I have a system which installed some boot files (i.e. Boot manager, Memory Tester and Windows Legacy OS loader) on the lowest numbered drive D: (the rest of course on C: which is the RAID partition where I want everything). I now know I should have disconnected the "D:" drive when I set the RAID up.
Anyone know of a sure-fire way of moving these files over without risk from D: to C: and then I can demote D: and remove the drive?
this is what I did, since I have no CD-ROM, to install Windows 7 I created a partion X: NTFS and set it as the ACTIVE ONE, the put there the Windows 7 installation files, and opened prompt command to type bootsect.exe /n60 X: , next I restarted my computer, and automatically it booted into the Windows 7 setup, I installed Windows 7 on the partition C: and formatted the partition C:, everything installed and after the installation finished, a multiple choice menu appears that reads:[CODE]
View 6 Replies View RelatedI installed Windows 7 X64 on my system where I first had a Vista installed on a 60GB partition on partition C of the first drive in the boot sequence. (two partitions C + D) And I have two other drives with only data H and P
When I installed Windows 7 I formatted the C partition and it installed flawless.
Then when I wanted to back an image, I found out that Windows 7 placed the bootmanager on the P drive. Removing the P drive an trying to fix it with the repair after booting from the DVD resulted in a message that this operating system was not supported. ?
After much searching I found that I could copy the bootmgr to the C drive.
Now my windows starts again as normal from the C drive. But I can see it is using some loader parts from the previously installed vista.
I would like to gave also this loader from Windows 7 but I cannot find how to get this done?
Is there anyone that has a clue?
I installed windows 7 x64 RC a while back, and it detected windows xp and set up a dual boot. All was well.
I had a PSU failure, and i replaced the PSU. I set the BIOS to boot from the drive with windows 7 on it. It wouldn't boot. I set the bios to boot from the drive with windows Xp on it, and it booted to the dual boot screen.
Apparently, windows 7 placed the boot information on the old XP drive, so if i try to boot to windows 7 from the windows 7 drive, its a no go.
Now, this wouldnt' bug me so much, except that i want to replace the Xp drive with a larger 1tb drive. I don't need XP anymore, and do need storage (xp drive is 160gb). if i remove the XP drive, windows 7 won't boot. How can i fix this?
FIX (with SavePart, tried other partition utilities and editing MountedDevices to no avail)
Hope this helps someone else with Wrong Drive Letter Problems
Installed Windows 7 RC and all was well with XP Dual Boot.
After some experimenting(BSD,LINUX,etc), Windows 7 would not boot, so popped in the DVD and let Windows 7 repair the boot.
Windows 7 now booted, but when booting XP on E: , it was now assigned the wrong Drive letter D: and would boot to just before the Logon Prompt and hang(same in safe mode.)
After much research and trial (including editing the HKLM/SYSTEM/MountedDevices hive of the XP install from within Windows 7 to change the drive letter) this was the fix.
This particular XP boots from Partition/Drive E: in Windows.0 directory (yeah, i know, been this way for years)
FIX: (FREE!)
downloaded SavePart "AKA Partition Saving " Partition Saving
Boot from a FreeDOS Floppy or USB stick and run SavePart.exe
within SavePart (navigate with TAB key, Selected items turn BLACK)
Choose:
Update Windows 2000/XP/Vista Registry
then
Choose element where boot configuration are stored (Disk number 0, in this case)
then
Choose element where boot configuration DATA are stored (Partition) where the XP(2000 or Vista) is located
then
Select the Directory where the XP (2000 or Vista) is located (Windows.0 on D Drive, in this case)
You then have access/ability to the change Drive Letters for that particular Windows Installation:
In this case:
Drive D (which needed to be E) and Drive E(which needed to be D)
Currently use WD 1 TB Drive, .5 GB Partitions, for Windows 7 (64 Bit), programs and data (Slowest part of my system). Am buying 120 GB Corsair SSD, drive. Want to put Windows 7 on SSD drive, but keep data and most programs on original drive, now D, How do I get Win 7 to recognize, use programs, and store data on original disk, now D
View 14 Replies View RelatedI got this new computer and at some point I went into the boot option to try and install my PC to it's factory settings but when I opened up the boot option it showed something like this but not exactly:
1. MC43689SGDAL7
2. MATSHITADVD-RAM
This is very random and unusual and I have found no fix and as you should know it should look something like this:
1. CD/DVD Drive
2. USB
3. Hard Drive
4. something else
Even in my Bios menu it shows the same thing and I cannot change it so I can't boot from a USB or CD, etc.
