I have an Advent Roma 2001 configured, in PC World style, with a "recovery partition" alongside the system partition and, after resolving a hard disk problem, I found that the machine would not start/boot Windows 7. clearly some necessary files are missing or corrupted, but the normal system recovery tools have not solved the problem(s). I'm familiar with the process for resurrecting XP, but not its counterpart for Windows 7 the files and steps for doing this are rather different. it would seem that pretty much everything else is in place on the hard disk, but certain recovery programs report "0" Windows installations when Win 7 is still in place where it was before the disk problem, e.g. it is available to be selected by the main recovery/startup program...this prog can "see" it, but can't access/boot it.I can breathe some life into this anaesthetised device sooner rather than later...I may as well work my way through the whole lot rather than using a trial and error method that might take a long time.
I have an Advent Roma 2001 configured, in PC World style, with a "recovery partition" alongside the system partition and, after resolving a hard disk problem, I found that the machine would not start/boot Windows 7. clearly some necessary files are missing or corrupted, but the normal system recovery tools have not solved the problem(s). I'm familiar with the process for resurrecting XP, but not its counterpart for Windows 7...the files and steps for doing this are rather different. it would seem that pretty much everything else is in place on the hard disk, but certain recovery programs report "0" Windows installations when Win 7 is still in place where it was before the disk problem, e.g. it is available to be selected by the main recovery/startup program...this prog can "see" it, but can't access/boot it.
files, command line statements, etc. so that I can breathe some life into this anaesthetised device sooner rather than later...I may as well work my way through the whole lot rather than using a trial and error method...that might take a long time. however, I'm also happy to be advised on the approach if and where this unnecessary or inadvisable.
So i bought Windows 7 Home Premium from the same store i got this at (Webhallen, pretty much swedens largest component retailer) to replace the standard Home edition (which i got with my "old" packard bell!).
I have 2 HDDs, one from the packard bell (1tb) and one i recieved from a friend, a 320gb seagate. I ran with both in my packard bell for a while, using the 320gb for the system. It ran without any problems.So, i boot the CD, go through the setup and format the 320GB. (I also formatted some reserved space for OEM files from the Packard bell harddrive since i won't be using the packard bell any time soon).I proceed with the installation.The copying of the files goes very quick and when it reaches the expanding of files it takes ages before it finally comes to the error:Windows cannot install required files. The file may be corrupt or missing. Make sure all files required for installation are available, and restart the installation. Error code: 0x80070017.Immedieatly i whipped up the laptop and googled it, trying the different "sollutions" to no avail, like simply trying to install again without rebooting, taking out a RAM stick and only running with one in the master slot, taking out all excess Harddrives etc etc. i also ran Memtest86, clean, no errors!
I tried install Ubuntu on it, but that didn't go well either. It loaded for ages and then i got a very strange horizontal black and white striped screen, the black stripes being jagged and pixelated.I found my old windows 7 home cd from my packard bell and tried installing with that one. Same result, Error code: 0x80070017.
have a Toshiba Satellite A505-S6980 Windows 7 Home Edition Premium Edition laptop. I recently tried to dual boot with Windows XP Professional service pack 3 iso cd. I partitioned my primary windows 7 drive and installed the windows xp on the smaller partition. The windows xp was working fine then I downloaded easybcd and tried to add XP to my OS choices menu, while logged on my XP partition, and then each time I try to load XP from now on I get a blank screen that says Windows could not start because the following file is missing or corrupt: [CODE]
I got an installation disk that actually has files on it and show up on my computer but I have a new problem now in which an error shows up saying that some of the neccesary files are not being found which is really unfortunate. The error code I am getting is:Ox80070017
I was getting notification bubbles in W7 about many of my .exe files being corrupt, including chrome.exe and a few other programs. The notifications recommended that I run Chkdsk, so I went to the C: properties and chose Disk Cleanup, or whatever Chkdsk is called in the menu, I forget at the moment. Well, when I did that, I got yet another notification, this time saying that Chkdsk.exe is corrupt, and recommending that I run Chkdsk (lol). Well, I apparently chose to schedule Chkdsk to run on next startup. But after I shut down to let it run I booted up and after my Dell screen I get....nothing.
