installing Windows 7 on a virtual machine.I have 178MB RAM (which I know isn't enough), but it does the Starting Windows screen before the installation, but then it comes up with this error: File: windowssystem32configsystem Status: 0xc0000001 Info: Windows failed to load because the system registry file is missing, or corrupt.
I have no other OS on the virtual machine.
I have a Windows 7 Installation Problem. Firstly my specs:i7 3820Rampage IV FormulaGTX 680 EVGA16 GB Corsair Veangence RAM (purchased today because i thought the old ram could have been the issue) I have a 120GB Intel SSD which i want to install windows 7 on, the installation is succsessful, but when it restarts automatically, Windows Boot Manager appears with this messege: WINDOWS FAILED TO START. A RECENT SOFTWARE OR HARDWARE CHANGE MAY BE THE CAUSE.TO FIX THE PROBLEM: (Just says steps to get into windows repair)Than says:FILE: Windoessystem32configsystemSTATUS: 0xc0000017INFO: Windows failed to load because the system registry file is missing or corrupt. I have tried:Changing the SATA port for my ssdWindows RepairCopying the Windows 7 disc at 1x speed.Trying to install it again and again..
View 5 Replies View RelatedI have recently setup a raid 0+1 array on a computer with 4 identical hard drives. I installed windows 7 and the installation without a hitch. However on the reboot a windows error message appears and says the following:
File: \Windows\system32\ntoskrnl.exe
Status: 0xc0000221
Info: Windows failed to load because the kernel is missing, or corrupt.
I have tried many things in an attempt to resolve this issue. I have tried reinstalling, using a different DVD drive and removing the RAID array to no avail. I have also disconnected the hard drive which is not associated with the RAID array also to no avail.
I turned on my pc, and it would not let me get past start up, saying
file : Windowssystem32
tkrnlpa.exe
status : 0xc00000e9 Info:
Windows failed to load because the kernel is missing or corrupt
I tried a few things, mostly the startup repair option that it would (recommend) to me next to the start windows normally option. this did absolutely nothing, and the problem continued. So I said ok, I give up, and decided to back up everything and completely reformat and reinstall windows. I did this, it installed successfully. I couldn't believe it...even after completely reformatting, I could not get past start up. The system repair option still does nothing, even with the disc in and I tried reinstalling it a bunch of times, but now it wont even do that correct all the way through, keeps coming up with errors talking about files either missing or corrupt. I wiped partitions and tried again alot of times, but nothing. Now it doesnt even recognize windows 7 as being installed at all. [URL]
I have an Macbook Pro with an Intel processor, which I have partitioned as a dual boot and have Windows 7 Ultimate X64 installed. This setup has ran fine until last week. I installed an old Guitar DVD course, and the default video player was Windows Media Player. For some reason the videos would only play sound but no video. The videos would play fine if I went to the folders and used a different media player, but within the lessons software it by default used Windows Media player. I tried updating all the codecs to play avi files but with no luck. I read where it was a known issue with WMP 12, and rolling back to WMP11 usually solved the issue. I found an older version of WMP 11, but I think it was infected with malware, and I was caught in an infinite boot loop where Windows wouldfind a problem, try to repair it, and couldn't, and reboot only to keep doing that over and over. I ran /fixmbr and /fixboot and managed to get out of the boot loop, but now I keep getting an error "Windows is unable to start due to a missing or corrupt file WindowsSysWOW64DriversSZKG64.sys From researching some it seems to be a driver from an antivirusspyware program I have installed called StopZilla. I've looked everywhere for some way to get past this but can't seem to find a solution. Also I have ran three different rescue cd's and nothing has shown up.
View 6 Replies View RelatedI'm trying to re-install my firefox browser, but every time I try to run the executable file it loads to 4% then closes.It gives me a window that says..Extraction Failed ile is corrupI'm also trying to update my drivers. But every time I run my graphics driver installation file it tries to "verify installation" then I get the following window...SIS ErrorInstaller Integrity check has failed. Common causes include incomplete download and damaged media. Contact the installer's author to obtain a new copy. [CODE]
View 14 Replies View Related1. Same computer in my signature/specs except for the optical drive.
2. Hardware passes Windows 7 compatibility test.
3. The install DVD can be read properly. Creating an ISO image of it works perfectly. No read errors on the disk itself.
4. The optical drive is practically brand new, the cable is brand new, never had any I/O errors using this drive.
5. RAM passes MS memory testing 6 times. 0 errors.
6. Windows 7 Ultimate install fails at the same point, during file unpacking, 3 times. Says files are missing or corrupt.