I saw on microsoft site that users would benefit by using ssd as boot drive and have users folders and personal data on second drive may be even installed programs. Making backups of personal data easier and also if you have to format the drive with the os you don't have to move personal data. They don't say how to do this (although one place on their site they say go to the folder go to properties and change location of folder, which many people have had issues with this and it doesn't allow you do do this with all folders and it doesn't let you move the users and programs with out issues or weird broken workarounds registry edits).
1.) What I need or what we need to make or find is a step by step guide on how to do a dual drive set up that doesn't mess up the os, and doesn't allow the OS or programs to write to the old location.
2.) Also make a list of everything that could me moved or stored on the 2nd drive instead of on the SSD so that it takes up less room. Or move things to the normal drive that make many reads and writes to the ssd, that would shorten its life span with no performance gain.
3.) Also make a list of the items and fils and folders that would be best on the SSD for performance reasons stability ect, temp files etc., things that would make the computer and OS and programs run quickest.
Additional Information : Windows 7 OS to install on SSD as boot drive or system drive, and have all user files and folders, and maybe some or all program files to install or reside on the 2nd drive normal hard drive. How do you make SSD your primary drive and all data and files on your second hard drive normal spinner hard drive with out registry edits etc.
I have one more problem with my laptop this time . i have a Dell xps 15 , i re partitioned it and made my C drive of 141 GB . i installed all the required application and from the last few days i was watching the there is less space in my C drive than it should be there. i checked out the properties and found out that only 32.6 GB of disk space is utilized out of 141 so there should be around 108 GB free instead it shows me that only 92.9 gb is free .i cleared out the temp folder and there is nothing except 3-4 files which is of some Kbs . then where is the rest 15 GB gone ? is there a virus in my pc which is eating up the space ? i am really freaked out
i have a genuine windows 7 ultimate and microsoft security essential and it is updated and i scanned it and found nothing . btw there is something more , few hours ago there was 94.8 GB free , i installed a game in another drive and i removed it after 2-3 minutes coz i didn't liked it , so after un installing the game i saw there there was 93.4 GB left in my c drive again , i removed files from the temp folder but nothing happened and now there is just 92.9 gb left ! what is happening ! i am really freaked out now
I originally had Vista Ultimate x64 and Windows 7 x64 dual booting fine.
I had a problem with Windows 7 - my fault- needing me to restore an Acronis backup.
I still am able to dual boot but Windows 7 now uses the Vista boot up sequence up to the Welcome screen, i.e. it does not show the sexy new dots morphing into the Windows Logo.
Any ideas where to look for an answer.
Cleaning up the friend of a friend's completely virus infested, badly working computer.
Windows 7x64 HP Pavilion g6 Notebook PC
The Basics:While I was beginning to install and manually offline-update various anti-malware tools so that I could begin to determine what I needed to do to get this thing clean and properly operable, I noticed while looking at Programs and Features that many of the install dates for various software were dated in various months in 2013. My installations were 1 year, 2 days ahead of the current date. Windows Explorer shows this to be consistent throughout the files and folders installed.
Looking at the install dates for some of the HP proprietary software/bloatware, I can tell this behavior started some point after the computer was purchased and used (the bloatware installation date was one day after the warranty start date listed in the BIOS). I am presuming dates on files and folders created, modified, or accessed from the point of the initial occurrence of what caused these particular incorrect future timestamps are the only ones affected.
The clock and date were wrong by the exact amount forward as were the install dates for the files I installed, so, as expected, the files were taking their timestamp from the computer's time. I assume whenever the computer date and time were maladjusted is when the problem started. I fixed the time and date, but the files and folders did not adjust their timestamps, again as expected.
1. Are there any particular problems I am not considering which could be caused by the incorrect dates, other than some particular searching and arrangement issues, which in this case I think would be superficial? This type of date information is just descriptive metadata for files and folders, correct?
2. Is there any way to fix this? I cannot think of any, but maybe there is something I am missing, hashing it out in my mind. If the BIOS clock and the Windows date and time settings were separate and the date metadata were generated based on a timer referencing the BIOS clock, then I could see a way to repair this. But, at least on this notebook, a change in one is reflected in the other--I think this is how Windows OSes operate in general. Anyway, any ideas?