Just a blinking horizontal bar, looks like that little input cursor flipped on its side, in the top left corner. I'm running Ubuntu 11.10 on a USB flash drive at the moment, what can I do from here? Until this happened I've never used a Linux OS before so I'm not very savvy with it yet, but when I view my partitions on here (500GB HDD) I see that 451GB is Unknown, in a partition manager there is a red flag notification saying that I have bad sectors, which I already knew. I've heard a lot about running a program called ntfsprogs, but I can't find it. Is there any way to recover my Windows 7 boot without losing any of my data on there?
My laptop advent won't boot. Start up repair wont work, even a system repair cd wont fully load. Only thing i can get to is launch repair your computer, and the only thing that works there is command prompt.
Tried fixboot & fixmbr... They worked but rebuildbcd never finishes.
I have an Acer Aspire one. It came with XP and I have it dual booting into Windows 7 which is working well which I installed from a USB Drive as this model doesnt have a CD Drive.
In the main boot screen it says "Earlier version of Windows" For XP and "Windows 7" for windows 7. All was working well until yesterday...
Now I can't boot into "Earlier version of Windows" i.e. XP. It gives me the C:\windows\system32\config\system is missing or corrupt message. I can boot into Windows 7 fine but all of my work stuff is on the XP platform (I know I can access the files from "7" but I need to get it operational again).
Any ideas? Can I do a repair from the USB Drive?..I've tried a couple of things to boot from the USB Drive but to no avail. And I can't find the BOOT.INI file from XP (I think it gets moved to Windows 7's hidden boot partition when I installed it. I cant seem to access that partition either).
I want to install Windows 7 home premium and got the ISO done with windows 7 usb download tool and unetbootin. When i try booting the USB i get "ntdlr is missing or corrupt press ctrl alt delete to restart"
I swiped the whole HD so there is no current partition on it. The usb is new and fat32 formatted with the 3GB windows 7 iso imgage on it..
Recently I installed Windows 7 x64 RTM on my 500gb, on my 320gb I had XP and build 7600 x32 running, I decided to format my 320gb as i was switching over x64 (formatted using windows 7 disc), The OS refused to boot claiming boot files were missing, after running startup repair a few times it was fixed.
Now when I try remove my 320gb it refuses to boot and claims boot files are missing, having a look at my 320gb in computer management I see it has a second partition called system reserved, which has bootmgr and other files in it, so it seems windows 7 installed on my 500gb but put all the boot info on my 320gb, how do i create a boot section/folder on my 500gb so I dont have to keep my 320gb in my pc?
I've just built my own computer with a friend and we installed windows 7 and it worked fine for 3 days. Then it started to not respond. Restarted the computer and it wouldn't start up again, came up with a bunch of errors. So I reformatted and it says "windowssystem32driverwdf0100.sdf is corrupt or missing." I've tried system repair but it won't work. It won't open command prompt or anything.
1. Same computer in my signature/specs except for the optical drive.
2. Hardware passes Windows 7 compatibility test.
3. The install DVD can be read properly. Creating an ISO image of it works perfectly. No read errors on the disk itself.
4. The optical drive is practically brand new, the cable is brand new, never had any I/O errors using this drive.
5. RAM passes MS memory testing 6 times. 0 errors.
6. Windows 7 Ultimate install fails at the same point, during file unpacking, 3 times. Says files are missing or corrupt.
The install disk was created at home from an ISO download, student licensed Windows 7 Ultimate, 32 bit but I don't think that really matters. See #3.Is there anything else left to look at? Any ideas why this won't work?
