, I am in the progress of migrating to Windows 7. As a transient solution until I have transferred and re-installed everything under Windows 7 I want to have a dual boot capability, i.e. I bought me a larger HD, created two partitions on it, installed Windows 7 on the first partition, and then I used a disk-imager (Acronis Disk Director) to copy my entire old XP disk 1:1 to the second partition of the new HD. I then set things up so I can choose between the two partitions using the Windows 7 boot manager. After some fiddling the choosing and booting in principle works fine.
BUT, when I try to start WinXP, I have the very strange effect, that the system at first boots and starts WinXP up fine up to the point where it presents the login screen. When I then enter my name and password my credentials at first seem to be accepted, i.e. I get a "Loading your settings..." dialog but to my dismay only seconds later that dialog always turns into "Logging off..." (???!@#@$&!) at which point the system hangs for some long period. If I wait long enough (~5 minutes) it eventually returns to the login screen again. I also tried to login as Administator but that failed as well (the error message mumbled something about no domain server to verify my id which is complete nonsense, since my XP system was never part of any domain, so there is no server in the world that could verify anything here!).
Any idea what could cause this and why can't I not log into that copied/moved 1:1 Window XP installation? Any hints/suggestions/pointers would be highly welcome!
View 4 Replies
View Related
Dec 8, 2009
I have a small query about this whole partitioning business. I'm trying to set up a partition so I can dual-boot Windows 7 and Ubuntu.
My computer came with a Dell Recovery partition and an OEM partition as well as the main C: drive, which are all primaries. I've created a new logical drive, which I've called Z:, with the idea being to install the Linux OS in that chunk of the drive.
My first question: First up, I've formatted it as "exFAT" - is this the same as FAT32?
Next question: can I divide this 'Z' into smaller chunks with different formats, or do they all have to be the same format? I was hoping to be able to format a small bit of the drive into a Linux file-system so that both OSs can be kept entirely separate from each other, but leave the bulk of it as FAT so that I can see my files with both OSs. If this is not possible, what would be the best way to achieve the desired result?
View 1 Replies
View Related
Dec 15, 2009
My boot drive is a 120Gb Samsung spinpoint, previously one whole partition containing XP. This XP wasnt a clean install, it was an upgrade to Windows 98 I think, and this may be the problem. I have a number of other hard disks, 1 PATA and 2 SATA, which I am using for video editing stuff.
I downloaded GParted, shrunk the XP partition to 76Gb and created a new 35Gb partition for Windows 7. A bit small, but I figured once everything was tested out, I could grow out the Windows 7 partition.
This was successful, and I inserted the Windows 7 disk...selected custom install, and installed to my newly created partition.
Windows 7 did its reboots and I filled in the usual bunff to create basic accounts, etc.
Then I rebooted, and was a bit surprised I did not get the dual-boot menu, it went straight into Windows 7. Using F5 and F8 did not provide any further options, specifically the 'Previous version of Windows' one.
Going into Windows 7 Disk manager, i could see the partition was still there. I read other posts of what Windows 7 does (belately) and yes, it had 'hidden' the XP partition. I gave it a drive letter (D, but Windows 7 saw it as an empty disk!
I downloaded EasyBCD, and it showed only one entry in the bootloader. I tried to add a new entry, using type:"Windows NT/2k/XP/2k3", but the Drive was greyed out; if I selected "Vista/Longhorn" I could then change the drive to D: and then change type back to XP (odd). I then clicked 'Add Entry', but it came back with an error message "EasyBCD could not locate a copy of NTLDR on your hard drive. Please download a copy of NTLDR and NTDETECT.COM from Htpp://(blah blah) and copy them to the drive D: in order for your newly-created entry to work.".
Does this mean my XP partition is truly trashed? Is there a way to get back my XP partition?
I am thinking of maybe inserting the XP disk and repairing, maybe it will detect XP and fix it, but if it will blow away both my installations, I might not bother.
Last resort is to use File Scavenger on the dead partition, but when I checked it out in GParted again just now, it said that 3Gb out of the 76Gb had data, could it be that Windows 7 has just not recognised my original XP partition as an XP partition, thought it was its configuration partition, and just overwrote stuff?
View 5 Replies
View Related
Jun 22, 2010
I have a dual boot scenario currently on an Intel 80GB SSD, with one partition as XP Pro, and the other is Windows 7, split 20GB(XP)/50GB(7).
The XP partition needs to be upgraded to Windows 7 for my wife's work remote access, and it will also include Office 2010 Pro.
Will I run into any issues dual booting into the existing Windows 7 partition after the upgrade, or should I just reinstall our personal Windows 7 OS after the upgrade is installed?
I have other hard drives to use as well if space becomes an issue, but I'd like to keep the existing Windows 7 install without starting from scratch.
View 9 Replies
View Related
Aug 9, 2009
i used win 7 and wanted to install xp as a multi-boot on my laptop for trying an xp based encyclopedia but when i installed xp i got error "ERROR LOADING OPERATING SYSTEM" so i reinstalled xp and realized that i cant see my 2 25 gb partitions full of data,so kindly guide me to get my partitions back i have currently reinstall win 7.
View 2 Replies
View Related
Jul 28, 2011
I'm trying to install a new hard drive and retire my current one to backup and data storage purposes.
The problem is that I've installed Windows 7 on a hard drive with 2 partitions, an old XP partition (D:) and the new W7 partition (C:). At the moment the disk management screen looks like this:
What I am trying to do is delete the D: partition, and then copy/resize the C: partition including Windows 7 installation to my new hard drive (F:)
If I ignore the new hard drive and just try to migrate to a single partition, I can never get it to boot. I tried using Partition Wizard to set the C: as a primary, active partition, copied over the bootmgr and boot directory, then used bootrec /fixmbr and bootrec /fixboot to try to make Windows 7 bootable from just the C:, but it didn't work. All I got was "disk read error" whilst the PC was trying to boot off the C: (this is with all other drives disconnected...).
I could try to migrate to a single bootable partition from a 'dual boot' configuration?? I tried this video's advice and did everything as instructed but got the disk read error problem.
View 8 Replies
View Related
Mar 31, 2010
I have a laptop with twin HDDs and I have Vista on the C: partition on Drive 1. I created a new partition G: on Drive 2 and, while Vista was running, inserted the Win 7 disc and started installation to G:. All went perfectly and I have retained my original partitions with drive letters and labels, plus a new G: partition labeled Win 7. All seems to be working fine.Now I heard from a geeky friend that BOTH OS should be running on C: and that windows has some clever way of making that work. Is this true - and are there any disadvantages continuing installing MANY apps on G:?
View 3 Replies
View Related
Jun 10, 2009
im trying to dual boot windows 7 beside my already installed vista HP , when i try shrink my c partition with the inbuilt vista partition tool , to create room for the windows 7 partition , it will only allow me to shrink roughly 2000 MB of the drive even though there is 45% of a 250 GB drive still available .
they reccomend at least 16GB of free space to install it,
where am i going wrong , im a little confused ,
View 7 Replies
View Related
Jan 18, 2010
The only Problem I am having now is being able to format the partition with Vista still on it. For some reason I just can't get rid of it.
View 9 Replies
View Related
