I have a 1tb external hard disk which was working fine till yesterday. It fell down last week. After that, I transferred two files (total of 25gb) from my laptop into the external hard disk yesterday. The problem started after that. When, I tried to open any of all the files (a total of 11 including the two I transferred yesterday), it's suggesting to be formatted. The external hard drive is recognized in the disk manager to be healthy. Currently, I have turned the Easeus Recovery software on, it's showing 12 hours to be completed.
I have an external hard drive that was formatted in NTFS on an XP machine not too long ago. It is a 160 GB Western Digital. It has been working great on windows 7 for a couple of weeks. Just today it won't let me access the drive and it is telling me that I will need to format the drive before I can use it. I have so much important data on here. I am really worried about losing it all. Why is this happening?
I just put about 25 gigs of data on this drive. It's an 80 gig drive and has about 20 gigs of space left on it before it's full. Out of all the files I cut and pasted over it got stuck on this last ISO file.. it refused to move this file.. so i stopped the move operation, and rebooted. I never had any trouble with this drive. It's a drive that is hooked up via a USB port. On reboot, to try to copy or move the file again, Windows tells me this drive cannot be accessed and needs to be formatted before it can be used.
By mistake my external hard disk formatted by clean and clean. How to recover my all file Inside now when I connect the pc its detecting hard disk but not showing its connected.
I was working with two drives and mixed them up on a format. What is on the drive isn't essential, but it would be nice to see what was lost, so I can go from there. Can anyone recommend a way to get it back? It just happened and I haven't put anything else on the drive since it happened. Hit Quick Format, and stopped the formatting about 10 seconds into it, sucks
I have a 1.5TB Seagate ext HD that is formatted as MS-DOS (FAT), this was formatted on my iMac. The Mac internal HD has completely crashed. I attached the ext HD to my Toshiba Satellite laptop, the ext HD does not show in the drive list. It does show in the device manager. It also shows as working properly in the properties menu I need files from this drive. How do I get my Windows 7 system to read the ext usb drive?
I borrowed my friend's external hard drive and a I first connected to my PC it was working perfectly. Yet the second time I tried to my PC recognized it but couldn't open it & it kept giving me the message that I need to format the hard drive before using it. I tried many time on different computers & I got the same result.
While i was formatting my LG 2.5" External HDD HXDS 320GB the power went out. The result is that I cannot use it because Windows want me to format it and it cannot be formatted.
I have a problem for a Mac formatted WD My Passport external drive. PC recognizes the WD Smartware part of the disk but not the data. I want to reformat the whole drive to Windows 7, but I can't see any options to do that.
My harddrive have 3 partitions. I accidentily formatted the one that I need. The Windows files are not in there, but almost every programs that I installed is installed in that partition. Now, I could launch any program, it says Avast snxhk.dll is missing. If I try to launch a portable program from my use, I get this "file system error (-1073741515)" message. What should I do?
.I didn't wait for the computer to tell me it was ok to remove the drive in the usb port. Now my computer no longer recognizes the external drive After removing my external hard drive (without the ok) my computer no longer recognizes the external hard drive. What do I do.
I am trying to access my wife's macbook hard drive via my Windows computer using the Vantec SATA/IDE to USB 2.0 Adapter. The Apple techs said they could not get the drive to register when they hooked it up. However, we gave it a good drying with blow dryerThe adapter works fine and all the correct drivers installedI am in disk management and the 250GB drive seems to be showing up. However, it is not showing up in My Computer and right click shows "assign a letter" is grayed out.
My only Windows DVD was an upgrade disk I used before on the same computer a few months before. I used the command prompt on the DVD to create a NTFS partition for the OS to load onto. After that everything installed and worked fine until I tried to activate use the upgrade key, it says that it can only be for upgrading and not clean installations. I was under the impression that since I already used the key to upgrade on the computer, I would be able to use it again. Will I need to buy a new install disk or will I be able to activate the OS another way? If I do need to buy a new install disk, would it be possible for me to simply find a X16-96072 Windows 7 Home Premium iso and use the activation code that my computer came with to provide the upgrade code with?
I have an internal hard disk not in use ,and I would like to make it as external disk !I looked on the net and I found I should have the " encelsure " butt I think I wont find it here in my city .So is there another way ? like usb -esata cable
Me and my brother built me a new computer from scratch (he did the building - i did the watching). I purchased an internal hard drive from Overclockers UK. It's a Samsung 1TB drive. I also have a 64 Solid-state drive in there as my primary hard drive that Windows was installed on and a couple of programs are installed on. My storage disk (the 1TB disk) is for all my music/films etc. Whenever I drag and drop a file into the Samsung hard-drive - it copies it rather than moves it instantly.When I had a laptop, I had 3 external hard drives and this is the way it copied files onto them.how I can get the internal drive to stop acting like an external drive?
