Best Boot Disk That Will Allow To Copy Files From HD To External Drive Before Refresh?
Jan 4, 2012
I had an issue where Windows 7 would not boot anymore, getting error, BOOTMGR missing, Press Alt-Ctrl-Del to restart. I have tried to repair with windows disk but still getting error. I have decided that I want to just do a reinstall but I want to get on and export my favorites and grab a couple other things. I used to have a CD that I could use to boot up with (Think it was called Barts Boot Disk, Been too long) to get into Windows XP and do a couple things. My question is, is what is the best boot disk that will allow me to copy files from the HD to my external drive before I refresh?
anybody else got this problem? anybody able to fix this? seems like a bug to me, not sure though. I also sometimes get the message "you DESTINATION file is too big for the file you are copying!" any solutions also?
As a complete newcomer to Win 7 I've just copied my Favorites from my XP system onto an external hard drive. I can now see the hard drive in Win 7 but I can't see how to copy the files to Favorites.
I am not able to copy files and folders to external hard drive or flash drive. I get the message 'you need permission" etc. But on the same laptop, in vista
Lately I had problems playing video-files (hd content, mkv container) on my WD HD TV. Turned out that the files were corrupted when after copying to the usb disk. First I was afraid my Intel X25-m was the culprit, but windiff proved that the error occurred after copying, and there was a difference between the file on my SSD and the copy on the usb disk.
After trying all the USB ports on my laptop (MSI pr200, T7700, 4GB, Windows 7 HP 64), the CABLE proved to be the culprit. I use different cables, the one causing problems was an old motorola razr....After trying the cable that came with the 500GB Verbatim USB disk the problem is gone, and windiff says the files are equal.Just to let you searchers know (fingers crossed!): issue seems to be resolved by using a good cable.
I'm trying to copy 6,400 songs or 28 GB worth of music from my Seagate External Hard Drive to my Windows 7 PC. At first I tried CTRL+A, CTRL+C and then tried to paste them into a folder called "music" that I created on my "C" drive. That didn't work so I tried right clicking copying and pasting. No luck.I then selected only one folder. That copied and pasted. So I can move about 50 songs at a time. Is this the only way? Or am I missing something? I've done this on other computers with no problems.
Today my Windows 7 laptop wouldn't boot, returning a persistent Windows Boot Manager error 0xC00000e9. It recommended allowing Windows to start in a diagnostic state, which didn't work. I pulled the hard drive and put it in a USB adapter which I plugged into another Windows 7 system. I was glad to see all the normal directories off the root. When I tried to change directories to UsersFrank to copy off some critical files, it said I didn't have sufficient permission. What I need to do to accomplish this? I thought I was logged in as Administrator on the second system while examining the drive. Later I may try putting the drive back into my laptop and booting off a CD to try to repair the disk, but my highest priority is to get some critical files off the drive as soon as possible.
I have a disk with MS Office 2003 on it. My CD/DVD tray is not working right now. I was thinking I might be able to copy the disk to a flash drive and load it that way. Is that possible? How would I do it if it is?
Usually, when you create/rename/delete a file/folder in the directory in Windows Explorer, it will add/renamed/remove automatically without refreshing.However, I have this issue where if you do any of the above, it doesn't refresh until you press F5. I tried to see if its a driver issue by booting into Safe Mode but it didn't work in there.
We are trying to copy/paste files from a CD to a folder on the C drive. But the user is unable to complete this task after hours on the phone. I'm frustrated. It's an easy task, but we can't get it.the user inserts the CD.The user can browse to the CD and find the files, but there is no Edit menu, no way to Copy the files to the C drive.how to copy files from a CD to the C drive.
