While i was formatting my LG 2.5" External HDD HXDS 320GB the power went out. The result is that I cannot use it because Windows want me to format it and it cannot be formatted.
View 2 RepliesI have an Iomega portable hard drive, which is compatible with windows 7, however, when running the Iomega Encryption Utility using the reconfiguration option to set a password for the hard drive, it told me you must format this drive before use, anyways, my windows 7 doesnt recognise it anywhere! yet before the encryption ran it did! in disk management it only shows my C drive, the Iomega showed up in my computer as a G drive but it doesnt now. Its like the computer cant see the hard drive! I read about formatting the disk but it wont give me that option when the device is plugged in.
View 9 Replies View RelatedI got a new Seagate 500GB HD (sorry about the wrong thread title). For the first two weeks or so, I could eject my HD through "Safely Remove" but since then I get the usual "Generic volume is still in use" message, inspite of closing all processes that might possibly be using it.I keep the HD connected to my PC virtually all the time, even when I shut down and reboot. But every now and then, I need to disconnect it. And to do that, I have to shut down the computer first and then disconnect it.Whenever I update Windows, I see that a temporary folder is created in the HD while the updates are being downloaded which has led me to think that a process uses the HD but I can't find out which one it is and how to terminate it properly.There are no problems when I use the HD in other computers.
View 5 Replies View RelatedMy portable hard drive is showing all the hidden files and folders on it (the ones prefixed with ".", but not the System Information folder, interestingly). I don't have this trouble with any other drives, or elsewhere on my computer, so it seems somehow to be associated with this specific drive.Of course I check to make sure that "Show hidden files and folders" is turned off.
View 5 Replies View RelatedI have two Identical hard drives [1.5T WD in external caddys with both USB2 & eSata connections]. Both have been in use since I built computer Dec10. Now I plug them in and their not visible anymore? Their shown as a usb or scsi drive but no assigned drive letter or their "name".Their showing in the Disk manager and I found I had to manually tell it to mount and assign a drive letter[then their useable]. I tried another removable drive that was USB2 & firewire and the same thing. USB2 ,eSata or firewire and their all not visable in explorer. Yet I can plug in a flash drive and I can immediately see it once loaded.Is there a switch in registry or somewhere thats controls this.All these drives were immediately available in file explorer previously? Now I am having to use the DM to manually mount and assign them to read/write to them.
View 1 Replies View Relatedhow to recover data from portable hard drive / passporthe USB is not being reconigised by computer
View 1 Replies View RelatedI want to lock the USB ports on a Win7 32bit PC. I have set up Acronis backup software to save to a portable hard drive. how do I lock down apart from a specific item of hardware.
View 4 Replies View RelatedWhen i plug my WD passport portable hard drive into my computer, the hd will start up (the little LED will eliminate) and windows will make the "usb connection" sound and down the bottom right of the screen i have the option to safely remove my passport 0740. So windows picks up my hd but it just wont show up in my computer, it works on my other computer just not this one. i have tried changing the drive letters and that doesnt seem to help. Any ideas? using windows 7 ultimate
View 1 Replies View RelatedI borrowed my friend's external hard drive and a I first connected to my PC it was working perfectly. Yet the second time I tried to my PC recognized it but couldn't open it & it kept giving me the message that I need to format the hard drive before using it. I tried many time on different computers & I got the same result.
View 5 Replies View RelatedI have a problem for a Mac formatted WD My Passport external drive. PC recognizes the WD Smartware part of the disk but not the data. I want to reformat the whole drive to Windows 7, but I can't see any options to do that.
View 1 Replies View RelatedMy harddrive have 3 partitions. I accidentily formatted the one that I need. The Windows files are not in there, but almost every programs that I installed is installed in that partition. Now, I could launch any program, it says Avast snxhk.dll is missing. If I try to launch a portable program from my use, I get this "file system error (-1073741515)" message. What should I do?
View 9 Replies View RelatedCan I install a new OEM of win 7 home on a used but reformatted hard drive?
View 4 Replies View RelatedI have a 1tb external hard disk which was working fine till yesterday. It fell down last week. After that, I transferred two files (total of 25gb) from my laptop into the external hard disk yesterday. The problem started after that. When, I tried to open any of all the files (a total of 11 including the two I transferred yesterday), it's suggesting to be formatted. The external hard drive is recognized in the disk manager to be healthy. Currently, I have turned the Easeus Recovery software on, it's showing 12 hours to be completed.
View 1 Replies View RelatedI am trying to access my wife's macbook hard drive via my Windows computer using the Vantec SATA/IDE to USB 2.0 Adapter. The Apple techs said they could not get the drive to register when they hooked it up. However, we gave it a good drying with blow dryerThe adapter works fine and all the correct drivers installedI am in disk management and the 250GB drive seems to be showing up. However, it is not showing up in My Computer and right click shows "assign a letter" is grayed out.
