My Acer laptop is suddenly having this issue and will not boot into windows in any mode including safe mode. I tried using a recovery disc with no luck. I can get to the command prompt from the recovery disc and I tried fixboot and fixmbr with no results.
View 14 Replies i have windows 7 Starter and bought the disk to upgarde it to windows professional, so i put dvd into dvd-unit... duh and after loading two white bars for secondary boot device it displays the hell message "winload is missing or corrupt..." i have already tried EVERYTHING on the forums and on the web including all the bootrec processes, rebuilt bcd, get a new copy of winload switching carpets, and modding BCD file to specify diferent routes for windows to search the file.. and yet nothing...I personally think the problem is that my C: drive it's partitioned in 3 one called system backup (wich is the standar recovery console for vaio, another partition of around 10 gb named System reserved and the free space where windows is located.
Administrador de arranque de Windows
----------------------------------
Identificador {bootmgr}
device partition=C:
description Windows Boot Manager
locale en-us
[code]...
I am helping a friend out with her computer, she had one of those annoying viruses that say you have a bunch of things wrong and try to get you to buy stuff and a few others that I can't remember. I ran malaware bytes and got rid of them all. I thought that would be the end of it. She wanted Itunes and it would never install and the error message for it was related to windows updates. She purchased the computer last may and I was looking at the updates and all of the updates have failed since then, first being service pack 1. It wouldn't automatically do it, so I downloaded the standalone file and it would tell me it was unsuccessful and to restart the computer and try again. I downloaded the readiness tool, ran it, didn't work, ran it in aggressive mode, that didn't work. So I gave up and was going to reset it back to factory. The F8 command for the advanced boot methods does have "repair your computer" option but I click it and it just starts windows normally. Over and over. I made a repair disc through the windows options, and dell data safe, and when I boot from them I get the winload.exe file is missing or corrupt status: 0xc000000d and when I use dell data safe program to restore back to factory, it restarts and gives me the same thing. I have googled all day and searched forums for hours and I am getting nowhere. Resetting it to factory was going to be the easy way for me, and now I just want to throw the thing out the window.
View 10 Replies View RelatedI am helping a friend out with her computer, she had one of those annoying viruses that say you have a bunch of things wrong and try to get you to buy stuff and a few others that I can't remember. I ran malaware bytes and got rid of them all. I thought that would be the end of it. She wanted Itunes and it would never install and the error message for it was related to windows updates. She purchased the computer last may and I was looking at the updates and all of the updates have failed since then, first being service pack 1. It wouldn't automatically do it, so I downloaded the standalone file and it would tell me it was unsuccessful and to restart the computer and try again. I downloaded the readiness tool, ran it, didn't work, ran it in aggressive mode, that didn't work. So I gave up and was going to reset it back to factory. The F8 command for the advanced boot methods does have "repair your computer" option but I click it and it just starts windows normally. Over and over. I made a repair disc through the windows options, and dell data safe, and when I boot from them I get the winload.exe file is missing or corrupt status: 0xc000000d and when I use dell data safe program to restore back to factory, it restarts and gives me the same thing. I have googled all day and searched forums for hours and I am getting nowhere. Resetting it to factory was going to be the easy way for me, and now I just want to throw the thing out the window.
View 1 Replies View RelatedI tried to use the recovery 7 disk on my laptop...Half way through the process my laptop froze and shut off. When I turned it back on its said winload.exe was missing or corrupt. With the status of 0xc000000f. It wont let me do anything with the computer. Only go into memory tool diagnostics and the setup utility. It says to install the windows 7 install disks. I dont have that I only have the recovery disks.
View 3 Replies View RelatedI am using Vista and the computer just restarted for no reason. The problem though the computer will not start. I am at a black screen with the message that the file windowssystem32winload.exe is missing or corrupt. The error code is 0xc000000f. I don't know what to do. The computer is asking for the startup disc. I did not receive one when I purchased my computer. I am lost as to what to do.
View 1 Replies View RelatedI'm getting the winload.exe missing or corrupted error, and I can't seem to find a fix for it if you have an oem computer, and thus no installation disk. I cannot go to the startup repair option (pressing f8 while on the screen), it just does nothing.
