I was working with two drives and mixed them up on a format. What is on the drive isn't essential, but it would be nice to see what was lost, so I can go from there. Can anyone recommend a way to get it back? It just happened and I haven't put anything else on the drive since it happened. Hit Quick Format, and stopped the formatting about 10 seconds into it, sucks
View 6 Replies
How to get data back from formatted drive without recovery
View 1 Replies View RelatedAccidentally I formatted my laptops drive and lost all imported data. I need any software which work for it.
View 1 Replies View RelatedHow to get data back from a formatted hard drive with new partitions
View 3 Replies View RelatedI have a 1tb external hard disk which was working fine till yesterday. It fell down last week. After that, I transferred two files (total of 25gb) from my laptop into the external hard disk yesterday. The problem started after that. When, I tried to open any of all the files (a total of 11 including the two I transferred yesterday), it's suggesting to be formatted. The external hard drive is recognized in the disk manager to be healthy. Currently, I have turned the Easeus Recovery software on, it's showing 12 hours to be completed.
View 1 Replies View RelatedI have a 1.5TB Seagate ext HD that is formatted as MS-DOS (FAT), this was formatted on my iMac. The Mac internal HD has completely crashed. I attached the ext HD to my Toshiba Satellite laptop, the ext HD does not show in the drive list. It does show in the device manager. It also shows as working properly in the properties menu I need files from this drive. How do I get my Windows 7 system to read the ext usb drive?
View 2 Replies View RelatedI have an external hard drive that was formatted in NTFS on an XP machine not too long ago. It is a 160 GB Western Digital. It has been working great on windows 7 for a couple of weeks. Just today it won't let me access the drive and it is telling me that I will need to format the drive before I can use it. I have so much important data on here. I am really worried about losing it all. Why is this happening?
View 4 Replies View RelatedI have a USB external hard drive that I keep all my documents etc on (had it for years)I upgraded from Vista Home to & Home Premium then had to upgrade recently to Professional to run my Sage. Through all these upgrades my ext. drive ran fine. Occasionally the drvie letter would change if I had something else plugged into the USB, this was always easily corected in disk management by changing the drive path.The connection on the case packed up so I had to get the drive put into a new case, now when I plug it in the drive is assigned G instead of F, I tried to change the drive letter allocation in Disk Management but it won't let me as the program still thinks I have a second ext. hard drive which is labelled F. I suspect this has happened because when the usb connection broke the drive was disconnected suddenly instead of a proper eject.How do I get Disk Management to remove the inactive drive - i can't find any obvious way - eject, delete etc are all missing when I click on tools or tasks.
View 2 Replies View RelatedI just put about 25 gigs of data on this drive. It's an 80 gig drive and has about 20 gigs of space left on it before it's full. Out of all the files I cut and pasted over it got stuck on this last ISO file.. it refused to move this file.. so i stopped the move operation, and rebooted. I never had any trouble with this drive. It's a drive that is hooked up via a USB port. On reboot, to try to copy or move the file again, Windows tells me this drive cannot be accessed and needs to be formatted before it can be used.
View 6 Replies View RelatedI don't have Windows 7 yet, but I'm just about to install it, but I figure it may be safe to do a back up first. I'm about to do an upgrade from Vista 64-bit to Windows 7 64-bit. I did find these recommendations:"An image backup of your hard drive offers an easy, dependable way to do just that, since it restores everything on the hard drive: Windows, applications, data, and even the Master Boot Record. To create one, you'll need an external hard drive, and an image backup program.
View 1 Replies View RelatedI purchased a Silicon Power Rugged Armor A80 external hard drive to back up my computer & I can't get it to work. When I try to back up MY Documents, it scans the files, then the window says "wrong input" & "access denied".I have been trying to get help from Silicon Power customer service, but they haven't been able to shed any light on my problem. I'm running Windows 7 Professional & have Norton Internet Security. Could there be some kind of incompatibility with my OS or Norton that's preventing access to the files?
View 1 Replies View Relatedhow do u back up softwares, ccleaner, malwarebytes, on external hard drive?
View 9 Replies View RelatedRecently my laptop crashed beyond repair, and has had to be rebuilt. It now operates on Windows 7.Luckily I had backed up some important files onto a portable external Lacie Hardrive. I now need to return some of the files back to the laptop so that I can use them..but I can't seem to find a way to do it!! I suppose I'm just being 'thick'..but can anyone tell me how to do it.
View 3 Replies View RelatedA few months ago after a hard-drive meltdown I purchased a new Hewlett-Packard computer, with Windows 7 HP (64 bit) as the operating system. The tech who installed the computer said I should be fine to back-up to my Phillips 1 GB external hard-drive using the back-up facility provided with Windows 7 HP. I have made a few attempts to do so, all unsuccessful so far. Each time I get a fairly vague 'generic' error message (0x81000001), which does not really provide specific information:
Check your back-up:
Windows back-up encountered an internal error. Please review your settings and re-try the operation (It then gives the options of re-trying the back-up or changing the settings). I soon realised after my first failed attempt that my hard-disk space precluded me from backing up a system image, so I configured the back-up facility not to include one- but still the back-ups failed. My hard disk drives are thus:
(C) OS: 207 GB free of 919 GB
(D) HP- Recovery (1.45 GB free of 11.9 GB)
(G)'Elements' external HD- 1.20 MB of 298 GB (Basically this is an old back-up of my C Drive to an External HD, the capacity of which soon made it woefully inadequate for my back-up needs!)
(I) Phillips 1 TB external hard drive (921 GB free of 931 GB)
How can i get back my formatted drivers data?
