Why USB External Hard Disk Show Now " The Disk Need To Be Formatted"
Jul 23, 2012
I don't know what is my problem because is not the first time that usb external hard drive is working fine until get damage and said " it need to be formatted " and lost all the INFO because I have to format again the disk to be usefull. Also it is not the same hard disk.
By mistake my external hard disk formatted by clean and clean. How to recover my all file Inside now when I connect the pc its detecting hard disk but not showing its connected.
My external hard disk up until a few weeks ago had been working perfectly. The next time I used it - windows 7 will not recognise it. I have tried different USB ports and computers. But it doesn't seem to work. It doesn't show up in device manager or disk manager. Its like nothing is plugged in. I tried switching hard disk cases and power supplies. But still nothing. The hard disk seems to try and run every so often, the light flashed red and it makes whirring noises as if it was connecting to the computer.
I dont know what else to do ? And it has almos 1500 GB of data.
I would like to connect my 2.5" external USB hard drive permanently to store my files. However, it seems like my USB hard disk doesn't show up every time I reboot my windows 7. I will need to unplug the usb and then replug it back it for it to be detected, which is a bit of a hassle.
my windows does not show contents of my hard disk but linux mint do.i doubt if there is any presence of virus and i deleted all .ini files.(unwanted files).and it does not contain any softwares or any executable files. it contain only media,and pdf files.
I have two 250gb drives that are connected to my one Eide connection on my Asus P5Q deluxe Mobo. They show in the bios and on startup, but not in my computer or drive manager? How can I get them to show up so I can format and use them as extra space.
i have brand a new Gateway NV50A with Windows 7 Professional 64 bit. I tried to partition the C Drive with 450GB to make another partition using Spotmau 2009. It displayed a window --that the system needs to restart for partioning. So I clicked on yes. After that it tried to restart and just stops on a blank Spotmau screen doing nothing(Spotmau Powersuite 2009 --Is a computer software used for partitioning and cloning). I tried to restart and bypass this window and start windows. But it doesn't work. I don't want to lose any data. I don't have a Windows 7 Installation CD.
I recently installed a program to allow my PC to read Mac formatted hard disks.However, it did not work and from then forward, my PC is unable to detect all other external hard disks, I've tried a few. The drives are not even showing on disk management. The lights on the hard disk do light up with I plug them in but nothing happens.
I have Windows 7 Professional 64Bit installed on a 250GB internal hard drive. I also have a 750 GB secondary drive installed in the system. When I connect an external hard drive to the computer and try to transfer some files (in this case a Windows 7 SDK DVD iso), the external hard drive self ejects and the transfer gets interrupted. The very next second the hard drive comes back on. I have made sure that it is not the external hard drive at fault as the same issue occurs with my flash drive and also my friend's external hard drive (with different files.) I usually did not care and retry it, but recently I have been loosing files when the hard drive ejects itself and it has started to get annoying. Sometimes the file just dose not transfer no matter how many times I try. All that happens is the hard drive gets disconnected and connected again till I just let it be.
Am unable to read or write in my hard disk.. every time it shows msg saying not accessible. i tried to format but even that is not happening. i tried using cmd prompt. but no use.
I've an all-in-one computer but would like to mirror the hard drive with an external usb drive, main hd 1T internal and 2T external partitioned into 2x1T one for mirror and other for data. Is this possable, running 7 Ultimate.
i'm looking for an external hard disk with a power off/on button ?about usb2 or 3 , i don't mind.i would like a button to power on and when i don't want to use a power off
I am trying to boot windows server installed in external hard disk from my windows 7 pc but when I am trying to do so it my pc is flashing blue screen and my pc reboots with win 7.
to create a recovery media on WD external HDD of Windows 7 from the recovery partition on my sony vaio VPCEH25EN laptop. i'm unable to do so from VAIO CARE since it only asks for an optical drive or USB flash drive, so it's not detecting it as a usb flash drive.
Logitech usb hub is not detecting external hard disk seagate 320 gb fr. i have windows 7 ultimate 64 bit while connecting external hard disk directly to usb port its working but when i connecting this hard disk using logitech 4 port usb hub on the same usb port its not detecting but my pen drive is working through usb hub.
I've bought a Toshiba STOR.E D10 Zwart 1,5TB so that I can use e-SATA to connect it to my laptop. I've got a HP Probook 6555b with Windows 7 64bits. When I use the USB connection (this hard disk has both USB an eSATA) all works fine, no problem at all. When I connect it with the eSATA cable I can find the external hard disc and brwose through the files that are on it. However when I try to move files from my laptop onto the hard disk (or the other way around) after about 10 seconds it slows down and stops half way copying. Next Windows Explorer is not responding.
I made a few months back a backup of my machine(windows 7 64bit edition). The size was like 25gb's so I saved it on my external hard-drive(I bought a case and put a hard drive(Seagate I think) in it). I know want to use this to restore my computer. So I made a system repair disk and loaded it up. However it cannot find my external hard-drive. I have "WindowsImageBackup " in my root directory of my external drive. Yet it still does not see it. I would install some drivers but I have no clue what drives I need as when I plug it into my computer and I am in windows 7 it finds my drive. What do I need to make window 7 recognize my image?
This isnt the first time i use the windows backup to create a system image, ive done it before using this external hdd with no problems at all.But now, for some reason it wont detect this hard drive, it only gives me the option to store the image on a dvd, i dont know why?, i tested the hard drive on a different computer and IT WORKS, i tried to create an image and it does work.