3. Finally, after I finish cleaning and repairing the notebook, is there any way to globally reset all of the date metadata on all files/folders to reflect the present? So long as having incorrect future timestamps does not affect operation, then this is superficial, but it is irrationally driving me crazy. If it were my computer, I could not stand it--barely can stand it as it is. I have found a program that lets you reset all of the dates of all files in a folder, or the dates of all folders visible when opening a directory or subdirectory, but not both simultaneously, and so of course not anything that would change the dates of all the files and folders nested within one another from root.
Keyboard laptop writes wrong letters for wrong keys
View 2 Replies View RelatedSo I've decided that I want to use a Western Digital VelociRaptor 150GB for my Win 7 OS C-drive and my WD 500GB drive as my E-drive for files.
The problem is that I thought of this after installing it on the 500GB drive.
Will it be okay to reinstall on the new drive if I delete Win 7 on the old one?
If so, is it pretty simple to reformat a drive with an OS on it?
I decided to built a new custom made computer and would like to know if I can just attached the old sata hard drive to the new motherboard?I read that I have to have the same motherboard for the hard drive to work or else it will reformat the hard drive, is this true?
View 2 Replies View RelatedI wish to have a method to install windows 7 (Or any OS for that matter) from a hard drive that contains just the installation files. I am aware of creating system images, ghosting and that whole scene but it's such a long winded process compared to just burning the CD again (Original is in storage and no I don't want to go get it ).
Pretty certain this can be done with some kind of DOS program that is loaded from the drive: When it is selected as primary boot. However, I have no experience with programming DOS applications, or if this is even possible (Pretty sure it is given DOS boot rom's exist).
[URL]
Okay, I'm dual booting Windows 7 right now, as drive G: (Vista is C: ).
My problem is that installers like to use C: rather than G:, is there a setting somewhere where I can make my absolute main drive G:, rather than C:?
Some installers correctly use G:, while others (NSIS based, some others) use C: -- perhaps it's an installer issue, I don't know.
When I try to install Microsoft software, the installer extracts temporary files.. okay, but it extracts them to my external drive, and often they are not removed. How can I stop that from happening?
I had my old hard drive installed in my Windows 7 computer. It worked for several months but now it started booting from the old drive that still has Windows Vista on it. My simple fix has been to unplug that drive while booting it up. Can I just delete the Windows Vista files?
View 7 Replies View Relatedmy computer has been dead for the last few days so to speak. For two days ago I turned on my computer - it started up just like any other day. I saw the Desktop and bang, blue screen of death. This has not happened since I installed Windows on my new SSD Harddisk (I'm running with two disks, one SSD for Windows and a HDD for everything else), so I simply started my computer again. (My computer worked just fine last weekend, no problems at all. I had a Windows Update and then this happened..).During the set-up it stopped after the Motherboard-image - I had to chose between starting Windows Normal or repair it. Starting Windows normally does not help - it just give me BSOD right before or right after hitting the desktop. (Sometimes even before the Welcome-screen). So choosing to repair Windows during the setup is the only thing I can do.
By doing so, Windows searches for errors. I get the following error codes: 0x0 0x490 ..and some with 6 f's.(Today and yesterday I only got 0x0, which apparently stands for 'unknown').Hitting F8 during setup and loading Windows in safe-mode (/secure mode?) does not help either, I get BSOD here as well.I have tried to change the boot location (different disks and from CD). As a standard, its booting from my harddisk - all though it's booting from the wrong disk (the HDD). When I'm choosing the SSD I can't get any further and I get the message: "Missing Bootmgr..". The only way to boot the computer correctly (and maybe fix the missing boot manager) is by booting from a Windows 7 CD. I get the same two options (Normal / Repair) when booting from the CD though.. When I chose repair it seems to be fixing something - but in the end it says it couldn't find any errors. I have also tried to enter the following commands into the CMD: Bootrec /fixmbr Bootrec /fixboot Bootrec /rebuildbcd.The first two are completed with no errors or messages. The last one is unable to find any Windows installations (this happen when using both C and D).