Recently installed Windows 7 64 bit on my main hdd (had previously had it installed as 32 bit). Now my back-up drive gives me this error. The back up drive does not have windows installed on it, and is not a boot drive. But when it is connected I get this message: "Windows root system32 ntoskrnl exe missing or corrupt." In order to boot on my main drive, I have to disconnect the back up drive.
I don't understand where to reinstall the missing file - if I put it in the Windows 7 files, won't that mess up my main drive?
I recently upgraded from WinXP x32 to Win7 Ultimate x64 and kept getting the:"Windows rootsystem32 toskrnl.exe is missing or corrupt" when attempting to boot.
My system:
CPU: Core2 Quad Q8300
Hard Drives:
Primary (System) = Western Digital 300GB 10,000rpm Secondary (Data) = Western Digital 1T-GB 7,200rpm
*External cloned CasperXP backups for BOTH on matching HDs -- However the backup Sys HD is still configured w/WinXP x32 until I can get all problems ironed out.
Problem Discovered:Upon booting the OS is pointing to the Secondary HD as Primary,however, once booted the C: drive is indeed the intended 300GB and Secondary is the 1T-GB HD.
How Discovered:I needed to relaunch the OLD XP system to access some old Firefox Bookmarks so replaced Sys HDs. Had to reconfigure boot sequence to get OLD x32 OS HD to boot (successful). Saved Bookmarks and shut down. Replaced the Old x32 Sys HD with the New x64 Win7 OS HD. Then got the above error repeatedly. Played with boot settings and BIOS settings for an hour before identifying that the x64 Win7 OS would ONLY boot with the Secondary Data HD listed as the Primary Boot Device. Do note that the OS files are all on the 300GB Primary even as the boot sequence points to the secondary HD.
QUESTION:Is it possible to correct this situation WITHOUT having to do a clean install of Win7 x64 with the 1T-GB Secondary Data Drive disconnected, in other words doing a clean install with ONLY the 300GB Primary connected?
when i turn on my acer laptop all it does is show a error massage saying windows could not start because bootvill.dll file is missing or corrupt. i dont have a cd-rom because it a notebook. i downloaded a regeristy cleaner to a flash drive but when i put it in the pc still goes to that error massage i also change the boot order to start from my flash drive but it still when back to the error screen . i used the alt + f10 that gotten me into the system restore it when half way done than whent back to the error screen anything else i can try?
I have recently setup a raid 0+1 array on a computer with 4 identical hard drives. I installed windows 7 and the installation without a hitch. However on the reboot a windows error message appears and says the following:
File: \Windows\system32\ntoskrnl.exe Status: 0xc0000221 Info: Windows failed to load because the kernel is missing, or corrupt.
I have tried many things in an attempt to resolve this issue. I have tried reinstalling, using a different DVD drive and removing the RAID array to no avail. I have also disconnected the hard drive which is not associated with the RAID array also to no avail.
I turned on my pc, and it would not let me get past start up, saying file : Windowssystem32 tkrnlpa.exe status : 0xc00000e9 Info: Windows failed to load because the kernel is missing or corrupt
I tried a few things, mostly the startup repair option that it would (recommend) to me next to the start windows normally option. this did absolutely nothing, and the problem continued. So I said ok, I give up, and decided to back up everything and completely reformat and reinstall windows. I did this, it installed successfully. I couldn't believe it...even after completely reformatting, I could not get past start up. The system repair option still does nothing, even with the disc in and I tried reinstalling it a bunch of times, but now it wont even do that correct all the way through, keeps coming up with errors talking about files either missing or corrupt. I wiped partitions and tried again alot of times, but nothing. Now it doesnt even recognize windows 7 as being installed at all. [URL]
installing Windows 7 on a virtual machine.I have 178MB RAM (which I know isn't enough), but it does the Starting Windows screen before the installation, but then it comes up with this error: File: windowssystem32configsystem Status: 0xc0000001 Info: Windows failed to load because the system registry file is missing, or corrupt.
