Can't Install Lottery Program Required System File Is Missing
Aug 30, 2011can't install lottery program the required system file is missing. i need windows system 32.i's running windows 7 on my pc.
View 2 Repliescan't install lottery program the required system file is missing. i need windows system 32.i's running windows 7 on my pc.
View 2 RepliesAll of a sudden my computer after 1 hour freezes and crashes completely.I get a black screen of death with error code 0xc000000e Recovery Screen After i hit enter i got another message saying Your PC needs to be repaired. The application or operating system couldnt be loaded because a required file is missing or contains errors. File: Windowssystem32winload.exe Error code: 0cx000000e After the error happens and I restart, the main hard drive will not show up and I have to restart again for it to show up.SO i just went ahead and formatted the PC and reinstalled windows 7 from scratch.After an hour or less the same thing happened again and also when I reboot the computer asks me to choose which windows 7 I want to log into. Why is this showing up if I formatted the disc completely (Deleted and created New disc while i was reinstalling windows 7)My main drive is a Crucial m4 SDD 2.5 128GB Sata I have 4 other drives with over 2tb each but i use this for files. Windows is installed on just the crucial HD?
View 9 Replies View RelatedJust got all the parts yesterday, put i all together today, all is running fine.Just in case i'll post the components:
Gigabyte 990fx-ud3
Amd fx-8120
Gigabyte hd8950 OC
HyperX 2x4GB 1600Mhz
So i bought Windows 7 Home Premium from the same store i got this at (Webhallen, pretty much swedens largest component retailer) to replace the standard Home edition (which i got with my "old" packard bell!).
I have 2 HDDs, one from the packard bell (1tb) and one i recieved from a friend, a 320gb seagate. I ran with both in my packard bell for a while, using the 320gb for the system. It ran without any problems.So, i boot the CD, go through the setup and format the 320GB. (I also formatted some reserved space for OEM files from the Packard bell harddrive since i won't be using the packard bell any time soon).I proceed with the installation.The copying of the files goes very quick and when it reaches the expanding of files it takes ages before it finally comes to the error:Windows cannot install required files. The file may be corrupt or missing. Make sure all files required for installation are available, and restart the installation. Error code: 0x80070017.Immedieatly i whipped up the laptop and googled it, trying the different "sollutions" to no avail, like simply trying to install again without rebooting, taking out a RAM stick and only running with one in the master slot, taking out all excess Harddrives etc etc. i also ran Memtest86, clean, no errors!
I tried install Ubuntu on it, but that didn't go well either. It loaded for ages and then i got a very strange horizontal black and white striped screen, the black stripes being jagged and pixelated.I found my old windows 7 home cd from my packard bell and tried installing with that one. Same result, Error code: 0x80070017.
When I try to install Windows 7 on my Dell Inspiron 1545 laptop, I get to step number 4, but when I click install I get an error saying that a required CD/DVD drive driver is missing. I know that I have the most current drivers and that my DVD drive/driver is supposed to be supported by Windows 7.Is it possible that my installation DVD is messed up?
View 2 Replies View Relatedmy sd card or any usb storege device not working, it gives message format disk
View 1 Replies View Relatedletest mass storage software to upgrade on line it self
View 1 Replies View RelatedI have just finished building a new desktop, here is the config:
Intel Core i5-2500K
ASUS P8P67 Pro, Intel P67
CORSAIR Dominator CMP8GX3M2A1600C9 2x 4GB
OCZ Vertex II Series SATA II 2.5" SSD, 60GB
SAMSUNG Spinpoint F3 1.0TB
SAPPHIRE HD 6950 2GB
Fractal Design Define R3
CORSAIR HX750
SONY OPTIARC AD-7260S SATA, DVD-RW
Using access to MSDN-AA, I got an ISO and key for Windows 7 Pro x64 (DVD - English). I then burnt the ISO to a DVD using my current computer, a WinXP 6 year old ACER laptop. When trying to do the clean install of Win 7 Pro on the new desktop, the installer starts up fine, but after choosing my language and regional settings, I get the famous "A required CD/DVD device driver is missing" error.
