External Hard Disk Formatted Mistakenly - Any Way To Recover Files?
May 26, 2011
By mistake my external hard disk formatted by clean and clean. How to recover my all file Inside now when I connect the pc its detecting hard disk but not showing its connected.
My harddrive have 3 partitions. I accidentily formatted the one that I need. The Windows files are not in there, but almost every programs that I installed is installed in that partition. Now, I could launch any program, it says Avast snxhk.dll is missing. If I try to launch a portable program from my use, I get this "file system error (-1073741515)" message. What should I do?
Today I accidentally deleted my folder on the desktop of windows-7. The files are not there in the Recycle Bin. There are some .pdf files and .jpg files in the folder which is too important for me. I just copied the folder with files from external source. Now, I don't have that external source from where I can recover or get my files. Which software will work to recover the folder. I tried some recovery software which works for the files. I am not able to find any files. It shows me recover the files which are deleted before a week. But, i am unable to find the files which i deleted today (Shift+Del).
I don't know what is my problem because is not the first time that usb external hard drive is working fine until get damage and said " it need to be formatted " and lost all the INFO because I have to format again the disk to be usefull. Also it is not the same hard disk.
I've bought a Toshiba STOR.E D10 Zwart 1,5TB so that I can use e-SATA to connect it to my laptop. I've got a HP Probook 6555b with Windows 7 64bits. When I use the USB connection (this hard disk has both USB an eSATA) all works fine, no problem at all. When I connect it with the eSATA cable I can find the external hard disc and brwose through the files that are on it. However when I try to move files from my laptop onto the hard disk (or the other way around) after about 10 seconds it slows down and stops half way copying. Next Windows Explorer is not responding.
I have a 1tb external hard disk which was working fine till yesterday. It fell down last week. After that, I transferred two files (total of 25gb) from my laptop into the external hard disk yesterday. The problem started after that. When, I tried to open any of all the files (a total of 11 including the two I transferred yesterday), it's suggesting to be formatted. The external hard drive is recognized in the disk manager to be healthy. Currently, I have turned the Easeus Recovery software on, it's showing 12 hours to be completed.
I have an external hard drive that was formatted in NTFS on an XP machine not too long ago. It is a 160 GB Western Digital. It has been working great on windows 7 for a couple of weeks. Just today it won't let me access the drive and it is telling me that I will need to format the drive before I can use it. I have so much important data on here. I am really worried about losing it all. Why is this happening?
Running Windows 7 Home Premium 64 byte. Have a 1 tb external Seagate drive connected with USB 2. Disk capacity is showing 925GB. Have lost 75 GB. Is there a way to recover the the lost 75 GB?
I just put about 25 gigs of data on this drive. It's an 80 gig drive and has about 20 gigs of space left on it before it's full. Out of all the files I cut and pasted over it got stuck on this last ISO file.. it refused to move this file.. so i stopped the move operation, and rebooted. I never had any trouble with this drive. It's a drive that is hooked up via a USB port. On reboot, to try to copy or move the file again, Windows tells me this drive cannot be accessed and needs to be formatted before it can be used.
Had a power failure during a recovery of an Acronis backup on my C: drive. It seems it happened while Acronis just started loading the backup files? When I restarted the Samsung Laptop local drive C: did not appear in Explorer. Only drive D: and my DVD drive E: appeared (C an D are partitions on the same hard disk). The recovery software was on a hidden partition but when trying to use the Samsung Recovery facility it say Drive C: not found.After trying out suggestions found on the internet I only managed to screw everything up resulting in also loosing the D: drive containing my Acronis backup. The laptop did not start at all. I at last managed to get it going after installing Windows 7 again and I then sit with only C System Disk, D System reserved and E: DVD drive at that point.Foolishly I shrinked the system disk C and created a data disk. That disk is now Data Disk F. and not D as original.The Acronis backup containing all my files and data was on the original Data Disk D:I have used various free software to try and find that specific file. But they all search by drive and the missing file must be somewhere on the disk either as lost or wrong drive letter or something.
I am using Windows 7 OS. I had two logical partitions, E & F. I saw an unallocated free space on my disk. I tried to to mount unallocated drive to another
logical drive , it asked for the folder,where I wanted to mount I gave one folder in E drive. it asked if i want to format...i said
no. and thats all,process completed! And just then I saw there was no other logical drive left...neither E nor F. Now I can see only C drive and nothing else. how to recover my hard drive and the files now?
