Windows 7 Back Up To External Drive - Generic Error Message (0x81000001)
Jun 7, 2012
A few months ago after a hard-drive meltdown I purchased a new Hewlett-Packard computer, with Windows 7 HP (64 bit) as the operating system. The tech who installed the computer said I should be fine to back-up to my Phillips 1 GB external hard-drive using the back-up facility provided with Windows 7 HP. I have made a few attempts to do so, all unsuccessful so far. Each time I get a fairly vague 'generic' error message (0x81000001), which does not really provide specific information:
Check your back-up:
Windows back-up encountered an internal error. Please review your settings and re-try the operation (It then gives the options of re-trying the back-up or changing the settings). I soon realised after my first failed attempt that my hard-disk space precluded me from backing up a system image, so I configured the back-up facility not to include one- but still the back-ups failed. My hard disk drives are thus:
(C) OS: 207 GB free of 919 GB
(D) HP- Recovery (1.45 GB free of 11.9 GB)
(G)'Elements' external HD- 1.20 MB of 298 GB (Basically this is an old back-up of my C Drive to an External HD, the capacity of which soon made it woefully inadequate for my back-up needs!)
(I) Phillips 1 TB external hard drive (921 GB free of 931 GB)
I have a USB external hard drive that I keep all my documents etc on (had it for years)I upgraded from Vista Home to & Home Premium then had to upgrade recently to Professional to run my Sage. Through all these upgrades my ext. drive ran fine. Occasionally the drvie letter would change if I had something else plugged into the USB, this was always easily corected in disk management by changing the drive path.The connection on the case packed up so I had to get the drive put into a new case, now when I plug it in the drive is assigned G instead of F, I tried to change the drive letter allocation in Disk Management but it won't let me as the program still thinks I have a second ext. hard drive which is labelled F. I suspect this has happened because when the usb connection broke the drive was disconnected suddenly instead of a proper eject.How do I get Disk Management to remove the inactive drive - i can't find any obvious way - eject, delete etc are all missing when I click on tools or tasks.
I was working with two drives and mixed them up on a format. What is on the drive isn't essential, but it would be nice to see what was lost, so I can go from there. Can anyone recommend a way to get it back? It just happened and I haven't put anything else on the drive since it happened. Hit Quick Format, and stopped the formatting about 10 seconds into it, sucks
I don't have Windows 7 yet, but I'm just about to install it, but I figure it may be safe to do a back up first. I'm about to do an upgrade from Vista 64-bit to Windows 7 64-bit. I did find these recommendations:"An image backup of your hard drive offers an easy, dependable way to do just that, since it restores everything on the hard drive: Windows, applications, data, and even the Master Boot Record. To create one, you'll need an external hard drive, and an image backup program.
I purchased a Silicon Power Rugged Armor A80 external hard drive to back up my computer & I can't get it to work. When I try to back up MY Documents, it scans the files, then the window says "wrong input" & "access denied".I have been trying to get help from Silicon Power customer service, but they haven't been able to shed any light on my problem. I'm running Windows 7 Professional & have Norton Internet Security. Could there be some kind of incompatibility with my OS or Norton that's preventing access to the files?
Recently my laptop crashed beyond repair, and has had to be rebuilt. It now operates on Windows 7.Luckily I had backed up some important files onto a portable external Lacie Hardrive. I now need to return some of the files back to the laptop so that I can use them..but I can't seem to find a way to do it!! I suppose I'm just being 'thick'..but can anyone tell me how to do it.
My flash drive on windows 7. Says a program is using it. I've tried to see what programs but I don't see anything. Does this happen often or is it just my computer or usb port?
So I installed 7 Pro RTM, and plugged in my external sound card and no dice. I wouldn't normally care as I have a working PCI soundcard, except that its a really really high quality DAC, and it cost me a lot of money, so I'd rather not just forget all about it
On XP it uses just generic usbaudio.sys, it works on macs, linux, etc without any issues. What can I try? I attempted to copy across a windows xp version of usbaudio.sys, but that didn't seem to help (I'm not entirely sure I did this correctly).
I'm trying to copy an audiobook cd to a blank cd. It ripped to windows media player, but when I tried to burn it to a cd-rw disk I got the message "Windows Media Player could not complete burning because the disc is not compatible with your drive. Try inserting a different kind of recordable media or use a disc that supports a write speed that is compatible with your drive." Is there a different type of disk I should be using?
My son turned on his computer and it stated that he has "corrupt files on the "c" drive and needs to check for consistency". When it checks, an error occurs it says bc of a "recently installed program" and "needs to restore" his computer. It then goes to a black screen with only the mouse visible. He re-started in safe mode and tried to restore and it goes to the original message that he has corrupt file son the "c " drive.
I am trying to wipe my current XP installation clean and move on to Windows 7.
I first tried to install the setup.exe (Custom install option of course) from within the XP OS, but soon discovered you cannot do that and wipe out my only partition on C: at the same time.
I don't have a DVD-RW drive to write a boot disk, so instead I am trying to install through my external hard drive. I meticulously followed this tutorial from PC World yet when I instruct the PC in BIOS to boot from the external hard drive, I keep getting an "invalid system disk, press any key" error when the computer boots and looks for the setup files. This is despite the fact that setup seems to work perfectly from within the XP OS.
PC World tutorial: Install Windows 7 From an External Hard Drive - PC World
Can anyone please offer me any helpful advice to get the external hard drive setup to work or help me find a way to install 7 from within XP?