I just built my first computer and was happy to turn it on. When I tried to install Windows 7 I received the error in the title. I had Windows XP on the computer before but formatted it all to two 80GB NFTS partitions. When I try to boot up the Windows 7 recovery disc(or XP for that matter), my moniter goes off, saying no signal(The Windows 7 install disc is the only disc that I've tried that actually boots). I am about to try booting the recovery console off of a USB. Is there anything else that might alleviate this problem? Everything is checked and works fine inside the case.And just to make sure, I have no operating system, so after the BIOS screen the moniter will say no signal anyway, with a disc in or not.
i have windows 7 Starter and bought the disk to upgarde it to windows professional, so i put dvd into dvd-unit... duh and after loading two white bars for secondary boot device it displays the hell message "winload is missing or corrupt..." i have already tried EVERYTHING on the forums and on the web including all the bootrec processes, rebuilt bcd, get a new copy of winload switching carpets, and modding BCD file to specify diferent routes for windows to search the file.. and yet nothing...I personally think the problem is that my C: drive it's partitioned in 3 one called system backup (wich is the standar recovery console for vaio, another partition of around 10 gb named System reserved and the free space where windows is located.
Administrador de arranque de Windows ---------------------------------- Identificador {bootmgr} device partition=C: description Windows Boot Manager locale en-us
My Acer laptop is suddenly having this issue and will not boot into windows in any mode including safe mode. I tried using a recovery disc with no luck. I can get to the command prompt from the recovery disc and I tried fixboot and fixmbr with no results.
I face issue with my acer 5738G. Its shows boot mgr missing or corrupt. System repair does not work. It shows unable to repair offline. While trying to install OS all over again it stuck in a blue screen with a message "starting setup ". I am blackout without my laptop.
Mp3 files on an external drive seemed to become unplayable after connecting the drive to a win 7 machine. the pc is not mine. a friend sent me some samples of the bad files and asked if i could play them or convert them to a playable form of some typeno luck at my end. the mp3 files were created on win 2000 and xp machines.
So I have a weird situation.A friend of mine has somehow bricked her computer. She is not the most computer savvy person and I have no idea how her computer got to this point, but the computer no longer recognizes her original windows installation. There is no way to upgrade or repair from the original installation as it does not appear. Her computer will not boot except from the installation disk. Her drives are visible in the command prompt. The windows folders and whatever are all there. There is approximately 7 gigs of stuff on her drive, but when you go to select the partition on which to install win 7, it shows it as being 100% empty. I tried installing it on that one first, it got through copying and expanding, immediately after reaching 100% expanded, when it tries to start the next phase, it throws me a corrupt installation files error. It appears to be different each time. So i created and reformatted a new partition and attempted to install to that one and I'm having the same problem. The disk is a real win 7 pro x64 disk, it is in pristine condition and was opened only yesterday when i went to install the OS so i don't think the disk is the problem, however i'm downloading the Windows 7 iso from the microsoft website and am gonna give that a shot. Does anyone have any ideas or suggestions?Oh yes, and it doesn't seem to want to let me run the Chkdsk utility, it always tells me that i need to reboot and run it from the installation disk which is what i have been doing
I am helping a friend out with her computer, she had one of those annoying viruses that say you have a bunch of things wrong and try to get you to buy stuff and a few others that I can't remember. I ran malaware bytes and got rid of them all. I thought that would be the end of it. She wanted Itunes and it would never install and the error message for it was related to windows updates. She purchased the computer last may and I was looking at the updates and all of the updates have failed since then, first being service pack 1. It wouldn't automatically do it, so I downloaded the standalone file and it would tell me it was unsuccessful and to restart the computer and try again. I downloaded the readiness tool, ran it, didn't work, ran it in aggressive mode, that didn't work. So I gave up and was going to reset it back to factory. The F8 command for the advanced boot methods does have "repair your computer" option but I click it and it just starts windows normally. Over and over. I made a repair disc through the windows options, and dell data safe, and when I boot from them I get the winload.exe file is missing or corrupt status: 0xc000000d and when I use dell data safe program to restore back to factory, it restarts and gives me the same thing. I have googled all day and searched forums for hours and I am getting nowhere. Resetting it to factory was going to be the easy way for me, and now I just want to throw the thing out the window.
