Where Are The Ntldr, Boot.ini Files Located In Windows 7
Feb 9, 2011
where are the ntldr, boot.ini files located in windows 7, and windows vista? if there are no boot ini, where is the boot loader found in the c drive? do not need to know about bcdedit. i just need to know location of the ntldr file of windows 7 and vista. or any other files related to boot loading and startup.
View 7 Replies
ADVERTISEMENT
Jan 7, 2012
I have just built my first pc, and I am stuck at installing windows 7 . Here's what happens, I am trying to install off a USB stick as I don't have a dvd drive for this build. It will load into the setup and it'll stop on a screen requiring me to load drivers.
Here is what it displays:
"A required CD/DVD drive device driver is missing. If you have a driver floppy disk, CD, DVD, or USB flash drive, please insert it now".
So I found drivers for my mobo Asus M5A97, I select them and then after I click next this message appears: "No new devices could be found. Make sure the driver files are correct and located on the driver installation media".
I don't know what to do! I've tried all I can think of!! Nothing seems to work! I am trying to install windows 7 Ultimate 64 bit, I've tried installing windows vista 32 bit, and its been saying the same thing as well! I found the drivers here: [URL].
View 3 Replies
View Related
Dec 3, 2012
So I recently upgraded from windows xp to windows7, I went about installing well the wrong way. I Installed windows 7 from the downloaded file onto a empty hard drive I had attached to my computer. I did this all while xp was still running. Anyway it worked and windows 7 always booted up and worked just fine. But NOW!! I removed the attached hard drive where xp was installed and I try to use win 7 but it says NTLDR is missing at startup
View 7 Replies
View Related
Feb 13, 2012
I have used wintoflash to make a bootable usb to install win 7 but when I restart the pc to begin the installation I received the messege ntldr is missing
View 1 Replies
View Related
Mar 1, 2012
I have two disks 0 & 1 in my PC & each has two partitions. I had first installed Win xp on 1st Partition of Disk1 & checked the system is running perfectly. Afterwards I installed Win7 on 1st Partition of Disk 0 & checked the system booting/working in Win7 perfectly but now I can't acces my Winxp. Whenever I try to boot from Disk 1 it gives a message "NTDLR missing".
View 3 Replies
View Related
Aug 31, 2010
I created a new partition, and accidentally made it my primary partition (C: being my primary one and D: being by other one) now whenever I boot up I get NTLDR missing ctrl+alt+del to restart. So I downloaded the windows 7 repair files from one website and tried to fix it, but I failed and now I wanted to know is there any other way I can fix using command prompt or will I just have to reinstall windows 7.
View 4 Replies
View Related
Mar 11, 2012
Well, i ve had the XP for quite some time and got the trial win 7 version installed.The XP is on a PATA drive. The 7 is on a new SSD OCZ drive. Windows 7 boots everytime (after i manually select it) when the PATA is connected. Once i remove the PATA, change the boot order from it to the SSD - NTLDR Missing. I want to remove the PATA drive from my system but it wont load the 7 without the XP
View 3 Replies
View Related
Dec 21, 2012
I want to install Windows 7 home premium and got the ISO done with windows 7 usb download tool and unetbootin. When i try booting the USB i get "ntdlr is missing or corrupt press ctrl alt delete to restart"
I swiped the whole HD so there is no current partition on it. The usb is new and fat32 formatted with the 3GB windows 7 iso imgage on it..
View 1 Replies
View Related
Sep 1, 2012
Windows XP have eula.txt,where is the windows 7 located?In which document or dll?Just curious.
View 2 Replies
View Related
Jun 23, 2011
Hard Disk 1 = Windows Xp
Hard Disk 2 = Windows 7
Windows7 now bootable, can i possibly boot from XP again? warloc70 has chosen the best answer to his/her question.Click here to view the answer that was selected.
View 5 Replies
View Related
May 5, 2012
Computer Specs:
CPU: I5-2400
MB: Asus Pz868
Ram: Corsair 8GB Vengeance LP
Using on board VIdeo For now
Maxtor HD Sata
WD Raptor Sata
HP Lightscribe DVD-r Drive Sata
Problem I was having once I completed my new build with old system parts was as listed in title. It started out as select proper boot device, and now it states ntldr is missing. From what I have been reading it seems as if my partition with my windows 7 install is not set active. I do not have my windows 7 DVD only my old vista DVD. I tried to boot into it to make use of CMD and attempt to make my partition active but I was unsuccessful to even get into CMD. I went into bios and forced booted from the drive with the OS and still same error, also I attempted to disable the other sata and run the computer again with no success also. Look forward to hearing from someone soon. I will be sitting by my laptop all night until this computer gets running.
