Windows 7 Boot Manager?
Nov 17, 2012
I have a windows 7 home premium 64 bit. And when i start the system i get the following message.Boot Manager:Windows failed to start. A recent hardware of software change might be the cause. To fix the problem:1.Insert your Windows installation disc and restart the computer.2.Choose your language settings, and then click "Next".3.Click "Repair your computer."If you do not have this disc, contact your system administrator or computer manufacturer for assistance.Info: an error occurred while attempting to read the boot configuration dataI searched the forums. But unfortunately i don have the installation disc.Is there any other way to get through this.
View 1 Replies
ADVERTISEMENT
Dec 25, 2012
this is what I did, since I have no CD-ROM, to install Windows 7 I created a partion X: NTFS and set it as the ACTIVE ONE, the put there the Windows 7 installation files, and opened prompt command to type bootsect.exe /n60 X: , next I restarted my computer, and automatically it booted into the Windows 7 setup, I installed Windows 7 on the partition C: and formatted the partition C:, everything installed and after the installation finished, a multiple choice menu appears that reads:[CODE]
View 6 Replies
View Related
Mar 11, 2009
How to Change the OS Name in Windows Boot Manager ?
View 0 Replies
View Related
Jan 13, 2013
ihave windows 8 my lpatop is acer aspire E1-531, I am trying to install windows 7 but boot manager wont show me dvd boot !! it show me only network boot what can i do to be able to boot from dvd
View 2 Replies
View Related
May 7, 2010
I tried to install WIN 7 to a NEW HD (clean install) since you cannot do a WIN XP upgrade install. I left my old C: drive (WIN XP) hooked up while I installed WIN 7 to the NEW drive. Afterward I decided that my computer is too slow to effectively run WIN 7 so I took the NEW drive out (WIN 7 installation) and intend to put it in a new faster computer.Now when I try to boot up my old C: drive with WIN XP, I get a WIN 7 Boot Manager. What a PAIN in the A--. How do I get rid of the Boot Manager so my WIN XP will boot up normally?
View 1 Replies
View Related
Jan 15, 2013
on power up the computer goes to a screen and at the top says Windows Boot Manager. insert windows disc. language, repair, Status: 0xc000000f
info: boot selection failed because a required device is inaccessible. So, I hit enter and it always goes back to same screen. I will not let me F8!!! I will let me F2 and F12. I do not have any disc to reinstall windows.
View 5 Replies
View Related
Mar 7, 2009
I have a system running XP. I partitioned my drive in half and installed Windows 7. I tried to start XP again and messed it up. I think it's trying to use XPs boot manager. Do I need to re-install 7 to use it's boot manager?
Now that I know this .iso works great, I want to put 7 on a partition on my main Vista system. I can't afford to lose everything like I did on the XP system. When I tried to start XP after installing 7 I got an error. "windows root system32 hal.dll is missing or corrupt"
I can't have that happening to my main system. Is this normal? Did I do something wrong? Will it happen to Vista?
View 1 Replies
View Related
May 13, 2010
when we compress the disk space entirely by going to my computer --> right click on the c: drive icon ---> properties ---> compress disk drive, the compression utility in win 7 accidently may compress the boot manager files that include the file bootsect.bak and the boot folder also . when the computer is restarted the machine hangs up and says "boot manager is compressed " and shuts down .at the prompt type notepad (since the recovery option boots from a seperate wim image it has notepad built into it ) press ctrl + o which invokes the open file dialog go to the open file field (ALT+N) and type c:oot and also see for the c:ootmgr file. right click it and deselect the option of "compress files to save disk space" when we apply the boot manager is again decompressed. also if someone finds this harder we can directly deselect the compression option by reversing the process used to compress the drive thats it . we are done
View 1 Replies
View Related
Jan 21, 2012
I used to have both XP & 7 & removed XP. I used to have to select from a black & white screen called Windows Boot Manager. Now it shows only 7 and I have to select it. How do I get rid of this screen?