I am able to use a safety backup copy which I took when I all out of sudden got access to the computer.. (Don't ask my why or how!), that is however not solving the problem, it's only allowing me to load the computer once. When it's loading it's checking the disk first and then loading normally -- I just tried that for a few minutes ago and my screen just turned black.
I have set up a Windows 7 machine that shares out a hard drive as a network share along with printers to our network. On another computer I was mapping the network drive and accidentally entered the wrong credentials (wrong user name) and choose the remember credentials setting, and it would not let me map the drive.
I tried to go back in and remap the drive again but Windows is remembering the user name/password and I can't map it. I can map the drive from any other computer just fine. Does anyone know how to make Windows forget the credentials so I can map the drive?
After a hard drive failure on a 500 GB hard drive, I restored the image onto a new 1TB hard drive.
Windows is showing the C: drive with 224 GB and partition D: with 225 GB.
I'm guessing that Windows doesn't know that it's on a 1TB drive now, so how do I get access to the missing 500GB?
I had an issue where Windows 7 would not boot anymore, getting error, BOOTMGR missing, Press Alt-Ctrl-Del to restart. I have tried to repair with windows disk but still getting error. I have decided that I want to just do a reinstall but I want to get on and export my favorites and grab a couple other things. I used to have a CD that I could use to boot up with (Think it was called Barts Boot Disk, Been too long) to get into Windows XP and do a couple things. My question is, is what is the best boot disk that will allow me to copy files from the HD to my external drive before I refresh?
View 4 Replies View RelatedI have noticed that a number of videos in my archive have disappeared. It is not a high percentage of the videos, just one here and there. Diagnostics show nothing wrong with the storage drive, nor anything else that I can think of. At first I thought it must have been due to me accidentally deleting a file, or not really having saved it as I thought that I had, but I now know that is not the case. I'm accustomed to what usually happens when a file becomes corrupted, it just becomes unusable, but still remains visible to the file manager and other programs, but I'm wondering if it might totally disappear?
View 9 Replies View RelatedIs there a way to make SFC use the Windows 7 DVD for files to be replaced instead of the files on the hard drive?
View 9 Replies View RelatedJust now I lost boot files to boot into Windows 7... I am running triple boot with XP, Vista and Windows 7,.... Now I cannot boot into Windows 7 XP and Visa are OK... I can see and access Windows 7 drive from any of 2 OS but can not boot into it.
View 9 Replies View RelatedRecently my wife caught a virus on her computer (HP touchsmart windows 7 home premium). Your typical virus program that sends hundreds of pop up screens and says click this for full removal, blah blah blah. Anyways I used malwarebytes to see if the program could be removed, malwarebytes found 5 problems and I removed them. Afterward I noticed that there were no icons on the screen, I tried to bring up task manager and the computer rebooted. once the computer rebooted, there was a black screen with "no operating system found".
I tried the "repair your computer" option on the Windows 7 disk, but it was not able to repair the problem automatically, I also tried some manual command scan prompts that I found on the net. None of this has worked so far.
I figured that I would take the hdd out of her computer and dock it to another computer. The hard drive connected fine, but when I tried to open it there was nothing in there. I tried to make sure that all files were not hidden (they weren't). Funny thing is when I click on properties for the drive it shows that the drive is 2/3rds full but I can't see any files or information when I try to search the drive. I also just tried copying the hard drive to another harddrive and it was copying files but once I opened the new location, it was still empty (even thought the folder said in properties 84 gigs).
Is there something that I am missing, I would like to retrieve all of her documents, pictures etc. then I could reformat that drive and re-install windows if I can not get it to boot back up correctly.
2 months ago, I installed windows 7 pro with no problems at all. Fast forward to today, I decided to reformat because the boot would get stuck in the middle of trying to boot into windows, it wouldn't flash the windows logo. I didn't think much of it so I just reformatted. This is where my real troubles began.So I reinstall windows 7 pro with no problems (the boot disk is in there the cd drive the entire time) I install my programs and what not and install my updates. All 100% Fine. Then I take out the boot disk and restart again... and I get this error message saying:
Nvidia Boot Agent 229.0525
Copyright 2001-2005 Nvidia Corp
Copyright 1997-2000 Intel Corp
Client Mac Address: 00 30 1B BC1F59 GUID: 12973077-FFFF-FFFF-FFFF-FFFFFFFFFFFF DCHP....