View 5 Replies
View Related
Jun 27, 2011
I have 3 physical hard drives, we'll call them A, B, and C. Hard Drive A has a partition for Windows 7, a NTFS partition for storage, a EXT3 (Linux), and swap (Linux). Hard Drive B has 1 NTFS for storage. Hard Drive C has 1 NTFS for storage. I am trying to replace Hard Drive B (with nothing related to Windows 7 on it) and when I try to boot into Windows with my new blank drive installed I get "NTLDR is missing." From what I've read NTLDR was only used up to Windows XP. The drive I am trying to remove isn't even associated with Windows 7 anyway. When I put Drive B back in everything works fine again. why I cant remove drive B even though it has nothing to do with the physical or logical drive containing Windows 7?
View 4 Replies
View Related
Nov 14, 2011
I'm trying to install win7 from a usb (created from windows 7 usb dvd download tool) onto a formatted drive. I keep getting ''NTLDR is missing press ctrl + alt + delete to restart'' on my screen. Every 'solution' i've come across so far requires me to have some sort of boot disk or a previous version of windows on the drive. neither of which I have.
View 1 Replies
View Related
Jun 5, 2010
I want to backup my Windows Live Mail address book or contacts but I could not find its folder.I thought it would be at C:UsersUser nameAppDataLocalMicrosoftWindows Live Contacts{36 characters folder name} but this folder is empty. Next I tried C:UsersUser nameContacts. This folder is also empty. I did a file search for *.wab but could not find any.Where is the address book or contacts folder located in Windows 7?
View 9 Replies
View Related
Apr 26, 2011
put together my barebones system, installed Windows 7, and everything was great.Then Iinstalled Sony Vegas 10. The next time I tried to boot up, I got several BSODs and couldn't boot in any mode. Everything was not so great.After trying a few things, I formatted the HD in the hopes of starting fresh.Upon first bootup, I got a message saying that "NTLDR is missing."I've tried using the boot CD & USB method described [URL]but it hangs up in a DOS-looking screen on a line that says "[0.762735][<c01034a7>] kernel_thread_helper+0x7/0x10"So that's where I am right now.
View 14 Replies
View Related
Jan 3, 2012
have been trying to get Windows 7 back in full shape but no luck. First i have no optical drive so i had to do a repair disc on USB. And it worked. So i deleted my Linux partition and extended the C: volume but when i tried bootrec.exe /FixBoot i got ""volume does not contain a recognized file system" Hmm so i tried bootrec.exe /FixMbr and that worked! After some messing around in DISKPART i managed to get Windows booting again. But now my Bootloader is located at SYSTEM D: and when i try booting without the USB Repair it wont start Windows.
View 5 Replies
View Related
Jan 13, 2012
Had a dual-boot system (Win 7 on drive 1, XP on drive 2) installed. Got an NTLDR is missing error on the primary WD drive on which Win 7 was installed. XP wouldn't boot either because the MBR is on the primary drive. So, I had to reinstall XP and all the software on the 2nd drive and test in original and another computer. Worked fine. When plugged into the motherboard, the Win 7 eSATA drive is not recognized by either of the 2 computers in the BIOS. It won't boot and I can't even look at the drive to see the contents - it's a non-entity as far as Windows is concerned. I plugged it into a Mac with an external eSATA to USB adapter and the Mac saw the drive but said that it was unreadable and asked if I wanted to format the drive. Since I thought I might want to try to recover files, I didn't. Anyway to see the contents of this drive with Windows and recover them or does it seem to be dead from the description?
View 1 Replies
View Related
Apr 6, 2011
How do i remove this file from my documents? i have searched my computer and found another NTUSER.DAT file in c:users, I know it should exist in that folder but today i was goin through my documents and found it in there. I don�t understand why i have two NTUSER.DAT files in my Computer especially when they are exactly the same and were created exactly the same time.
View 1 Replies
View Related
Dec 26, 2012
i am registering my kindle, now i am asked for my wi fi password
View 6 Replies
View Related
Dec 25, 2012
this is what I did, since I have no CD-ROM, to install Windows 7 I created a partion X: NTFS and set it as the ACTIVE ONE, the put there the Windows 7 installation files, and opened prompt command to type bootsect.exe /n60 X: , next I restarted my computer, and automatically it booted into the Windows 7 setup, I installed Windows 7 on the partition C: and formatted the partition C:, everything installed and after the installation finished, a multiple choice menu appears that reads:[CODE]
View 6 Replies
View Related
Jul 26, 2011
in the registry editor, where does it store the keys for where a users folder location is so say your Music is is D:<username>Music the registry has all these keys, I need to change them since something happened to one account...