View 3 Replies View RelatedI'm trying to restore my Windows 7 64bit machine to its factory settings at the moment, and I've tried the following but they've all failed.1.) Boot up and hit F8, select Repair computer, but then it just boots Windows normally.2.) Create System Repair Disc, and from BIOS boot-up, choose boot from DVD-RW, but when it does that and loads Windows files, Error 0xc000000d and winload.exe missing comes up.3.) When I tried to insert the installation disc that came with my computer, it's not recognized and nothing happens (during boot from DVD-RW).*Note - Just today when I tried to do a system restore, it said that I had no previous restore points, but I just restored a week ago, so that might add some info.
View 3 Replies View RelatedI just built my first computer and was happy to turn it on. When I tried to install Windows 7 I received the error in the title. I had Windows XP on the computer before but formatted it all to two 80GB NFTS partitions. When I try to boot up the Windows 7 recovery disc(or XP for that matter), my moniter goes off, saying no signal(The Windows 7 install disc is the only disc that I've tried that actually boots). I am about to try booting the recovery console off of a USB. Is there anything else that might alleviate this problem? Everything is checked and works fine inside the case.And just to make sure, I have no operating system, so after the BIOS screen the moniter will say no signal anyway, with a disc in or not.
View 9 Replies View RelatedI face issue with my acer 5738G. Its shows boot mgr missing or corrupt. System repair does not work. It shows unable to repair offline. While trying to install OS all over again it stuck in a blue screen with a message "starting setup ". I am blackout without my laptop.
View 8 Replies View RelatedMy laptop advent won't boot. Start up repair wont work, even a system repair cd wont fully load. Only thing i can get to is launch repair your computer, and the only thing that works there is command prompt.
Tried fixboot & fixmbr... They worked but rebuildbcd never finishes.
Rtl100.BPL is corrupt and I am clueless. Also, two, MFC90u.dll is missing and even tho I downloaded "Paretologic" for the express purpose of repairing that one, it has failed miserably.
View 2 Replies View RelatedI got an installation disk that actually has files on it and show up on my computer but I have a new problem now in which an error shows up saying that some of the neccesary files are not being found which is really unfortunate. The error code I am getting is:Ox80070017
View 8 Replies View RelatedI had a BSOD when Windows was loading and couldn't get back to Windows anymore. I just kept happening and it was so fast couldnt see what caused it. So I decided to reinstall Windows 7 from the scratch. Installed it on SSD after formating boht SSD and HDD. Installation went to 100%, computer booted and now i got this message.
windowssystem32configsystem
File missing or corrupt
0xc0000001
Tried reinstalling for second time, formating all drives. Same thing happens.So I tried using the repair function on the DVD, and manually replacing the SYSTEM file but its also missing from the backup folders.Is there any way to get the missing file to the right location? Like does Win7 DVD have it somewhere?
I have an Advent Roma 2001 configured, in PC World style, with a "recovery partition" alongside the system partition and, after resolving a hard disk problem, I found that the machine would not start/boot Windows 7. clearly some necessary files are missing or corrupted, but the normal system recovery tools have not solved the problem(s). I'm familiar with the process for resurrecting XP, but not its counterpart for Windows 7 the files and steps for doing this are rather different. it would seem that pretty much everything else is in place on the hard disk, but certain recovery programs report "0" Windows installations when Win 7 is still in place where it was before the disk problem, e.g. it is available to be selected by the main recovery/startup program...this prog can "see" it, but can't access/boot it.I can breathe some life into this anaesthetised device sooner rather than later...I may as well work my way through the whole lot rather than using a trial and error method that might take a long time.