View 1 Replies
View Related
Nov 14, 2012
I'm having an issue where my Windows boot manager is missing. However when trying to repair, there isn't even a win7 installation file on any of my HDDs. However if I search for a driver that may be located in a file, I can view all of my files on my C drive.
View 2 Replies
View Related
Aug 16, 2012
When I start my computer I receive a message that says "Windows Boot Manager: The boot selection failed because a required device is inaccessible.: When I try to use the Windows 7 Recovery Disk to repair the computer I get a blue screen of death. I have a reburbished Dell GX620 that currently runs Windows 7 that I believe orginally had Windows XP.
View 4 Replies
View Related
May 12, 2011
Everytime I start up i get this annoying screen:
1. How do I removed this from my startup
I have set my msconfig right:
and i also did disable here:
What the **** is wrong!
View 9 Replies
View Related
Jan 19, 2012
I am told that the Windows 7 OS uses a bootmgr to boot up windows. Can anyone explain this process in a way that I can understand.
View 2 Replies
View Related
Oct 10, 2010
When I turn on my computer windows boot manager pops out. How to get rid off it? I would like windows to start normally. Should I format my computer? (I did it twice yesterday)
View 9 Replies
View Related
Aug 12, 2009
I had XP with '03 media center edition. I installed Windows 7 over XP, so I was not expecting that every time I now turn on Windows 7 computer I always get the windows boot manager and have to choose Windows 7 to continue booting up. Is there a way to fix that so it does not come up anymore and just starts up on its own. I realize that even if I do not click it, it is already highlighted and will start up on its own after the countdown is done, but I was wanting to know if there was a way to fix that altogether.
Should also mention that on msconfig and boot menu, the only one listed is the Windows 7 OS system and is default.
View 7 Replies
View Related
Sep 9, 2010
I recently installed Windows 7 professional and had some problems with my first install, so I decided to reinstall. In the course of getting everything working on the the second install the Windows Boot Manager comes up everytime I turn on the computer.
It is very strange because: I have only Windows 7 installed on my computer and no other OS. The only selection is one instance of Windows 7 (I know sometimes when you reinstall the same OS will be listed twice, this is not the case for me) there is no countdown timer to automatically start windows. I have to press the enter key or it just stays there. Other than that, windows 7 is working fine for me. It is very annoying since I sometimes leave the computer after I turn it on and when I'm back it still is on the Boot Manager.
These are the things I have tried to get it working: I've went to msconfig-->Boot Tab and looked to see if there was a more than one OS listed. There is only one instance of Windows 7 listed. I went to my computer properties-->advanced system settings-->advanced and set the boot manager to not run, but it still comes up even after I change this setting I also tried reinstalling windows 7 twice. Once with just formatting the partition. Once with deleting the partition and recreating it before the install.
View 2 Replies
View Related
May 10, 2011
How does one edit the boot manager from within Windows 7?
View 2 Replies
View Related
Oct 3, 2009
I have installed Windows 7 on my MSI Wind Netbook using a new Seagate 320gb sata drive and every time I power on, Windows Boot Manager loads and I have to select Windows 7 as the OS even though it's the only OS that has been installed. The first time I installed I let Windows 7 create the partitions but I thought that might have been the problem because of the 100mb system drive it created so I deleted everything, made 2 partitions and installed Windows 7 on the active partition but still it boots into Boot Manager. I've been into msconfig and Windows 7 is the only OS and there is no delay set but still it persists. I've also tried EasyBCD but it made no difference either. The ONLY time it doesn't boot to Boot Manager is if I have the external USB DVD drive connected with the Windows 7 disk inserted... then it says press any key to boot from CD/DVD which I ignore and Windows 7 loads normally.
View 9 Replies
View Related
Aug 30, 2012
How do I make windows 7 boot into a thumb drive?I've tried f8, (f9 like it says when it boots up) and it still won't work
View 7 Replies
View Related
May 5, 2009
I'm having a problem every time I power on the system. I'm dual booting vista ultimate with win 7 build 7100; with vista I have no problem, but with 7 every time I start the system the first boot attempt gives me the error 0xc000000e after the boot manager display: "the boot selection failed because a required device is inaccessible".;after a reset the system boots 7 with no problems. Win 7 is installed in a brand new hd(seagate barracuda 1.5tb) and vista on a second hd.