View 2 Replies View RelatedI've been having problems with Windows 7, then I formatted and that fixed the problem. However, is there a way to get my back all of my old files? If so, I'd like to know. I tried using the Emergency Backup and that recovered a couple of my old files. But there are still a lot of files that couldn't be recovered by the backup. Is there anyway I can recover other files that were lost when I formatted? I've tried a few things like Pandora Recovery and EASEUS, but they didn't do exactly what I wanted them to. They seemed to only be able to recover certain file types and not special file types. Any way I can restore all the files I had before I accidentally formatted?
View 8 Replies View Relatedusing windows 7 64 bit sp1, using old hd from last pc as external drive, using it for backup, today when I switched it on I get a message telling me it needs to be formatted, why this has suddenly happened, formatting no problem as I still have files on pc, just like to know why this message has suddenly popped up, drive is SATA if it helps,
View 2 Replies View RelatedI have an external drive that does backups of files for me on a weekly basis through windows, needless to say the backup was getting bigger so I decided to go for a better data storage solution and formatted the external into NTFS. While doing this I also decided to format a USB key into NTFS.THE external drive format took hours, four or so hooked up via firewire. I blamed the issue on the drive and ignored it for the next couple of weeks. The backups didn't work properly they stopped halfway according to Windows even if I let them run 12+ HOURS. Before I formatted it took only 2-3 hours for the backup. I blamed the entire issue on the drive, maybe time to replace it, but I didn't have time to mess with it cause it was simply annoying me.Didn't use the key until tonight. Remember it is formatted as NTFS also. I started to copy a movie file to it, 700mb, it stopped at nearly 89% with 5 seconds left and did not move one bit. I hit cancel and it stayed on the cancel screen for 10 minutes with no resolve. At this point I tried to open a firefox window and it was not responding.......so what did I do I pulled the key and just like that Firefox window popped up and all was well. At that point it hit me, but the external storage solutions are NTFS, could it be my Mobo? Surely not!, Oh Microsoft you make me sad again....Just like with Vista. I reformatted the USB key back to FAT32, transferred a larger 1.4gig file in about 2-3 minutes and had no hangup issues. I can't blame the issue on the mobo especially since it relates to both USB 2.0 connection and the FireWire has the same issue. I guess windows 7 64bit doesn't like external NTFS connections. My windows appears up to date!
View 7 Replies View RelatedRecently I have formatted my Usb External Harddisk with exFAT, as I heard of the benefits of it over FAT32. Its an IMATION Drive with 320gb storage. Device Properties: TOSHIBA MK3252GSX USB Device, The problem is that it takes forever to copy files from the drive as compared to when the format was FAT32. Currently, Im trying to backup all my files on my PC and I've been trying to copy out 60gb of Data that I started 10+ hours ago. The wierd thing is the progress bar moves a fraction and then stops for about 5mins before continuing the another fraction.
View 1 Replies View Relatedas the topic states, my main desktop and my netbook cannot recognize having two identical external hdd's at the same time.It will recognize each seperate,but not both at the same time. The reason i need this is that i am backing up all my WII iso's
both hard drives are WD mypassport 500gb external portables (both powered by USB), and each are partitioned. on one partition its formated ntfs,the other WBFS and both are the exact same like that.
i guess im wondering if its because i named the second hdd drive x and drive z?
i got a warning when formating the second one something like (windows doesnt like when you name the hdd letters like x and z) what i dont get is that both drives can be recognized when plugged in seperately...
By mistake my external hard disk formatted by clean and clean. How to recover my all file Inside now when I connect the pc its detecting hard disk but not showing its connected.
View 9 Replies View Related.I didn't wait for the computer to tell me it was ok to remove the drive in the usb port. Now my computer no longer recognizes the external drive After removing my external hard drive (without the ok) my computer no longer recognizes the external hard drive. What do I do.
View 1 Replies View Relatedi have 8 gp pendrive which is not being formatted
View 1 Replies View Relatedi have a mosebear 4gb pen drive which now cannot be formatted nor edited. adding new contents is also not possible. As i insert my pen drive in usb port a message appears " you need to Format the drive before use... and as i try to format it pushes an error msg you donot have sufficient rights to perform this operation".. I tried cmd command to format it but there it states "please insert a disk in drive i".
View 6 Replies View RelatedI borrowed my friend's external hard drive and a I first connected to my PC it was working perfectly. Yet the second time I tried to my PC recognized it but couldn't open it & it kept giving me the message that I need to format the hard drive before using it. I tried many time on different computers & I got the same result.
View 5 Replies View RelatedI have a fully legal, licensed, paid for etc. version of xp.
I really want to format my hard drives (completely)....my question is:
do I need to re-install my xp, get all the updates (SP2, 3, etc.) before running a clean install of Windows 7 Upgrade Version? Or can I start right from the Windows 7 disc and use my xp key/disc if required?
I know I could do this when going from '95 to xp (yes I'm old).
i accidentally format the recovery drive D in windows 7.
View 9 Replies View RelatedI hooked up a a mac formated drive to my pc. It didnt show up. so I went to disk manager and looked at it in there once. a option box came up listing something about a boot drive or GUID. I picked GUID and down the drive still has the info on it but will not show allow ascces on pc or mac.
View 2 Replies View Relatedmy computer crashed when my brother turned it off while eagle eye was reading. i had to reformat the drive and I lost all data, including kodak easy share software. I was not able to restore the program because the installation disk is missing. How can I restore kodak on my computer
View 1 Replies View RelatedI formatted my C: (win 7 64 bit os), bt on d way realized that my most imp data was kept hidden under C:UsersPrashant , but couldn't help stopping the format.
Now, since the C: drive is formatted , I can't access C:UsersPrashant , so is there any way to recover back my "mostttt imp data"..
While i was formatting my LG 2.5" External HDD HXDS 320GB the power went out. The result is that I cannot use it because Windows want me to format it and it cannot be formatted.
View 2 Replies View Related