When i am trying to copy any file from the lap top to pen drive, it is not copying. it is giving a message that administrator permission i am not understanding how to copy files to pendrive
I've bought a Toshiba STOR.E D10 Zwart 1,5TB so that I can use e-SATA to connect it to my laptop. I've got a HP Probook 6555b with Windows 7 64bits. When I use the USB connection (this hard disk has both USB an eSATA) all works fine, no problem at all. When I connect it with the eSATA cable I can find the external hard disc and brwose through the files that are on it. However when I try to move files from my laptop onto the hard disk (or the other way around) after about 10 seconds it slows down and stops half way copying. Next Windows Explorer is not responding.
i have files and folders in my external hard drive- transcend 320 GB. but now it is almost full with the documents. i want to delete some folders and file but it is not possible to delete. How to delete my documents in my transcend external hard drive?
Operating System: Windows 7 Professional 64 bit Laptop: Lenovo X301 Problem: Failure when attempting to copy boot files
I keep getting Failure when attempting to copy boot files when running the following command after imaging a new laptop:
D:WindowsSystem32cdboot d:Windows
How do i get this sorted out i have created a custom windows 7 image which will be deployed on all new laptops, but i need this to work oh and the reason its D:Windows is that for some reason imagex allocates the sysyem partition on the hard drive as C: and the Windows partition as D:
By mistake my external hard disk formatted by clean and clean. How to recover my all file Inside now when I connect the pc its detecting hard disk but not showing its connected.
I'm having a strange problem in Windows 7. The problem is that basically, anytime I want to copy a file to the C: (OS partition), Windows asks me if I want to continue copying a file there (I am an administrator so I don't know why it should). Also, if I want to download a file to the C: partition, it won't allow me and it'll tell me I have to save it in my username folder, not in the C: root. According to the persmissions, administrators have full control but I'm still asked if I want to copy files.I've tried assigning users to have full control but I get a series of messages like "This file is currently in use, cannot set permission" and access denied for "Program files, Program Files (x86), Windows and C:".
I've an all-in-one computer but would like to mirror the hard drive with an external usb drive, main hd 1T internal and 2T external partitioned into 2x1T one for mirror and other for data. Is this possable, running 7 Ultimate.
I created a backup and image (Win 7 Pro) on an external (USB attached) HDD and then created a Windows 7 System Repair Disk. I then booted from the repair disk and the attached external drive is not visible.
The external drive is attached via through a hub, does it need to be attached directly? Is their a generic USB Mass Storage Device driver that I can load?
I was hoping that by creating the repair disk that all necessary drivers would have been loaded to the disk, but apparently not.
to create a recovery media on WD external HDD of Windows 7 from the recovery partition on my sony vaio VPCEH25EN laptop. i'm unable to do so from VAIO CARE since it only asks for an optical drive or USB flash drive, so it's not detecting it as a usb flash drive.
I have a Dell inspiron 1545 with a pretty measly hard drive of 135gb. I have an old hard drive from another laptop which is 320gb and i'm wanting to upgrade. I have done this before but i just used all the installation disks to reinstall windows and everything onto the new hard drive. This time however, i want to be able to copy the whole contents of my current hard drive onto the new one so that when i swap them over and i boot up the computer it contains the operating system, software and files that are currently on the 135gb hard drive. I presume there is some sort of wires, software and housing that i might need to achieve this. So far i have been pointed in the direction of this software pack (Apricorn EZ Upgrade Universal Hard Drive Upgrade Kit (SATA and PATA 2.5" Notebook Drives) Deals, #EZ-UP-UNIVERSAL - Expansys.com UK) but i was wondering if there was a cheaper way to perform the required task.
I was also wondering if the new hard drive will affect battery life. The new one spins at 7200rpm compared to the old at 5400rpm.
I broke my screen on my laptop, I bought another laptop (Acer Aspire one) exactly the same and I want to transfer some files over from my old laptop to the new one. As the screen doesn't work I have removed my hard drive from my old pc I want to attach it to my new pc and drag and drop the files from it to my new pc. But I don't know what cord to by to transfer the files over from my old hard drive to my new pc..