The install disk was created at home from an ISO download, student licensed Windows 7 Ultimate, 32 bit but I don't think that really matters. See #3.Is there anything else left to look at? Any ideas why this won't work?
when i turn on my acer laptop all it does is show a error massage saying windows could not start because bootvill.dll file is missing or corrupt. i dont have a cd-rom because it a notebook. i downloaded a regeristy cleaner to a flash drive but when i put it in the pc still goes to that error massage i also change the boot order to start from my flash drive but it still when back to the error screen . i used the alt + f10 that gotten me into the system restore it when half way done than whent back to the error screen anything else i can try?
View 1 Replies View Relatedby accident my power source for my computer shut off so i rebooted my computer. then it started to pop up setupapi.dll is missing and failed to load powrprof.dll. now i can't run majority of my programs nor can i watch videos on Internet.
View 2 Replies View RelatedJust got all the parts yesterday, put i all together today, all is running fine.Just in case i'll post the components:
Gigabyte 990fx-ud3
Amd fx-8120
Gigabyte hd8950 OC
HyperX 2x4GB 1600Mhz
So i bought Windows 7 Home Premium from the same store i got this at (Webhallen, pretty much swedens largest component retailer) to replace the standard Home edition (which i got with my "old" packard bell!).
I have 2 HDDs, one from the packard bell (1tb) and one i recieved from a friend, a 320gb seagate. I ran with both in my packard bell for a while, using the 320gb for the system. It ran without any problems.So, i boot the CD, go through the setup and format the 320GB. (I also formatted some reserved space for OEM files from the Packard bell harddrive since i won't be using the packard bell any time soon).I proceed with the installation.The copying of the files goes very quick and when it reaches the expanding of files it takes ages before it finally comes to the error:Windows cannot install required files. The file may be corrupt or missing. Make sure all files required for installation are available, and restart the installation. Error code: 0x80070017.Immedieatly i whipped up the laptop and googled it, trying the different "sollutions" to no avail, like simply trying to install again without rebooting, taking out a RAM stick and only running with one in the master slot, taking out all excess Harddrives etc etc. i also ran Memtest86, clean, no errors!
I tried install Ubuntu on it, but that didn't go well either. It loaded for ages and then i got a very strange horizontal black and white striped screen, the black stripes being jagged and pixelated.I found my old windows 7 home cd from my packard bell and tried installing with that one. Same result, Error code: 0x80070017.
I had a BSOD when Windows was loading and couldn't get back to Windows anymore. I just kept happening and it was so fast couldnt see what caused it. So I decided to reinstall Windows 7 from the scratch. Installed it on SSD after formating boht SSD and HDD. Installation went to 100%, computer booted and now i got this message.
windowssystem32configsystem
File missing or corrupt
0xc0000001
Tried reinstalling for second time, formating all drives. Same thing happens.So I tried using the repair function on the DVD, and manually replacing the SYSTEM file but its also missing from the backup folders.Is there any way to get the missing file to the right location? Like does Win7 DVD have it somewhere?
I tried to use the recovery 7 disk on my laptop...Half way through the process my laptop froze and shut off. When I turned it back on its said winload.exe was missing or corrupt. With the status of 0xc000000f. It wont let me do anything with the computer. Only go into memory tool diagnostics and the setup utility. It says to install the windows 7 install disks. I dont have that I only have the recovery disks.
View 3 Replies View RelatedI have an Acer Aspire one. It came with XP and I have it dual booting into Windows 7 which is working well which I installed from a USB Drive as this model doesnt have a CD Drive.
In the main boot screen it says "Earlier version of Windows" For XP and "Windows 7" for windows 7. All was working well until yesterday...
Now I can't boot into "Earlier version of Windows" i.e. XP. It gives me the C:\windows\system32\config\system is missing or corrupt message. I can boot into Windows 7 fine but all of my work stuff is on the XP platform (I know I can access the files from "7" but I need to get it operational again).
Any ideas? Can I do a repair from the USB Drive?..I've tried a couple of things to boot from the USB Drive but to no avail. And I can't find the BOOT.INI file from XP (I think it gets moved to Windows 7's hidden boot partition when I installed it. I cant seem to access that partition either).
I had Windows Vista and I upgraded using the 'clean install' to Windows 7. I had been experiencing BSODs (blue screen of death) and I thought a re-install, or an upgrade would solve those issues. However, I continue getting those BSODs now with Windows 7 as well.I can't quite recall the stop errors and names, but they were mostly IRQL_NOT_LESS_OR_EQUAL. I also had 'memory management' sometimes.Recently I powered on my computer and realized everything was running slowly, and I've noticed the BSODs have stopped. I ran everything, anti- malware, virus, spyware programs and they found nothing. I ran memory diagnostics and it came up with nothing. There's nothing really on this computer to be slowing it down since I haven't fully replaced all my files and it's a new OS.The only thing that found anything out of place was after running SFC /scannow, the CBS.log file says this in several places:
[code]...