I changed my motherboard and disconnected all of my drives apart from the one I thought was my C drive. Alas it was not and had some very important folders in it.I started to install windows and got to the drive option and formatted it and as soon as I had I realised which drive it was. I did not go any further with the installation so nothing has written over it.Can anyone advise what my options are if any to recover this drive?
i quick formatted my usb key with the bitlocker key on it and i cant seem to find it using recovery software.I have used recuvra, recover my files, and pc file inspector and i still cant find it....
my computer crashed when my brother turned it off while eagle eye was reading. i had to reformat the drive and I lost all data, including kodak easy share software. I was not able to restore the program because the installation disk is missing. How can I restore kodak on my computer
basically the other day I manged to accidentally quick format my 2TB storage drive. After using some software to see what files I could recover I saw that it found a 150Mb $MFT file. Seeing as all the files are now nameless and will be a heck of a job to get back in working order is it possible to just put the previous $MFT file back on the drive so it actually knows where the data is located.
I want to recover my data after I Had formatted the computer .first Ithe desk was four partitions after that it became one partition. which is the best programme to recover the old data
I have drive on my hard disc (f contains my important data, and I encrypted it using bitlocker program which comes with windows 7 , accidently the drive had been formatted and the drive was locked (data is encrypted), I tried to recover the data using some recovery software but it's not Working because the data is encrypted and the SW can't see the data , please any one can help or advise to solve that disaster , I lose very much important data and I don't have backup .
Note: I have the password and the recovery key that decrypt the drive but I don't know how to use it because the drive after format back to its normal condition (bitlocker set off)
I formatted my encrypted hard disk of 500 GB by mistake for 2 to 3 seconds.Now, it is not opening. Instead it says---" Disk structure is corrupted and unreadable". What should i do open it?
I'm in need of a software ( free/trial/or paid) to recover my important datas that is collected since 10 years!It happened to a laptop with win 7 installed.It had 4 partitions. One boy copied datas from c: drive to d: drives.Now the datas were in d: e: f: drives.Now the boy installed win 7 formatting the c: drive only. witnesses say the installation showed individual drives.I was not present that time.After installation win 7 shows only one drive - OS C: with the whole drive as one partition with win 7 installed in it.Now how can I restore the datas There was about 130 gb data in d: e: f: drives.
I had encrypted my C drive with bitlocker. It worked fine for 5 months.After 5 months it was giving problems, so I took help from brother which suggested to reimage the machine with Windows 7.I did the same, however during installation of Win7 it showed drive C and Drive D. I deleted the Drive C and its gone, tried to refresh the windows however still was not there, so now installed Win7 on only remaining drive.I had 500 GB of hard disk divided in 2 partitions. Now I only see 224 GB in My Computer.I don't want to recover my data from encrypted drive; however I need that space of 250 GB.
I recently installed a program to allow my PC to read Mac formatted hard disks.However, it did not work and from then forward, my PC is unable to detect all other external hard disks, I've tried a few. The drives are not even showing on disk management. The lights on the hard disk do light up with I plug them in but nothing happens.
I have Windows 7 Professional 64Bit installed on a 250GB internal hard drive. I also have a 750 GB secondary drive installed in the system. When I connect an external hard drive to the computer and try to transfer some files (in this case a Windows 7 SDK DVD iso), the external hard drive self ejects and the transfer gets interrupted. The very next second the hard drive comes back on. I have made sure that it is not the external hard drive at fault as the same issue occurs with my flash drive and also my friend's external hard drive (with different files.) I usually did not care and retry it, but recently I have been loosing files when the hard drive ejects itself and it has started to get annoying. Sometimes the file just dose not transfer no matter how many times I try. All that happens is the hard drive gets disconnected and connected again till I just let it be.
Am unable to read or write in my hard disk.. every time it shows msg saying not accessible. i tried to format but even that is not happening. i tried using cmd prompt. but no use.
I've an all-in-one computer but would like to mirror the hard drive with an external usb drive, main hd 1T internal and 2T external partitioned into 2x1T one for mirror and other for data. Is this possable, running 7 Ultimate.