Here are the things I have tried, in vain:
1) Installing the various available SATA drivers from the ASUS motherboard DVD. This doesn't work and gives a "No new devices could be found" error.
2) Reburning the ISO with ImgBurn at 2.4x speed with verify on.
3) Redownloading the ISO from MSDN-AA and reburning the new ISO at 2.4x speed.
Note that I would have tried to make a bootable flashdrive of the ISO (using this guide: Install Windows 7 From USB Drive/Pen Drive ) but since I'm on Win XP on my current computer, DiskPart doesn't work in the same way. I therefore cannot do this, at least not in the manner described in that guide. Talking of DiskPart, I called up the command window in the Win 7 installer, and it shows NO drives at all. In the ASUS EFI BIOS, I have chosen boot priority for the DVD drive, and the two hard drives can be seen from there (although the SSD cannot be chosen as a priority for booting, which is weird, and possibly linked to this problem?).
I got an error at the windows 7 Expanding files 27% Mark. Installation missing required files windows custom install fail.
View 16 Replies View RelatedI'm trying to install Windows 7 64bit. After loading windows 7 setup from my dvd drive I get the error "Required CD/DVD drive device driver is missing." From doing a lot of research, it seems this error has nothing to do with my DVD drive but has to do with the SATA Controller Driver. So I try to load the 64bit drivers for the SATA controller and it finds them okay but when i try to install, it says something like "no new devices found". The SATA Driver(s) are the only it ever finds, except for the time I enabled Raid... Then those drivers showed up as well but with the exact same results.
From another forum I was directed to this microsoft page: [URL] and the resolution says: "To workaround this issue, disable AHCI mode for your disk controller in the system BIOS. Typically the controller has to be changed from AHCI mode to "IDE" or "ATA" mode. "
My motherboard is an Asus P5N-E nForce 650i SLI Chipset LGA775 FSB1333 DDR2 Mainboard. However, I can not find anyway to change the setting from AHCI mode to IDE or ATA. As far as I can tell, nothing in my bios allows me to change that setting... or at best it's unapparent.
I have the 64 bit windows 7 home prem CD I keep getting stuck on this screen I have formatted to a clean drive (seagate 40G).
View 1 Replies View RelatedI'm stuck at a screen installing windows 7 where it says "a required cd/dvd drive device is missing." when i'm trying to install windows 7. I can't see a hdd to select to install windows on.
View 1 Replies View RelatedWhen attempting to install Windows 7 on my computer (it currently has Ubuntu Desktop 12.04 installed, and has no CD/DVD drive), I get the following error; Quote:A required CD/DVD drive device driver is missing. If you have a driver floppy disk, CD, DVD, or USB flash drive, please insert it now.Note: If the Windows installation media is in the CD/DVD drive, you can safely remove it for this step.I am installing it via a USB stick (copied the install files from my Windows 7 disk, due to the fact there is no CD/DVD drive). I've tried the common Internet solutions such as re-insert the USB stick, and try another USB port, none of the aforesaid have worked.
View 7 Replies View RelatedI'm trying to install win 7 but when ever I try I get the message that a required CD/DVD driver is missing and then the installation won't continue until I locate said driver.I have tried installing with a dvd which was burnt from a downloaded image. I have tried mounting the image to a usb and installing from there.I've searched topics on the internet that suggest all sorts of things but none of them have worked for me.
View 5 Replies View Relatedhow can use same program file in two operating system?
View 2 Replies View RelatedI have a toshiba laptop running on windows 7. One day I turned it on and it said "bootmgr is missing press ctrl alt delete to restart."I have been researching how to fix it and have made a repair cd, which boots it and sends me to the start up process, but when I get to the command prompt option and type "bootrec/fixboot" it says "the volume does not contain a recognized file system."
View 6 Replies View Relatedinstalling Windows 7 on a virtual machine.I have 178MB RAM (which I know isn't enough), but it does the Starting Windows screen before the installation, but then it comes up with this error: File: windowssystem32configsystem Status: 0xc0000001 Info: Windows failed to load because the system registry file is missing, or corrupt.