What I could understand from that is it's saying that a file, called msdrm.dll.mui, is corrupt. Apparently it's in the 'en-US' folder (assuming). It also says on the last line, 'file is missing'.Now, I've replaced from the actual Windows 7 installation CD, the file msdrm.dll.mui in the en-US folder, and in another folder that had the same file. After restarting, the computer still runs sluggishly.My question is, why would the system file still be corrupt even after replacing it from the installation CD? The CD is fine, no scratches or anything like that, and it's virtually new.Also, could my system be missing something that the file msdrm.dll.mui needs to function properly? (I ask this because it says 'file missing') What can I do about this system file to fix it?Note: I looked up the system file msdrm.dll.mui and I read that it's needed for system performance (and performance right now is my issue so I'm guessing this is what's making my computer run slugglishly).
Corrupt files in System File Checker - now whaIn trying to fix a still unsolved problem with my WLAN network connection (detailed here, if relevant: WLAN issue - WiFi can't connect - Tech Support Guy Forums), it was concluded that a main problem is corrupt files identified by the System Files checker.This is the message I get when running the checker toold corrupt files but was unable to fix some of them Checking the log, I searched for cannot repai but nothing comes up. Searching for in the logs turns up some cases of annot verify component files for Microsoft-Windows-Security-Kerberoarch for turns up nothing. Not sure what to do now. My computer is a Dell XPS 15 Z
View 8 Replies View Related"windows 7 setup.exe corrupt file the file or directory is corrupt"I'm trying to install 7 32bit OEM Home Premium with the legit bought holographic CD (not a burned image of any kind) onto a Gateway laptop with a brand new hard drive.I was getting this error installing the OS the regular way booting to the cd and installing from it, so instead I copied the contents of the cd to a freshly quick formatted NTFS partition on the new laptop hard drive, then used bootsect and diskpart to setup the disk. It boots just fine and also gets the same error installing straight from the hard drive.
View 9 Replies View RelatedMy new work computer, running Windows 7 is now unable to install software. I get various error msgs towards the end of installations. Usually some component or dll cannot be found. Aside from this inconvenience my system seems to be running smoothly. Our IT support guys have examined the system and have determined that my registry has become corrupt. They want to take my system and reformat it, and also run some intense hardware diagnostics. This is the second time this has happened in two months. I suspect these guys are just taking the easy option of reformatting rather than actual trouble shooting.
View 9 Replies View RelatedI have had this problem a few times and it causes the laptop to jam ever minute for five secs.Win 7 Pro 32bit on ProBook 4310s. I thought a reload would help so did thisIt was doing it updates and a pop up "The configuration registry database is corrupt". Now the problem is back after reload. Device mgr shows no errors at all. About the fourth time this has happended and I am presenting tomorrow.
View 6 Replies View RelatedI have a computer with a corrupt registry to the point where it will not boot. I do not have a good system recovery and the backup registry files in RegBack don't help when I copy them over to system32.
I can't use any of the registry repair tools that I have found because they all require booting into windows to run them and I can't boot windows.I am able to copy the files in RegBack to a flash drive, so I did that.My question is whether there is a tool that I can run on ANOTHER Windows 7 computer that will scan the registry files on the flash drive instead of the files of the computer I am running windows successfully on?
So ive been getting the black screen with movable cursor lately and have tried many a methods to remove it i tried checking in my event log for something, and this is waht it said "The following boot-start or system-start driver(s) failed to load:dtsoftbus01" So what does this mean and how can i fix this?
View 4 Replies View RelatedMonday couldn't boot up PC, had to go to system recovery and restore to previous day.
Log files show below that 4 things failed to load. Tuesday couldn't boot up PC again.. tried to restart like 4-5 times.. Finally comes up and in the logs there's numerous things that failed to load. Running a sfc /scannow right now.
I found corrupted system files, but it appears that the hard disk is fine. executed chkdsk and no bad sectors.Just looked into this on event viewer-The following boot-start or system-start driver(s) failed to load:xsoaynmfmfxpefxbozedltnzvijcvI am running Acer Aspire X3950-U3022 with Windows 7 Home Premium Home Edition.
View 4 Replies View RelatedI'm not sure where to even begin to fix these problems. Some online searches suggested doing a system repair but I want to get some more feedback here before proceeding.Here is the message from the event log:The following boot-start or system-start driver(s) failed to load:
AFD
cmdGuard
cmdHlp
CSC
DfsC
discache
ElbyCDIO
[code]...
I realized some of these are not Windows 7 related but most are. While the computer "works", I do experience frequent reboots and freezes. Perhaps some of these driver loading failures are part of the cause of my issues.
