i bought my Portable super multi drive some months ago, and now my laptop is becoming lower and lower so i wanna redo it. change an explotation programm as widows XP, i have the portble but i lost my cd. i dont know what to do. so i was wonderinf whever i could download an installing cd by internet, to configure my laptop after changing the exploration system?
View 5 RepliesI have an LG portable dvd player. Never had a problem using it before, had some repairs done on laptop and now can not view any movie on laptop, even using power dvd?
View 4 Replies View RelatedHow do I install a Super Multi Drive to a mini computer HP 110? I have the device and the installation disk, however, the computer does not seem to be detecting it or providing an installation wizard for me to proceed.
View 3 Replies View RelatedInstall LG Super multi drive install disc for windows
View 1 Replies View RelatedI have a player an LG Portable Super multi drive, but cant used it. Its happen when I re program my laptop. How to reactivate this again?
View 1 Replies View RelatedCan I use the Super Multi Drive Installer which was designed for XP on Windows 7.where I can find the right Software for Win. 7.
View 1 Replies View RelatedIs there a way (or tutorial) to create a repair disc for a multi boot Windows 7/Vista on a USB flash drive? In other words would like to be able to use a USB flash drive in an emergency to boot into a multi boot computer using Windows 7/Vista.
I see where there is a way to create a Vista/XP multi boot USB repair disc but not one for Windows 7/Vista multi boot. Evidently the boot files for Vista/XP are different from the boot files for Windows 7/Vista. I have a 4GB flash drive that I would like to use.
I just built a new pc and when I run cmd as admin and do a chkdsk/f or /r, every time it says the drive is locked, and it will do the chkdsk on sys restart. I am 99% sure I used the same disc for both installs of win 7 x64. Is there something wrong with my install discs or something? Did the files I moved from the old pc have a virus or something in it? Are the drives locked because I didn't partition them correctly? How do I figure out why my drive is always locked?
View 3 Replies View RelatedIs it possible to use the upgrade disc to format C drive (it has the Windows 7 RC activated, I can also reinstall Windows Vista if I have to), and do a clean install?
View 8 Replies View RelatedI have a generic System 7 64 bit system with a 1 TB SATA drive. It has one hard drive which I have partitioned into 4 partitions, with C: being where I put all the system software. The board has mulitple SATA ports.Change considered: cloning the C: partition onto a new SSD so that I can get the performance boost of an SSD. There are some heat problems with existing hard drive so I probably need to change it out, so I would also like to clone the D:, E:, and F: partitions to a new hard drive.I have cloned a single physical drive to another physical drive, and the software (Ghost, or the like) usually handles it ok, so that all I need to do is adjust some partition sizes, and then disconnect the old hard drive and everyting is good. This includes cloning a single hard drive with multiple partitions to being cloned to a new single hard drive with identical numbers of partitions.Compared to my prior experience, is there something different about cloning one partition only vs cloning the whole drive. My proposed plan is:
1) Install SSD
2) clone C: to SSD only
3) clone D: E: F: of old drive to new drive.
4) remove old drive.
I will be getting a samsung N310 for christmas and among the goodies in my stocking will be an external hard drive and some ram, I want to install Windows 7 ultimate 32bit onto it. I am aware the hardware can handle it but I am researching a permanant install of the OS onto the existing built in hard drive of the samsung(XP) from the portable HDD. So far I am unlucky and I cant find a tutorial. Getting the OS is fine, its Installing the bloody thing thats got me all conflustered.
Any Help would be greatly appreciated, and I can provide further information if any one needs it to answer the question.
Installation copiers Multi Boot OS with Multi software?
I have just just purchased some new PC with different configration AMD Phenom II X4 965, Gigabyte 890GLX Motherboard, 4GB RAM, 500GB HDD and 2nd AMD Athalon 635 with Gigbyte 875 Mothboard -4 GB RAM, 500GB HDD.I want to use these machines for Gaming as well as for teaching and for Internet browsing and web site development
What i Did i had Installed Multiple OS Windows XP SP3 32Bit, Windows XP SP2 64 Bit, Windows 2003 server 32 and 64 bit, Windows Vista 32 & 64 Bit, Windows 2008 server 32 and 64 bit , Windows 7 32 and 64 bit.
Now i want to install general softwares like Office, Adobe Master collection cs5 , Autocad, Coral , Visual studio Java, C, SQl Server, Oracle and the list caries on
I want that i dont have to install these software again and again on every software so that the space is not occupied and i can use same program files folder for each and every OS and time is also saved from installing the software.