I have no other OS on the virtual machine.
1. Same computer in my signature/specs except for the optical drive.
2. Hardware passes Windows 7 compatibility test.
3. The install DVD can be read properly. Creating an ISO image of it works perfectly. No read errors on the disk itself.
4. The optical drive is practically brand new, the cable is brand new, never had any I/O errors using this drive.
5. RAM passes MS memory testing 6 times. 0 errors.
6. Windows 7 Ultimate install fails at the same point, during file unpacking, 3 times. Says files are missing or corrupt.
The install disk was created at home from an ISO download, student licensed Windows 7 Ultimate, 32 bit but I don't think that really matters. See #3.Is there anything else left to look at? Any ideas why this won't work?
With the Mann vs Machine update for Team Fortress 2 coming up, I want to upgrade my drivers.Everytime I try to update my drivers via the official site I get an error message in the middle of installing, it says that a .INF file is missing.So does anyone know how I can update my drivers properly?
View 1 Replies View Relatedtell me if a re-install from a system image file on my notebook is as good as a clean install from say a retail disk.I can not format all my drive and start a fresh. Can my System image file become glitchy or infected with a virus.?
View 5 Replies View RelatedI built my computer a few months back, and it worked just fine. About three months ago, I got two 3TB and put them in RAID 0 along with my four SSDs (which were also in RAID 0). When I hooked up my hard drives, Windows stopped booting. It installs, but when it restarts to finish the installation it says "missing operating system." I tried reinstalling it in every way imaginable: With only one of the hard drives, no RAID, just one SSD, using the hard drive, using a USB dvd drive, etc.
the parts:
Cougar GX 1050W
Z77A-GD65
i7 3770K
GTX 680
32 GB RAM
4x 120GB SSDs in RAID 0
2x 3TB hard drives in RAID 0
LG 14x BluRay drive
I have been trying to install Windows 7 Professional x86 several times, and always encounter the same problem.
I downloaded Windows 7 via the MSDN Academic Alliance and then copied all files to a recently reformatted 4Gb USB stick.
Then I changed the BIOS settings on my computer to boot from the USB drive, and it boots and then starts. When i press on the Install button however, it says its starting the install but then quickly and the following message appears;
"A required CD/DVD drive device driver is missing. If you have a driver floppy disk, CD, DVD, or USB flash drive, please insert it now.
Note: If the Windows installation media is in the CD/DVD drive, you can safely remove it for this step." The message also allows me to browse for said missing drivers, but i cant find any drivers anywhere.
i am installing windows 7 in my system but its displaying cd/dvd drive is missing. i tried my best to solve this problem through registry by deleting upper filter and lower filter.. still the problem exist... i need all your support to over come my problem
View 1 Replies View RelatedI recently purchased a new Toshiba 1tb HDD. My old WD 1tb HDD has been giving me trouble of late. I occasionally get the BSOD. Also, on occasion, when I reboot the computer it automatically runs the chkdsk program and reports several bad clusters. However the chkdsk program never seems to flag the bad clusters, so periodically, when I reboot, it runs and reports them again.
I would like to image or backup all of the files on my problem HDD, then do a fresh install of Win 7 Ultimate 64bit (my current OS) to the new HDD, then restore the cloned or image system and program files to the new HDD. I don't want to have to go through the process of reinstalling everything again, when everything seems to be working okay. Since the Win 7 image program makes and exact image of the HDD, then to use that program would cause the new install of Win 7 Ultimate 64bit to be overwritten by the image restore. Therefore, if there should be corrupt data under a bad cluster from the old HDD, that data would not be transferred and my existing problem would be transferred to the new HDD.
On the other hand, if I do a disk clone, I am not sure that the existing programs would continue to operate on the new HDD, and would require a fresh install of each program after the fresh install of the Win 7 OS! I would have then wasted my time doing a transfer of program/data files to my newly formatted and freshly installed OS.
Does anyone know of any program (Acronis True Image, Paragon, Norton Ghost, Macrium Reflect, etc.) that will let you image or clone the program and data (incuding the necessary operational files such as: Win32 system files, activation files, etc.) so that they will work correctly on the fresh install of the OS?