Anyone know exactly why I keep getting the "invalid disk" error each time when I try to boot from my external hard drive? As mentioned in the PC World tutorial, I marked the external hard drive as an active partition and the setup files seem to work fine from within XP. If it helps, in the external hard drive root folder is both the Windows 7 ISO and all the files contained (which I extracted using PowerISO).
It has been a year or so since I got my computer with a full running copy of Windows 7 Ultimate...All of a sudden after about 6 months of owning the computer i get a message when i turn my computer back on saying Windows 7Build 7601This copy of windows is not Genuine.I bought this computer from a guy my friend knew and now i feel like i got ripped off because of this...Is there any way to fix it... tried to contact Microsoft...unresponsiv
This morning while i was watching a movie from my Toshiba 500GB external hard drive, there was a windows update going. Because of the lagging due to the update and all, I restarted it after the update is done while my ext. HD is still connected to the computer.
After restarting, somehow I can't seem to access my ext. HD even though the HD is detected. The HD somehow became a "Local Disk K:" and everytime i try clicking it a pop-up telling me that "K is not accessible. The parameter is incorrect".
I googled the problem and found one solution that told me to run a CHKDSK on the command prompt. I ran a "chkdsk /r K:" but then got stuck on the "stage 3 of 5" where the chkdsk is verifying Usn journal. This has been going on for 5 hours and the cursors still blinking.
I can access my HD again? Does the verifying Usn journal really do take this long?
I bought 2 new 3Tb Seagate Expansion drives model STAY3000300.I tried to "Create a system image" and both 3Tb drives were presented as possible destination discs. I selected one of them and after a couple of messages about preparing and starting the following message was displayed. (same message on the other 3Tb drive as well)The backup failedBIG RED BAROne of the backup files could not be created.(0x8078002A)Additional Information:The request could not be performed because of an I/O device error, (0x8007045D)The system is Windows 7 64bit and bang up to date with Windows update. The system disc is a OCZ Agility 3 120Gb SSD.Another strange thing is I have been doing backups to another external disc for many months - a 1Tb Iomega portable external.The MAIN BU file is about 26Gb and, yes, all my discs are formated as NTFS so it is not a file size issue.
First I want to say that the drive works without problems at the correct speed. The problems come upon disconnect. I also want to to stress that USB 2.0 discs are working flawlessly. If I use safe eject and the look in the device manager I get an error 47 saying that it has been shut down but not disconnected, it also says I can rectify it by disconnecting and reconnecting but this does not work. If I do so the drive will not be recognized. The enclosure has a power switch. After a safe eject I have tried both pulling the USB cable while power is still on and also going the other way by first shutting the power down. In both cases the error 47 shows in device manager. When this happens the CPU load goes up to about 20% and stays that way when it before was around 0 at idle. If I reboot the drive reconnects and I have no problem with it unless I try to safely eject it again.
.I didn't wait for the computer to tell me it was ok to remove the drive in the usb port. Now my computer no longer recognizes the external drive After removing my external hard drive (without the ok) my computer no longer recognizes the external hard drive. What do I do.
I am getting 2 error messages. chronically I get filedeviceHarddisc volume 3$Mft. like every 10 minutes. The other is E:vlc-1.0.5-win32exe. I reinstalled the vlc program and haven't seen that error message for awhile. I checked the hard drive with seagate and it is functioning properly.
I bought Asus laptop recently, with that i got windows 7 OEM OS already installed, but i didn't have any recovery disc or something like that...i've googled out, but i am confused with taking system image backup and with taking recovery disc optionswhat is the difference between those two?what i want is, I want to take the current windows OS as one image (bootable iso image or something like that) so that i can install it, if my windows 7 crashes anytime in future. so that it works as it is in the present state.how to make the bootable image to an external hard disc,
I tried adding my Xbox to Media Center as an extender.
I got the code from the xbox, put it in the pc on media center, and the xbox then said it was downloading something.... It finished as far as I know and went to the screen that says go to xbox.com/pcsetup, well media center on the pc went to the next page where it is supposed to configure the extender, and it froze. I restarted the computer and tried again. Now the xbox is displayed as an extender, but it says it is not configured. If I select it it asks me to put in the code, I get the code from the xbox and the pc goes to the next screen for a few seconds, and then a new one, Configuration Error, an error was encountered while configuring your computer for use with this extender.
I've searched but I cannot find anything that helps... I've looked for a certificate but there is none. I don't see how to remove the xbox from media center completely to start over, and I can't make it add it. I'm only using windows firewall, and allowed all the media center services to go. Not sure what to try next, it doesn't really provide me with any information.
About 6 months ago I had several issues with my screen flickering. I thought it was just an old monitor so I replaces it. No problems, however the last 48 hours my screen goes black then sometimes it will come back on and say that my display driver crashed. I've tried looking around but i see no error reports or anything on the driver. I am using a NVIDIA GeForce 7600 GS. I just uploaded the complete system specs to the website.
Every time I stick a DVD (game/movie) into the drive it comes up with an autoplay box with 1 option, to open the folder to view files. In Explorer the DVD shows up just as a generic DVD - basically as if it were just a blank disc for burning. If I 'explore' the disc there are no playable files, just an empty folder and a notepad document. I can't play the DVD in WMP, or any other player and can't start a game from the disc. This happened once before after burning a CD, the system just wouldn't recognise DVDs. It sorted itself out pretty quickly last time, this time, again after burning a CD, I can't get it to work.