View 3 Replies View RelatedI have an Macbook Pro with an Intel processor, which I have partitioned as a dual boot and have Windows 7 Ultimate X64 installed. This setup has ran fine until last week. I installed an old Guitar DVD course, and the default video player was Windows Media Player. For some reason the videos would only play sound but no video. The videos would play fine if I went to the folders and used a different media player, but within the lessons software it by default used Windows Media player. I tried updating all the codecs to play avi files but with no luck. I read where it was a known issue with WMP 12, and rolling back to WMP11 usually solved the issue. I found an older version of WMP 11, but I think it was infected with malware, and I was caught in an infinite boot loop where Windows wouldfind a problem, try to repair it, and couldn't, and reboot only to keep doing that over and over. I ran /fixmbr and /fixboot and managed to get out of the boot loop, but now I keep getting an error "Windows is unable to start due to a missing or corrupt file WindowsSysWOW64DriversSZKG64.sys From researching some it seems to be a driver from an antivirusspyware program I have installed called StopZilla. I've looked everywhere for some way to get past this but can't seem to find a solution. Also I have ran three different rescue cd's and nothing has shown up.
View 6 Replies View Relatedafter installing Windows 7 64bit, I start suffering from the next message:
windows 7 could not start because the following file is missing or corrupt: <Windows root>system32
toskrnl.exe
This issue continue occuring even after I tried several repairs of the OS. The strange thing is that only happen if remove the original disk from the DVD reader. If I leave the cd, the error does not occurred and the windows reboot normally.
I've just built my own computer with a friend and we installed windows 7 and it worked fine for 3 days. Then it started to not respond. Restarted the computer and it wouldn't start up again, came up with a bunch of errors. So I reformatted and it says "windowssystem32driverwdf0100.sdf is corrupt or missing." I've tried system repair but it won't work. It won't open command prompt or anything.
View 3 Replies View RelatedI have an Advent Roma 2001 configured, in PC World style, with a "recovery partition" alongside the system partition and, after resolving a hard disk problem, I found that the machine would not start/boot Windows 7. clearly some necessary files are missing or corrupted, but the normal system recovery tools have not solved the problem(s). I'm familiar with the process for resurrecting XP, but not its counterpart for Windows 7...the files and steps for doing this are rather different. it would seem that pretty much everything else is in place on the hard disk, but certain recovery programs report "0" Windows installations when Win 7 is still in place where it was before the disk problem, e.g. it is available to be selected by the main recovery/startup program...this prog can "see" it, but can't access/boot it.
files, command line statements, etc. so that I can breathe some life into this anaesthetised device sooner rather than later...I may as well work my way through the whole lot rather than using a trial and error method...that might take a long time. however, I'm also happy to be advised on the approach if and where this unnecessary or inadvisable.
The cd rom is corrupt / missing. Cant even update.Solution?
View 1 Replies View Related1. Same computer in my signature/specs except for the optical drive.
2. Hardware passes Windows 7 compatibility test.
3. The install DVD can be read properly. Creating an ISO image of it works perfectly. No read errors on the disk itself.
4. The optical drive is practically brand new, the cable is brand new, never had any I/O errors using this drive.
5. RAM passes MS memory testing 6 times. 0 errors.
6. Windows 7 Ultimate install fails at the same point, during file unpacking, 3 times. Says files are missing or corrupt.
The install disk was created at home from an ISO download, student licensed Windows 7 Ultimate, 32 bit but I don't think that really matters. See #3.Is there anything else left to look at? Any ideas why this won't work?
have a Toshiba Satellite A505-S6980 Windows 7 Home Edition Premium Edition laptop. I recently tried to dual boot with Windows XP Professional service pack 3 iso cd. I partitioned my primary windows 7 drive and installed the windows xp on the smaller partition. The windows xp was working fine then I downloaded easybcd and tried to add XP to my OS choices menu, while logged on my XP partition, and then each time I try to load XP from now on I get a blank screen that says Windows could not start because the following file is missing or corrupt: [CODE]
View 14 Replies View RelatedI had some issues previously with XP (blue screen of death). I thought I may have had a virus so I went ahead and reformatted my hard drive completely and purchased the win 7 upgrade cd and license in order to do a clean install.When I try to boot from the cd, I get an error right when it's done loading that says that the kernel is missing or corrupt.I am not a computer expert, but I'm thinking I may have some sort of motherboard problem at this point...
View 7 Replies View RelatedWindows/system32/drivers/ql2300.sys missing or corrupt shows it after boot What can i do? I haven't got that file...