For that i have seen some installation copiers (backups) which remain in memory before installation and records the information of registry and system files being copied and records and the can again be copied to the different OS.
Is there any ways to do these which installation copier backup is good for doing this . finding such softwares which can copy or backup installation files registries and i can just use the same installers.
I use my 4gb USB2.0 flash drive not only in order to save valubale documents, but also for portable programs. Since I got summer job in which my work-computers is changed frequently, I started using portable programs from my usb flash drive. Sometimes my work-pc's do freeze and I am unable to remove USB drive safely, so I corrupt my portable applications very fast.Maybe you know any tricks and tips on how to use flash drive as safely as you can in order to lose that risk of data corruption?I use NTFS file system, would FAT32 or FAT format be any safer in my case?
View 1 Replies View RelatedWhile i was formatting my LG 2.5" External HDD HXDS 320GB the power went out. The result is that I cannot use it because Windows want me to format it and it cannot be formatted.
View 2 Replies View RelatedI am trying to install Windows 7 Ultimate x64 with SP 1 original unmodified MS Technet ISO to a blank Crucial RealSSD C300 SSD drive and it is taking hours to do that. The last time I did the install it took almost 4 hours to copy the files, I tried it from a DVD drive and from an external USB-HDD and there was no speed difference. After the installation was done, the SSD was very fast though, no problems at all then.
Now I have to install again and I do not want to wait again a half day just for the files to copy. My Mainboard is a ASROCK 870 Extreme 3 , I use AHCI , AMD AHCI Bios is disabled and AHCI is enabled for SATA3_5 and 6 .
I have an Iomega portable hard drive, which is compatible with windows 7, however, when running the Iomega Encryption Utility using the reconfiguration option to set a password for the hard drive, it told me you must format this drive before use, anyways, my windows 7 doesnt recognise it anywhere! yet before the encryption ran it did! in disk management it only shows my C drive, the Iomega showed up in my computer as a G drive but it doesnt now. Its like the computer cant see the hard drive! I read about formatting the disk but it wont give me that option when the device is plugged in.
View 9 Replies View RelatedI got a new Seagate 500GB HD (sorry about the wrong thread title). For the first two weeks or so, I could eject my HD through "Safely Remove" but since then I get the usual "Generic volume is still in use" message, inspite of closing all processes that might possibly be using it.I keep the HD connected to my PC virtually all the time, even when I shut down and reboot. But every now and then, I need to disconnect it. And to do that, I have to shut down the computer first and then disconnect it.Whenever I update Windows, I see that a temporary folder is created in the HD while the updates are being downloaded which has led me to think that a process uses the HD but I can't find out which one it is and how to terminate it properly.There are no problems when I use the HD in other computers.
View 5 Replies View RelatedI am trying to customize my version of Firefox Portable. I am wondering how I can keep it so it doesn't ask or even recognize local plugins that are installed on the host OS? Such as flash, shockwave, etc.
View 1 Replies View RelatedI have a toshiba satellite L750 running Windows 7 home premium, when trying to burn anything onto a blank disc I get as far as selecting my items and asking it to burn but it keeps telling me to insert a blank disc (which obviously I have). I have tried several different types of blank disc but it dosnt seem to recognise any of them.
View 2 Replies View RelatedI have a hp multi function hooked up to a win7pc by usb connection, I also have a laserjet hooked up to my ethernet lan. I am trying to install a hp 3310 with a ethernet connection. The latest Windows 7 hp software gets almost to the end of the install routine until it asks how I want to connect it. I choose ethernet and it checks whatever, it shows my 3310 connections correctly and then tells me it cant connect. Windows 7 add a device cant find it. I can ping the unit ok, and I can connect to it through the ip address, and i can scan through the browser. If i go to win7s add a printer it installs a basic print driver and allows me to print as normal. All other xp pcs on the lan can print to it.I would dearly love to use the scanner on the 3310.
By the way the 3310 worked with all functions when it was connected via usb to a xp pc.
My portable hard drive is showing all the hidden files and folders on it (the ones prefixed with ".", but not the System Information folder, interestingly). I don't have this trouble with any other drives, or elsewhere on my computer, so it seems somehow to be associated with this specific drive.Of course I check to make sure that "Show hidden files and folders" is turned off.
View 5 Replies View RelatedI have two Identical hard drives [1.5T WD in external caddys with both USB2 & eSata connections]. Both have been in use since I built computer Dec10. Now I plug them in and their not visible anymore? Their shown as a usb or scsi drive but no assigned drive letter or their "name".Their showing in the Disk manager and I found I had to manually tell it to mount and assign a drive letter[then their useable]. I tried another removable drive that was USB2 & firewire and the same thing. USB2 ,eSata or firewire and their all not visable in explorer. Yet I can plug in a flash drive and I can immediately see it once loaded.Is there a switch in registry or somewhere thats controls this.All these drives were immediately available in file explorer previously? Now I am having to use the DM to manually mount and assign them to read/write to them.