View 3 Replies
View Related
Jan 17, 2013
I am new to computers and studying Networking and had an assignment where I had to load a recording program onto my desktop. I did not know that most people have the desktop in my computer. In the front so to speak but mine is located in CMyNameusers or the same path but also located in the temp folder. My instructor was suprised by this and I was wondering if someone set it up wrong or something. I am running Window 7 home premium on a Gateway NV55S. Is this where the Desktop folder should be located. If not how do I put it in the start menu?
View 1 Replies
View Related
Jul 30, 2012
I imported some video from my handy cam and they were placed in my "imported pictures and Video" file, but when i tried to find them via the search tool accessible by the windows button, it could not find "Imported pictures and Videos". i have spent a half hour trying to find them but the computer seems to have no such file called "Imported pictures and videos". Of course, I checked my regular videos and pictures file and found nothing... Why is this folder nowhere to be found?
View 1 Replies
View Related
Feb 12, 2011
i can't find the numlock key in my lenovo S10-3 netbook
View 3 Replies
View Related
Dec 2, 2009
When using WinXP - I changed the location of the my documents folder to a shared location, which would automatically enable off-line files for the local my documents folder.
I'm trying to do the same thing with Windows 7. Does anyone know how to accomplish this?
I tried changing the location of the my docs folder in Windows 7 but a duplicate folder which cannot be deleted shows up.
View 2 Replies
View Related
Jun 6, 2010
Just now I lost boot files to boot into Windows 7... I am running triple boot with XP, Vista and Windows 7,.... Now I cannot boot into Windows 7 XP and Visa are OK... I can see and access Windows 7 drive from any of 2 OS but can not boot into it.
View 9 Replies
View Related
Sep 7, 2010
I've just recieved Windows 7 Ultimate but when I try and boot it from the CD it comes up with the error message'NTLDR is missing press ctrl alt del to restart'.The confusing part of this is that I've not yet installed the OS, this is after I select which drive to boot from, but before the Install page comes up.I've also tried installing from my current Windows XP OS, but when I do so it comes up with the error code 0x80070490 ~ which means it can't 'Find a location to store temporary installation files.'[code] It's not a matter of me burning a bad .iso file as I bought the DVDs whole from Microsoft, so I neither downloaded or burnt them.
View 9 Replies
View Related
Dec 6, 2012
Whenever I encounter a boot error like these, my first course of action is to scan the hard drive. I have done too many re-installs that have failed, fixes that only 1/2 work, and so on and so forth because the hard drive has been bad. So, the question is, are these stored right at the beginning of the drive? Or is there not specific place for them? Essentially, if I scan the first GB Of a HDD, and it doesn't find any errors, is it safe to assume that the NTLDR or the BOOTMGR isn't corrupt as a result of a defective HDD?
View 3 Replies
View Related
Aug 16, 2011
I installed Windows 7 again after a couple months on XP, and I was just getting everything moved and copied from my secondary hard drive which stores my Acronis backups, and all of my data.The last thing I did was install Acronis, which wanted me to restart my PC. No problem, it worked just fine. Made a backup, and turned on Acronis Startup Recovery Manager (ASRM)... Everything worked perfect until I restarted for some reason, I don't remember what it was... I got NTLDR Is Missing, press Alt+Ctrl+Del to restart So I did, and it came up again, and couldn't find a way to fix it...Even trying to use "fixmbr" from a Win2000 disc's console didn't work, which usually, it fixes things like that.... I set it down for the night...Woke up, and had the strange idea of unplugging and removing the hard drive that contains my data files and Acronis Secure Zone.... And wow, It worked...how can I plug my hard drive back in and be able to boot up? Remove Acronis? Turn off ASRM?
View 3 Replies
View Related
Jul 12, 2012
I recently installed windows 7 on my Seagate hdd while the Samsung hdd was connected.Unfortunately,my samsung hdd is starting to die so I have to remove it for RMA. But when I remove it,my pc shows ntldr not found.While when I reconnects the Samsung hdd,it boots normal. Does it means that the Samsung hdd contains the bootloader files.If so,How can i transfer them to my seagate hdd(the one which has the OS) to allow the pc to boot without the Samsung hdd(faulty one)..
View 3 Replies
View Related
Feb 18, 2013
The ordinal 459 could not be located in the dynamic link library urlmon.dlll
View 1 Replies
View Related