I've search the web for people with a similar problem with no success. I've tryed already many solutions but the problem persists(latest bios for the motherboard, latest intel sata drivers, etc). I'm hoping that this could be a bug in win 7 instead of a hardware failure for the hd. Again, the strange thing is that this only happen after the power on. After that first error, no matter how many reboots, the system always boot without problems.
View 4 Replies
View Related
Nov 26, 2009
For some odd reason, after doing some changes to my partitions in Windows 7 and restarting my computer, I got the ol' "BOOTMGR is missing" message. I have the Windows 7 Repair Disc image file and a 4GB USB Flash Drive, but, sadly, no CDs. Is there any way that I can put the image file onto my USB Flash Drive and boot from it with my Acer Aspire X1200 desktop computer?
View 1 Replies
View Related
Jan 13, 2012
have beeen reading through this amazing forum for the past couple of days trying to get my Dell 1545 working again, i have tried to reinstall the OS from a disc that came with the lpatop, to no availi created a system restore disk from the machine i'm writing this on....still to no avail....i can get into the setup menu's but like many others i can't get any further, I don't know how to get into the BIOS menu (and to be honest wouldn't know what to do if I did
View 9 Replies
View Related
Apr 21, 2011
I already went to "msconfig" and chose my default OS. Bios still stops at the Windows Boot Manager to show me the only OS there is for me to choose/use. How can I go straight to my desktop without the Boot Manager?
View 2 Replies
View Related
Dec 4, 2011
6 months ago I installed windows 7 on a new PC I built. I then decided to switch to a 64 bit system which I did. I bought another HDD and decide to add a second drive with windows XP.I ended up with a system which had windows 7 shown twice on boot up and only one would bring up windows 7. Windows XP was missing. I removed the second drive and it worked fine but I still had 2 Win 7 prompts on boot up.I have a virus or root kit which I can't find or remove so I decided to format the C partition and reload windows 7. The problem is although I have the bios set to boot from the cd with the Win 7 disk, it comes up with the boot manager missing message and I can't get around this.I tried another HDD and get the same message. How do I get rid of this problem where i can re install win 7?
View 1 Replies
View Related
Oct 2, 2012
I am trying to install Win 7 Ultimate x64 on my roommates laptop. It was having severe issues booting into 7 already so I decided to just wipe it and re-install. I started with a DVD copy and upon boot he realized that his DVD drive was broke. FML. But we can boot from USB so I go buy a large flashdrive and DL a copy of Windows 7 and make it boot-able. So I plug it in and when it starts to load windows files it makes it about 10% and stops.
Then throws an error 0xc00000e9. "An unexpected I/O error has occurred".
Now I know my USB is good, I just bought it. The DVD Drive is messed up but its not being used in any way. It's an older Sony vaio, Core 2 Duo, 2gb ram, the model is burnt off the bottom.
View 2 Replies
View Related
Nov 10, 2012
Recently I changed the boot logo/screen on my computer to a custom one. When I got tired of it and wanted to change it back, I googled how I could restore it. Running the CMD as admin and typing "bcdedit %WinDir% /l en-US" would restore it back to its original boot logo. I tried it and then restarted my computer as instructed. As soon as it starts to boot up I get a message from the "Windows Boot Manager" telling me that there is a file that cannot be recognized: "windows/system32/winload.exe" My drivers for my keyboard are out of date apparently as I cant press "enter" to continue. It told me i could alternatively insert my windows 7 disc and restart. I inserted that disc and restarted and the same screen comes up.
View 3 Replies
View Related
Jan 4, 2013
I am trying to install Windows 7 in Parallels on an iMac, but with no luck. I have spent hours with Apple and Parallels but they cannot succeed in helping me either. It all stumbles on the classic "Boot manager missing". Now, the question is, is it possible that this is because the Win 7 CD is faulty, or does anyone have any other solution? Ctrl+Alt+Del obviously does not work, as I am on a Mac.I have tried using a disk image. No luck.I have tried to de-activate the storage disk, leaving only the SSD with Mac Mountain Lion active.