Rtl100.BPL is corrupt and I am clueless. Also, two, MFC90u.dll is missing and even tho I downloaded "Paretologic" for the express purpose of repairing that one, it has failed miserably.
I am helping a friend out with her computer, she had one of those annoying viruses that say you have a bunch of things wrong and try to get you to buy stuff and a few others that I can't remember. I ran malaware bytes and got rid of them all. I thought that would be the end of it. She wanted Itunes and it would never install and the error message for it was related to windows updates. She purchased the computer last may and I was looking at the updates and all of the updates have failed since then, first being service pack 1. It wouldn't automatically do it, so I downloaded the standalone file and it would tell me it was unsuccessful and to restart the computer and try again. I downloaded the readiness tool, ran it, didn't work, ran it in aggressive mode, that didn't work. So I gave up and was going to reset it back to factory. The F8 command for the advanced boot methods does have "repair your computer" option but I click it and it just starts windows normally. Over and over. I made a repair disc through the windows options, and dell data safe, and when I boot from them I get the winload.exe file is missing or corrupt status: 0xc000000d and when I use dell data safe program to restore back to factory, it restarts and gives me the same thing. I have googled all day and searched forums for hours and I am getting nowhere. Resetting it to factory was going to be the easy way for me, and now I just want to throw the thing out the window.
I had a BSOD when Windows was loading and couldn't get back to Windows anymore. I just kept happening and it was so fast couldnt see what caused it. So I decided to reinstall Windows 7 from the scratch. Installed it on SSD after formating boht SSD and HDD. Installation went to 100%, computer booted and now i got this message.
windowssystem32configsystem File missing or corrupt 0xc0000001
Tried reinstalling for second time, formating all drives. Same thing happens.So I tried using the repair function on the DVD, and manually replacing the SYSTEM file but its also missing from the backup folders.Is there any way to get the missing file to the right location? Like does Win7 DVD have it somewhere?
I am using Windows 7 Professional SP1 32 bit on a desktop machine. I run ESET NOD32 Anti-virus 5.0 and Comodo Free Firewall in the background. I do a weekly manual scan with Malwarebytes Anti-Malware and Super AntiSpyware. Malwarebytes has never detected a threat and Super AntiSpyware detects about 130 threats each week. My start up folder has 5 programs that start up and run in the background. Recently the machine has become very sluggish, some programs take a very long time to open and when I am using various programs they sometimes stop responding but sometimes they recover by themselves if I wait long enough.A couple of days ago I ran sfc /scannow from an elevated command prompt. After it ran it said that it could not fix several corrupted Windows files. I looked in the log file and I didn't understand what I was reading and I couldn't tell which files were corrupt or how to fix them. I ran sfc /scannow a total of 3 times rebooting after each time and each time it told me it could not fix several corrupted Windows files.
I was surprised that when I ran sfc /scannow that it did not ask me to insert the Windows 7 installation CD so it could replace the corrupted files. When I would run sfc /scannow on my Windows XP Pro machines I always had to insert the XP installation CD so it could copy files from the CD into the machine.Today I booted the machine with the Windows install CD and selected "Repair". The "System Recovery Options" screen appeared. My choices were:
- Startup repair - System restore to an earlier point in time - System image recovery - Windows memory diagnostics - Command prompt
The machine starts up OK so there were no choices that apply to repairing Windows. When I was running XP Pro the system disk would actually do a repair action.I am thinking that the cause of the sluggish, some programs taking a very long time to open and various programs sometimes stop responding may be caused because of the corrupt Windows file sfc /scannow couldn't fix.Is there a way to replace the corrupt Windows 7 corrupt files that sfc /scannow says it cannot fix? The other option is to do a complete clean install of Windows from scratch. Not too much fun as I will have re-install all of my software and re-option everything.