View 1 Replies View Relateddon't want to buy an expensive external optical drive so am trying to think of how to make a sata or ide internal optical drive into an external one for emergencies.anyone know if i can get adaptors for the power and data connections?have googled but no luck.oops found some build ideas on Internet - should have looked there first i suppose
View 5 Replies View Relatedhow to recover data from portable hard drive / passporthe USB is not being reconigised by computer
View 1 Replies View RelatedI want to lock the USB ports on a Win7 32bit PC. I have set up Acronis backup software to save to a portable hard drive. how do I lock down apart from a specific item of hardware.
View 4 Replies View RelatedMy desktop pc crashed, and after some investigation it turns out that the main hard drive is probably dead... So I thought I would install Windows 7 onto my portable terabyte. Anyway when I tried to install Windows 7 onto my hard drive, I realised 2 things:
- Windows will clear my TB HD when it installs.
and
- Windows cannot install onto a USB device.
I need to install windows 7 on my portable hard drive without removing any data on it. I have tried to partition my hard drive with easyus as a friend recomended, but it says I need to convert it to a logical, and I cant do that because it says something about clearing the HD.
So I have an bit of an odd and I think unique problem (as many searches came up with no solutions). Simply put, my boot manager is missing, but only when my windows install disc is not in the disc drive. It started several months ago and I just left it be, let the disc it int he disc drive and it was not that big of a deal. But just did a clean install couple days ago I re-installed windows 7 ultimate 64-bit on my computer (using an upgrade disc if that makes a difference).I formatted the drive with what I guess is a quick format (the option the install disc gives you). I have tried doing a repair with the install disc but no problems are found every time I try.
View 1 Replies View RelatedWhen i plug my WD passport portable hard drive into my computer, the hd will start up (the little LED will eliminate) and windows will make the "usb connection" sound and down the bottom right of the screen i have the option to safely remove my passport 0740. So windows picks up my hd but it just wont show up in my computer, it works on my other computer just not this one. i have tried changing the drive letters and that doesnt seem to help. Any ideas? using windows 7 ultimate
View 1 Replies View RelatedDoes anyone know of a way to take several different ISO's (multiple Windows ISO'sUbuntu, Hiren's Boot CD, etc.) and put them onto a flash drive from which I can boot and select one?I've tried several different utilities thus far - unetbootin, YUMI,XBoot - but none have allowed me to successfully add all my images.
View 1 Replies View RelatedFIX (with SavePart, tried other partition utilities and editing MountedDevices to no avail)
Hope this helps someone else with Wrong Drive Letter Problems
Installed Windows 7 RC and all was well with XP Dual Boot.
After some experimenting(BSD,LINUX,etc), Windows 7 would not boot, so popped in the DVD and let Windows 7 repair the boot.
Windows 7 now booted, but when booting XP on E: , it was now assigned the wrong Drive letter D: and would boot to just before the Logon Prompt and hang(same in safe mode.)
After much research and trial (including editing the HKLM/SYSTEM/MountedDevices hive of the XP install from within Windows 7 to change the drive letter) this was the fix.
This particular XP boots from Partition/Drive E: in Windows.0 directory (yeah, i know, been this way for years)
FIX: (FREE!)
downloaded SavePart "AKA Partition Saving " Partition Saving
Boot from a FreeDOS Floppy or USB stick and run SavePart.exe
within SavePart (navigate with TAB key, Selected items turn BLACK)
Choose:
Update Windows 2000/XP/Vista Registry
then
Choose element where boot configuration are stored (Disk number 0, in this case)
then
Choose element where boot configuration DATA are stored (Partition) where the XP(2000 or Vista) is located
then
Select the Directory where the XP (2000 or Vista) is located (Windows.0 on D Drive, in this case)
You then have access/ability to the change Drive Letters for that particular Windows Installation:
In this case:
Drive D (which needed to be E) and Drive E(which needed to be D)
After I tried to make a dual boot with Ubuntu and Windows 7 Ultimate (64-bit), Windows now does not boot. I have tried to reinstall and repair the HDD but the disc fails to recognize my HDD (Western Digital Scorpio Black 500 GB). My HDD is Basic, has 3 primary partitions and 1 extended (3 logical). Ubuntu 11.10 can boot fine.
View 2 Replies View Related