Brand new computer, nothing on the hard drives:
Intel Core 2 Duo E8400 Wolfdale 3.0Ghz LGA 775
ASUS P5Q SE/R LGA 775 Intel P45 MOBO
EVGA Geforce GTX 285 Video Card
4 Gigs (2x@GB) G Skill 1066 MHz RAM
Two hard drives and a CD-RW all SATA
Had problems from the start, the install from DVD froze, and after hard-reset I continued to reboot, a new error came up each time. First it was corrupt kernel, then missing registry files, then missing bootmgr, a BSOD, etc.
Somehow the install finally worked. I booted up and started loading drivers; loaded the GTX 285 Windows 7 specific driver, and all hell broke loose again: on restart, it froze, hard-reset right back into the earlier problems.
I cannot boot from my hard drive, or my DVD, both will continue to bring up the "please boot from repair CD" or EMS mode with a different error each time.
I just slow burned a hash-verified RC 7100 64 bit .iso, which I will try out. Failing that I'm going to use linux fdisk to clear my partitions and try to start from there. (I'm at work now, so I have 8 hours to ponder this.)
Any idea of what's going on? Any ideas?
I have a toshiba laptop running on windows 7. One day I turned it on and it said "bootmgr is missing press ctrl alt delete to restart."I have been researching how to fix it and have made a repair cd, which boots it and sends me to the start up process, but when I get to the command prompt option and type "bootrec/fixboot" it says "the volume does not contain a recognized file system."
View 6 Replies View RelatedI dont know if this is posted in the right area but I'm so desperate to get my laptop working its unreal. First it started off with my laptop crashing, I had totally forgot it needed to do a windows update and turned off my laptop in hopes that it would work properly. After that my laptop has not been working. The machine turns on and gives me two options. Start windows normally or do a repair. Upon starting windows normally, it loads so far before sending me back to the two options of start windows normally or repair. On the second time I clicked repair. My laptop then goes so far before presenting me with a blue screen that is usually the screen where my accounts are. The cursor still moves but it loads no further even after leaving it an hour. I decided to make a repair disk, hoping that the problem was because of windows. the disk loads, gives me a choice on the keyboard language then does nothing. I honestly have no idea what to do, I want to keep all the files safe on my computer as I havent backed them up and I have worked so hard on the projects.
View 1 Replies View Relatedcan't install lottery program the required system file is missing. i need windows system 32.i's running windows 7 on my pc.
View 2 Replies View Relatedstatement of windows failed to load because a critical system driver is missing or corrupt. It said for me to insert disk, or contact administrator however, I have no disk
View 3 Replies View RelatedI have an Advent Roma 2001 configured, in PC World style, with a "recovery partition" alongside the system partition and, after resolving a hard disk problem, I found that the machine would not start/boot Windows 7. clearly some necessary files are missing or corrupted, but the normal system recovery tools have not solved the problem(s). I'm familiar with the process for resurrecting XP, but not its counterpart for Windows 7 the files and steps for doing this are rather different. it would seem that pretty much everything else is in place on the hard disk, but certain recovery programs report "0" Windows installations when Win 7 is still in place where it was before the disk problem, e.g. it is available to be selected by the main recovery/startup program...this prog can "see" it, but can't access/boot it.I can breathe some life into this anaesthetised device sooner rather than later...I may as well work my way through the whole lot rather than using a trial and error method that might take a long time.
View 3 Replies View RelatedI've just built my own computer with a friend and we installed windows 7 and it worked fine for 3 days. Then it started to not respond. Restarted the computer and it wouldn't start up again, came up with a bunch of errors. So I reformatted and it says "windowssystem32driverwdf0100.sdf is corrupt or missing." I've tried system repair but it won't work. It won't open command prompt or anything.
View 3 Replies View RelatedI have an Advent Roma 2001 configured, in PC World style, with a "recovery partition" alongside the system partition and, after resolving a hard disk problem, I found that the machine would not start/boot Windows 7. clearly some necessary files are missing or corrupted, but the normal system recovery tools have not solved the problem(s). I'm familiar with the process for resurrecting XP, but not its counterpart for Windows 7...the files and steps for doing this are rather different. it would seem that pretty much everything else is in place on the hard disk, but certain recovery programs report "0" Windows installations when Win 7 is still in place where it was before the disk problem, e.g. it is available to be selected by the main recovery/startup program...this prog can "see" it, but can't access/boot it.
files, command line statements, etc. so that I can breathe some life into this anaesthetised device sooner rather than later...I may as well work my way through the whole lot rather than using a trial and error method...that might take a long time. however, I'm also happy to be advised on the approach if and where this unnecessary or inadvisable.