View 2 Replies View RelatedMy only Windows DVD was an upgrade disk I used before on the same computer a few months before. I used the command prompt on the DVD to create a NTFS partition for the OS to load onto. After that everything installed and worked fine until I tried to activate use the upgrade key, it says that it can only be for upgrading and not clean installations. I was under the impression that since I already used the key to upgrade on the computer, I would be able to use it again. Will I need to buy a new install disk or will I be able to activate the OS another way? If I do need to buy a new install disk, would it be possible for me to simply find a X16-96072 Windows 7 Home Premium iso and use the activation code that my computer came with to provide the upgrade code with?
View 9 Replies View RelatedHow to get data back from a formatted hard drive with new partitions
View 3 Replies View RelatedI have an external hard drive that was formatted in NTFS on an XP machine not too long ago. It is a 160 GB Western Digital. It has been working great on windows 7 for a couple of weeks. Just today it won't let me access the drive and it is telling me that I will need to format the drive before I can use it. I have so much important data on here. I am really worried about losing it all. Why is this happening?
View 4 Replies View RelatedI just put about 25 gigs of data on this drive. It's an 80 gig drive and has about 20 gigs of space left on it before it's full. Out of all the files I cut and pasted over it got stuck on this last ISO file.. it refused to move this file.. so i stopped the move operation, and rebooted. I never had any trouble with this drive. It's a drive that is hooked up via a USB port. On reboot, to try to copy or move the file again, Windows tells me this drive cannot be accessed and needs to be formatted before it can be used.
View 6 Replies View RelatedRecently, I'm unaware of what happened to my Hard disc, If I connect it to my laptop or any other PC, it is asking me to format. I cant even open it, cant ready any data from it....If initiated for error check, to start an error check also, it is asking me to format.
View 4 Replies View RelatedI have a Fantom portable Hard Disk 1 TB.....and I've been using it since 1 Year. Recently, I'm unaware of what happened to it, If I connect it to my laptop or any other PC, it is asking me to format. I cant even open it, cant ready any data from it....If initiated for error check, to start an error check also, it is asking me to format.
View 2 Replies View RelatedI have 3 harddrives the primary i dont care if its formatted, thats the one the OS goes on. the other 2 have all my movies on it (3tb total, 1tb and 2tb drive) will these 2 extra drives be formatted as well or untouched? If they are going to be formated can i just upplug them and plug back in once 7 is installed note if it matters ill be installing Windows 7 unltimate NOT the upgrade?
View 1 Replies View RelatedI use my 4gb USB2.0 flash drive not only in order to save valubale documents, but also for portable programs. Since I got summer job in which my work-computers is changed frequently, I started using portable programs from my usb flash drive. Sometimes my work-pc's do freeze and I am unable to remove USB drive safely, so I corrupt my portable applications very fast.Maybe you know any tricks and tips on how to use flash drive as safely as you can in order to lose that risk of data corruption?I use NTFS file system, would FAT32 or FAT format be any safer in my case?
View 1 Replies View RelatedBy mistake my external hard disk formatted by clean and clean. How to recover my all file Inside now when I connect the pc its detecting hard disk but not showing its connected.
View 9 Replies View Relateddon't want to buy an expensive external optical drive so am trying to think of how to make a sata or ide internal optical drive into an external one for emergencies.anyone know if i can get adaptors for the power and data connections?have googled but no luck.oops found some build ideas on Internet - should have looked there first i suppose
View 5 Replies View RelatedI have an LG portable dvd player. Never had a problem using it before, had some repairs done on laptop and now can not view any movie on laptop, even using power dvd?
View 4 Replies View Relatedi bought my Portable super multi drive some months ago, and now my laptop is becoming lower and lower so i wanna redo it. change an explotation programm as widows XP, i have the portble but i lost my cd. i dont know what to do. so i was wonderinf whever i could download an installing cd by internet, to configure my laptop after changing the exploration system?
View 5 Replies View RelatedI have a player an LG Portable Super multi drive, but cant used it. Its happen when I re program my laptop. How to reactivate this again?
View 1 Replies View Relatedi have 8 gp pendrive which is not being formatted
View 1 Replies View Relatedi have a mosebear 4gb pen drive which now cannot be formatted nor edited. adding new contents is also not possible. As i insert my pen drive in usb port a message appears " you need to Format the drive before use... and as i try to format it pushes an error msg you donot have sufficient rights to perform this operation".. I tried cmd command to format it but there it states "please insert a disk in drive i".
View 6 Replies View RelatedI have a fully legal, licensed, paid for etc. version of xp.
I really want to format my hard drives (completely)....my question is:
do I need to re-install my xp, get all the updates (SP2, 3, etc.) before running a clean install of Windows 7 Upgrade Version? Or can I start right from the Windows 7 disc and use my xp key/disc if required?
I know I could do this when going from '95 to xp (yes I'm old).
i accidentally format the recovery drive D in windows 7.
View 9 Replies View Related