I don't know what is my problem because is not the first time that usb external hard drive is working fine until get damage and said " it need to be formatted " and lost all the INFO because I have to format again the disk to be usefull. Also it is not the same hard disk.
I have a USB external hard drive that I keep all my documents etc on (had it for years)I upgraded from Vista Home to & Home Premium then had to upgrade recently to Professional to run my Sage. Through all these upgrades my ext. drive ran fine. Occasionally the drvie letter would change if I had something else plugged into the USB, this was always easily corected in disk management by changing the drive path.The connection on the case packed up so I had to get the drive put into a new case, now when I plug it in the drive is assigned G instead of F, I tried to change the drive letter allocation in Disk Management but it won't let me as the program still thinks I have a second ext. hard drive which is labelled F. I suspect this has happened because when the usb connection broke the drive was disconnected suddenly instead of a proper eject.How do I get Disk Management to remove the inactive drive - i can't find any obvious way - eject, delete etc are all missing when I click on tools or tasks.
using windows 7 64 bit sp1, using old hd from last pc as external drive, using it for backup, today when I switched it on I get a message telling me it needs to be formatted, why this has suddenly happened, formatting no problem as I still have files on pc, just like to know why this message has suddenly popped up, drive is SATA if it helps,
I just got an external hard drive yesterday, and have been asking a few questions on this forum. So far, people have managed to be very helpful with the previous questions, hopefully someone can do so here too.Reinstalling all my games to external hard drive, need to know if they will / how to make them appear / function properly in my GEF, whether added automatically or manually.I am basically going to have EVERYTHING put onto my 1TB external, and by everything I mean "Music, Pictures, Videos, Documents, Games, and maybe Programs". So, I made a folder for each of those things on it,and only now that I am reinstalling my games into the Programs one have I realized something.I am a bit obsessive about having a fully functioning Game Explorer Folder (GEF) with all my games visible in it. It's my assumption that when I install into an external hard drive, none of those games will be automatically added into the GEF. However, if I add them in manually (using the regedit method in the tutorial), should everything function properly, so long as I have my external hard drive on whenever I use the computer?I just need this to be confirmed before I start reinstalling more. Also, if not, please let me know if there IS a way to get them to show up in my GEF properly, or possibly move the GEF to the external hard drive or get it to recognize things from a different directory.
In order to make upgrading via a clean install easier -- and because I've been considering one for awhile anyway -- I'm looking at picking up a decent external hard drives right now... and can't seem to find a clear answer to something:
Will I see any drop off in quality of playback or computer performance if I use a drive like this (external, USB) to store all of my recorded videos. The tuner and Media center would save everything directly to this drive and play everything directly from it. Would that cause any problems at all? I notice that it requires no power adapter since it's USB powered, and it has a Interface Transfer Rate of 480 Mbps -- not sure how either of these apply to my potential use of it.
Attached an external sata hd with an esata connection. After power boot, external drive not recognized and also secondary internal sata hd not recognized.
Do I need to do something to the BIOS?Sinch stonooka has chosen the best answer to his/her question.Click here to view the answer that was selected.
My windows vista computer died. I have backed it up on and Iomega external hard drive but can't figure out how to restore the information to the new computer which is a windows 7.
I just got a new Packard bell go external hard drive which I used for a couple of days with no problem. btw it has never fell or had any physical damage. I plugged it one day into the PC and it couldn 't be detected in my computer. it shows up in devices and printers and also in disk management. I read on some forums to try and initialize it but it gives me an error saying cyclic redundancy check. I 've tried everything but still not working. this is a new hard drive which has never fell and no physical damage. and please don' t tell me to return it cos it was bought in another country. the only option right now is to fix it?
Running Win 7 home, acer 1800.About a week ago I installed a Buffalo 1.5 TB external drive and automatic back up package, it was working very well, however it now shows as " Not Connected".I have replaced the usb lead but no change in status.It is also no showing up with other drives?Any one had this problem and found a fix?I did a search but found nothing quite like this.
I have a 2TB Seagate hard drive that keeps dropping out in Windows 7. I use it as my main backup drive and when writing to it using either of the two backup apps I use the drive usually "disconnects" and I have to switch it off and on again to use it.I've tried using a different USB port and a different USB cable - same thing. I have run Windows 7 error-checking checking which reports no errors.When it disconnects, device manager shows that it is still connected and working but it definitely doesn't work. For instance, I can double click and open it but it shows no folders. Switching it off and then on fixes this but only temporarily.