Then I press escape, then it says this:
PXE-EA0: Network Boot Canceled
PXE-M0F: Exiting Nvidia Boot Agent
DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER
So the first time I got this error, I just thought, Oh, something must have happened no big deal, so I reformatted again and again. But I kept on getting the same exact error. It'll load into windows just fine when my install disc is in the cd drive, but when I take it out, that error pops up. *My windows is authentic, each time I have been able to validate my copy.* I have tried installing from my hard drive and from the install disc with same error.*
This is my current set up:
Shuttle XPC SN27P2 (Barebone) Comes with motherboard, PSU, and case.
AMD Athlon 64 X2 5200+ @2.6GHz 65W
PNY XLR8 GTS 250
OCZ Reaper Memory 4GB PC-6400 DDR2-800
WD 74GB Raptor
WD 640GB Internal
WD 2.0TB Internal
WD 1.5TB External
WD 400GB External
Cavalry 1.0TB External
Shuttle 450 Watt PSU
Logitech G15 + MX518 + FuncPad 1030 Blk on Blk
Sony Optirac 18x DVD-/+RW drive
Dual Samsung SyncMaster 225BW 22" LCD Wide Screen Monitors
So how can I get windows to boot up with out having the boot disk in the cd drive...It worked the very first time I installed windows 7 on my PC...
I'm really hoping I find an answer to this question besides the one I've found on the internet a hundred times over (That's not a good idea, you shouldn't do it).
My question is: Is there a way to allow a user to create/edit files in the C drive (system drive), and in the Program Files contained there? Let's assume that this user is not only a local admin, but a domain admin as well.
The reason for this is I work for a company that does a lot of editing within these areas of Windows. We need to be able to create and edit files where they are stored. I know one way around we've found is to copy the item out of the folder, edit it, and put it back, but this is a pain in the butt.
I also know that most program need to "run as admin", so that's not the problem either. I've given this user every right and permission in the Security tab of the C drive, and had it propagate down through all files, folders, and sub-folders, and still I'm hit with an error that says "Access is Denied" or another one saying that I don't have the right privileges.
Please, if anyone knows how to change this in 7 it would be much appreciated. I know that this worked in XP, and I'm not looking for someone to tell me "this is a bad idea so don't do it", or "maybe it didn't work right in XP". I have seen enough of these.
UPDATE: I have been playing around with saving office and wordpad documents into the C drive, and into the Program files. It seems that I'm able to do both now (for some odd reason), but I still receive intermittent errors when trying to edit or copy/paste or cut/paste from one location to another.
I was getting notification bubbles in W7 about many of my .exe files being corrupt, including chrome.exe and a few other programs. The notifications recommended that I run Chkdsk, so I went to the C: properties and chose Disk Cleanup, or whatever Chkdsk is called in the menu, I forget at the moment. Well, when I did that, I got yet another notification, this time saying that Chkdsk.exe is corrupt, and recommending that I run Chkdsk (lol). Well, I apparently chose to schedule Chkdsk to run on next startup. But after I shut down to let it run I booted up and after my Dell screen I get....nothing.
Just a blinking horizontal bar, looks like that little input cursor flipped on its side, in the top left corner. I'm running Ubuntu 11.10 on a USB flash drive at the moment, what can I do from here? Until this happened I've never used a Linux OS before so I'm not very savvy with it yet, but when I view my partitions on here (500GB HDD) I see that 451GB is Unknown, in a partition manager there is a red flag notification saying that I have bad sectors, which I already knew. I've heard a lot about running a program called ntfsprogs, but I can't find it. Is there any way to recover my Windows 7 boot without losing any of my data on there?
From the title that i state. i hope some1 can share with me list of windows boot files for windows 7, Vista and XP
View 7 Replies View RelatedI'm away from my new Windows 7 box ATM, but am curious. Has anyone here looked into how Windows 7, out of the box, positions boot files on a HD? Does it simply group them together wherever there is space or does it also position the group on faster outer tracks/cylinders?
View 1 Replies View RelatedI like many others have a dual boot with Vista and now want to delete it. I have read other threads about using "Startup and Recovery" to remove Windows Vista from the Splash screen and then Formatting that Vista partition.
However I have also read something about Windows 7 using boot files from the Vista partition. How do I no if Windows 7 is doing this or not. I believe Windows 7 is the primary boot OS.