View 6 Replies View RelatedRecently installed Windows 7 64 bit on my main hdd (had previously had it installed as 32 bit). Now my back-up drive gives me this error. The back up drive does not have windows installed on it, and is not a boot drive. But when it is connected I get this message: "Windows root system32 ntoskrnl exe missing or corrupt." In order to boot on my main drive, I have to disconnect the back up drive.
I don't understand where to reinstall the missing file - if I put it in the Windows 7 files, won't that mess up my main drive?
I recently upgraded from WinXP x32 to Win7 Ultimate x64 and kept getting the:"Windows rootsystem32 toskrnl.exe is missing or corrupt" when attempting to boot.
My system:
CPU: Core2 Quad Q8300
Hard Drives:
Primary (System) = Western Digital 300GB 10,000rpm
Secondary (Data) = Western Digital 1T-GB 7,200rpm
*External cloned CasperXP backups for BOTH on matching HDs -- However the backup Sys HD is still configured w/WinXP x32 until I can get all problems ironed out.
Problem Discovered:Upon booting the OS is pointing to the Secondary HD as Primary,however, once booted the C: drive is indeed the intended 300GB and Secondary is the 1T-GB HD.
How Discovered:I needed to relaunch the OLD XP system to access some old Firefox Bookmarks so replaced Sys HDs. Had to reconfigure boot sequence to get OLD x32 OS HD to boot (successful). Saved Bookmarks and shut down. Replaced the Old x32 Sys HD with the New x64 Win7 OS HD. Then got the above error repeatedly. Played with boot settings and BIOS settings for an hour before identifying that the x64 Win7 OS would ONLY boot with the Secondary Data HD listed as the Primary Boot Device. Do note that the OS files are all on the 300GB Primary even as the boot sequence points to the secondary HD.
QUESTION:Is it possible to correct this situation WITHOUT having to do a clean install of Win7 x64 with the 1T-GB Secondary Data Drive disconnected, in other words doing a clean install with ONLY the 300GB Primary connected?
when i turn on my acer laptop all it does is show a error massage saying windows could not start because bootvill.dll file is missing or corrupt. i dont have a cd-rom because it a notebook. i downloaded a regeristy cleaner to a flash drive but when i put it in the pc still goes to that error massage i also change the boot order to start from my flash drive but it still when back to the error screen . i used the alt + f10 that gotten me into the system restore it when half way done than whent back to the error screen anything else i can try?
View 1 Replies View RelatedI started the StartUp Repair again and it has this error: Code: Root cause found:
Boot manager is missing or corrupt.
Repair action: File repair.
Result: Failed. Error code = 0x15
time taken = 0 ms
What does this mean?
I have recently setup a raid 0+1 array on a computer with 4 identical hard drives. I installed windows 7 and the installation without a hitch. However on the reboot a windows error message appears and says the following:
File: \Windows\system32\ntoskrnl.exe
Status: 0xc0000221
Info: Windows failed to load because the kernel is missing, or corrupt.
I have tried many things in an attempt to resolve this issue. I have tried reinstalling, using a different DVD drive and removing the RAID array to no avail. I have also disconnected the hard drive which is not associated with the RAID array also to no avail.
I have an Acer Aspire one. It came with XP and I have it dual booting into Windows 7 which is working well which I installed from a USB Drive as this model doesnt have a CD Drive.
In the main boot screen it says "Earlier version of Windows" For XP and "Windows 7" for windows 7. All was working well until yesterday...
Now I can't boot into "Earlier version of Windows" i.e. XP. It gives me the C:\windows\system32\config\system is missing or corrupt message. I can boot into Windows 7 fine but all of my work stuff is on the XP platform (I know I can access the files from "7" but I need to get it operational again).
Any ideas? Can I do a repair from the USB Drive?..I've tried a couple of things to boot from the USB Drive but to no avail. And I can't find the BOOT.INI file from XP (I think it gets moved to Windows 7's hidden boot partition when I installed it. I cant seem to access that partition either).
I'm trying to add Neat Works software, but I keep getting the error message Arial font is either corrupt or missing. I have tried to delete it so I could copy it back on. It will not let me delete it.
View 1 Replies View Related