So I have this problem that it would appear heaps of others have:
I have a Kogan Agora pro: Kogan Agora Netbook PRO - Kogan Technologies Pty Ltd
It does have a sata hdd. I looked through the BIOS but couldn't find any places to change the sata settings to AHCI or raid.
I am trying to install from a usb key (using an ISO I created from an install dvd) but had the same problem with a downloaded iso. Also tried to install using the default language settings (As identified by David76 in another thread) but no luck.
I think it relates to the SATA HDD. I put the drivers for the netbook onto a seperate usb drive which it finds and lists in the box but none of the drivers do anything (hit next it thinks about things for a while then says no new drivers found).
I am really starting to get a bit ticked and regretting my move away from linux. If it wasn't for a few particular programs I use that don't work on linux i would have given up ages ago.
I have a Windows 7 PRO 32 Bit OS License and DVD media.I am building a completely new PC - AMD Processor;Gigabyte Motherboard; SATA hard drives; a pair of SATA DVD Recorder/Player drives; memory, etc.The configuration is able to boot the Windows 7 Pro installation.The installation apparently progresses until the following message appears."A required CD/DVD device driver is missing.If you have a driver on a floppy disk, CD, DVD or USB Flash Driver, please insert it now." I am unable to locate the CD/DVD device driver I need to allow the installation to proceed.
View 4 Replies View Relatedi have the same problem with "A required CD/DVD drive device driver is missing. If you have a driver floppy disk, CD, DVD, or USB flash drive, please insert it now.Note: If the Windows installation media is in the CD/DVD drive, you can safely remove it for this step."i have a dell mini 10 (1012) & it doesn't have a dvd drive. i have Windows 7 home premium (upgraded from starter). i made a bootable usb stick (downloaded iso file from mintywhite & then made the bootable stick). that process worked fine.when i try to do the re-install, however, get the message noted above. i read on another post to 'disable the raid function in bios'. i also tried downloading ALL my dell drivers & tried the re-install with them on another flash drive stuck in the machine.
View 2 Replies View RelatedI am trying to install Win 7 Home Premium on a different HD, I have the original install disks, I boot from the DVD drive and the files load as usual but after selecting language I get the message: A required CD/DVD drive device driver is missing. How do I resolve this? And also is there any advantage to installing 64 bit, my processor does support it.
View 1 Replies View RelatedI have a Dell XPS , bought it 2 weeks ago , all good , but when I tried to re-install the nvidia graphics driver the windows crashed, and the boot system was down.Tried to fix it , couldnt , and I didnt make a backup either so I went for the format. At the moment the HDD is clean and when I try to install windows7 i get the following error:"Load Driver:a required dvd drive device is missing". I tried everything that I found on this forum/google related to this problem but with no success.
View 4 Replies View Related2 days ago my Windows software changed on a restart and now tells me it is not genuine. I followed the steps to re-enter my product key and receive this error: Software Licensing Service reported that the computer BIOS is missing a required license. Error code: 0xc004f063.
Here is my MGA Diag tool validation report:
Code:
Diagnostic Report (1.9.0027.0):
-----------------------------------------
Windows Validation Data-->
Validation Code: 50
[Code]....
I just got done with a new build.. brand new SSD harddrive and when my windows 7 is loading the setup I get stuck when i'm choosing the drive to partition. It gives me a few menu pop ups that begins with the "required cd/dvd drive device driver missing".. then it doesn't show any of my drives to format on.
My harddrive does appear in my bios..
My computer crashed a few months ago due to a brown out and, as a result, windows 7 ultimate had to be reinstalled from a boot disk. Once it was re-installed, We put my serial number in and it worked fine (just as it had before). My integrated graphics on my motherboard went out so when i got my GPU up and going, my computer gave me this error and will not let me put in my serial. At the bottom of my screen It displays hat this copy of windows is nott genuine, even though i know it is. Each time I repeat the process i receive the same error code. I don't quite understand what I am reading in the other forums. I just want to get this computer running.
View 2 Replies View Related