View 1 Replies
View Related
Nov 5, 2010
Just wanted to reinstall my Windows 7 this morning due to the fact that my dvd writer did not read of write CDs. After some research I learnt that a re-install will do the trick. how I don't know.My system statrt up, loads the windows 7 files and then comes up with the Windows Boot Manager screen stating that it has problems communicating with a device connected to your computer. Status: 0xc00000e9 Info: An unexpected I/O error has occurred.I have tried my 2 SSD drives in Raid 0 and also a single HDD with the same results.My DVD writer is an IDE model, but I can't think that this is the problem since the first time I used this drive and the same original Windows 7 Ultimate Disc there were no problems.I even went as far and got a PS2 keyboard to avoid any USB devices and also downloaded a full untouched version of Windows 7 with the same error! (Maybe my disc got scrtaches after its first use, I don't know)
View 3 Replies
View Related
Sep 7, 2012
Well first of all I started up my PC and it immediately jumped into Startup Repair maybe cause I didn't shut it down properly. It went through the repair and several times. By then I knew something was wrong, I checked the Diagnostics and see what Startup Repair had actually done. It turns out it could not fix an error with the OS Loader.It came up with two error code (0x2) and (0x490).I followed the following instructions:
1. bcdedit /export C:BCD_Backup
2. C:
3. cd Boot
4. attrib bcd -s -h -r
5. ren C:BootBCD BCD.old
6. bootrec /RebuildBCD
I also tried using /FixMBR and /FixBoot However none of these worked and my I tried booting up it came up with the same problem. I went back into the Windows 7 DVD and ran Startup Repair again. It said it was completed successfully but it said also if it doesn't boot then there's something wrong.Which leads to my new error screen that never goes away everytime I switch on the PC. The error message is as follows:A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source.If you have a Windows installation disc, insert the disc and restart your computer. Click "Repair You Computer," and then choose a recovery tool.Otherwise, to start Windows so you can investigate further, press the ENTER key to display the boot menu, press F8 for Advanced Boot Options, and select Last Known Good. If you understand why the digital signature cannot be verified and want to start Windows without this file, temporarily disable driver sginature enforcement.
File: WindowsSystem32Winload.exe
Status: 0xc0000428
Info: Windows cannot verify the digital signature for this file.
If I try and press ENTER it will take me to the boot menu and if I press ENTER to select an OS (I only have one) then it will jump back to the previous screen.
View 9 Replies
View Related
Dec 17, 2011
I have a 64G SSD drive and a 300G hard drive. I set c drive drive to be the whole SSD drive. Cd drive to d: and an e drive to be 100G. (out of the 300G). I am running an AMD phenom quad core with 12 G of memory. I have tried diabling all start programs. I downloaded all of the latest drivers from Gigabyte and also got the AMD series series 7 chip set drivers from AMD. When windows boots, it sits at starting windows for 2-3 minutes and then loads.
I have set custom events for ids 100-110 and it shows nothing or warnings on event 100 with no details. Once the balls become the windows icon, windows brings up my long on. Here is the vital clue, I installed Norton ghost 15. when I copy the drive to a third hard drive, the boot manager comes up. When I select boot windows 7, it load starting windows and then the balls with the windows icon almost instantly. It stays like this way even when I disconnect the 3rd drive. If I remove boot manager, I am back to 2-3 minutes to get past starting windows.
View 1 Replies
View Related
Feb 6, 2012
I just have a quick comment on what not to do when running windows 7. I had just installed 7 Ultimate liked it seemed to be working fine! Then I made the dreadful mistake of compressing the hard drive. In doing so when the system tried to boot back up the system would not load received message boot manager compressed. So make a long story short I had to load my recovery disk and uncompress the hard drive. But why I have never had that issue with any other windows product until Win 7.
View 4 Replies
View Related
